diff --git a/README.md b/README.md
index 5878f373..e6856614 100644
--- a/README.md
+++ b/README.md
@@ -1,10 +1,10 @@
 # Horus
 
-[![R&D](https://img.shields.io/badge/-R%26D-brightgreen.svg)](https://github.com/bqlabs/horus)
+[![R&D](https://img.shields.io/badge/-R%26D-brightgreen.svg)](https://github.com/LibreScanner/horus)
 [![License](http://img.shields.io/:license-gpl-blue.svg)](http://opensource.org/licenses/GPL-2.0)
 [![Documentation Status](https://readthedocs.org/projects/horus/badge/?version=release-0.2)](http://horus.readthedocs.io/en/release-0.2/?badge=release-0.2)
 
-Horus is a general solution for 3D laser scanning. It provides graphic user interfaces for connection, configuration, control, calibration and scanning with Open Source [Ciclop 3D Scanner](https://github.com/bqlabs/ciclop).
+Horus is a general solution for 3D laser scanning. It provides graphic user interfaces for connection, configuration, control, calibration and scanning with Open Source [Ciclop 3D Scanner](https://github.com/LibreScanner/ciclop).
 
 This is a research project to explore the 3D laser scan with free tools. Feel free to use it for experiments, modify and adapt it to new devices and contribute new features or ideas.
 
diff --git a/doc/development/ubuntu.md b/doc/development/ubuntu.md
index f6ff2e2c..30b2e63f 100644
--- a/doc/development/ubuntu.md
+++ b/doc/development/ubuntu.md
@@ -96,7 +96,7 @@ or
 git clone git@github.com:bq/opencv.git
 ```
 
-And build it your own: [instructions](https://github.com/bqlabs/opencv/wiki/Build)
+And build it your own: [instructions](https://github.com/LibreScanner/opencv/wiki/Build)
 
 ## 3. Execute source code
 
diff --git a/doc/installation/debian.md b/doc/installation/debian.md
index 6853c161..25cff752 100644
--- a/doc/installation/debian.md
+++ b/doc/installation/debian.md
@@ -8,7 +8,7 @@ Versions: 8
 
 However it can be installed following the next instructions.
 
-First you need to build and install our [custom OpenCV](https://github.com/bqlabs/opencv/wiki/Build)
+First you need to build and install our [custom OpenCV](https://github.com/LibreScanner/opencv/wiki/Build)
 
 Then, generate the executable file following the next [instructions](../development/ubuntu.md).
 
diff --git a/doc/readthedocs/locale/en/LC_MESSAGES/source.po b/doc/readthedocs/locale/en/LC_MESSAGES/source.po
index e772d76c..aaceb798 100644
--- a/doc/readthedocs/locale/en/LC_MESSAGES/source.po
+++ b/doc/readthedocs/locale/en/LC_MESSAGES/source.po
@@ -638,7 +638,7 @@ msgstr ""
 #: ../../source/scanner-components/board.rst:25
 msgid ""
 "The firmware is an adaptation of Grbl. Source code is here: "
-"https://github.com/bqlabs/horus-fw."
+"https://github.com/LibreScanner/horus-fw."
 msgstr ""
 
 #: ../../source/scanner-components/board.rst:27
diff --git a/doc/readthedocs/locale/es/LC_MESSAGES/source.po b/doc/readthedocs/locale/es/LC_MESSAGES/source.po
index 56ec6974..26d7eaf4 100644
--- a/doc/readthedocs/locale/es/LC_MESSAGES/source.po
+++ b/doc/readthedocs/locale/es/LC_MESSAGES/source.po
@@ -745,10 +745,10 @@ msgstr "Horus Firmware"
 #: ../../source/scanner-components/board.rst:25
 msgid ""
 "The firmware is an adaptation of Grbl. Source code is here: https://github."
-"com/bqlabs/horus-fw."
+"com/LibreScanner/horus-fw."
 msgstr ""
 "El firmware es una adaptación de Grbl. El código fuente está aquí: https://"
-"github.com/bqlabs/horus-fw."
+"github.com/LibreScanner/horus-fw."
 
 #: ../../source/scanner-components/board.rst:27
 msgid "It can be uploaded in **Preferences > Upload firmware**."
diff --git a/doc/readthedocs/source/getting-started/index.rst b/doc/readthedocs/source/getting-started/index.rst
index f28e1e27..41ec633f 100644
--- a/doc/readthedocs/source/getting-started/index.rst
+++ b/doc/readthedocs/source/getting-started/index.rst
@@ -11,7 +11,7 @@ It provides a graphical interface that allows you to connect the scanner, contro
 
 It was created by `bqlabs`_, the Department of Innovation and Robotics at `BQ`_, developed in `Python`_ and released under the `GPLv2`_ license.
 
-.. _open 3D scanner Ciclop: https://github.com/bqlabs/ciclop
+.. _open 3D scanner Ciclop: https://github.com/LibreScanner/ciclop
 .. _bqlabs: https://github.com/bqlabs
 .. _BQ: http://www.bq.com
 .. _Python: https://www.python.org/
diff --git a/doc/readthedocs/source/installation/macosx.rst b/doc/readthedocs/source/installation/macosx.rst
index c8a9c6b2..b2215f4c 100644
--- a/doc/readthedocs/source/installation/macosx.rst
+++ b/doc/readthedocs/source/installation/macosx.rst
@@ -28,4 +28,4 @@ Reboot the computer to apply the changes.
 
 
 .. _FTDI USB Drivers: http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_3.dmg
-.. _Horus installer: https://github.com/bqlabs/horus/releases/download/0.2rc1/Horus_0.2rc1.dmg
+.. _Horus installer: https://github.com/LibreScanner/horus/releases/download/0.2rc1/Horus_0.2rc1.dmg
diff --git a/doc/readthedocs/source/installation/ubuntu.rst b/doc/readthedocs/source/installation/ubuntu.rst
index 25fa1deb..b684de2d 100644
--- a/doc/readthedocs/source/installation/ubuntu.rst
+++ b/doc/readthedocs/source/installation/ubuntu.rst
@@ -52,5 +52,5 @@ If there is a new release just execute
 
 .. _PPA Horus: https://launchpad.net/~bqlabs/+archive/ubuntu/horus/
 .. _PPA Horus dev: https://launchpad.net/~bqlabs/+archive/ubuntu/horus-dev/
-.. _custom OpenCV: https://github.com/bqlabs/opencv
-.. _reasons: https://github.com/bqlabs/opencv/wiki
+.. _custom OpenCV: https://github.com/LibreScanner/opencv
+.. _reasons: https://github.com/LibreScanner/opencv/wiki
diff --git a/doc/readthedocs/source/installation/windows.rst b/doc/readthedocs/source/installation/windows.rst
index 11cb0d7f..4f6e1ab0 100644
--- a/doc/readthedocs/source/installation/windows.rst
+++ b/doc/readthedocs/source/installation/windows.rst
@@ -36,4 +36,4 @@ Reboot the computer to apply the changes.
    4. *Apply* and close the window.
 
 .. _Logitech Camera C270 Drivers: http://support.logitech.com/en_us/product/hd-webcam-c270
-.. _Horus installer: https://github.com/bqlabs/horus/releases/download/0.2rc1/Horus_0.2rc1.exe
+.. _Horus installer: https://github.com/LibreScanner/horus/releases/download/0.2rc1/Horus_0.2rc1.exe
diff --git a/doc/readthedocs/source/scanner-components/board.rst b/doc/readthedocs/source/scanner-components/board.rst
index 53dad3ed..b5a11bcf 100644
--- a/doc/readthedocs/source/scanner-components/board.rst
+++ b/doc/readthedocs/source/scanner-components/board.rst
@@ -22,7 +22,7 @@ ZUM SCAN Shield
 Horus Firmware
 --------------
 
-The firmware is an adaptation of Grbl. Source code is here: https://github.com/bqlabs/horus-fw.
+The firmware is an adaptation of Grbl. Source code is here: https://github.com/LibreScanner/horus-fw.
 
 It can be uploaded in **Preferences > Upload firmware**.
 
diff --git a/doc/readthedocs/source/scanner-components/camera.rst b/doc/readthedocs/source/scanner-components/camera.rst
index 3f22a137..7fcf4960 100644
--- a/doc/readthedocs/source/scanner-components/camera.rst
+++ b/doc/readthedocs/source/scanner-components/camera.rst
@@ -163,6 +163,6 @@ Focus image
    In this `video`_ the camera manual focus is explained.
 
 
-.. _custom OpenCV: https://github.com/bqlabs/opencv
-.. _reasons: https://github.com/bqlabs/opencv/wiki
+.. _custom OpenCV: https://github.com/LibreScanner/opencv
+.. _reasons: https://github.com/LibreScanner/opencv/wiki
 .. _video: https://www.youtube.com/watch?v=v-gYgBeiOVI
diff --git a/setup.py b/setup.py
index 081ba21c..fe40baee 100644
--- a/setup.py
+++ b/setup.py
@@ -31,7 +31,7 @@ def package_data_dirs(source, basedir='/usr/share/horus'):
 
     license='GPLv2',
     keywords="horus ciclop scanning 3d",
-    url='https://github.com/bqlabs/horus',
+    url='https://github.com/LibreScanner/horus',
 
     packages=find_packages('src'),
     package_dir={'': 'src'},
diff --git a/src/horus/gui/main.py b/src/horus/gui/main.py
index 953b2c18..ff96ffd7 100644
--- a/src/horus/gui/main.py
+++ b/src/horus/gui/main.py
@@ -181,7 +181,7 @@ def load_menu(self):
         if profile.settings['check_for_updates']:
             self.Bind(wx.EVT_MENU, self.on_updates, self.menu_updates)
         self.Bind(wx.EVT_MENU, lambda e: webbrowser.open(
-            'https://github.com/bqlabs/horus'), self.menu_sources)
+            'https://github.com/LibreScanner/horus'), self.menu_sources)
 
     def on_launch_wizard(self, event):
         self.workbench[profile.settings['workbench']].on_close()