rs4853v3

\mainpage Main Page

---

RS485 3V3 Click

RS485 Click 3.3V is a RS422/485 transceiver Click board™, which can be used as an interface between the TTL level UART and the RS422/485 communication bus. It features a half-duplex communication capability, bus Idle, open and short-circuit detection, glitch free power-up and power-down for hot-plugging applications, thermal shutdown, and more. It is well suited for transmitting data packets over long distances and noisy areas, using the twisted wire bus, which offers good electromagnetic interferences (EMI) immunity. ESD protection of the transceiver IC ensures reliable operation, exceeding 16kV for human body model (HBM).

Click Product page

---

Click library

• Author : Stefan Ilic
• Date : Jun 2021.
• Type : UART type

Software Support

We provide a library for the RS4853V3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for RS4853V3 Click driver.

Standard key functions :

• rs4853v3_cfg_setup Config Object Initialization function.

void rs4853v3_cfg_setup ( rs4853v3_cfg_t *cfg );

• rs4853v3_init Initialization function.

err_t rs4853v3_init ( rs4853v3_t *ctx, rs4853v3_cfg_t *cfg );

Example key functions :

• rs4853v3_generic_read This function reads a desired number of data bytes by using UART serial interface.

err_t rs4853v3_generic_read ( rs4853v3_t *ctx, char *data_buf, uint16_t max_len );

• rs4853v3_send_command This function sends a command by using UART serial interface.

void rs4853v3_send_command ( rs4853v3_t *ctx, char *command );

Example Description

This example reads and processes data from RS485 3V3 clicks.

The demo application is composed of two sections :

Application Init

Initializes driver and wake-up module.

void application_init ( void ) {
    log_cfg_t log_cfg;
    rs4853v3_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );

    //  Click initialization.

    rs4853v3_cfg_setup( &cfg );
    RS4853V3_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    rs4853v3_init( &rs4853v3, &cfg );
    log_info( &logger, " Application Task " );
    Delay_ms ( 100 );
    
#ifdef DEMO_APP_TRANSMITTER
    log_printf( &logger, "------------------\r\n" );
    log_printf( &logger, "    Send data:    \r\n" );
    log_printf( &logger, "      MikroE      \r\n" );
    log_printf( &logger, "------------------\r\n" );
    log_printf( &logger, "  Transmit data   \r\n" );
    Delay_ms ( 1000 );

#endif
    
#ifdef DEMO_APP_RECEIVER 
    log_printf( &logger, "------------------\r\n" );

    log_printf( &logger, "   Receive data  \r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
#endif
        
    log_printf( &logger, "------------------\r\n" );
}

Application Task

Reads the received data and parses it.

void application_task ( void ) {  
#ifdef DEMO_APP_RECEIVER 
    rs4853v3_process( );
    if ( current_rsp_buf > 0 ) {
        log_printf( &logger, "%s", current_rsp_buf );
        rs4853v3_clear_current_rsp_buf( );
    }
#endif 

#ifdef DEMO_APP_TRANSMITTER
    rs4853v3_send_command( &rs4853v3, &demo_message[ 0 ] );
    log_printf( &logger, "\t%s",  &demo_message[ 0 ] );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    log_printf( &logger, "------------------\r\n" ); 
#endif   
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.RS4853V3

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---