Add an incrementing kWh sensor for each CT on the Harvi

[dbw1966]

When using the additional CT's on the Harvi, it would be great to have an incrementing kWh like
"myenergi Hub_xxxxxxx Grid import today". I want to use this to measure energy delivered on basic car charger for solar battery prediction programme Predbat in Home Asisstant.

[G6EJD]

HA can do this easily, no need.

https://www.home-assistant.io/integrations/integration/#:~:text=An%20integration%20sensor%20is%20quite,power%20in%20W%20(Watts).&text=This%20configuration%20will%20provide%20you,as%20a%20device_class%20of%20energy%20.

[LeiChat]

The text highlighting went a little wonky on that link, it made the relevant paragraph invisible. 🤷‍♂️🤣

https://www.home-assistant.io/integrations/integration/#energy

[silverailscolo]

Note that you will need to reset the harvi CT clamp sensors to 0 after the last measurement, when no other current is sensed as that is what powers the harvi. The myenergi server takes care of inputs configured in their app, but my 2 extra sensors - which monitor a cooker - would keep adding to the daily consumption unless reset. I added a harvi-last-seen timestamp sensor and a 2 minute timer in HA to correct this.

[G6EJD]

So is this ‘issue’ now closed? If so respectfully close it.