From a81ec642ab393624ddb5d3a3e12125df8e76dc7c Mon Sep 17 00:00:00 2001 From: tyneises Date: Thu, 5 Dec 2024 11:13:40 -0600 Subject: [PATCH] update tests results after IPH default updates --- test_results_win64.csv | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/test_results_win64.csv b/test_results_win64.csv index e35f24a19..f10743de3 100644 --- a/test_results_win64.csv +++ b/test_results_win64.csv @@ -107,14 +107,14 @@ Generic CSP System,LCOE Calculator,592360448,NA,NA,; Notice: time 0.00 { Generic Generic CSP System,None,592360448,NA,NA,; Notice: time 0.00 { Generic solar model 2 }:\ The interpolation code must be 1 (interpolate) or 2 (nearest neighbor)The input value was 0, so it was reset to 1 MSPT IPH,None,1496956800,NA,NA,; MSPT IPH,LCOH Calculator,1496956800,NA,NA,; -MSPT IPH,Single Owner,1550245888,6.95685,10.2901,; Warning: IRR at end of analysis period is 50.0639%. A high IRR may indicate a project with unrealistically high returns. Warning: IRR in target year is 50.0514%. A high IRR may indicate a project with unrealistically high returns. +MSPT IPH,Single Owner,1550245888,6.26452,6.83681,; Physical Trough IPH,None,22067516,NA,NA,; Physical Trough IPH,LCOH Calculator,22067516,NA,NA,; -Physical Trough IPH,Single Owner,22067516,5.41321,3.69557,; -Physical Trough IPH,Commercial,22067516,3.15625,NA,; +Physical Trough IPH,Single Owner,22067516,6.75611,5.54336,; +Physical Trough IPH,Commercial,22067516,4.66723,NA,; DSGL IPH,None,10833103,NA,NA,; DSGL IPH,LCOH Calculator,10833103,NA,NA,; -DSGL IPH,Single Owner,10833103,14.1036,18.6686,; +DSGL IPH,Single Owner,10833103,5.44917,7.02159,; MSLF IPH,None,16481964,NA,NA,; Notice: Piping geometry file\ \ Maximum fluid velocity: 3.00\ Minimum fluid velocity: 2.00\ \ To section 1 header pipe diameter: 0.0626 m (2.46 in)\ Loop No. | Diameter [m] | Diameter [in] | Diam. ID\ --------------------------------------------------\ 1 | 0.0626 | 2.4646 | 1\ Notice: At time = 2007 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle mass flow rate only reached a convergence = 0.00199778. Check that results at this timestep are not unreasonably biasing total simulation results Notice: At time = 3829 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle mass flow rate only reached a convergence = -0.00223821. Check that results at this timestep are not unreasonably biasing total simulation results Notice: At time = 3829 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle heat input only reached a convergence = -0.00490909. Check that results at this timestep are not unreasonably biasing total simulation results MSLF IPH,LCOH Calculator,16481964,NA,NA,; Notice: Piping geometry file\ \ Maximum fluid velocity: 3.00\ Minimum fluid velocity: 2.00\ \ To section 1 header pipe diameter: 0.0626 m (2.46 in)\ Loop No. | Diameter [m] | Diameter [in] | Diam. ID\ --------------------------------------------------\ 1 | 0.0626 | 2.4646 | 1\ Notice: At time = 2007 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle mass flow rate only reached a convergence = 0.00199778. Check that results at this timestep are not unreasonably biasing total simulation results Notice: At time = 3829 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle mass flow rate only reached a convergence = -0.00223821. Check that results at this timestep are not unreasonably biasing total simulation results Notice: At time = 3829 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle heat input only reached a convergence = -0.00490909. Check that results at this timestep are not unreasonably biasing total simulation results MSLF IPH,Single Owner,16481964,6.94588,7.7607,; Notice: Piping geometry file\ \ Maximum fluid velocity: 3.00\ Minimum fluid velocity: 2.00\ \ To section 1 header pipe diameter: 0.0626 m (2.46 in)\ Loop No. | Diameter [m] | Diameter [in] | Diam. ID\ --------------------------------------------------\ 1 | 0.0626 | 2.4646 | 1\ Notice: At time = 2007 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle mass flow rate only reached a convergence = 0.00199778. Check that results at this timestep are not unreasonably biasing total simulation results Notice: At time = 3829 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle mass flow rate only reached a convergence = -0.00223821. Check that results at this timestep are not unreasonably biasing total simulation results Notice: At time = 3829 CR_DF__PC_MAX__TES_FULL__AUX_OFF iteration to find a defocus resulting in the maximum power cycle heat input only reached a convergence = -0.00490909. Check that results at this timestep are not unreasonably biasing total simulation results