This role facilitates the configuration of border gateway protocol (BGP) attributes. It supports the configuration of router ID, networks, neighbors, and maximum paths. This role is abstracted for Dell EMC PowerSwitch platforms running SmartFabric OS10.
The BGP role requires an SSH connection for connectivity to a Dell EMC SmartFabric OS10 device. You can use any of the built-in OS connection variables.
- Role is abstracted using the
ansible_network_osvariable that can takedellemc.os10.os10as the value - If
os10_cfg_generateis set to true, it generates the role configuration commands in a file - Any role variable with a corresponding state variable setting to absent negates the configuration of that variable
- Setting an empty value for any variable negates the corresponding configuration
- Variables and values are case-sensitive
os10_bgp keys
| Key | Type | Description | Support |
|---|---|---|---|
asn |
string (required) | Configures the autonomous system (AS) number of the local BGP instance | os10 |
router_id |
string | Configures the IP address of the local BGP router instance | os10 |
graceful_restart |
boolean | Configures graceful restart capability | os10 |
maxpath_ibgp |
integer | Configures the maximum number of paths to forward packets through iBGP (1 to 64; default 1) | os10 |
maxpath_ebgp |
integer | Configures the maximum number of paths to forward packets through eBGP (1 to 64; default 1) | os10 |
log_neighbor_changes |
boolean | Configures log neighbors up/down | os10 |
fast_ext_fallover |
boolean | Configures a reset session if a link to a directly connected external peer goes down | os10 |
always_compare_med |
boolean | Configures comparing MED from different neighbors | os10 |
default_loc_pref |
integer | Configures the default local preference value | os10 |
as_notation |
string | Configures AS number notation format | os10 |
enforce_first_as |
boolean | Configures the first AS for eBGP routes | os10 |
non_deterministic_med |
boolean | Configures nondeterministic path selection algorithm | os10 |
outbound_optimization |
boolean | Configures outbound optimization for iBGP peer-group members | os10 |
confederation |
dictionary | Configures AS confederation parameters (see confederation.*) |
os10 |
confederation.identifier |
integer | Configures the routing domain confederation AS | os10 |
confederation.peers |
string | Configures the peer AS in BGP confederation | os10 |
confederation.peers_state |
string: absent,present* | Deletes the peer AS in BGP confederation if set to absent | os10 |
route_reflector |
dictionary | Configures route reflection parameters (see route_reflector.*) |
os10 |
route_reflector.client_to_client |
boolean | Configures client-to-client route reflection | os10 |
route_reflector.cluster_id |
string | Configures the route reflector cluster-id | os10 |
address_family_ipv4 |
dictionary | Configures IPv4 address family parameters (see address_family_ipv4.*) |
os10 |
address_family_ipv4.aggregate_addr |
list | Configures IPv4 BGP aggregate entries (see aggregate_addr.*) |
os10 |
aggregate_addr.ip_and_mask |
string | Configures the IPv4 BGP aggregate address | os10 |
aggregate_addr.adv_map |
string | Configures the advertise map for IPv4 BGP aggregate address | os10 |
aggregate_addr.attr_map |
string | Configures the attribute map for IPv4 BGP aggregate address | os10 |
aggregate_addr.suppress_map |
string | Configures the suppress map for IPv4 BGP aggregate address | os10 |
aggregate_addr.summary_only |
boolean | Sets address to summary only if true | os10 |
aggregate_addr.state |
string: absent,present* | Deletes an IPv4 BGP aggregate entry if set to absent | os10 |
address_family_ipv4.dampening |
dictionary | Configures route-flap dampening (see dampening.*) |
os10 |
dampening.value |
dictionary | Configures dampening values ( format; default 15 750 2000 60) | os10 |
dampening.route_map |
string | Configures the route-map to specify criteria for dampening | os10 |
dampening.state |
string: absent,present* | Deletes dampening if set to absent | os10 |
address_family_ipv4.ibgp_redist_internal |
dictionary | Configures internal BGP reditribution (see ibgp_redist_internal.*) |
os10 |
ibgp_redist_internal.state |
boolean | Configures the internal BGP redistribution for an IPv4 address family | os10 |
address_family_ipv4.default_metric |
integer | Configures the metric of redistributed routes for IPv4 address family | os10 |
address_family_ipv4.distance_bgp |
dictionary | Configures BGP distances (see distance_bgp.*) |
os10 |
distance_bgp.value |
dictionary | Configures the BGP administrative distance for IPv4 address family ( format; distance bgp 2 3 4) | os10 |
distance_bgp.state |
string: absent,present* | Deletes distance BGP if set to absent | os10 |
address_family_ipv6 |
dictionary | Configures IPv6 address family parameters (see address_family_ipv6.*) |
os10 |
address_family_ipv6.aggregate_addr |
list | Configures IPv6 BGP aggregate entries (see aggregate_addr.*) |
os10 |
aggregate_addr.ip_and_mask |
string | Configures the IPv6 BGP aggregate address | os10 |
aggregate_addr.adv_map |
string | Configures the advertise map for IPv6 BGP aggregate address | os10 |
aggregate_addr.attr_map |
string | Configures the attribute map for IPv6 BGP aggregate address | os10 |
aggregate_addr.suppress_map |
string | Configures the suppress map for IPv6 BGP aggregate address | os10 |
aggregate_addr.summary_only |
boolean | Sets address to summary-only if true | os10 |
aggregate_addr.state |
string: absent,present* | Deletes an IPv6 BGP aggregate entry if set to absent | os10 |
address_family_ipv6.dampening |
dictionary | Configures route-flap dampening (see dampening.*) |
os10 |
dampening.value |
dictionary | Configures dampening values ( format; default 15 750 2000 60) | os10 |
dampening.route_map |
string | Configures the route-map to specify criteria for dampening | os10 |
dampening.state |
string: absent,present* | Deletes dampening if set to absent | os10 |
address_family_ipv6.ibgp_redist_internal |
dictionary | Configures iBGP reditribution (see ibgp_redist_internal.*) |
os10 |
ibgp_redist_internal.state |
boolean | Configures the iBGP redistribution for an IPv6 address family | os10 |
address_family_ipv6.default_metric |
integer | Configures the metric of redistributed routes for IPv6 address family | os10 |
address_family_ipv6.distance_bgp |
dictionary | Configures BGP distances (see distance_bgp.*) |
os10 |
distance_bgp.value |
dictionary | Configures the BGP administrative distance for an IPv6 address family ( format; distance bgp 2 3 4) | os10 |
distance_bgp.state |
string: absent,present* | Deletes distance BGP if set to absent | os10 |
best_path |
list | Configures the default best-path selection (see best_path.*) |
os10 |
best_path.as_path |
string (required): ignore,multipath-relax | Configures the AS path used for the best-path computation | os10 |
best_path.as_path_state |
string: absent,present* | Deletes the AS path configuration if set to absent | os10 |
best_path.ignore_router_id |
boolean: true,false | Ignores the router identifier in best-path computation if set to true | os10 |
best_path.med |
list | Configures the MED attribute (see med.*) |
os10 |
med.attribute |
string (required): confed,missing-as-best | Configures the MED attribute used for the best-path computation | os10 |
med.state |
string: absent,present* | Deletes the MED attribute if set to absent | os10 |
ipv4_network |
list | Configures an IPv4 BGP networks (see ipv4_network.*) |
os10 |
ipv4_network.address |
string (required) | Configures the IPv4 address of the BGP network (A.B.C.D/E format) | os10 |
ipv4_network.state |
string: absent,present* | Deletes an IPv4 BGP network if set to absent | os10 |
ipv6_network |
list | Configures an IPv6 BGP network (see ipv6_network.*) |
os10 |
ipv6_network.address |
string (required) | Configures the IPv6 address of the BGP network (2001:4898:5808:ffa2::1/126 format) | os10 |
ipv6_network.state |
string: absent,present* | Deletes an IPv6 BGP network if set to absent | os10 |
neighbor |
list | Configures IPv4 BGP neighbors (see neighbor.*) |
os10 |
neighbor.ip |
string (required) | Configures the IPv4 address of the BGP neighbor (10.1.1.1) | os10 |
neighbor.interface |
string | Configures the BGP neighbor interface details | os10 |
neighbor.name |
string (required) | Configures the BGP peer-group with this name; supported only when the neighbor is a peer group; mutually exclusive with neighbor.ip | os10 |
neighbor.type |
string (required): ipv4,ipv6,peergroup | Specifies the BGP neighbor type | os10 |
neighbor.auto_peer |
string: unnumbered-auto | Enables auto discovery of neighbors | os10 |
neighbor.password |
string | Configures the BGP neighbor password | os10 |
neighbor.peergroup_type |
string (ibgp, ebgp) | Configures the BGP neighbor peer-group type | os10 |
neighbor.ebgp_peergroup |
string | Configures the peer-group to all auto-discovered external neighbors | os10 |
neighbor.ebgp_peergroup_state |
string: present,absent | Removes the peer-group from all auto-discovered external neighbors | os10 |
neighbor.ibgp_peergroup |
string | Configures the peer-group to all auto-discovered internal neighbors | os10 |
neighbor.ibgp_peergroup_state |
string: present,absent | Removes the peer-group from all auto-discovered internal neighbors | os10 |
neighbor.route_reflector_client |
boolean | Configures router reflector client on the BGP neighbor | os10 |
neighbor.local_as |
integer | Configures the local AS for the BGP peer | os10 |
neighbor.weight |
integer | Configures the default weight for routes from the neighbor interface | os10 |
neighbor.send_community |
list | Configures the send community attribute to the BGP neighbor (see send_community.*) |
os10 |
send_community.type |
string (required) | Configures the send community attribute to the BGP neighbor | os10 |
send_community.state |
string: absent,present* | Deletes the send community attribute of the BGP neighbor if set to absent | os10 |
neighbor.address_family |
list | Configures address family commands on the BGP neighbor (see address_family.*) |
os10 |
address_family.type |
string (required): ipv4,ipv6,l2vpn | Configures IPv4/IPv6/EVPN address family command mode on the BGP neighbor | os10 |
address_family.activate |
boolean | Configures activation/deactivation of IPv4/IPv6 address family command mode on the BGP neighbor | os10 |
address_family.sender_loop_detect |
boolean | Enables/disables the sender-side loop detection process for a BGP neighbor of IPv4/IPv6/l2vpn address family | os10 |
address_family.allow_as_in |
integer | Configures the local AS number in the as-path | os10 |
address_family.next_hop_self |
boolean | Configures disabling the next-hop calculation for the neighbor | os10 |
address_family.soft_reconf |
boolean | Configures per neighbor soft reconfiguration | os10 |
address_family.add_path |
string | Configures send or receive multiple paths (value can be 'both ', 'send ', 'receive') | os10 |
address_family.route_map |
list | Configures the route-map on the BGP neighbor (see route_map.*) |
os10 |
route_map.name |
string | Configures the name of the route-map for the BGP neighbor | os10 |
route_map.filter |
string | Configures the filter for routing updates | os10 |
route_map.state |
string, choices: absent,present* | Deletes the route-map of the BGP neighbor if set to absent | os10 |
address_family.max_prefix |
dictionary | Configures maximum-prefix parameters (see max_prefix.\*) |
os10 |
max_prefix.count |
integer | Configures maximum number of prefix accepted from the peer | os10 |
max_prefix.state |
string: absent,present | Deletes maximum prefix configured for the peer | os10 |
max_prefix.threshold |
integer | Configures threshold percentage at which warning log is thrown | os10 |
max_prefix.warning |
boolean | Configures a warning without dropping the session when maximum limit exceeds if set to true | os10 |
address_family.default_originate |
dictionary | Configures default-originate parameters (see default_originate.\*) |
os10 |
default_originate.route_map |
string | Configures the name of the route-map to specify criteria to originate default | os10 |
default_originate.state |
string, choices: absent,present* | Deletes the default-originate if set to absent | os10 |
address_family.distribute_list |
list | Configures the distribute list to filter networks from routing updates (see distribute_list.*) |
os10 |
distribute_list.in |
string | Configures the name of the prefix-list to filter incoming packets | os10 |
distribute_list.in_state |
string: absent,present* | Deletes the filter at incoming packets if set to absent | os10 |
distribute_list.out |
string | Configures the name of the prefix-list to filter outgoing packets | os10 |
distribute_list.out_state |
string: absent,present* | Deletes the filter at outgoing packets if set to absent | os10 |
address_family.state |
string: absent,present* | Deletes the address family command mode of the BGP neighbor if set to absent | os10 |
neighbor.remote_asn |
string (required) | Configures the remote AS number of the BGP neighbor | os10 |
neighbor.remote_asn_state |
string: absent,present* | Deletes the remote AS number from the peer group if set to absent; supported only when neighbor.type is "peergroup" | os10 |
neighbor.timer |
string | Configures neighbor timers; 5 10, where 5 is the keepalive interval and 10 is the holdtime | os10 |
neighbor.peergroup |
string | Configures neighbor to BGP peer-group (configured peer-group name) | os10 |
neighbor.peergroup_state |
string: absent,present* | Deletes the IPv4 BGP neighbor from the peer-group if set to absent | os10 |
neighbor.distribute_list |
list | Configures the distribute list to filter networks from routing updates (see distribute_list.*) |
os10 |
distribute_list.in |
string | Configures the name of the prefix-list to filter incoming packets | os10 |
distribute_list.in_state |
string: absent,present* | Deletes the filter at incoming packets if set to absent | os10 |
distribute_list.out |
string | Configures the name of the prefix-list to filter outgoing packets | os10 |
distribute_list.out_state |
string: absent,present* | Deletes the filter at outgoing packets if set to absent | os10 |
neighbor.admin |
string: up,down | Configures the administrative state of the neighbor | os10 |
neighbor.adv_interval |
integer | Configures the advertisement interval of the neighbor | os10 |
neighbor.adv_start |
integer | Set the advertisement start of the neighbor | os10 |
neighbor.adv_start_state |
string: absent,present* | Configures or unconfigures the advertisement start of a neighbor | os10 |
neighbor.conn_retry_timer |
integer | Configures the peer connection retry timer | os10 |
neighbor.remove_pri_as |
string: absent,present | Configures the remove private AS number from outbound updates | os10 |
neighbor.fall_over |
string: absent,present | Configures the session fall on peer-route loss | os10 |
neighbor.sender_loop_detect |
boolean: true,false | Enables or disables the sender-side loop detect for neighbors | os10 |
neighbor.src_loopback |
integer | Configures the source loopback interface for routing packets | os10 |
neighbor.ebgp_multihop |
integer | Configures the maximum-hop count value allowed in eBGP neighbors that are not directly connected (default 255) | os10 |
neighbor.listen |
list | Configures listen commands on the BGP template (see listen.*) |
os10 |
listen.subnet |
string (required) | Configures the passive BGP neighbor IPv4/IPv6 to this subnet | os10 |
listen.subnet_state |
string: absent,present* | Deletes the subnet range set for dynamic IPv4/IPv6 BGP neighbor if set to absent | os10 |
listen.limit |
integer | Configures maximum dynamic peers count (key is required together with neighbor.subnet) |
os10 |
neighbor.bfd |
boolean | Enables BFD for neighbor | os10 |
neighbor.description |
string | Configures neighbor description | os10 |
neighbor.state |
string: absent,present* | Deletes the IPv4 BGP neighbor if set to absent | os10 |
redistribute |
list | Configures the redistribute list to get information from other routing protocols (see redistribute.*) |
os10 |
redistribute.route_type |
string (required): static,connected,imported_bgp,l2vpn,ospf | Configures the name of the routing protocol to redistribute | os10 |
redistribute.route_map_name |
string | Configures the route-map to redistribute | os10 |
redistribute.imported_bgp_vrf_name |
string | Configures the redistribute imported BGP VRF name | os10 |
redistribute.ospf_id |
string | Configures the redistribute OSPF | os10 |
redistribute.address_type |
string (required): ipv4,ipv6 | Configures the address type of IPv4 or IPv6 routes | os10 |
redistribute.state |
string: absent,present* | Deletes the redistribution information if set to absent | os10 |
bfd_all_neighbors |
dictionary | Enables BFD for all BGP neighbors | os10 |
bfd_all_neighbors.interval |
integer: 100 to 1000 | Configures time interval for sending control packets to BFD peers in ms | os10 |
bfd_all_neighbors.min_rx |
integer: 100 to 1000 | Configures maximum waiting time for receiving control packets from BFD peers in ms | os10 |
bfd_all_neighbors.multiplier |
integer: 3 to 50 | Configures maximum number of consecutive packets that are not received from BFD peers before session state changes to Down | os10 |
bfd_all_neighbors.role |
string: active, passive | Configures BFD role | os10 |
bfd_all_neighbors.state |
string: absent,present* | Deletes BFD for all neighbors if set to absent | os10 |
vrfs |
list | Enables VRF under BGP | os10 |
vrf.name |
string (Required) | Configures VRF name | os10 |
vrf.router_id |
string | Configures the IP address of the local BGP router instance in VRF | os10 |
vrf.graceful_restart |
boolean | Configures graceful restart capability in VRF | os10 |
vrf.maxpath_ibgp |
integer | Configures the maximum number of paths to forward packets through iBGP (1 to 64; default 1) in VRF | os10 |
vrf.maxpath_ebgp |
integer | Configures the maximum number of paths to forward packets through eBGP (1 to 64; default 1) in VRF | os10 |
vrf.log_neighbor_changes |
boolean | Configures log neighbors up/down in VRF | os10 |
vrf.fast_ext_fallover |
boolean | Configures a reset session if a link to a directly connected external peer goes down in VRF | os10 |
vrf.always_compare_med |
boolean | Configures comparing MED from different neighbors in VRF | os10 |
vrf.default_loc_pref |
integer | Configures the default local preference value in VRF | os10 |
vrf.as_notation |
string | Changes the AS number notation format in VRF | os10 |
vrf.enforce_first_as |
boolean | Configures the first AS for eBGP routes in VRF | os10 |
vrf.non_deterministic_med |
boolean | Configures nondeterministic path selection algorithm in VRF | os10 |
vrf.outbound_optimization |
boolean | Configures outbound optimization for iBGP peer-group members in VRF | os10 |
vrf.route_reflector |
dictionary | Configures route reflection parameters (see route_reflector.*) in VRF |
os10 |
vrf.route_reflector.client_to_client |
boolean | Configures client-to-client route reflection in VRF | os10 |
vrf.route_reflector.cluster_id |
string | Configures the route-reflector cluster-id in VRF | os10 |
vrf.address_family_ipv4 |
dictionary | Configures IPv4 address family parameters in VRF (see address_family_ipv4.*) in VRF |
os10 |
address_family_ipv4.aggregate_addr |
list | Configures IPv4 BGP aggregate entries (see aggregate_addr.*) in VRF |
os10 |
aggregate_addr.ip_and_mask |
string | Configures the IPv4 BGP aggregate address in VRF | os10 |
aggregate_addr.adv_map |
string | Configures the advertise map for IPv4 BGP aggregate address | os10 |
aggregate_addr.attr_map |
string | Configures the attribute map for IPv4 BGP aggregate address | os10 |
aggregate_addr.suppress_map |
string | Configures the suppress map for IPv4 BGP aggregate address | os10 |
aggregate_addr.summary_only |
boolean | Sets address to summary-only if true in VRF | os10 |
aggregate_addr.state |
string: absent,present* | Deletes an IPv4 BGP aggregate entry if set to absent in VRF | os10 |
address_family_ipv4.dampening |
dictionary | Configures route-flap dampening (see dampening.*) |
os10 |
dampening.value |
dictionary | Configures dampening values ( format; default 15 750 2000 60) | os10 |
dampening.route_map |
string | Configures the route-map to specify criteria for dampening | os10 |
dampening.state |
string: absent,present* | Deletes dampening if set to absent | os10 |
address_family_ipv4.ibgp_redist_internal |
dictionary | Configures iBGP reditribution (see ibgp_redist_internal.*) |
os10 |
ibgp_redist_internal.state |
boolean | Configures the iBGP redistribution for a IPV4 address family | os10 |
address_family_ipv4.default_metric |
integer | Configures the metric of redistributed routes for IPV4 address family | os10 |
address_family_ipv4.distance_bgp |
dictionary | Configures BGP distances (see distance_bgp.*) |
os10 |
distance_bgp.value |
dictionary | Configures the BGP administrative distance for IPV4 address family ( format; distance bgp 2 3 4) | os10 |
distance_bgp.state |
string: absent,present* | Deletes distance BGP if set to absent | os10 |
vrf.address_family_ipv6 |
dictionary | Configures IPv6 address family parameters in VRF (see address_family_ipv6.*) |
os10 |
address_family_ipv6.aggregate_addr |
list | Configures IPv6 BGP aggregate entries (see aggregate_addr.*) |
os10 |
aggregate_addr.ip_and_mask |
string | Configures the IPv6 BGP aggregate address | os10 |
aggregate_addr.adv_map |
string | Configures the advertise map for IPv6 BGP aggregate address | os10 |
aggregate_addr.attr_map |
string | Configures the attribute map for IPv6 BGP aggregate address | os10 |
aggregate_addr.suppress_map |
string | Configures the suppress map for IPv6 BGP aggregate address | os10 |
aggregate_addr.summary_only |
boolean | Sets address to summary-only if true | os10 |
aggregate_addr.state |
string: absent,present* | Deletes an IPv6 BGP aggregate entry if set to absent | os10 |
address_family_ipv6.dampening |
dictionary | Configures route-flap dampening (see dampening.*) |
os10 |
dampening.value |
dictionary | Configures dampening values ( format; default 15 750 2000 60) | os10 |
dampening.route_map |
string | Configures the route-map to specify criteria for dampening | os10 |
dampening.state |
string: absent,present* | Deletes dampening if set to absent | os10 |
address_family_ipv6.ibgp_redist_internal |
dictionary | Configures iBGP reditribution (see ibgp_redist_internal.*) |
os10 |
ibgp_redist_internal.state |
boolean | Configures the iBGP redistribution for a IPv6 address family | os10 |
address_family_ipv6.default_metric |
integer | Configures the metric of redistributed routes for IPv6 address family | os10 |
address_family_ipv6.distance_bgp |
dictionary | Configures BGP distances (see distance_bgp.*) |
os10 |
distance_bgp.value |
dictionary | Configures the BGP administrative distance for IPv6 address family ( format; distance bgp 2 3 4) | os10 |
distance_bgp.state |
string: absent,present* | Deletes distance BGP if set to absent | os10 |
vrf.best_path |
list | Configures the default best-path selection in VRF (see best_path.*) |
os10 |
best_path.as_path |
string (required): ignore,multipath-relax | Configures the AS path used for the best-path computation | os10 |
best_path.as_path_state |
string: absent,present* | Deletes the AS path configuration if set to absent | os10 |
best_path.ignore_router_id |
boolean: true,false | Ignores the router identifier in best-path computation if set to true | os10 |
best_path.med |
list | Configures the MED attribute (see med.*) |
os10 |
med.attribute |
string (required): confed,missing-as-best | Configures the MED attribute used for the best-path computation | os10 |
med.state |
string: absent,present* | Deletes the MED attribute if set to absent | os10 |
vrf.ipv4_network |
list | Configures an IPv4 BGP networks (see ipv4_network.*) |
os10 |
ipv4_network.address |
string (required) | Configures the IPv4 address of the BGP network (A.B.C.D/E format) | os10 |
ipv4_network.state |
string: absent,present* | Deletes an IPv4 BGP network if set to absent | os10 |
vrf.ipv6_network |
list | Configures an IPv6 BGP network (see ipv6_network.*) |
os10 |
ipv6_network.address |
string (required) | Configures the IPv6 address of the BGP network (2001:4898:5808:ffa2::1/126 format) | os10 |
ipv6_network.state |
string: absent,present* | Deletes an IPv6 BGP network if set to absent | os10 |
vrf.neighbor |
list | Configures IPv4 BGP neighbors in VRF (see neighbor.*) |
os10 |
neighbor.ip |
string (required) | Configures the IPv4 address of the BGP neighbor (10.1.1.1) | os10 |
neighbor.interface |
string | Configures the BGP neighbor interface details | os10 |
neighbor.name |
string (required) | Configures the BGP peer-group with this name; supported only when the neighbor is a peer group; mutually exclusive with neighbor.ip | os10 |
neighbor.type |
string (required): ipv4,ipv6,peergroup | Specifies the BGP neighbor type | os10 |
neighbor.auto_peer |
string: unnumbered-auto | Enable auto-discovery of neighbors | os10 |
neighbor.password |
string | Configures the BGP neighbor password | os10 |
neighbor.peergroup_type |
string (ibgp, ebgp) | Configures the BGP neighbor peer-group type | os10 |
neighbor.ebgp_peergroup |
string | Configures the peer-group to all auto-discovered external neighbors | os10 |
neighbor.ebgp_peergroup_state |
string: present,absent | Removes the peer-group from all auto-discovered external neighbors | os10 |
neighbor.ibgp_peergroup |
string | Configures the peer-group to all auto-discovered internal neighbors | os10 |
neighbor.ibgp_peergroup_state |
string: present,absent | Removes the peer-group from all auto-discovered internal neighbors | os10 |
neighbor.route_reflector_client |
boolean | Configures router reflector client on the BGP neighbor | os10 |
neighbor.local_as |
integer | Configures the local AS for the BGP peer | os10 |
neighbor.weight |
integer | Configures the default weight for routes from the neighbor interface | os10 |
neighbor.send_community |
list | Configures the send community attribute to the BGP neighbor (see send_community.*) |
os10 |
send_community.type |
string (required) | Configures the send community attribute to the BGP neighbor | os10 |
send_community.state |
string: absent,present* | Deletes the send community attribute of the BGP neighbor if set to absent | os10 |
neighbor.address_family |
list | Configures address family commands on the BGP neighbor (see address_family.*) |
os10 |
address_family.type |
string (required): ipv4,ipv6,l2vpn | Configures IPv4/IPv6 EVPN address family command mode on the BGP neighbor | os10 |
address_family.activate |
boolean | Configures activation or deactivation of IPv4/IPv6 address family command mode on the BGP neighbor | os10 |
address_family.sender_loop_detect |
boolean | Enables or disables the sender-side loop detection process for a BGP neighbor of IPv4/IPv6 l2vpn address family | os10 |
address_family.allow_as_in |
integer | Configures the local AS number in the as-path | os10 |
address_family.next_hop_self |
boolean | Configures disabling the next-hop calculation for the neighbor | os10 |
address_family.soft_reconf |
boolean | Configures per neighbor soft reconfiguration | os10 |
address_family.add_path |
string | Configures send or receive multiple paths (value can be 'both ', 'send ', 'receive') | os10 |
address_family.route_map |
list | Configures the route-map on the BGP neighbor (see route_map.*) |
os10 |
route_map.name |
string | Configures the name of the route-map for the BGP neighbor | os10 |
route_map.filter |
string | Configures the filter for routing updates | os10 |
route_map.state |
string, choices: absent,present* | Deletes the route-map of the BGP neighbor if set to absent | os10 |
address_family.max_prefix |
dictionary | Configures maximum-prefix parameters (see max_prefix.*) |
os10 |
max_prefix.count |
integer | Configures maximum number of prefix accepted from the peer | os10 |
max_prefix.state |
string: absent,present | Deletes maximum prefix configured for the peer | os10 |
max_prefix.threshold |
integer | Configures threshold percentage at which warning log is thrown | os10 |
max_prefix.warning |
boolean | Configures a warning without dropping session when maximum limit exceeds if set to true | os10 |
address_family.default_originate |
dictionary | Configures default-originate parameters (see default_originate.\*) |
os10 |
default_originate.route_map |
string | Configures the name of the route-map to specify criteria to originate default | os10 |
default_originate.state |
string, choices: absent,present* | Deletes the default-originate if set to absent | os10 |
address_family.distribute_list |
list | Configures the distribute list to filter networks from routing updates (see distribute_list.*) |
os10 |
distribute_list.in |
string | Configures the name of the prefix-list to filter incoming packets | os10 |
distribute_list.in_state |
string: absent,present* | Deletes the filter at incoming packets if set to absent | os10 |
distribute_list.out |
string | Configures the name of the prefix-list to filter outgoing packets | os10 |
distribute_list.out_state |
string: absent,present* | Deletes the filter at outgoing packets if set to absent | os10 |
address_family.state |
string: absent,present* | Deletes the address family command mode of the BGP neighbor if set to absent | os10 |
neighbor.remote_asn |
string (required) | Configures the remote AS number of the BGP neighbor | os10 |
neighbor.remote_asn_state |
string: absent,present* | Deletes the remote AS number from the peer-group if set to absent; supported only when neighbor.type is "peergroup" | os10 |
neighbor.timer |
string | Configures neighbor timers; 5 10, where 5 is the keepalive interval and 10 is the holdtime | os10 |
neighbor.peergroup |
string | Configures neighbor to BGP peer-group (configured peer-group name) | os10 |
neighbor.peergroup_state |
string: absent,present* | Deletes the IPv4 BGP neighbor from the peer-group if set to absent | os10 |
neighbor.distribute_list |
list | Configures the distribute list to filter networks from routing updates (see distribute_list.*) |
os10 |
distribute_list.in |
string | Configures the name of the prefix-list to filter incoming packets | os10 |
distribute_list.in_state |
string: absent,present* | Deletes the filter at incoming packets if set to absent | os10 |
distribute_list.out |
string | Configures the name of the prefix-list to filter outgoing packets | os10 |
distribute_list.out_state |
string: absent,present* | Deletes the filter at outgoing packets if set to absent | os10 |
neighbor.admin |
string: up,down | Configures the administrative state of the neighbor | os10 |
neighbor.adv_interval |
integer | Configures the advertisement interval of the neighbor | os10 |
neighbor.adv_start |
integer | Set the advertisement start of the neighbor | os10 |
neighbor.adv_start_state |
string: absent,present* | Configures or unconfigures the advertisement start of the neighbor | os10 |
neighbor.conn_retry_timer |
integer | Configures the peer connection retry timer | os10 |
neighbor.remove_pri_as |
string: absent,present | Removes private AS number from outbound updates | os10 |
neighbor.fall_over |
string: absent,present | Configures the session fall on peer-route loss | os10 |
neighbor.sender_loop_detect |
boolean: true,false | Enables or disables the sender-side loop detect for neighbors | os10 |
neighbor.src_loopback |
integer | Configures the source loopback interface for routing packets | os10 |
neighbor.ebgp_multihop |
integer | Configures the maximum-hop count value allowed in eBGP neighbors that are not directly connected (default 255) | os10 |
neighbor.listen |
list | Configures listen commands on the BGP template (see listen.*) |
os10 |
listen.subnet |
string (required) | Configures the passive BGP neighbor IPv4/IPv6 to this subnet | os10 |
listen.subnet_state |
string: absent,present* | Deletes the subnet range set for dynamic IPv4/IPv6 BGP neighbor if set to absent | os10 |
listen.limit |
integer | Configures maximum dynamic peers count (key is required together with neighbor.subnet) |
os10 |
neighbor.bfd |
boolean | Enables BFD for neighbor | os10 |
neighbor.description |
string | Configures neighbor description | os10 |
neighbor.state |
string: absent,present* | Deletes the IPv4 BGP neighbor if set to absent | os10 |
vrf.redistribute |
list | Configures the redistribute list to get information from other routing protocols in VRF (see redistribute.*) |
os10 |
redistribute.route_type |
string (required): static,connected,imported_bgp | Configures the name of the routing protocol to redistribute | os10 |
redistribute.route_map_name |
string | Configures the route-map to redistribute | os10 |
redistribute.imported_bgp_vrf_name |
string | Configures the redistribute imported BGP VRF name | os10 |
redistribute.ospf_id |
string | Configures the redistribute ospf | os10 |
redistribute.address_type |
string (required): ipv4,ipv6 | Configures the address type of IPv4 or IPv6 routes | os10 |
redistribute.state |
string: absent,present* | Deletes the redistribution information if set to absent | os10 |
vrf.bfd_all_neighbors |
dictionary | Enables BFD for all BGP neighbors in VRF ((see bfd_all_neighbors.*)) |
os10 |
bfd_all_neighbors.interval |
integer: 100 to 1000 | Configures time interval for sending control packets to BFD peers in ms | os10 |
bfd_all_neighbors.min_rx |
integer: 100 to 1000 | Configures maximum waiting time for receiving control packets from BFD peers in ms | os10 |
bfd_all_neighbors.multiplier |
integer: 3 to 50 | Configures maximum number of consecutive packets that are not received from BFD peers before session state changes to Down | os10 |
bfd_all_neighbors.role |
string: active, passive | Configures BFD role | os10 |
bfd_all_neighbors.state |
string: absent,present* | Deletes BFD for all neighbors if set to absent | os10 |
vrf.state |
string: absent,present* | Deletes the VRF instance under router BGP if set to absent | os10 |
state |
string: absent,present* | Deletes the local router BGP instance if set to absent | os10 |
NOTE: Asterisk (*) denotes the default value if none is specified.
Ansible Dell EMC network roles require connection information to establish communication with the nodes in your inventory. This information can exist in the Ansible group_vars or host_vars directories or inventory, or in the playbook itself.
| Key | Required | Choices | Description |
|---|---|---|---|
ansible_host |
yes | Specifies the hostname or address for connecting to the remote device over the specified transport | |
ansible_port |
no | Specifies the port used to build the connection to the remote device; if value is unspecified, the ANSIBLE_REMOTE_PORT option is used; it defaults to 22 |
|
ansible_ssh_user |
no | Specifies the username that authenticates the CLI login for the connection to the remote device; if value is unspecified, the ANSIBLE_REMOTE_USER environment variable value is used |
|
ansible_ssh_pass |
no | Specifies the password that authenticates the connection to the remote device | |
ansible_become |
no | yes, no* | Instructs the module to enter privileged mode on the remote device before sending any commands; if value is unspecified, the ANSIBLE_BECOME environment variable value is used, and the device attempts to execute all commands in non-privileged mode |
ansible_become_method |
no | enable, sudo* | Instructs the module to allow the become method to be specified for handling privilege escalation; if value is unspecified, the ANSIBLE_BECOME_METHOD environment variable value is used |
ansible_become_pass |
no | Specifies the password to use if required to enter privileged mode on the remote device; if ansible_become is set to no this key is not applicable |
|
ansible_network_os |
yes | os10, null* | Loads the correct terminal and cliconf plugins to communicate with the remote device |
NOTE: Asterisk (*) denotes the default value if none is specified.
This example uses the os10_bgp role to configure the BGP network and neighbors. It creates a hosts file with the switch details, a host_vars file with connection variables and the corresponding role variables. The hosts file should define the ansible_network_os variable with the corresponding Dell EMC OS10 name.
When os10_cfg_generate is set to true, the variable generates the configuration commands as a .part file in build_dir path. By default, the variable is set to false. This example writes a simple playbook that only references the os10_bgp role.
Sample hosts file
leaf1 ansible_host= <ip_address>
Sample host_vars/leaf1
hostname: leaf1
ansible_become: yes
ansible_become_method: xxxxx
ansible_become_pass: xxxxx
ansible_ssh_user: xxxxx
ansible_ssh_pass: xxxxx
ansible_network_os: dellemc.os10.os10
build_dir: ../temp/temp_os10
os10_bgp:
asn: 12
router_id: 90.1.1.4
maxpath_ibgp: 2
maxpath_ebgp: 2
graceful_restart: true
log_neighbor_changes: true
fast_ext_fallover: false
always_compare_med: true
default_loc_pref: 1000
as_notation: asdot
enforce_first_as: false
non_deterministic_med: true
outbound_optimization: true
confederation:
identifier: 25
peers: 23 24
peers_state: present
route_reflector:
client_to_client: false
cluster_id: 4294967295
address_family_ipv4:
aggregate_address:
- ip_and_mask: 1.1.1.1/16
state: present
summary_only: true
dampening:
value: 15 750 2000 60
route_map: qq
state: present
ibgp_redist_internal:
state: present
default_metric: 10
distance_bgp:
value: 3 4 6
state: present
address_family_ipv6:
aggregate_address:
- ip_and_mask: 2001:4898:5808:ffa0::/126
state: present
summary_only: true
ibgp_redist_internal:
state: present
best_path:
as_path: ignore
as_path_state: present
ignore_router_id: true
med:
- attribute: confed
state: present
ipv4_network:
- address: 101.1.1.0/30
state: present
ipv6_network:
- address: "2001:4898:5808:ffa0::/126"
state: present
neighbor:
- name: ebgp_pg
type: peergroup
bfd: yes
state: present
address_family:
- type: ipv4
activate: false
state: present
max_prefix:
count: 20
threshold: 90
warning: true
state: present
listen:
- subnet: 4.4.4.4/32
limit: 4
subnet_state: present
- subnet: 20::/64
limit: 4
subnet_state: present
- name: ibgp_pg
type: peergroup
weight: 10
state: present
- type: ipv4
interface: vlan20
send_community:
- type: extended
state: present
address_family:
- type: l2vpn
activate: true
state: present
admin: up
state: present
- type: ipv4
description: "U_site2-spine1"
remote_asn: 11
ip: 192.168.10.1
peergroup: peer1
peergroup_state: present
peergroup_type: ibgp
adv_interval: 40
fall_over: present
password: bgppassword
route_reflector_client: true
adv_start: 100
adv_start_state: present
conn_retry_timer: 20
remove_pri_as: present
src_loopback: 0
address_family:
- type: ipv4
activate: true
state: present
max_prefix:
count: 10
threshold: 40
warning: true
state: present
default_originate:
route_map: aa
state: present
distribute_list:
in: XX
in_state: present
out: YY
out_state: present
send_community:
- type: standard
state: present
state: present
- type: ipv4
remote_asn: 13
local_as: 10
weight: 10
ip: 192.168.12.3
address_family:
- type: ipv4
activate: true
allow_as_in: 5
next_hop_self: true
soft_reconf: true
add_path: both 3
route_map:
- name: qq
filter: in
state: present
state: present
state: present
- type: ipv6
remote_asn: 14
ip: 2001:4898:5808:ffa2::1
state: present
- type: ipv6
description: "U_site2-spine1-Auto Discovered peers"
auto_peer: unnumbered-auto
ebgp_peergroup: ebgp_pg
ebgp_peergroup_state: absent
ibgp_peergroup: ibgp_pg
ibgp_peergroup_state: present
sender_loop_detect: true
password: bgppassword
address_family:
- type: ipv4
activate: true
sender_loop_detect: true
state: present
allow_as_in: 5
next_hop_self: true
soft_reconf: true
- type: l2vpn
activate: true
sender_loop_detect: false
state: present
send_community:
- type: standard
state: present
admin: up
state: present
redistribute:
- route_type: static
route_map_name: aa
address_type: ipv4
state: present
bfd_all_neighbors:
interval: 200
min_rx: 200
multiplier: 3
role: active
state: present
vrfs:
- name: "GREEN"
router_id: 50.1.1.1
maxpath_ibgp: 2
maxpath_ebgp: 2
graceful_restart: true
log_neighbor_changes: false
fast_ext_fallover: false
always_compare_med: true
default_loc_pref: 1000
route_reflector:
client_to_client: false
cluster_id: 1
address_family_ipv4:
aggregate_address:
- ip_and_mask: 1.1.1.1/16
state: present
dampening:
value: 15 750 2000 60
route_map: qq
state: present
ibgp_redist_internal:
state: present
address_family_ipv6:
aggregate_address:
- ip_and_mask: 2001:4898:5808:ffa0::/126
state: present
summary_only: true
ibgp_redist_internal:
state: present
best_path:
as_path: ignore
as_path_state: present
ignore_router_id: true
med:
- attribute: confed
state: present
- attribute: missing-as-worst
state: present
ipv4_network:
- address: 101.1.1.0/30
state: present
ipv6_network:
- address: "2001:4898:5808:ffa0::/126"
state: present
neighbor:
- name: peer1
type: peergroup
bfd: yes
state: present
- name: ebgp_pg
type: peergroup
bfd: yes
state: present
- name: ibgp_pg
type: peergroup
weight: 10
state: present
- type: ipv4
interface: vlan10
description: U_site2 vlan
send_community:
- type: extended
state: present
admin: up
state: present
- type: ipv4
description: "U_site2 spine1"
remote_asn: 11
ip: 192.168.20.1
name: peer1
peergroup: peer1
peergroup_state: present
peergroup_type: ibgp
adv_interval: 40
fall_over: present
route_reflector_client: true
src_loopback: 0
address_family:
- type: ipv4
activate: false
state: present
send_community:
- type: standard
state: present
state: present
- type: ipv4
description: "U_site2 spine1"
remote_asn: 13
local_as: 10
weight: 10
ip: 192.168.15.3
address_family:
- type: ipv4
activate: false
allow_as_in: 5
next_hop_self: true
soft_reconf: true
add_path: both 3
route_map:
- name: qq
filter: in
state: present
state: present
state: present
- type: ipv6
remote_asn: 14
ip: 2001:4898:5808:ffa2::1
state: present
- type: ipv6
description: "U_site2-spine1-Auto Discovered peers"
auto_peer: unnumbered-auto
ebgp_peergroup: ebgp_pg
ebgp_peergroup_state: present
ibgp_peergroup: ibgp_pg
ibgp_peergroup_state: present
address_family:
- type: ipv4
activate: false
sender_loop_detect: false
state: present
allow_as_in: 5
next_hop_self: true
soft_reconf: true
send_community:
- type: standard
state: present
admin: up
state: present
redistribute:
- route_type: static
route_map_name: aa
address_type: ipv4
state: present
- route_type: connected
route_map_name: bb
address_type: ipv4
state: present
- route_type: l2vpn
route_map_name: cc
address_type: ipv4
state: present
- route_type: imported_bgp
imported_bgp_vrf_name: test6
route_map_name: dd
address_type: ipv4
state: present
- route_type: ospf
ospf_id: 12
address_type: ipv4
state: present
bfd_all_neighbors:
interval: 200
min_rx: 200
multiplier: 3
role: active
state: present
state: present
state: present
Simple playbook to configure BGP — leaf.yaml
- hosts: leaf1
roles:
- dellemc.os10.os10_bgp
Run
ansible-playbook -i hosts leaf.yaml
(c) 2017-2020 Dell Inc. or its subsidiaries. All rights reserved.