2023-04-28-00_14_24.log

+ source common/common_pcp.sh
++ source /root/mugen/libs/locallibs/common_lib.sh
+++ python3 --version
+++ '[' 0 -eq 0 ']'
+++ source /root/mugen/libs/locallibs/common_lib_python.sh
+ main
++ type -t post_test
+ '[' -n function ']'
+ trap post_test EXIT INT HUP TERM
+ grep expect
+ rpm -qa
++ type -t config_params
+ '[' -n '' ']'
++ type -t pre_test
+ '[' -n function ']'
+ pre_test
+ LOG_INFO 'Start to prepare the test environment.'
+ message='Start to prepare the test environment.'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level info --message 'Start to prepare the test environment.'
Fri Apr 28 00:14:28 2023 - INFO  - Start to prepare the test environment.
+ deploy_env
+ DNF_INSTALL pcp
+ pkgs=pcp
+ node=1
+ '[' -z '' ']'
+ tmpfile=
++ python3 /root/mugen/libs/locallibs/rpm_manage.py install --pkgs pcp --node 1 --tempfile ''
+ tmpfile2=/tmp/tmpp8ip5kbl
+ '[' -z '' ']'
+ tmpfile=/tmp/tmpp8ip5kbl
+ systemctl enable pmcd
Created symlink /etc/systemd/system/multi-user.target.wants/pmcd.service → /usr/lib/systemd/system/pmcd.service.
+ systemctl start pmcd
+ systemctl enable pmlogger
Created symlink /etc/systemd/system/multi-user.target.wants/pmlogger.service → /usr/lib/systemd/system/pmlogger.service.
+ systemctl start pmlogger
+ SLEEP_WAIT 10
+ wait_time=10
+ cmd=
+ mode=1
+ python3 /root/mugen/libs/locallibs/sleep_wait.py --time 10 --cmd '' --mode 1
++ hostname
+ host_name=openeuler-riscv64
++ rpm -qa pcp
++ awk -F - '{print $2}'
+ pcp_version=5.3.7
++ awk -F: '{print $NF}'
++ pcp -h openeuler-riscv64
++ grep 'primary logger:'
+ archive_data=' /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16'
+ metric_name=disk.dev.write
+ LOG_INFO 'End to prepare the test environment.'
+ message='End to prepare the test environment.'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level info --message 'End to prepare the test environment.'
Fri Apr 28 00:16:36 2023 - INFO  - End to prepare the test environment.
++ type -t run_test
+ '[' -n function ']'
+ run_test
+ LOG_INFO 'Start to run test.'
+ message='Start to run test.'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level info --message 'Start to run test.'
Fri Apr 28 00:16:37 2023 - INFO  - Start to run test.
+ pmevent -L -s 10 disk.dev.write
+ grep interval
interval:  1.00 sec
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent --container=busybox vfs.inodes.count -s 10
+ grep metric

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found

pmevent: pmFetch: Container not found
metric:    vfs.inodes.count
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent --derived=/var/lib/pcp/config/pmieconf/dm -s 10 disk.dev.write
+ grep metric
pmevent: pmLoadDerivedConfig failed: No such file or directory
Usage: pmevent [options] metricname

General options:
  -A TIME, --align=TIME align sample times on natural boundaries
  -a FILE, --archive=FILE
                        metrics source is a PCP log archive
  -g, --guimode         start in GUI mode with new time control
  -h HOST, --host=HOST  metrics source is PMCD on host
  -n FILE, --namespace=FILE
                        use an alternative PMNS
  -O TIME, --origin=TIME
                        initial sample time within the time window
  -p N, --guiport=N     port for connection to existing time control
  -S TIME, --start=TIME start of the time window
  -s N, --samples=N     terminate after this many samples
  -T TIME, --finish=TIME
                        end of the time window
  -t DELTA, --interval=DELTA
                        sampling interval
  -Z TZ, --timezone=TZ  set reporting timezone
  -z, --hostzone        set reporting timezone to local time of metrics source
  -V, --version         display version number and exit
  -?, --help            show this usage message and exit
  -K SPEC, --spec-local=SPEC
                        optional additional PMDA spec for local connection
  -L, --local-PMDA      metrics source is local connection to a PMDA
  --container=NAME      specify an individual container to be queried
  --derived=FILE        load derived metric definitions from FILE(s)

Reporting options:
  -d, --delay           delay, pause between updates for archive replay
  -f N, --precision=N   fixed output format with N digits precision
  -i INST, --instances=INST
                        comma-separated metrics instance list
  -r, --raw             output raw counter values (no rate conversion)
  -U FILE, --nointerp=FILE
                        non-interpolated fetching; ignores interval
  -v, --verbose         increase diagnostic output
  -w N, --width=N       set the width of each column of output
  -x VALUE, --filter=VALUE
                        store to the metric before fetching (filter)
  -X, --timestamp       include date and microseconds in reported timestamps
+ CHECK_RESULT 1
+ actual_result=1
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 1 ']'
+ '[' 0 -eq 0 ']'
+ test 1x '!=' 0x
+ test -n ''
+ (( exec_result++ ))
+ LOG_ERROR 'oe_test_pmevent_02.sh line 36'
+ message='oe_test_pmevent_02.sh line 36'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level error --message 'oe_test_pmevent_02.sh line 36'
Fri Apr 28 00:16:59 2023 - ERROR - oe_test_pmevent_02.sh line 36
+ '[' 0 -eq 1 ']'
+ return 0
+ pmevent -a /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16 -d -s 10 disk.dev.write
+ grep metric
metric:    disk.dev.write
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent -a /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16 -f 3 -s 10 disk.dev.write
+ grep metric
metric:    disk.dev.write
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent -a /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16 -i '' -s 10 disk.dev.write
+ grep metric
metric:    disk.dev.write
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent -a /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16 -r -s 10 disk.dev.write
+ grep metric
metric:    disk.dev.write
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent -a /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16 -v -s 10 disk.dev.write
+ grep metric
metric:    disk.dev.write
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent -a /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16 -w 3 -s 10 disk.dev.write
+ grep metric
metric:    disk.dev.write
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ pmevent -a /var/log/pcp/pmlogger/openeuler-riscv64/20230428.00.16 -x 50 -s 10 disk.dev.write
+ grep metric
metric:    disk.dev.write
+ CHECK_RESULT 0
+ actual_result=0
+ expect_result=0
+ mode=0
+ error_log=
+ exit_mode=0
+ '[' -z 0 ']'
+ '[' 0 -eq 0 ']'
+ test 0x '!=' 0x
+ return 0
+ LOG_INFO 'End to run test.'
+ message='End to run test.'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level info --message 'End to run test.'
Fri Apr 28 00:17:11 2023 - INFO  - End to run test.
+ CASE_RESULT 0
+ case_re=0
+ test -z 1
+ test 1 -gt 0
+ LOG_ERROR 'failed to execute the case.'
+ message='failed to execute the case.'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level error --message 'failed to execute the case.'
Fri Apr 28 00:17:12 2023 - ERROR - failed to execute the case.
+ exit 1
+ post_test
+ LOG_INFO 'Start to restore the test environment.'
+ message='Start to restore the test environment.'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level info --message 'Start to restore the test environment.'
Fri Apr 28 00:17:13 2023 - INFO  - Start to restore the test environment.
+ DNF_REMOVE
+ node=1
+ pkg_list=
+ mode=0
+ [[ -z /tmp/tmpp8ip5kbl ]]
+ '[' 0 -ne 0 ']'
+ '[' 1 == 0 ']'
+ python3 /root/mugen/libs/locallibs/rpm_manage.py remove --node 1 --pkgs '' --tempfile /tmp/tmpp8ip5kbl
+ '[' 0 -ne 0 ']'
+ LOG_INFO 'End to restore the test environment.'
+ message='End to restore the test environment.'
+ python3 /root/mugen/libs/locallibs/mugen_log.py --level info --message 'End to restore the test environment.'
Fri Apr 28 00:18:03 2023 - INFO  - End to restore the test environment.