Skip to content

Latest commit

 

History

History
1485 lines (1057 loc) · 49.2 KB

README.md

File metadata and controls

1485 lines (1057 loc) · 49.2 KB
Raw
New dark theme, support for Docker, Traefik, and OpenVPN servers. Includes a "bad actor" blocklist.

♾️ ConfigServer Firewall ♾️


ConfigServer Security & Firewall (CSF) is a popular and powerful firewall solution for Linux servers. This repo contains complete installation guides, a new dark theme, and also numerous patches for Docker and OpenVPN firewall support so that you can allow traffic between these services without interruption.


We also host a group ipsets / blocklists which are updated every few hours. These sets contain various lists of IP addresses which block connections known for SSH bruteforce attempts, port knocking / scanning, research, data collection, etc. These ipsets are compatible with ConfigServer Firewall, and also any other application which supports one IP per line (pi-hole, Windows hosts, etc).


Ipsets include lists from AbuseIPDB and IPThreat. For information on how to use these sets, read the section IP Rulesets & Blocklists.




Version Downloads Size Last Commit Contributors

Built with Material for MkDocs






Summary

This repository contains several folders:

  • 📁 configs
    • Ready-to-use CSF config files
      • configs/etc/csf/csf.conf (full version)
      • configs/etc/csf/csf.conf.clean (clean version)
      • configs/etc/GeoIP.conf GeoIP Config File for MaxMind geo-blocking
  • 📁 theme
    • Dark theme for ConfigServer Firewall
  • 📁 patches
    • Docker patch which allows CSF and Docker to work together
    • OpenVPN integration patch
  • 📁 blocklists
    • List of IP addresses which have been reported for ssh brute-force attempts, port scanning, etc.
    • 100% Confidence, powered by services such as AbuseIPDB
    • IPs are no older than 90 days old (updated daily), and also contain blocks to protect your privacy from certain online services
    • Add to csf.blocklists


Each release posted on the Releases Page contains several .zip files and a .tgz:

  • csf-firewall-vxx.xx.tgz
    • Latest official version of ConfigServer Firewall. You do not need this if you already have CSF installed on your system.
  • csf-firewall-vx.x.x-theme-dark.zip
    • Custom dark theme
  • csf-firewall-vx.x.x-patches.zip
    • The patches contained in this repository, which include the files:
      • 📄 csfpost.sh
      • 📄 csfpre.sh
      • 📄 docker.sh
      • 📄 install.sh
      • 📄 openvpn.sh
      • 📄 README.md
      • 📄 LICENSE


This guide will help you with the following:

  • Install CSF (ConfigServer Firewall)
  • Install CSF WebUI interface
  • Install patches
    • Docker Integration
    • OpenVPN Integration
  • Install Dark Theme
  • Traefik + CSF WebUI
    • Access CSF WebUI via domain
    • Secure domain with Authentik
    • IP Whitelist access to CSF WebUI


ConfigServer Firewall Features

  • Straight-forward SPI iptables firewall script
  • Daemon process that checks for login authentication failures for:
    • Courier imap, Dovecot, uw-imap, Kerio
    • OpenSSH
    • cPanel, WHM, Webmail (cPanel servers only)
    • Pure-ftpd, vsftpd, Proftpd
    • Password protected web pages (htpasswd)
    • Mod_security failures (v1 and v2)
    • Suhosin failures
    • Exim SMTP AUTH
    • Custom login failures with separate log file and regular expression matching
  • POP3/IMAP login tracking to enforce logins per hour
  • SSH login notification
  • SU login notification
  • Excessive connection blocking
  • UI Integration for cPanel, DirectAdmin, InterWorx, CentOS Web Panel (CWP), VestaCP, CyberPanel - and Webmin
  • Easy upgrade between versions from within the control panel
  • Easy upgrade between versions from shell
  • Pre-configured to work on a cPanel server with all the standard cPanel ports open
  • Pre-configured to work on a DirectAdmin server with all the standard DirectAdmin ports open
  • Auto-configures the SSH port if it’s non-standard on installation
  • Block traffic on unused server IP addresses – helps reduce the risk to your server
  • Alert when end-user scripts sending excessive emails per hour – for identifying spamming scripts
  • Suspicious process reporting – reports potential exploits running on the server
  • Excessive user processes reporting
  • Excessive user process usage reporting and optional termination
  • Suspicious file reporting – reports potential exploit files in /tmp and similar directories
  • Directory and file watching – reports if a watched directory or a file changes
  • Block traffic on a variety of Block Lists including DShield Block List and Spamhaus DROP List
  • BOGON packet protection
  • Pre-configured settings for Low, Medium or High firewall security (cPanel servers only)
  • Works with multiple ethernet devices
  • Server Security Check – Performs a basic security and settings check on the server (via cPanel/- DirectAdmin/Webmin UI)
  • Allow Dynamic DNS IP addresses – always allow your IP address even if it changes whenever you connect to the internet
  • Alert sent if server load average remains high for a specified length of time
  • mod_security log reporting (if installed)
  • Email relay tracking – tracks all email sent through the server and issues alerts for excessive usage (cPanel servers only)
  • IDS (Intrusion Detection System) – the last line of detection alerts you to changes to system and application binaries
  • SYN Flood protection
  • Ping of death protection
  • Port Scan tracking and blocking
  • Permanent and Temporary (with TTL) IP blocking
  • Exploit checks
  • Account modification tracking – sends alerts if an account entry is modified, e.g. if the password is changed or the login shell
  • Shared syslog aware
  • Messenger Service – Allows you to redirect connection requests from blocked IP addresses to preconfigured text and html pages to inform the visitor that they have been blocked in the firewall. This can be particularly useful for those with a large user base and help process support requests more efficiently
  • Country Code blocking – Allows you to deny or allow access by ISO Country Code
  • Port Flooding Detection – Per IP, per Port connection flooding detection and mitigation to help block DOS attacks
  • WHM root access notification (cPanel servers only)
  • lfd Clustering – allows IP address blocks to be automatically propagated around a group of servers running lfd. It allows allows cluster-wide allows, removals and configuration changes
  • Quick start csf – deferred startup by lfd for servers with large block and/or allow lists
  • Distributed Login Failure Attack detection
  • Temporary IP allows (with TTL)
  • IPv6 Support with ip6tables
  • Integrated UI – no need for a separate Control Panel or Apache to use the csf configuration
  • Integrated support for cse within the Integrated UI
  • cPanel Reseller access to per reseller configurable options Unblock, Deny, Allow and Search IP address blocks
  • System Statistics – Basic graphs showing the performance of the server, e.g. Load Averages, CPU Usage, Memory Usage, etc
  • ipset support for large IP lists
  • Integrated with the CloudFlare Firewall
  • …lots more!


How The Patcher Works

You can read this if you want, or skip it. It outlines exactly how the patches work:

  • Download all the files in the /patch folder to your system.
  • Set the install.sh file to be executable.
    • sudo chmod +x install.sh
  • Run the install.sh script
    • sudo ./install.sh
    • The script will first check to see if you have ConfigServer Firewall and all of its prerequisites installed. It will install them if they are not installed. This includes:
      • ConfigServer Firewall
      • ipset package
      • iptables / ip6tables package
    • Two new files will be added:
      • /usr/local/csf/bin/csfpre.sh
      • /usr/local/csf/bin/csfpost.sh
    • The patches will then be moved onto your system in the locations:
      • /usr/local/include/csf/post.d/docker.sh
      • /usr/local/include/csf/post.d/openvpn.sh
    • The Docker patch will first check to ensure you have the following:
      • Must have Docker installed
        • This script will NOT install docker. You must do that.
      • Must have a valid docker network adapter named docker* or br-*
    • The OpenVPN patch will first check to ensure you have the following:
      • Must have OpenVPN Server installed
      • Must have a valid network tunnel named tun* (tun0, tun1, etc)
      • Must have an outside network adapter named either eth* or enp*
      • If any of the checks above are not true, OpenVPN patcher will skip
        • You can check your list of network adapters using any of the commands below:
          • ip link show
          • ifconfig
        • You can check if OpenVPN server is installed by using the commmand:
          • openvpn --version

  • If you attempt to run the install.sh any time after the initial setup:
    • The script will check if ConfigServer Firewall and all prerequisites are installed.
      • If they are not installed; they will be installed.
      • If they are already installed; nothing will happen. The script does NOT update your packages. It installs the latest version of each package from the time that you run the script and do not already have ConfigServer Firewall installed.
    • The script will look at all of the files it added the first time and check the MD5 hash.
      • If the csfpre, csfpost, or patch files do not exist; they will be re-added to your system.
      • If the patch files are different from the one the patcher comes with, you will be prompted / asked if you wish to overwrite your already installed copy
      • If the patch files are the same as the ones which comes with the patcher; nothing will be done and it will skip that step.

When you start up the CSF service, the csfpost.sh file will loop through every patch / file added to the post.d folder, and run the code inside of those files. The code inside each patch contains iptable / firewall rules which allow that app to communicate between your system and the outside world.


Even if you were to completely wipe your iptable rules, as soon as you restart the CSF service; those rules will be added right back.



Install ConfigServer Firewall

You can install ConfigServer Firewall and all prerequisites one of two ways:

  1. Install Using Patcher
  2. Install Manually

Install Using Patcher

If you would like to install ConfigServer Firewall using this repo's patcher; download the patch:

git clone https://github.com/Aetherinox/csf-firewall.git

Set the permissions for the install.sh file:

sudo chmod +x /csf-firewall/patch/install.sh

Run the script:

sudo ./csf-firewall/patch/install.sh

If ConfigServer Firewall is not already installed on your system; you should see:

  Installing package iptables
  Installing package ipset
  Installing package ConfigServer Firewall

  Docker patch will now start ...

Install Manually

These steps explain how to install ConfigServer Firewall manually.


Step 1: Prerequisites

  • A Linux server running CentOS, Debian, Ubuntu, or any other compatible Linux distribution.
  • Root access or a user account with sudo privileges.
  • Perl installed on your server. If Perl is not installed, you can install it by running the following commands:

    • For CentOS/RHEL:

      sudo yum install perl ipset

    • For Debian/Ubuntu:

      sudo apt-get update 
sudo apt-get install perl ipset

Step 2: Download and Install CSF

To download and install CSF, follow these steps:


  • Log in to your server via SSH.
  • Download the latest version of CSF using the wget command: 
    wget https://download.configserver.com/csf.tgz
  • Extract the downloaded archive: 
    tar -xzf csf.tgz
  • Navigate to the extracted directory: 
    cd csf
  • Run the installation script: 
    sudo sh install.sh

CSF will now be installed on your server, along with its Web UI (ConfigServer Firewall & Security) if you have a control panel like cPanel or DirectAdmin installed.



Testing the Firewall

Before enabling and configuring CSF, it is crucial to test whether it is compatible with your server. Run the following command to initiate the test:

sudo perl /usr/local/csf/bin/csftest.pl

The test will check for any potential issues or conflicts. If the test completes successfully, you will see the message “RESULT: csf should function on this server.” If there are any problems, the test will provide information on how to resolve them.



Configuring CSF

Now that CSF is installed, you can start configuring it to suit your server’s requirements. The main configuration file for CSF is located at /etc/csf/csf.conf. You can use your preferred text editor to modify the file, such as nano or vim:

sudo nano /etc/csf/csf.conf

Some essential settings you may want to modify include:

[!NOTLast Sync: $now When you run the patcher install.sh; TESTING MODE will automatically be disabled after everything as successfully completed.


  • TESTING: Set this value to 0 to disable testing mode and activate the firewall.
  • TCP_IN and TCP_OUT: These settings define the allowed incoming and outgoing TCP ports, respectively. Add or remove ports as required, separated by commas.
  • UDP_IN and UDP_OUT: These settings define the allowed incoming and outgoing UDP ports, respectively. Add or remove ports as required, separated by commas.
  • DENY_IP_LIMIT: This setting defines the maximum number of IP addresses that can be listed in the /etc/csf/csf.deny file. Adjust this limit as needed.
  • CT_LIMIT: This setting controls the number of connections from a single IP address that are allowed before the IP is temporarily blocked. Adjust this value according to your server’s requirements.

These are just a few of the numerous configuration options available in CSF. Make sure to review the configuration file and adjust the settings to suit your server’s needs. After making changes to the configuration file, save and exit the text editor.



Enabling CSF Firewall

Once you have configured the CSF firewall, it is time to enable it. To do so, run the following command:

sudo csf -e

This command will restart the CSF and LFD (Login Failure Daemon) services, applying your configuration changes and activating the firewall.



Managing the Firewall

CSF provides several commands to manage the firewall, such as:


Start Firewall

sudo csf -s

Stop Firewall

sudo csf -f

Restart Firewall

sudo csf -r

List Firewall Rules

sudo csf -l

Add IP to Allow List

sudo csf -a IP_ADDRESS

Remove IP to Allow List

sudo csf -ar IP_ADDRESS

Add IP to Deny List

sudo csf -d IP_ADDRESS

Remove IP from Deny List

sudo csf -dr IP_ADDRESS

Add Temp Block IP

sudo csf -td IP_ADDRESS

Remove Temp Block IP

sudo csf -tr IP_ADDRESS

These commands can help you manage your server’s security and monitor incoming and outgoing traffic.



Uninstalling CSF

If you decide to uninstall CSF for any reason, follow these steps:


  1. Navigate to the CSF directory: 
    cd /etc/csf
  2. Run the uninstallation script: 
    sudo sh uninstall.sh

The script will remove CSF and its associated files from your server.



Enable CSF Firewall Web UI

ConfigServer Firewall offers a WebUI for the managing firewall from the web interface. This section explains how to install the WebUI.


Step 1: Install Required Perl Modules:

CSF UI required some of Perl modules to be installed on your system. Use the following commands to install required modules as per your operating system.


Debian based systems:

sudo apt-get install libio-socket-ssl-perl libcrypt-ssleay-perl \
                    libnet-libidn-perl libio-socket-inet6-perl libsocket6-perl

Redhat based systems:

sudo yum install perl-IO-Socket-SSL.noarch perl-Net-SSLeay perl-Net-LibIDN \
               perl-IO-Socket-INET6 perl-Socket6

Step 2: Enable CSF Firewall Web UI:

To enable CSF web UI edit /etc/csf/csf.conf file in your favorite text editor and update the following values.

sudo vim /etc/csf/csf.conf
# 1 to enable, 0 to disable web ui 
UI = "1"

# Set port for web UI. The default port is 6666, but
# I change this to 1025 to easy access. Default port create some issue
# with popular chrome and firefox browser (in my case) 

UI_PORT = "1025"

# Leave blank to bind to all IP addresses on the server 
UI_IP = ""

# Set username for authetnication 
UI_USER = "admin"

# Set a strong password for authetnication 
UI_PASS = "admin"

Change the following values to your own:

  • UI_PORT
  • UI_USER
  • UI_PASS

After making changes, edit /etc/csf/ui/ui.allow configuration file and add your public IP to allow access to CSF UI. Change YOUR_PUBLIC_IP_ADDRESS with your public IP address.

sudo echo "YOUR_PUBLIC_IP_ADDRESS" >>  /etc/csf/ui/ui.allow

Web UI works under lfd daemon. So restart the lfd daemon on your system using the following command.

sudo service lfd restart

In order to gain access to the online admin panel; you must ensure lfd and csf are running. You can check by running the commands:

sudo service lfd status

You should see the lfd service running:

● lfd.service - ConfigServer Firewall & Security - lfd
     Loaded: loaded (/lib/systemd/system/lfd.service; enabled; preset: enabled)
     Active: active (running) since Mon 2024-08-05 11:59:38 MST; 1s ago
    Process: 46393 ExecStart=/usr/sbin/lfd (code=exited, status=0/SUCCESS)
   Main PID: 46407 (lfd - sleeping)
      Tasks: 8 (limit: 4613)
     Memory: 121.7M
        CPU: 2.180s
     CGroup: /system.slice/lfd.service

Next, confirm csf service is also running:

sudo service csf status

Check the output for errors on service csf. You should see no errors:

● csf.service - ConfigServer Firewall & Security - csf
     Loaded: loaded (/lib/systemd/system/csf.service; enabled; preset: enabled)
     Active: active (exited) since Mon 2024-08-05 12:04:09 MST; 1s ago
    Process: 46916 ExecStart=/usr/sbin/csf --initup (code=exited, status=0/SUCCESS)
   Main PID: 46916 (code=exited, status=0/SUCCESS)
        CPU: 12.692s

If you see the following error when running csf status:

csf[46313]: open3: exec of /sbin/ipset flush failed: No such file or directory at /usr/sbin/csf line 5650.

You must install ipset:

sudo apt-get update 
sudo apt-get install ipset

Step 3: Access and Use Web UI:

Now, access CSF UI on your browser with the specified port. For this tutorial; we used 1025 port and accessed the CSF admin panel by opening our browser and going to:

https://127.0.0.1:1025

When prompted for the username and password; the default is:

Field Value
Username admin
Password admin


After successful login, you will find the screen like below.


Allow IP Address: You can use below option to allow any IP quickly. This action adds the entry to the /etc/csf/csf.allow file.

Deny IP Address: You can use below option to deny any IP quickly. This action adds the entry to the /etc/csf/csf.deny file.

Unblock IP Address: You can use below option to quickly unblocked any IP which is already blocked by CSF.



Install Docker Patch

After you have installed CSF, the WebUI, and enabled both lfd and csf services; it's now time to run the docker patcher. The docker patch will check your docker configuration, and add a series of iptable rules so that docker can communicate with the outside world and users can access your containers.


The docker patch does several things:

  • Allows for you to restart CSF without having to restart your docker containers.
  • Scans every container you have set up in docker and adds a whitelist firewall rule

Clone

Within your server, change to whatever directory where you want to download everything (including patch):

cd $HOME/Documents

Clone the repo

git clone https://github.com/Aetherinox/csf-firewall.git

Configure

The /patch/docker.sh file has a few configs you can adjust. Open it in a text editor and change the values to your preference.

DOCKER_INT="docker0"
CSF_FILE_ALLOW="/etc/csf/csf.allow"
CSF_COMMENT="Docker container whitelist"
DEBUG_ENABLED="false"
IP_CONTAINERS=(
    '172.17.0.0/16'
)

Each setting is defined below:

Setting Description
DOCKER_INT
main docker network interface

CSF_FILE_ALLOW
Path to your csf.allow file

CSF_COMMENT
comment added to each new whitelisted docker ip

DEBUG_ENABLED
debugging / better logs

IP_CONTAINERS
list of ip address blocks you will be using for your docker setup. these blocks will be whitelisted through ConfigServer Firewall


Run Patch

Set the permissions (if needed)

sudo chmod +x /patch/install.sh

Run the script:

cd /patch/
sudo ./install.sh

On certain distros of Linux, you may need to use the following instead to run the patcher:

sudo sh install.sh

The docker.sh file will be installed to /usr/local/include/csf/post.d


Manual Run

You can manually run the docker.sh script. It will also allow you to specify arguments such as --dev to get more detailed logging as the firewall is set up. This should only be done if you know what you're doing.

sudo chmod +x /patch/docker.sh
sudo /patch/docker.sh

You can call arguments by running the file using:

sudo /patch/docker.sh --dev

You can also find out what version you are running by appending --version to either the install.sh or docker.sh file:

./patch/install.sh --version

ConfigServer Firewall Configuration - v14.22.0
https://github.com/Aetherinox/csf-firewall
Ubuntu | 24.04

sudo /patch/docker.sh --version

ConfigServer Firewall Docker Patch - v14.22.0
https://github.com/Aetherinox/csf-firewall
Ubuntu | 24.04

Advanced Logs

This script includes debugging prints / logs. To view these, restart csf.service by running the following command in terminal:

sudo csf -r

All steps performed by the script will be displayed in terminal:

  + POSTROUTING   Adding IPs from primary IP list
                  + 172.17.0.0/16
                  + RULE:                  -t nat -A POSTROUTING ! -o docker0 -s 172.17.0.0/16 -j MASQUERADE
                  + RULE:                  -t nat -A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE

 ---------------------------------------------------------------------------------------------------

  + BRIDGES       Configuring network bridges

                  BRIDGE                   e8a57188323a                          
                  DOCKER INTERFACE         docker0                               
                  SUBNET                   172.17.0.0/16                         
                  + RULE:                  -t nat -A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
                  + RULE:                  -t nat -A DOCKER -i docker0 -j RETURN
                  + RULE:                  -A DOCKER-ISOLATION-STAGE-1 -i docker0 ! -o docker0 -j DOCKER-ISOLATION-STAGE-2
                  + RULE:                  -A DOCKER-ISOLATION-STAGE-2 -o docker0 -j DROP


Install OpenVPN Patch

This repo includes an OpenVPN patch which automatically sets up ConfigServer Firewall to accept connections from your OpenVPN server; while still restricting other incoming and outgoing connections you may not want going through.


Clone

Within your server, change to whatever directory where you want to download everything (including patch):

cd $HOME/Documents

Clone the repo

git clone https://github.com/Aetherinox/csf-firewall.git

Configure

The /patch/openvpn.sh file has a few configs you can adjust. Open it in a text editor and change the values to your preference.

ETH_ADAPTER=$(ip route | grep default | sed -e "s/^.*dev.//" -e "s/.proto.*//")
TUN_ADAPTER=$(ip -br l | awk '$1 ~ "^tun[0-9]" { print $1}')
IP_PUBLIC=$(curl ipinfo.io/ip)
DEBUG_ENABLED="false"
IP_POOL=(
    '10.8.0.0/24'
)

Each setting is defined below:

Setting Description
ETH_ADAPTER
primary network adapter on host machine

TUN_ADAPTER
openvpn tunnel adapter, usually tun0

IP_PUBLIC
server's public ip address

DEBUG_ENABLED
debugging / better logs

IP_POOL
openvpn ip pool


The script tries to automatically detect the values specified above, however, you can manually specify your own values.


As an example, instead of automatically detecting your server's public IP address or ethernet adapters, you can specify your own by changing the following:

# old code
ETH_ADAPTER=$(ip route | grep default | sed -e "s/^.*dev.//" -e "s/.proto.*//")
TUN_ADAPTER=$(ip -br l | awk '$1 ~ "^tun[0-9]" { print $1}')
IP_PUBLIC=$(curl ipinfo.io/ip)

# manually specified ip
ETH_ADAPTER="eth0"
TUN_ADAPTER="tun0"
IP_PUBLIC="216.55.100.5"

Run Patch

Set the permissions:

sudo chmod +x /patch/install.sh

Run the script:

cd /patch/
sudo ./install.sh

On certain distros of Linux, you may need to use the following instead to run the patcher:

sudo sh install.sh

The openvpn.sh file will be installed to /usr/local/include/csf/post.d


Manual Run

You can manually run the openvpn.sh script. It will also allow you to specify arguments such as --dev to get more detailed logging as the firewall is set up. This should only be done if you know what you're doing.

sudo chmod +x /patch/openvpn.sh
sudo /patch/openvpn.sh

You can call arguments by running the file using:

sudo /patch/openvpn.sh --dev

You can also find out what version you are running by appending --version to either the install.sh or openvpn.sh file:

./patch/install.sh --version

ConfigServer Firewall Configuration - v2.0.0.0
https://github.com/Aetherinox/csf-firewall
Ubuntu | 24.04

sudo /patch/openvpn.sh --version

ConfigServer Firewall OpenVPN Patch - v2.0.0.0
https://github.com/Aetherinox/csf-firewall
Ubuntu | 24.04

Advanced Logs

This script includes debugging prints / logs. To view these, restart csf.service by running the following command in terminal:

sudo csf -ra

All steps performed by the script will be displayed in terminal:

  + OPENVPN       Adding OpenVPN Rules

                  + RULE                   -A INPUT -i tun+ -j ACCEPT            
                  + RULE                   -A FORWARD -i tun+ -j ACCEPT          
                  + RULE                   -A FORWARD -o tun0 -j ACCEPT
                  + RULE                   -t nat -A POSTROUTING -o enp0s3 -j MASQUERADE
                  + RULE                   -A FORWARD -i tun+ -o enp0s3 -m state --state RELATED,ESTABLISHED -j ACCEPT
                  + RULE                   -A FORWARD -i enp0s3 -o tun+ -m state --state RELATED,ESTABLISHED -j ACCEPT
                  + RULE                   -t nat -A POSTROUTING -j SNAT --to-source XX.XXX.XXX.XXX
                  + RULE                   -t nat -A POSTROUTING -s 10.8.0.0/24 -o enp0s3 -j MASQUERADE


Install Dark Theme

The dark theme is an unofficial theme not available in the official install of ConfigServer firewall. You may use the files provided in this repository to switch your copy of CSF over to the dark theme.



Head over to the Releases page and download the dark theme zip file:

  • *-theme-dark.zip

Extract the files from the zip to the same paths as they are shown in the zip. You should have the following files:

  • /etc/csf/ui/images/*.css
  • /usr/local/csf/lib/ConfigServer/*.pm
  • /usr/sbin/lfd


Traefik Integration with CSF WebUI

To integrate the CSF WebUI into Docker and Traefik so that you can access it via a domain and secure it:


Open /etc/csf/csf.conf and change the UI_IP. This specifies the IP address that the CSF WebUI will bind to. By default, the value is empty and binds CSF's WebUI to all IPs on your server.

Find

UI_IP = ""

Change the IP to your Docker network subnet. You MUST use the format below, which is ::IPv6:IPv4

UI_IP = "::ffff:172.17.0.1"

The above change will ensure that your CSF WebUI is not accessible via your public IP address. We're going to allow access to it via your domain name, but add some Traefik middleware so that you must authenticate before you can access the WebUI.


Next, we can add CSF through Docker and Traefik so that it's accessible via csf.domain.com. Open up your Traefik's dynamic.yml and add the following:

http:
  routers:
    csf-http:
      service: "csf"
      rule: "Host(`csf.domain.com`)"
      entryPoints:
        - "http"
      middlewares:
        - https-redirect@file

    csf-https:
      service: "csf"
      rule: "Host(`csf.domain.com`)"
      entryPoints:
        - "https"
      middlewares:
        - authentik@file
        - whitelist@file
        - geoblock@file
      tls:
        certResolver: cloudflare
        domains:
          - main: "domain.com"
            sans:
              - "*.domain.com"

A full example of the Traefik routers and middleware can be found at:


At the bottom of the same file, we must now add a new loadBalancer rule under http -> services. Change the ip and port if you have different values:

http:
  routers:
    [CODE FROM ABOVLast Sync: $now
  services:
    csf:
      loadBalancer:
        servers:
          - url: "https://172.17.0.1:8546/"

With the example above, we are also going to add a few middlewares:


By applying the above middlewares, we can restrict what IP addresses can access your CSF WebUI, as well as add Authentik's authentication system so that you must authenticate first before getting into the CSF WebUI. These are all optional, and you can apply whatever middlewares you deem fit.


You must configure the above middleware if you have not added it to Traefik yet. This guide does not go into how to add middleware to Traefik, that information can be found at:


Once you configure these changes in Traefik, you can restart your Traefik docker container. The command for that depends on how you set up the container. If you used docker-compose.yml, you can cd into the folder with the docker-compose.yml file and then execute:

docker compose down && docker compose up -d

Adding Authentik Provider

If you are adding Authentik as middleware in the steps above; the last thing you must do is log in to your Authentik admin panel and add a new Provider so that we can access the CSF WebUI via your domain.


Once you sign into the Authentik admin panel, go to the left-side navigation, select Applications -> Providers. Then at the top of the new page, click Create.



For the provider, select Proxy Provider.



Add the following provider values:

  • Name: CSF ForwardAuth
  • Authentication Flow: default-source-authentication (Welcome to authentik!)
  • Authorization Flow: default-provider-authorization-implicit-consent (Authorize Application)

Select Forward Auth (single application):

  • External Host: https://csf.domain.com


Once finished, click Create. Then on the left-side menu, select Applications -> Applications. Then at the top of the new page, click Create.



Add the following parameters:

  • Name: CSF (ConfigServer Firewall)
  • Slug: csf
  • Group: Administrative
  • Provider: CSF ForwardAuth
  • Backchannel Providers: None
  • Policy Engine Mode: any


Save, and then on the left-side menu, select Applications -> Outposts:



Find your Outpost and edit it.


Move CSF (ConfigServer Firewall) to the right side Selected Applications box.



You should be able to access csf.domain.com and be prompted now to authenticate with Authentik.



IP Sets / Blocklist

This repository contains a set of ipsets which are automatically updated every 6 hours. You may add these sets to your ConfigServer Firewall /etc/csf/csf.blocklists with the following new line:

csf|86400|0|https://raw.githubusercontent.com/Aetherinox/csf-firewall/main/blocklists/01_master.ipset

Set Description Importance View
01_master.ipset Abusive IP addresses which have been reported for port scanning and SSH bruteforcing. HIGHLY recommended.
Includes AbuseIPDB, IPThreat, CinsScore, GreensNow		 ⭐⭐⭐⭐⭐ view
01_highrisk.ipset IPs with highest risk to your network and have a possibility that the activity which comes from them are going to be fraudulent. ⭐⭐⭐⭐ view
02_privacy_general.ipset Servers which scan ports for data collection and research purposes. List includes Censys, Shodan, Project25499, InternetArchive ⭐⭐⭐⭐ view
02_privacy_amazon_aws.ipset Amazon AWS ⭐⭐ view
02_privacy_amazon_ec2.ipset Amazon EC2 ⭐⭐ view
02_privacy_bing.ipset Bing Crawlers ⭐⭐ view
02_privacy_cloudfront.ipset Cloudfront CDN ⭐ view
02_privacy_fastly.ipset Fastly CDN ⭐ view
02_privacy_google.ipset Google Crawlers ⭐⭐ view
03_spam_forums.ipset List of known forum / blog spammers and bots ⭐⭐ view
03_spam_spamhaus.ipset Bad actor IP addresses registered with Spamhaus ⭐⭐⭐⭐ view


Download ConfigServer Firewall

The latest version of csf can be downloaded from:



References for More Help

If you need additional help apart from this guide to configure CSF; use the following pages for more help:



Contributors ✨

We are always looking for contributors. If you feel that you can provide something useful to Gistr, then we'd love to review your suggestion. Before submitting your contribution, please review the following resources:


Want to help but can't write code?


Alt


The following people have helped get this project going: