BoardConfig.mk

#
# Copyright (C) 2015 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

DEVICE_PATH := device/zte/nx512j

TARGET_SPECIFIC_HEADER_PATH := $(DEVICE_PATH)/include

PRODUCT_COPY_FILES := $(filter-out frameworks/base/data/keyboards/Generic.kl:system/usr/keylayout/Generic.kl , $(PRODUCT_COPY_FILES))

# Assert
TARGET_OTA_ASSERT_DEVICE := nx512J,NX512J,Nx512J,NX512j

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := cortex-a53

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53
ENABLE_CPUSETS := true
TARGET_CPU_SMP := true
ARCH_ARM_HAVE_TLS_REGISTER := true
TARGET_USE_QCOM_BIONIC_OPTIMIZATION := true

TARGET_BOARD_SUFFIX := _64
TARGET_USES_64_BIT_BINDER := true
TARGET_BOARD_PLATFORM := msm8916
TARGET_BOARD_PLATFORM_GPU := qcom-adreno405
BOARD_USES_ADRENO := true




#CMHW
BOARD_HARDWARE_CLASS += device/zte/nx512j/cmhw
TARGET_TAP_TO_WAKE_NODE := "/data/tp/easy_wakeup_gesture"

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := MSM8916
TARGET_NO_BOOTLOADER := true

# Kernel
#BOARD_CUSTOM_BOOTIMG_MK := $(DEVICE_PATH)/mkbootimg.mk
BOARD_KERNEL_BASE := 0x80000000
BOARD_KERNEL_CMDLINE := console=null androidboot.console=ttyHSL0 boot_cpus=0,3,4,7 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 sched_enable_hmp=1 androidboot.selinux=permissive
BOARD_KERNEL_PAGESIZE := 2048
BOARD_KERNEL_SEPARATED_DT := true
BOARD_KERNEL_TAGS_OFFSET := 0x00000100
BOARD_RAMDISK_OFFSET     := 0x02000000
TARGET_KERNEL_SOURCE := kernel/zte/nx512j
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_USES_UNCOMPRESSED_KERNEL := true
TARGET_KERNEL_CONFIG := nx512j_defconfig

# Properties
TARGET_SYSTEM_PROP += device/zte/nx512j/system.prop

# Audio
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_LOW_LATENCY_PRIMARY := true
AUDIO_FEATURE_ENABLED_VOICE_CONCURRENCY := true
AUDIO_FEATURE_ENABLED_WFD_CONCURRENCY := true
BOARD_USES_ALSA_AUDIO := true
# USE_CUSTOM_AUDIO_POLICY := 1
USE_XML_AUDIO_POLICY_CONF := 1
#
AUDIO_FEATURE_DEEP_BUFFER_RINGTONE := true

# Bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
BLUETOOTH_HCI_USE_MCT := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(DEVICE_PATH)/bluetooth

# Camera
USE_DEVICE_SPECIFIC_CAMERA := true
# Force camera module to be compiled only in 32-bit mode on 64-bit systems
# Once camera module can run in the native mode of the system (either
# 32-bit or 64-bit), the following line should be deleted
BOARD_QTI_CAMERA_32BIT_ONLY := true
BOARD_GLOBAL_CFLAGS += -DCAMERA_VENDOR_L_COMPAT
TARGET_HAS_LEGACY_CAMERA_HAL1 := true


# Chromium
#PRODUCT_PREBUILT_WEBVIEWCHROMIUM := yes
#USE_PREBUILT_CHROMIUM := 1
#-include prebuilts/chromium/nx512j/chromium_prebuilt.mk

# Crypto
TARGET_HW_DISK_ENCRYPTION := true
TARGET_NO_SD_ADOPT_ENCRYPTION := true

#Remove # if cryptfs path not detected
#TARGET_CRYPTFS_HW_PATH := device/qcom/common/cryptfs_hw

# Graphics
OVERRIDE_RS_DRIVER := libRSDriver_adreno.so
MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024
TARGET_USES_ION := true
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
TARGET_USES_C2D_COMPOSITION := true
USE_OPENGL_RENDERER := true
TARGET_CONTINUOUS_SPLASH_ENABLED := true
#
#VSYNC_EVENT_PHASE_OFFSET_NS := 7500000
#SF_VSYNC_EVENT_PHASE_OFFSET_NS := 5000000

# Media
TARGET_ENABLE_QC_AV_ENHANCEMENTS := true
TARGET_QCOM_MEDIA_VARIANT := caf

# FM
# TARGET_QCOM_NO_FM_FIRMWARE := true
AUDIO_FEATURE_ENABLED_FM := true
TARGET_FM_LEGACY_PATCHLOADER := true
 
# Fonts
EXTENDED_FONT_FOOTPRINT := true

# GPS
TARGET_GPS_HAL_PATH := $(DEVICE_PATH)/gps
TARGET_NO_RPC := true

# Init
#TARGET_INIT_VENDOR_LIB := libinit_msm
TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
#TARGET_INIT_VENDOR_LIB := libinit_msm8916
#TARGET_RECOVERY_DEVICE_MODULES := libinit_msm8916

#ANDROID_COMPILE_WITH_JACK := false

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# Partitions
BOARD_FLASH_BLOCK_SIZE := 131072
BOARD_BOOTIMAGE_PARTITION_SIZE := 33554432
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_PERSISTIMAGE_PARTITION_SIZE := 8388608
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 33554432
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
BOARD_USERDATAIMAGE_PARTITION_SIZE := 13258652672 # 13258669056 - 16384

# Power
TARGET_POWERHAL_VARIANT := qcom

# Qualcomm support
BOARD_USES_QC_TIME_SERVICES := true
ifneq ($(QCPATH),)
BOARD_USES_QCNE := true
endif
BOARD_USES_QCOM_HARDWARE := true
TARGET_USES_QCOM_BSP := true
BOARD_GLOBAL_CFLAGS += -DQCOM_BSP		
BOARD_GLOBAL_CFLAGS += -DQCOM_HARDWARE
# ANT+
BOARD_ANT_WIRELESS_DEVICE := "vfs-prerelease"

# Radio
ADD_RADIO_FILES := false
TARGET_RELEASETOOLS_EXTENSIONS := $(DEVICE_PATH)

# Recovery
TARGET_RECOVERY_FSTAB := $(DEVICE_PATH)/rootdir/fstab.qcom
DEVICE_RESOLUTION := 1080x1920
TARGET_RECOVERY_PIXEL_FORMAT := ABGR_8888
BOARD_USE_CUSTOM_RECOVERY_FONT := \"roboto_15x24.h\"
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# RIL
PROTOBUF_SUPPORTED := true
TARGET_RIL_VARIANT := caf

# SELinux
include device/qcom/sepolicy/sepolicy.mk

BOARD_SEPOLICY_DIRS += \
    device/zte/nx512j/sepolicy

# TWRP Recovery
RECOVERY_GRAPHICS_USE_LINELENGTH := true
RECOVERY_SDCARD_ON_DATA := true
TW_TARGET_USES_QCOM_BSP := true
TW_INCLUDE_L_CRYPTO := true
TW_NEW_ION_HEAP := true
TW_FLASH_FROM_STORAGE := true
TW_INTERNAL_STORAGE_PATH := "/data/media/0"
TW_INTERNAL_STORAGE_MOUNT_POINT := "data"
TW_EXTERNAL_STORAGE_PATH := "/external_sd"
TW_EXTERNAL_STORAGE_MOUNT_POINT := "external_sd"
TW_DEFAULT_EXTERNAL_STORAGE := true
TW_BRIGHTNESS_PATH := /sys/class/leds/lcd-backlight/brightness
#TW_USE_TOOLBOX := true
TARGET_RECOVERY_QCOM_RTC_FIX := true
TW_DEFAULT_BRIGHTNESS := 80
BOARD_SUPPRESS_SECURE_ERASE := true
TW_INCLUDE_NTFS_3G := true

 #to build twrp , just remove '#'
 #RECOVERY_VARIANT := twrp

TARGET_REQUIRES_SYNCHRONOUS_SETSURFACE := true

# Video
TARGET_HAVE_SIGNED_VENUS_FW := true

# Vold
TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun%d/file

# Wifi
TARGET_PROVIDES_WCNSS_QMI := true
TARGET_USES_QCOM_WCNSS_QMI := true
# The uncompressed arm64 is too large, split wifi for now
WIFI_DRIVER_MODULE_PATH := "/system/lib/modules/wlan.ko"
WIFI_DRIVER_MODULE_NAME := "wlan"
BOARD_HAS_QCOM_WLAN := true
BOARD_HAS_QCOM_WLAN_SDK := true
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_qcwcn
BOARD_WLAN_DEVICE := qcwcn
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_qcwcn
WIFI_DRIVER_FW_PATH_AP := "ap"
WIFI_DRIVER_FW_PATH_STA := "sta"
WPA_SUPPLICANT_VERSION := VER_0_8_X

DEVICE_RESOLUTION := 1080x1920
MR_PIXEL_FORMAT := "ABGR_8888"
MR_INPUT_TYPE := type_b
MR_INIT_DEVICES := $(DEVICE_PATH)/multirom/mr_init_devices.c
MR_USE_MROM_FSTAB := true
MR_DPI := xxhdpi
MR_DPI_FONT := 216
MR_DEVICE_VARIANTS := NX512J
MR_FSTAB := $(DEVICE_PATH)/twrp.fstab
MR_KEXEC_MEM_MIN := 0x0
MR_DEVICE_HOOKS := $(DEVICE_PATH)/multirom/mr_hooks.c
MR_DEVICE_HOOKS_VER := 5
TARGET_RECOVERY_IS_MULTIROM := true

# inherit from the proprietary version
-include vendor/zte/nx512j/BoardConfigVendor.mk