prj.conf

#
# Copyright (c) 2024 Olivier DEBON
# SPDX-License-Identifier: AGPL-3.0-or-later
#

CONFIG_NCS_SAMPLES_DEFAULTS=y

# Do not use external 32768Hz xtal
CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=n

CONFIG_PROBE_INTERVAL=60

# LOG configuration
CONFIG_LOG_MODE_DEFERRED=y
CONFIG_LOG_BUFFER_SIZE=4096
CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=1024
CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=1000

# Configure serial
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_SERIAL=y
CONFIG_GPIO=y

# Config Analog Digital Converter
CONFIG_ADC=y

# Make sure printk is not printing to the UART console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_HEAP_MEM_POOL_SIZE=2048
CONFIG_MAIN_THREAD_PRIORITY=7

CONFIG_ZIGBEE=y
CONFIG_ZIGBEE_APP_UTILS=y
CONFIG_ZIGBEE_ROLE_END_DEVICE=y
CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y

# Enable DK LED and Buttons library
CONFIG_DK_LIBRARY=y

# This example requires more workqueue stack
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Enable nRF ECB driver
CONFIG_CRYPTO=y
CONFIG_CRYPTO_NRF_ECB=y
CONFIG_CRYPTO_INIT_PRIORITY=80

# Networking
CONFIG_NET_IPV6=n
CONFIG_NET_IP_ADDR_CHECK=n
CONFIG_NET_UDP=n

# Enable this to duplicate Zephyr logs to default Logger serial backend,
# usually connected to on-board JLink device.
# CONFIG_LOG_BACKEND_UART=y