This app supports Layer 3 networking protocols, namely IP.
As this application implements basic layer 3 routing first class protocol support is required. Any protocols not in this list are not supported.
Supported
IPv4 is supported with full unicast support.
Faux routing is supported where nodes can be classified as local and mesh, with local nodes supporting lower timeouts and faster re-registration intervals.
All IPv4 IPs are routed by the kernel as a flat network, local vs mesh subnetting is done entirely in the Tun Mesh application.
| IPv4 Packet Type | Supported | Note |
|---|---|---|
| Unicast | Yes | |
| Broadcast - 255.255.255.255 | Yes | Will broadcast to the local subnet. Disabled by default. |
| Broadcast - Local subnet broadcast address | No | Not technically possible with current tun setup. Use 255.255.255.255. |
| Broadcast - Mesh subnet broadcast address | Yes | Will broadcast to all nodes in the mesh. Disabled by default. |
| Multicast | No | Not supported. |
Note: Broadcast IPs usage likely requires broadcast support to be enabled on the host.
Unsupported