The following sections detail the gas optimizations found throughout the codebase.
Each optimization is documented with the setup, an explainer for the optimization, a gas report and line identifiers for each optimization across the codebase. For each section's gas report, the optimizer was turned on and set to 10000 runs.
You can replicate any tests/gas reports by heading to 0xKitsune/gas-lab and cloning the repo. Then, simply copy/paste the contract examples from any section and run forge test --gas-report
.
You can also easily update the optimizer runs in the foundry.toml
.
Use assembly for math instead of Solidity. You can check for overflow/underflow in assembly to ensure safety. If using Solidity versions < 0.8.0 and you are using Safemath, you can gain significant gas savings by using assembly to calculate values and checking for overflow/underflow.
contract GasTest is DSTest {
Contract0 c0;
Contract1 c1;
Contract2 c2;
Contract3 c3;
Contract4 c4;
Contract5 c5;
Contract6 c6;
Contract7 c7;
function setUp() public {
c0 = new Contract0();
c1 = new Contract1();
c2 = new Contract2();
c3 = new Contract3();
c4 = new Contract4();
c5 = new Contract5();
c6 = new Contract6();
c7 = new Contract7();
}
function testGas() public {
c0.addTest(34598345, 100);
c1.addAssemblyTest(34598345, 100);
c2.subTest(34598345, 100);
c3.subAssemblyTest(34598345, 100);
c4.mulTest(34598345, 100);
c5.mulAssemblyTest(34598345, 100);
c6.divTest(34598345, 100);
c7.divAssemblyTest(34598345, 100);
}
}
contract Contract0 {
//addition in Solidity
function addTest(uint256 a, uint256 b) public pure {
uint256 c = a + b;
}
}
contract Contract1 {
//addition in assembly
function addAssemblyTest(uint256 a, uint256 b) public pure {
assembly {
let c := add(a, b)
if lt(c, a) {
mstore(0x00, "overflow")
revert(0x00, 0x20)
}
}
}
}
contract Contract2 {
//subtraction in Solidity
function subTest(uint256 a, uint256 b) public pure {
uint256 c = a - b;
}
}
contract Contract3 {
//subtraction in assembly
function subAssemblyTest(uint256 a, uint256 b) public pure {
assembly {
let c := sub(a, b)
if gt(c, a) {
mstore(0x00, "underflow")
revert(0x00, 0x20)
}
}
}
}
contract Contract4 {
//multiplication in Solidity
function mulTest(uint256 a, uint256 b) public pure {
uint256 c = a * b;
}
}
contract Contract5 {
//multiplication in assembly
function mulAssemblyTest(uint256 a, uint256 b) public pure {
assembly {
let c := mul(a, b)
if lt(c, a) {
mstore(0x00, "overflow")
revert(0x00, 0x20)
}
}
}
}
contract Contract6 {
//division in Solidity
function divTest(uint256 a, uint256 b) public pure {
uint256 c = a * b;
}
}
contract Contract7 {
//division in assembly
function divAssemblyTest(uint256 a, uint256 b) public pure {
assembly {
let c := div(a, b)
if gt(c, a) {
mstore(0x00, "underflow")
revert(0x00, 0x20)
}
}
}
}
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract0 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 40493 ┆ 233 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ addTest ┆ 303 ┆ 303 ┆ 303 ┆ 303 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract1 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37087 ┆ 216 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ addAssemblyTest ┆ 263 ┆ 263 ┆ 263 ┆ 263 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract2 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 40293 ┆ 232 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ subTest ┆ 300 ┆ 300 ┆ 300 ┆ 300 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract3 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37287 ┆ 217 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ subAssemblyTest ┆ 263 ┆ 263 ┆ 263 ┆ 263 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract4 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 41893 ┆ 240 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ mulTest ┆ 325 ┆ 325 ┆ 325 ┆ 325 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract5 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37087 ┆ 216 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ mulAssemblyTest ┆ 265 ┆ 265 ┆ 265 ┆ 265 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract6 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 41893 ┆ 240 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ divTest ┆ 325 ┆ 325 ┆ 325 ┆ 325 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract7 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37287 ┆ 217 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ divAssemblyTest ┆ 265 ┆ 265 ┆ 265 ┆ 265 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
- TinyBonds.sol:151
- TinyBonds.sol:325
- TinyBonds.sol:333
- TinyBonds.sol:341
- TinyBonds.sol:342
- TinyBonds.sol:354
- TinyBonds.sol:365
- TinyBonds.sol:367
- TinyBonds.sol:380
- TinyBonds.sol:389
- TinyBonds.sol:391
contract GasTest is DSTest {
Contract0 c0;
Contract1 c1;
function setUp() public {
c0 = new Contract0();
c1 = new Contract1();
}
function testGas() public {
c0.updateOwner(0x158B28A1b1CB1BE12C6bD8f5a646a0e3B2024734);
c1.assemblyUpdateOwner(0x158B28A1b1CB1BE12C6bD8f5a646a0e3B2024734);
}
}
contract Contract0 {
address owner = 0xb4c79daB8f259C7Aee6E5b2Aa729821864227e84;
function updateOwner(address newOwner) public {
owner = newOwner;
}
}
contract Contract1 {
address owner = 0xb4c79daB8f259C7Aee6E5b2Aa729821864227e84;
function assemblyUpdateOwner(address newOwner) public {
assembly {
sstore(owner.slot, newOwner)
}
}
}
╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ Contract0 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 60623 ┆ 261 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ updateOwner ┆ 5302 ┆ 5302 ┆ 5302 ┆ 5302 ┆ 1 │
╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ Contract1 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 54823 ┆ 232 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ assemblyUpdateOwner┆ 5236 ┆ 5236 ┆ 5236 ┆ 5236 ┆ 1 │
╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
- TinyBonds.sol:119
- TinyBonds.sol:120
- TinyBonds.sol:254
- TinyBonds.sol:297
Mark data types as calldata
instead of memory
where possible. This makes it so that the data is not automatically loaded into memory. If the data passed into the function does not need to be changed (like updating values in an array), it can be passed in as calldata
. The one exception to this is if the argument must later be passed into another function that takes an argument that specifies memory
storage.
contract GasTest is DSTest {
Contract0 c0;
Contract1 c1;
Contract2 c2;
Contract3 c3;
function setUp() public {
c0 = new Contract0();
c1 = new Contract1();
c2 = new Contract2();
c3 = new Contract3();
}
function testGas() public {
uint256[] memory arr = new uint256[](10);
c0.calldataArray(arr);
c1.memoryArray(arr);
bytes memory data = abi.encode("someText");
c2.calldataBytes(data);
c3.memoryBytes(data);
}
}
contract Contract0 {
function calldataArray(uint256[] calldata arr) public {
uint256 j;
for (uint256 i; i < arr.length; i++) {
j = arr[i] + 10;
}
}
}
contract Contract1 {
function memoryArray(uint256[] memory arr) public {
uint256 j;
for (uint256 i; i < arr.length; i++) {
j = arr[i] + 10;
}
}
}
contract Contract2 {
function calldataBytes(bytes calldata data) public {
bytes32 val;
for (uint256 i; i < 10; i++) {
val = keccak256(abi.encode(data, i));
}
}
}
contract Contract3 {
function memoryBytes(bytes memory data) public {
bytes32 val;
for (uint256 i; i < 10; i++) {
val = keccak256(abi.encode(data, i));
}
}
}
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆ ┆ ┆ ┆ ┆ │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 97947 ┆ 521 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ calldataArray ┆ 2824 ┆ 2824 ┆ 2824 ┆ 2824 ┆ 1 │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆ ┆ ┆ ┆ ┆ │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 128171 ┆ 672 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ memoryArray ┆ 3755 ┆ 3755 ┆ 3755 ┆ 3755 ┆ 1 │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract2 contract ┆ ┆ ┆ ┆ ┆ │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 100547 ┆ 534 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ calldataBytes ┆ 4934 ┆ 4934 ┆ 4934 ┆ 4934 ┆ 1 │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract3 contract ┆ ┆ ┆ ┆ ┆ │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 135183 ┆ 707 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ memoryBytes ┆ 7551 ┆ 7551 ┆ 7551 ┆ 7551 ┆ 1 │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
- TinyBonds.sol:180
You can mark public or external functions as payable to save gas. Functions that are not payable have additional logic to check if there was a value sent with a call, however, making a function payable eliminates this check. This optimization should be carefully considered due to potentially unwanted behavior when a function does not need to accept ether.
contract GasTest is DSTest {
Contract0 c0;
Contract1 c1;
function setUp() public {
c0 = new Contract0();
c1 = new Contract1();
}
function testGas() public {
c0.isNotPayable();
c1.isPayable();
}
}
contract Contract0 {
function isNotPayable() public view {
uint256 val = 0;
val++;
}
}
contract Contract1 {
function isPayable() public payable {
uint256 val = 0;
val++;
}
}
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract0 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 32081 ┆ 190 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ isNotPayable ┆ 198 ┆ 198 ┆ 198 ┆ 198 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract1 contract ┆ ┆ ┆ ┆ ┆ │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 29681 ┆ 178 ┆ ┆ ┆ ┆ │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ isPayable ┆ 174 ┆ 174 ┆ 174 ┆ 174 ┆ 1 │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
- TinyBonds.sol:104
- TinyBonds.sol:108
- TinyBonds.sol:112
- TinyBonds.sol:116
- TinyBonds.sol:137
- TinyBonds.sol:170
- TinyBonds.sol:180
- TinyBonds.sol:205
- TinyBonds.sol:217
- TinyBonds.sol:224
- TinyBonds.sol:231
- TinyBonds.sol:238
- TinyBonds.sol:245
- TinyBonds.sol:252
- TinyBonds.sol:260
- TinyBonds.sol:306
- TinyBonds.sol:310
- TinyBonds.sol:314
- TinyBonds.sol:318
- TinyBonds.sol:323
- TinyBonds.sol:328
- TinyBonds.sol:332
- TinyBonds.sol:336
- TinyBonds.sol:346
- TinyBondsFactory.sol:38
- TinyBondsFactory.sol:49