D2_99_SYBASE.tpw

#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#! File Name:   D2SYBASE.tpw
#! Purpose:     DCT to SYBASE creation script
#! Author:      Copyright © 1999-2999 by Roberto Artigas Jr
#!              All rights reserved world wide.
#! Changes:
#! 2002.12.02   Roberto Artigas Jr
#!  *   Created skeleton for the Sybase variant.
#!---------------------------------------------------------------------
#UTILITY(Dct2SYBASE, '2016.02.17: Dictionary to SYBASE script')
#!---------------------------------------------------------------------
#BOXED('Hidden Variables'),HIDE
  #PROMPT('DictName: '    ,@S40 ),%DictName
  #PROMPT('DictPath: '    ,@S80 ),%DictPath
  #PROMPT('nLoc1: '       ,@N4  ),%nLoc1
  #PROMPT('nLoc2: '       ,@N4  ),%nLoc2
  #PROMPT('OutTableName: ',@S120),%OutTableName
  #PROMPT('OutGrantName: ',@S120),%OutGrantName
  #PROMPT('OutIndexName: ',@S120),%OutIndexName
  #PROMPT('OutRelatName: ',@S120),%OutRelatName
#ENDBOXED
#!
#SHEET,HSCROLL
 #TAB('General')
  #BOXED('')
   #DISPLAY('The SYBASE Script Creator.')
   #DISPLAY('Copyright 2002-2003 © by Roberto Artigas Jr.')
   #DISPLAY('All Rights Reserved World Wide.')
   #DISPLAY('')
   #PROMPT('Directory:'  ,@S80 ),%SQLDirectory,AT(52,,130)
   #DISPLAY('')
   #PROMPT('Generate CREATE?'   ,CHECK),%SQLTable,DEFAULT(%TRUE),AT(10)
   #PROMPT('CREATE Script:'     ,@S40 ),%SQLTableName,AT(82,,100)
   #DISPLAY('')
   #PROMPT('Generate GRANT? '   ,CHECK),%SQLGrant,DEFAULT(%FALSE),AT(10)
   #PROMPT('GRANT Script:'      ,@S40 ),%SQLGrantName,AT(82,,100)
   #DISPLAY('')
   #PROMPT('Generate KEYS?'     ,CHECK),%SQLIndex,DEFAULT(%TRUE),AT(10)
   #PROMPT('KEYS Script:'       ,@S40 ),%SQLIndexName,AT(82,,100)
   #DISPLAY('')
   #PROMPT('Generate RELATION?' ,CHECK),%SQLRelat,DEFAULT(%TRUE),AT(10)
   #PROMPT('RELATION Script:'   ,@S40 ),%SQLRelatName,AT(82,,100)
  #ENDBOXED
 #ENDTAB
 #TAB('Arrays')
  #BOXED('')
   #DISPLAY('There are two ways to handle arrays:')
   #DISPLAY('')
   #DISPLAY('1) You defined a group with all the fields of the array')
   #DISPLAY('inside this group. Then you put the array OVER the')
   #DISPLAY('group. If you set up your arrays in this manner, then')
   #DISPLAY('LEAVE the checkbox bellow OFF.')
   #DISPLAY('')
   #DISPLAY('2) You define your arrays as actual fields using no')
   #DISPLAY('groups whatsoever. If you set up your arrays this way,')
   #DISPLAY('then TURN ON the checkbox bellow.')
   #DISPLAY('')
   #DISPLAY('')
   #PROMPT('I DO NOT HAVE ARRAYS OVER GROUPS. ',CHECK),%NoArrayOver,AT(10),DEFAULT(0)
   #DISPLAY('')
   #DISPLAY('')
   #DISPLAY('')
   #DISPLAY('')
   #DISPLAY('')
  #ENDBOXED
 #ENDTAB
#! #TAB('Standardize')
#!   #BOXED('')
#!   #PROMPT('Generate script comments? ',CHECK),%DoComments,AT(10),DEFAULT(0)
#!   #PROMPT('Force BOOLEAN validation to [Y,N] choices? ',CHECK),%ForceBoolYN,AT(10),DEFAULT(1)
#!   #PROMPT('Prefix tables and rows with file prefix? ',CHECK),%UsePrefix,AT(10),DEFAULT(0)
#!   #PROMPT('Do KEYFIELD-FILE list to create relations? ',CHECK),%DoFieldFile,AT(10),DEFAULT(0)
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!   #DISPLAY('')
#!  #ENDBOXED
#!  #BOXED('')
#!   #PROMPT('True Value (Y,T,1): ',@S1),%TrueValue,REQ,DEFAULT('Y')
#!   #PROMPT('False Value (N,F,0): ',@S1),%FalseValue,REQ,DEFAULT('N')
#!  #ENDBOXED
#! #ENDTAB
#ENDSHEET
#BOXED('Hidden Variables'),HIDE
  #PROMPT('Generate script comments? ',CHECK),%DoComments,AT(10),DEFAULT(0)
  #PROMPT('Force BOOLEAN validation to [Y,N] choices? ',CHECK),%ForceBoolYN,AT(10),DEFAULT(1)
  #PROMPT('Prefix tables and rows with file prefix? ',CHECK),%UsePrefix,AT(10),DEFAULT(0)
  #PROMPT('Do KEYFIELD-FILE list to create relations? ',CHECK),%DoFieldFile,AT(10),DEFAULT(0)
  #PROMPT('True Value (Y,T,1): ',@S1),%TrueValue,REQ,DEFAULT('Y')
  #PROMPT('False Value (N,F,0): ',@S1),%FalseValue,REQ,DEFAULT('N')
#ENDBOXED
#!---------------------------------------------------------------------
#PREPARE
#!
#SET(%nLoc1,INSTRING('\',%DictionaryFile,1,1))
#LOOP,WHILE(%nLoc1)
  #SET(%nLoc2,%nLoc1)
  #SET(%nLoc1,INSTRING('\',%DictionaryFile,1,%nLoc1+1))
#ENDLOOP
#SET(%DictName,UPPER(SUB(%DictionaryFile,%nLoc2+1,LEN(%DictionaryFile)-%nLoc2-4)))
#SET(%DictPath,UPPER(SUB(%DictionaryFile,1,%nLoc2)))
#!
#SET(%SQLDirectory,%DictPath)
#SET(%SQLTableName,%DictName & '.01_SYSQL')
#SET(%SQLGrantName,%DictName & '.02_SYSQL')
#SET(%SQLIndexName,%DictName & '.03_SYSQL')
#SET(%SQLRelatName,%DictName & '.04_SYSQL')
#!
#ENDPREPARE
#!---------------------------------------------------------------------
#DECLARE(%NFileUser)                    #! File user options [RASQL]
#DECLARE(%NFileOpt1)                    #! File option 1 [NO]
#DECLARE(%NFileOpt2)                    #! File option 2
#DECLARE(%NFileOpt3)                    #! File option 3
#DECLARE(%NFileOpt4)                    #! File option 4
#!
#DECLARE(%NFieldUser)                   #! Field user options [RASQL]
#DECLARE(%NFieldOpt1)                   #! Field option 1 [NO]
#DECLARE(%NFieldOpt2)                   #! Field option 2
#DECLARE(%NFieldOpt3)                   #! Field option 3
#DECLARE(%NFieldOpt4)                   #! Field option 4
#!
#DECLARE(%NKeyUser)                     #! Key user options [RASQL]
#DECLARE(%NKeyOpt1)                     #! Key option 1 [NO]
#DECLARE(%NKeyOpt2)                     #! Key option 2
#DECLARE(%NKeyOpt3)                     #! Key option 3
#DECLARE(%NKeyOpt4)                     #! Key option 4
#!
#DECLARE(%NRelationUser)                #! Relation user options [RASQL]
#DECLARE(%NRelationOpt1)                #! Relation option 1 [NO]
#DECLARE(%NRelationOpt2)                #! Relation option 2
#DECLARE(%NRelationOpt3)                #! Relation option 3
#DECLARE(%NRelationOpt4)                #! Relation option 4
#!
#DECLARE(%NFileName)                    #! File Name
#DECLARE(%NFileType)                    #! TYPE=???
#DECLARE(%NFileRowFormat)               #! ROW_FORMAT=???
#!
#DECLARE(%NFieldPKey)                   #! Field is Primary Key?
#DECLARE(%NFieldLine)                   #! Field line
#DECLARE(%NFieldName)                   #! Field Name
#DECLARE(%NFieldTSql)                   #! Field SQL type
#DECLARE(%NFieldType)                   #! Field type
#DECLARE(%NFieldDef)                    #! Field default
#DECLARE(%NFieldAuto)                   #! Field AUTO_INCREMENT
#DECLARE(%NFieldNN)                     #! Field NOT NULL
#DECLARE(%NFieldSize  ,LONG)            #! Field decimal size
#DECLARE(%NFieldDec   ,LONG)            #! Field decimal places
#DECLARE(%NLeadZero   ,LONG)            #! Have a leading zero
#DECLARE(%NFNameAuto)                   #! Field Name Auto Increment
#!
#DECLARE(%NKeyName)                     #! Key name
#DECLARE(%NKeyFields)                   #! Key building line
#DECLARE(%NKeyField)                    #! Key field current
#DECLARE(%NKeyFieldCount)               #! Number of key fields
#DECLARE(%PrimaryCount)                 #! Primary key exists
#DECLARE(%SecondaryCount)               #! Secondary key exists
#DECLARE(%AutoIncrementCount)           #! Auto-Increment key exists
#!
#DECLARE(%NRelateItem)                  #! Working item number
#DECLARE(%NRelateCount)                 #! Total items to work
#DECLARE(%NRelateComma)                 #! Number of commas
#DECLARE(%NRelateFile)                  #! Related file
#DECLARE(%NRelateField1)                #! Related origin field
#DECLARE(%NRelateField2)                #! Related relate field
#DECLARE(%RelationField1Count)          #! Count of origin file key items
#DECLARE(%RelationField2Count)          #! Count of relate file key items
#DECLARE(%RelationField1)               #! The origin file keys
#DECLARE(%RelationField2)               #! The relate file keys
#DECLARE(%RelationUpdate)               #! ON UPDATE ?
#DECLARE(%RelationDelete)               #! ON DELETE ?
#!
#!#DECLARE(%nLoc1       ,LONG)            #! Location 1
#!#DECLARE(%nLoc2       ,LONG)            #! Location 2
#DECLARE(%TheCount    ,LONG)            #! Count posible relations
#DECLARE(%CStringLen)                   #! Length of types shortened by one
#DECLARE(%LastField)                    #! Last field processed
#DECLARE(%InnerGroup)                   #! Inner group level processed
#DECLARE(%FieldComma)                   #! Number of fields - 1
#!
#DECLARE(%ChoiceLine)                   #! Build ENUM field type line
#DECLARE(%ChoiceComma)                  #! Count ENUM values - 1
#!
#DECLARE(%DocVar)                       #! Documentation Variable
#DECLARE(%TableCount, 0)                #! Count of tables
#DECLARE(%AutoCount, 0)                 #! Count of Auto-Increment Keys
#DECLARE(%PKeyCount, 0)                 #! Count of primary keys (From Keys)
#DECLARE(%PKeyOption, 0)                #! Count of primary keys (From Options)
#DECLARE(%KeyOthers, 0)                 #! Count of secondary keys
#DECLARE(%KeyCount, 0)                  #! Count of all keys combined
#DECLARE(%FieldCount, 0)                #! Count of fields
#DECLARE(%RelCount, 0)                  #! Relationship Counts
#DECLARE(%FieldTable),MULTI,UNIQUE      #! List of unique fields
#DECLARE(%FieldUnique, 0)               #! Count of unique fields
#!
#DECLARE(%TheDate)                      #! Display current date
#DECLARE(%TheTime)                      #! Display current time
#SET(%TheDate,FORMAT(TODAY(),@D010))    #! Set current date
#SET(%TheTime,FORMAT(CLOCK(),@T06))     #! Set current time
#!
#DECLARE (%DimCount   ,LONG)            #! Number of dimensions
#DECLARE (%FldArray   ,STRING)          #! Created field name from array
#DECLARE (%FD1S       ,STRING)          #! Number for dimension 1
#DECLARE (%FD2S       ,STRING)          #! Number for dimension 2
#DECLARE (%FD3S       ,STRING)          #! Number for dimension 3
#DECLARE (%FD4S       ,STRING)          #! Number for dimension 4
#DECLARE (%FD1I       ,LONG)            #! Looping in Dimension 1
#DECLARE (%FD2I       ,LONG)            #! Looping in Dimension 2
#DECLARE (%FD3I       ,LONG)            #! Looping in Dimension 3
#DECLARE (%FD4I       ,LONG)            #! Looping in Dimension 4
#DECLARE (%FD1L       ,LONG)            #! Set to %FieldDimension1
#DECLARE (%FD2L       ,LONG)            #! Set to %FieldDimension2
#DECLARE (%FD3L       ,LONG)            #! Set to %FieldDimension3
#DECLARE (%FD4L       ,LONG)            #! Set to %fieldDimension4
#!--------------------------------------------------------------!
#! List of table, key and rows names found in reserved list.    !
#!--------------------------------------------------------------!
#DECLARE(%ReservedFieldList),MULTI,UNIQUE
#EQUATE (%FoundFileName     ,'File Name:          ')
#EQUATE (%FoundFileField    ,'File Field Name:    ')
#EQUATE (%FoundAIKeyName    ,'AI Key Name:        ')
#EQUATE (%FoundKeyName      ,'Key Name:           ')
#EQUATE (%FoundKeyField     ,'Key Field Name:     ')
#EQUATE (%FoundRelatedName  ,'Related File Name:  ')
#EQUATE (%FoundRelatedField ,'Related Field Name: ')
#!--------------------------------------------------------------------------!
#! RAS.2001.12.15 - Table of field-table to be able to create relations.    !
#!--------------------------------------------------------------------------!
#DECLARE(%FieldTableList),MULTI,UNIQUE
#!---------------------------------------------------------------------
#DECLARE(%LFieldInKey),MULTI,UNIQUE     #! Field list that are used in keys
#DECLARE(%IFieldInKey)                  #! Field item to search for in list
#DECLARE(%LFieldInKeyCount)             #! How many fields are in keys?
#FREE(%LFieldInKey)
#FOR(%File)
  #IF(ITEMS(%Key))
    #FOR(%Key)
      #FOR(%KeyField)
        #ADD(%LFieldInKey,%KeyField)
      #ENDFOR
    #ENDFOR
  #ENDIF
#ENDFOR
#SET(%LFieldInKeyCount,ITEMS(%LFieldInKey))
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#INSERT(%ClarionReservedWords)
#INSERT(%SqlReservedWords)
#FOR(%ClarionWordList)
  #ADD(%SqlWordList,%ClarionWordList)
#ENDFOR
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#SET(%TableCount, 0)                    #! Count of tables
#SET(%AutoCount, 0)                     #! Count of Auto-Increment Keys
#SET(%PKeyCount, 0)                     #! Count of primary keys (From Keys)
#SET(%PKeyOption, 0)                    #! Count of primary keys (From Options)
#SET(%KeyOthers, 0)                     #! Count of secondary keys
#SET(%KeyCount, 0)                      #! Count of all keys combined
#SET(%FieldCount, 0)                    #! Count of fields
#SET(%RelCount, 0)                      #! Relationship Counts
#SET(%FieldUnique, 0)                   #! Count of unique fields
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#IF(%SQLTable)
  #SET(%OutTableName,%SQLDirectory & %SQLTableName)
  #CREATE(%OutTableName)
  #MESSAGE('The SYBASE Script Creator',0)
  #MESSAGE('Creating: ' & %SQLTableName,1)
--
-- BOF: %OutTableName
--
-- SQL script creator for SYBASE database [TABLE]
-- Created: %TheDate - %TheTime
--

#FOR(%File)
  #!----------------------------------------------------------------!
  #! RAS.2001.12.01 - Ignore file place marker definitions.         !
  #! These are files that are defined but that contain no fields.   !
  #!----------------------------------------------------------------!
  #IF(NOT ITEMS(%Field))                                        #! RAS.2001.12.01
    #CYCLE                                                      #! RAS.2001.12.01
  #ENDIF                                                        #! RAS.2001.12.01
  #SET(%nLoc1,INSTRING('RASQL(',%FileUserOptions,1,1))
  #SET(%nLoc2,INSTRING(')',%FileUserOptions,1,%nLoc1))
  #SET(%nFileUser,UPPER(SUB(%FileUserOptions,%nLoc1,%nLoc2)))
  #!SET(%NFileUser,UPPER(EXTRACT(%FileUserOptions,'RASQL')))
  #SET(%NFileOpt1,EXTRACT(%NFileUser,'RASQL',1))
  #SET(%NFileOpt2,EXTRACT(%NFileUser,'RASQL',2))
  #SET(%NFileOpt3,EXTRACT(%NFileUser,'RASQL',3))
  #SET(%NFileOpt4,EXTRACT(%NFileUser,'RASQL',4))
  #!-------------------------------------------------------------!
  #! The first option RASQL(NO) controls if a file is processed. !
  #!-------------------------------------------------------------!
  #IF(SUB(%NFileOpt1,1,1)='N')
    #CYCLE
  #ENDIF
#!
  #CASE(%FileType)
  #OF  ('VIEW')
  #OROF('ALIAS')
      #CYCLE
  #ENDCASE
#!
  #CASE(%FileDriver)
    #OF('ASCII')
  #OROF('BASIC')
  #OROF('DOS')
      #CYCLE
  #ENDCASE
#!
  #MESSAGE('Table of: ' & %File,2)
  #SET(%NFieldPKey,UPPER(%FilePrefix) & '_PK')
#!
  #SET(%NFileName,%File)
  #IF(%UsePrefix)
    #SET(%NFileName,%FilePrefix & '_' & %File)
  #ENDIF
  #SET(%SqlWordItem, UPPER(%NFileName))
  #FIND(%SqlWordList, %SqlWordItem)
  #IF(%SqlWordList)
    #ADD(%ReservedFieldList, %FoundFileName & %NFileName)
    #SET(%NFileName, %NFileName & '_')
  #ENDIF
#!
  #!------------------------------------------------------------------------!
  #! IF it IS a primary key, AND it is an integer, AND NOT auto-increment,  !
  #! AND there is one item in the key (only thing I can be sure about),     !
  #! THEN assume that it IS an auto-increment handled by the SQL backend.   !
  #!------------------------------------------------------------------------!
  #SET(%NFNameAuto,'')
  #SET(%AutoIncrementCount,0)
  #IF(ITEMS(%Key))
    #FOR(%Key)
#!---- Key        = %Key
      #IF(%KeyPrimary <> 1)
        #CYCLE
      #ENDIF
#!---- KeyPrimary = %KeyPrimary
      #IF(%KeyAuto = 1)
        #CYCLE
      #ENDIF
#!---- KeyAuto    = %KeyAuto
#!
      #IF(ITEMS(%KeyField) > 1)
        #CYCLE
      #ENDIF
#!
      #FOR(%KeyField)
#!---- KeyField   = %KeyField
        #FIX(%Field,%KeyField)
#!---- Field      = %Field
#!---- FieldType  = %FieldType
        #CASE(%FieldType)
        #OF('LONG')
          #SET(%NFNameAuto, SUB(%KeyField, INSTRING(':',%KeyField,1,1) + 1 , 50))
        #ENDCASE
      #ENDFOR
#!
      #IF(%NFNameAuto)
#!---- NFNameAuto = %NFNameAuto
        #SET(%AutoIncrementCount,%AutoIncrementCount + 1)
        #SET(%AutoCount, %AutoCount + 1)
#!        #SET(%NFNameAuto, SUB(%KeyAuto, INSTRING(':',%KeyAuto,1,1) + 1 , 50))
        #IF(%UsePrefix)
          #SET(%NFNameAuto, %FilePrefix & '_' & %NFNameAuto)
        #ENDIF
        #SET(%SqlWordItem, UPPER(%NFNameAuto))
        #FIND(%SqlWordList, %SqlWordItem)
        #IF(%SqlWordList)
          #ADD(%ReservedFieldList, %FoundAIKeyName & %FilePrefix & ':' & %NFNameAuto)
          #SET(%NFNameAuto, %NFNameAuto & '_')
        #ENDIF
      #ENDIF
    #ENDFOR
    #IF(%AutoIncrementCount = 0)
#!-- WARNING: %File(%FilePrefix) has no AUTO-INCREMENT KEY defined.
    #ENDIF
  #ENDIF
#!
#!PRINT '%NFileName'
CREATE TABLE %NFileName (
#INSERT(%SYSqlField)                                            #! Process fields
)
;

#ENDFOR
--
-- EOF: %OutTableName
--
  #CLOSE(%OutTableName)
#ENDIF
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#IF(%SQLGrant)
  #SET(%OutGrantName,%SQLDirectory & %SQLGrantName)
  #CREATE(%OutGrantName)
  #MESSAGE('The SYBASE Script Creator',0)
  #MESSAGE('Creating: ' & %SQLGrantName,1)
--
-- BOF: %OutGrantName
--
-- SQL script creator for SYBASE database [GRANT]
-- Created: %TheDate - %TheTime
--

#FOR(%File)
  #!----------------------------------------------------------------!
  #! RAS.2001.12.01 - Ignore file place marker definitions.         !
  #! These are files that are defined but that contain no fields.   !
  #!----------------------------------------------------------------!
  #IF(NOT ITEMS(%Field))                                        #! RAS.2001.12.01
    #CYCLE                                                      #! RAS.2001.12.01
  #ENDIF                                                        #! RAS.2001.12.01
  #SET(%nLoc1,INSTRING('RASQL(',%FileUserOptions,1,1))
  #SET(%nLoc2,INSTRING(')',%FileUserOptions,1,%nLoc1))
  #SET(%nFileUser,UPPER(SUB(%FileUserOptions,%nLoc1,%nLoc2)))
  #!SET(%NFileUser,UPPER(EXTRACT(%FileUserOptions,'RASQL')))
  #SET(%NFileOpt1,EXTRACT(%NFileUser,'RASQL',1))
  #SET(%NFileOpt2,EXTRACT(%NFileUser,'RASQL',2))
  #SET(%NFileOpt3,EXTRACT(%NFileUser,'RASQL',3))
  #SET(%NFileOpt4,EXTRACT(%NFileUser,'RASQL',4))
  #!-------------------------------------------------------------!
  #! The first option RASQL(NO) controls if a file is processed. !
  #!-------------------------------------------------------------!
  #IF(SUB(%NFileOpt1,1,1)='N')
    #CYCLE
  #ENDIF
#!
  #CASE(%FileType)
  #OF  ('VIEW')
  #OROF('ALIAS')
      #CYCLE
  #ENDCASE
#!
  #CASE(%FileDriver)
    #OF('ASCII')
  #OROF('BASIC')
  #OROF('DOS')
      #CYCLE
  #ENDCASE
#!
  #MESSAGE('Table of: ' & %File,2)
  #SET(%NFieldPKey,UPPER(%FilePrefix) & '_PK')
#!
  #SET(%NFileName,%File)
  #IF(%UsePrefix)
    #SET(%NFileName,%FilePrefix & '_' & %File)
  #ENDIF
  #SET(%SqlWordItem, UPPER(%NFileName))
  #FIND(%SqlWordList, %SqlWordItem)
  #IF(%SqlWordList)
    #ADD(%ReservedFieldList, %FoundFileName & %NFileName)
    #SET(%NFileName, %NFileName & '_')
  #ENDIF
#!
GRANT SELECT, INSERT, DELETE, UPDATE ON %NFileName
   TO PUBLIC
;

#ENDFOR
--
-- EOF: %OutGrantName
--
  #CLOSE(%OutGrantName)
#ENDIF
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#IF(%SQLIndex)
  #SET(%OutIndexName,%SQLDirectory & %SQLIndexName)
  #CREATE(%OutIndexName)
  #MESSAGE('The SYBASE Script Creator',0)
  #MESSAGE('Creating: ' & %SQLIndexName,1)
--
-- BOF: %OutIndexName
--
-- SQL script creator for SYBASE database [KEYS]
-- Created: %TheDate - %TheTime
--

#FOR(%File)
  #!----------------------------------------------------------------!
  #! RAS.2001.12.01 - Ignore file place marker definitions.         !
  #! These are files that are defined but that contain no fields.   !
  #!----------------------------------------------------------------!
  #IF(NOT ITEMS(%Field))                                        #! RAS.2001.12.01
    #CYCLE                                                      #! RAS.2001.12.01
  #ENDIF                                                        #! RAS.2001.12.01
  #SET(%nLoc1,INSTRING('RASQL(',%FileUserOptions,1,1))
  #SET(%nLoc2,INSTRING(')',%FileUserOptions,1,%nLoc1))
  #SET(%nFileUser,UPPER(SUB(%FileUserOptions,%nLoc1,%nLoc2)))
  #!SET(%NFileUser,UPPER(EXTRACT(%FileUserOptions,'RASQL')))
  #SET(%NFileOpt1,EXTRACT(%NFileUser,'RASQL',1))
  #SET(%NFileOpt2,EXTRACT(%NFileUser,'RASQL',2))
  #SET(%NFileOpt3,EXTRACT(%NFileUser,'RASQL',3))
  #SET(%NFileOpt4,EXTRACT(%NFileUser,'RASQL',4))
  #!-------------------------------------------------------------!
  #! The first option RASQL(NO) controls if a file is processed. !
  #!-------------------------------------------------------------!
  #IF(SUB(%NFileOpt1,1,1)='N')
    #CYCLE
  #ENDIF
#!
  #CASE(%FileType)
  #OF  ('VIEW')
  #OROF('ALIAS')
      #CYCLE
  #ENDCASE
#!
  #CASE(%FileDriver)
    #OF('ASCII')
  #OROF('BASIC')
  #OROF('DOS')
      #CYCLE
  #ENDCASE
#!
  #MESSAGE('Table of: ' & %File,2)
  #SET(%NFieldPKey,UPPER(%FilePrefix) & '_PK')
#!
  #SET(%NFileName,%File)
  #IF(%UsePrefix)
    #SET(%NFileName,%FilePrefix & '_' & %File)
  #ENDIF
  #SET(%SqlWordItem, UPPER(%NFileName))
  #FIND(%SqlWordList, %SqlWordItem)
  #IF(%SqlWordList)
    #ADD(%ReservedFieldList, %FoundFileName & %NFileName)
    #SET(%NFileName, %NFileName & '_')
  #ENDIF
#!
#!PRINT '%NFileName'
  #SET(%PrimaryCount,0)                                         #! Primary key exists
  #SET(%SecondaryCount,0)                                       #! Secondary key exists
  #IF(ITEMS(%Key))
    #FOR(%Key)
      #IF(NOT ITEMS(%KeyField))                                 #! Key has fields? No!
        #CYCLE                                                  #! Then go to the next
      #ENDIF                                                    #! key to be processed
#!
      #SET(%nLoc1,INSTRING('RASQL(',%KeyUserOptions,1,1))
      #SET(%nLoc2,INSTRING(')',%KeyUserOptions,1,%nLoc1))
      #SET(%nKeyUser,UPPER(SUB(%KeyUserOptions,%nLoc1,%nLoc2)))
      #!SET(%NKeyUser,UPPER(EXTRACT(%KeyUserOptions,'RASQL')))
      #SET(%NKeyOpt1,EXTRACT(%NKeyUser,'RASQL',1))
      #SET(%NKeyOpt2,EXTRACT(%NKeyUser,'RASQL',2))
      #SET(%NKeyOpt3,EXTRACT(%NKeyUser,'RASQL',3))
      #SET(%NKeyOpt4,EXTRACT(%NKeyUser,'RASQL',4))
#!%NKeyUser, %NKeyOpt1, %NKeyOpt2, %NKeyOpt3, %NKeyOpt4
      #!------------------------------------------------------------!
      #! The first option RASQL(NO) controls if a key is processed. !
      #!------------------------------------------------------------!
      #IF(SUB(%NKeyOpt1,1,1)='N')
        #CYCLE
      #ENDIF
#!
      #SET(%NKeyName,%KeyID)
      #IF(%UsePrefix)
        #SET(%NKeyName,%FilePrefix & '_' & %KeyID)
      #ENDIF
      #SET(%SqlWordItem, UPPER(%NKeyName))
      #FIND(%SqlWordList, %SqlWordItem)
      #IF(%SqlWordList)
        #ADD(%ReservedFieldList, %FoundKeyName & %FilePrefix & ':' & %NKeyName)
        #SET(%NKeyName, %NKeyName & '_')
      #ENDIF
#!
      #SET(%NKeyFields,'')
      #SET(%NKeyFieldCount,0)
      #FOR(%KeyField)
        #SET(%NKeyField, SUB(%KeyField, INSTRING(':',%KeyField,1,1) + 1 , 50))
        #!--------------------------------------------------------------------------!
        #! RAS.2001.12.15 - Table of keyfield-table to be able to create relations. !
        #!--------------------------------------------------------------------------!
        #IF(%DoFieldFile)
          #ADD(%FieldTableList, %NKeyField & ' ==> ' & %File)
        #ENDIF
        #!
        #IF(%UsePrefix)
          #SET(%NKeyField, %FilePrefix & '_' & %NKeyField)
        #ENDIF
        #SET(%SqlWordItem, UPPER(%NKeyField))
#!-- SqlWordItem = '%SqlWordItem'
        #FIND(%SqlWordList, %SqlWordItem)
#!-- SqlWordList = '%SqlWordList'
        #IF(%SqlWordList)
          #ADD(%ReservedFieldList, %FoundKeyField & %FilePrefix & ':' & %NKeyField)
          #SET(%NKeyField, %NKeyField & '_')
        #ENDIF
        #SET(%NKeyFieldCount,%NKeyFieldCount + 1 )
        #IF(%NKeyFieldCount = 1)
          #SET(%NKeyFields,%NKeyField)
        #ELSE
          #SET(%NKeyFields, %NKeyFields & ', ' & %NKeyField)
        #ENDIF
      #ENDFOR
      #IF(%KeyPrimary)
        #SET(%PrimaryCount, 1)
        #SET(%PKeyCount, %PKeyCount + 1)
        #SET(%KeyCount, %KeyCount + 1)
ALTER TABLE %NFileName
  ADD CONSTRAINT %NKeyName PRIMARY KEY (%NKeyFields)
;

      #ELSIF(NOT %KeyPrimary)
        #SET(%KeyOthers, %KeyOthers + 1)
        #SET(%KeyCount, %KeyCount + 1)
        #IF(%KeyDuplicate)
          #CASE(%KeyIndex)
          #OF  ('KEY')
ALTER TABLE %NFileName
  ADD CONSTRAINT %NKeyName INDEX (%NKeyFields)
;

          #OF  ('INDEX')
          #OROF('DYNAMIC')
ALTER TABLE %NFileName
#!  INDEX %NKeyName
  ADD CONSTRAINT %NKeyName INDEX (%NKeyFields)
;

          #ENDCASE
        #ELSE
          #CASE(%KeyIndex)
          #OF  ('KEY')
ALTER TABLE %NFileName
  ADD CONSTRAINT %NKeyName UNIQUE (%NKeyFields)
;

          #OF  ('INDEX')
          #OROF('DYNAMIC')
ALTER TABLE %NFileName
#!  ADD UNIQUE INDEX %NKeyName
  ADD CONSTRAINT %NKeyName UNIQUE KEY (%NKeyFields)
;

          #ENDCASE
        #ENDIF
      #ENDIF
    #ENDFOR
    #IF(NOT %PrimaryCount)
--
-- WARNING: %File(%FilePrefix) has no PRIMARY KEY defined.
--
    #ENDIF
  #ELSE
--
-- WARNING: %File(%FilePrefix) has no KEYS defined.
--
  #ENDIF
#ENDFOR
--
-- EOF: %OutIndexName
--
  #CLOSE(%OutIndexName)
#ENDIF
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#IF(%SQLRelat)
  #SET(%OutRelatName,%SQLDirectory & %SQLRelatName)
  #CREATE(%OutRelatName)
  #MESSAGE('The SYBASE Script Creator',0)
  #MESSAGE('Creating: ' & %SQLRelatName,1)
--
-- BOF: %OutRelatName
--
-- SQL script creator for SYBASE database [RELATIONS]
-- Created: %TheDate - %TheTime
--

#!
  #SET(%RelCount, 0)
  #FOR(%File)
    #CASE(%FileDriver)
      #OF('ASCII')
    #OROF('BASIC')
    #OROF('DOS')
        #CYCLE
    #ENDCASE
#!
    #CASE(%FileType)
    #OF  ('VIEW')
#!------------------------------------------------------------!
#! RAS.2001.07.22 - Need to deal with aliases for the purpose !
#! of discovering additional key relationships that can not   !
#! be done with a single file from Clarion. In specific       !
#!                                                            !
#! Tables                                                     !
#!  Party_Table         Party_Relationship_Table              !
#!  Party_Id            Party_Id_From                         !
#!                      Party_Id_To                           !
#! Relations                                                  !
#!  Party_Id    <->>    Party_Id_From                         !
#!  Party_Id    <->>    Party_Id_To                           !
#!                                                            !
#! Clarion would need an alias of Party_Relationship_Table to !
#! deal with the second relationship. There would be no way   !
#! to use the second table again since Clarion restricts that !
#! specific operation.                                        !
#!                                                            !
#! SQL handles these type of relationships correctly and they !
#! need to be generated as an original file relationship.     !
#!------------------------------------------------------------!
#!  #OROF('ALIAS')
        #CYCLE
    #ENDCASE
#!
    #SET(%NFileName,%File)
    #IF(%UsePrefix)
      #SET(%NFileName,%FilePrefix & '_' & %File)
    #ENDIF
    #SET(%SqlWordItem, UPPER(%NFileName))
    #FIND(%SqlWordList, %SqlWordItem)
    #IF(%SqlWordList)
      #ADD(%ReservedFieldList, %FoundFileName & %NFileName)
      #SET(%NFileName, %NFileName & '_')
    #ENDIF
#!
    #SET(%TheCount, 0)
    #IF(ITEMS(%Relation))
      #FOR(%Relation)
        #SET(%nLoc1,INSTRING('RASQL(',%RelationUserOptions,1,1))
        #SET(%nLoc2,INSTRING(')',%RelationUserOptions,1,%nLoc1))
        #SET(%nRelationUser,UPPER(SUB(%RelationUserOptions,%nLoc1,%nLoc2)))
        #!SET(%NRelationUser,UPPER(EXTRACT(%RelationUserOptions,'RASQL')))
        #SET(%NRelationOpt1,EXTRACT(%NRelationUser,'RASQL',1))
        #SET(%NRelationOpt2,EXTRACT(%NRelationUser,'RASQL',2))
        #SET(%NRelationOpt3,EXTRACT(%NRelationUser,'RASQL',3))
        #SET(%NRelationOpt4,EXTRACT(%NRelationUser,'RASQL',4))
#!%NRelationUser, %NRelationOpt1, %NRelationOpt2, %NRelationOpt3, %NRelationOpt4
        #!-----------------------------------------------------------------!
        #! The first option RASQL(NO) controls if a relation is processed. !
        #!-----------------------------------------------------------------!
        #IF(SUB(%NRelationOpt1,1,1)='N')
          #CYCLE
        #ENDIF
#!
        #IF(%FileRelationType = 'MANY:1')
          #SET(%Relationfield1, '')
          #SET(%Relationfield2, '')
          #SET(%NKeyField, SUB(%FileKey, INSTRING(':',%FileKey,1,1) + 1 , 50))
          #IF(NOT %NKeyField)
            #SET(%NKeyField, SUB(%RelationKey, INSTRING(':',%RelationKey,1,1) + 1 , 50))
          #ENDIF
          #IF(%UsePrefix)
            #SET(%NKeyField, %FilePrefix & '_' & %NKeyField)
          #ENDIF
          #SET(%SqlWordItem, UPPER(%NKeyField))
          #FIND(%SqlWordList, %SqlWordItem)
          #IF(%SqlWordList)
            #ADD(%ReservedFieldList, %FoundKeyField & %FilePrefix & ':' & %NKeyField)
            #SET(%NKeyField, %NKeyField & '_')
          #ENDIF
          #!
          #SET(%NRelateFile, %Relation)
          #IF(%UsePrefix)
            #SET(%NRelateFile, %RelationPrefix & '_' & %Relation)
          #ENDIF
          #SET(%SqlWordItem, UPPER(%NRelateFile))
          #FIND(%SqlWordList, %SqlWordItem)
          #IF(%SqlWordList)
            #ADD(%ReservedFieldList, %FoundRelatedName & %NRelateFile)
            #SET(%NRelateFile, %NRelateFile & '_')
          #ENDIF
          #!
          #SET(%RelationField1Count, ITEMS(%FileKeyField))
          #SET(%RelationField2Count, ITEMS(%RelationKeyField))
          #!
          #SET(%NRelateCount, %RelationField1Count)
          #SET(%NRelateComma, %NRelateCount - 1)
          #SET(%NRelateItem, 0)
          #FOR(%FileKeyField)
            #IF(%NRelateItem > %NRelateCount)
              #BREAK
            #ENDIF
            #SET(%NRelateItem, %NRelateItem + 1)
            #SET(%NRelateField1, SUB(%FileKeyField,INSTRING(':',%FileKeyField,1,1)+1,50))
            #SET(%NRelateField2, SUB(%FileKeyFieldLink,INSTRING(':',%FileKeyFieldLink,1,1)+1,50))
            #!
            #IF(%UsePrefix)
              #SET(%NRelateField1, %FilePrefix & '_' & %NRelateField1)
            #ENDIF
            #SET(%SqlWordItem, UPPER(%NRelateField1))
            #FIND(%SqlWordList, %SqlWordItem)
            #IF(%SqlWordList)
              #ADD(%ReservedFieldList, %FoundRelatedField & %FilePrefix & ':' & %NRelateField1)
              #SET(%NRelateField1, %NRelateField1 & '_')
            #ENDIF
            #!
            #IF(%UsePrefix)
              #SET(%NRelateField2, %RelationPrefix & '_' & %NRelateField2)
            #ENDIF
            #SET(%SqlWordItem, UPPER(%NRelateField2))
            #FIND(%SqlWordList, %SqlWordItem)
            #IF(%SqlWordList)
              #ADD(%ReservedFieldList, %FoundRelatedField & %RelationPrefix & ':' & %NRelateField2)
              #SET(%NRelateField2, %NRelateField2 & '_')
            #ENDIF
            #!
            #SET(%RelationField1, %RelationField1 & %NRelateField1)
            #SET(%RelationField2, %RelationField2 & %NRelateField2)
            #IF(%NRelateComma)
              #SET(%NRelateComma, %NRelateComma - 1)
              #SET(%RelationField1, %RelationField1 & ', ')
              #SET(%RelationField2, %RelationField2 & ', ')
            #ENDIF
          #ENDFOR
          #!-------------------------------------------!
          #! RAS.2001.01.20 - Added this feature.      !
          #! Has syntax errors, so commented out.      !
          #!-------------------------------------------!
          #! Added to the comments so programmer is at !
          #! aware that other relationships may exist. !
          #!-------------------------------------------!
          #SET(%RelationUpdate,%RelationConstraintUpdate)       #! ON UPDATE ?
          #SET(%RelationDelete,%RelationConstraintDelete)       #! ON DELETE ?
          #!-------------------------------------------!
          #IF(%Relationfield1)
            #MESSAGE('Relation of: ' & %File,2)
            #SET(%RelCount, %RelCount + 1)
            #!----------------------------------------------------------!
            #! RAS.2001.07.22 - The alias name gets changed to the real !
            #! name to generate the SQL statement for the relationship. !
            #!----------------------------------------------------------!
            #IF(%FileType = 'ALIAS')
              #SET(%NFileName,%AliasFile)
              #FIX(%File, %AliasFile)
              #IF(%UsePrefix)
                #SET(%NFileName,%FilePrefix & '_' & %File)
              #ENDIF
            #ENDIF
            #IF(%TheCount = 0)
#!PRINT '%NFileName'
            #ENDIF
            #SET(%TheCount,%TheCount+1)
ALTER TABLE %NFileName
   ADD CONSTRAINT Rel_%NKeyField
   FOREIGN KEY (%Relationfield1)
   REFERENCES %NRelateFile (%Relationfield2)
            #IF(%RelationUpdate)
#!   ON UPDATE %RelationUpdate
            #ENDIF
            #IF(%RelationDelete)
#!   ON DELETE %RelationDelete
            #ENDIF
;

          #ENDIF
        #ENDIF
      #ENDFOR
    #ENDIF
  #ENDFOR

--
-- EOF: %OutRelatName
--
  #CLOSE(%OutRelatName)
#ENDIF
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#IF(%SQLTable)
  #RUN('NOTEPAD.EXE "' & %OutTableName & '"')
#ENDIF
#IF(%SQLGrant)
  #RUN('NOTEPAD.EXE "' & %OutGrantName & '"')
#ENDIF
#IF(%SQLIndex)
  #RUN('NOTEPAD.EXE "' & %OutIndexName & '"')
#ENDIF
#IF(%SQLRelat)
  #RUN('NOTEPAD.EXE "' & %OutRelatName & '"')
#ENDIF
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%SYSqlField)
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#! Dump the fields here for a MSSQL database back end.                !
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#!--------------------------------------------------------------------!
#SET(%InnerGroup, 0)
#SET(%FieldComma, ITEMS(%Field) - 1)
#!
#FOR(%Field)
#! FieldComma='%FieldComma'
  #SET(%nLoc1,INSTRING('RASQL(',%FieldUserOptions,1,1))
  #SET(%nLoc2,INSTRING(')',%FieldUserOptions,1,%nLoc1))
  #SET(%nFieldUser,UPPER(SUB(%FieldUserOptions,%nLoc1,%nLoc2)))
  #!SET(%NFieldUser,UPPER(EXTRACT(%FieldUserOptions,'RASQL')))
  #SET(%NFieldOpt1,EXTRACT(%NFieldUser,'RASQL',1))
  #SET(%NFieldOpt2,EXTRACT(%NFieldUser,'RASQL',2))
  #SET(%NFieldOpt3,EXTRACT(%NFieldUser,'RASQL',3))
  #SET(%NFieldOpt4,EXTRACT(%NFieldUser,'RASQL',4))
#!%NFieldUser, %NFieldOpt1, %NFieldOpt2, %NFieldOpt3, %NFieldOpt4
  #!--------------------------------------------------------------!
  #! The first option RASQL(NO) controls if a field is processed. !
  #!--------------------------------------------------------------!
  #! WARNING: The last field can NOT be an ommited field.         !
  #!--------------------------------------------------------------!
  #! And if the last field happens to be and 'END', you will need !
  #! to add a RASQL(END) to the last field before the 'END'. This !
  #! will suppress the last comma. Reality sometimes happens.     !
  #!--------------------------------------------------------------!
  #IF(SUB(%NFieldOpt1,1,1)='N')
    #SET(%FieldComma, %FieldComma - 1)
    #CYCLE
  #ENDIF
#!
  #SET(%NFieldType, '')                                         #! Field type
  #SET(%NFieldName, '')                                         #! Field name
  #SET(%NFieldTSql, '')                                         #! Field SQL type
  #SET(%NFieldDef,  '')                                         #! Field default
  #SET(%NFieldAuto, '')                                         #! Field AUTO_INCREMENT
  #SET(%NFieldNN,   '')                                         #! Field NOT NULL
  #SET(%NFieldSize, 0)                                          #! Field decimal size
  #SET(%NFieldDec,  0)                                          #! Field decimal places
  #!------------------------------------------------!
  #! Begin removal of types that are not processed. !
  #!------------------------------------------------!
  #IF(%FieldType='GROUP')
    #SET(%InnerGroup, %InnerGroup + 1)
    #IF(INSTRING('OVER(',%FieldStatement,1,1))
      #!SET(%FieldCount, %FieldCount + 1)                       #! RAS.2001.01.15
      #!SET(%FieldComma, %FieldComma - 1)                       #! RAS.2001.01.12
    #ENDIF
    #SET(%FieldComma, %FieldComma - 1)                          #! RAS.2001.01.12
    #CYCLE
  #ENDIF
  #!
  #IF(%FieldType='END')
    #SET(%InnerGroup, %InnerGroup - 1)
    #SET(%FieldComma, %FieldComma - 1)
    #CYCLE
  #ENDIF
  #SET(%FD1L,%FieldDimension1)                                  #! Name 1 made shorter
  #SET(%FD2L,%FieldDimension2)                                  #! Name 2 made shorter
  #SET(%FD3L,%FieldDimension3)                                  #! Name 3 made shorter
  #SET(%FD4L,%FieldDimension4)                                  #! Name 4 made shorter
  #IF(%FD1L>0)                                                  #! IF we got array field,
    #IF(NOT %NoArrayOver)                                       #! AND we got groups,
      #SET(%FieldComma, %FieldComma - 1)                        #! THEN ignore the array
      #CYCLE                                                    #! field since the fields
    #ENDIF                                                      #! in the group are going
  #ENDIF                                                        #! to define the array.
  #!------------------------------------------------!
  #! Ended removal of types that are not processed. !
  #!------------------------------------------------!
#!
  #SET(%NFieldName, %FieldID)                                   #! Field Name
  #IF(%UsePrefix)                                               #! RAS.2001.12.01
    #SET(%NFieldName, %FilePrefix & '_' & %FieldID)             #! RAS.2001.10.24
  #ENDIF                                                        #! RAS.2001.12.01
  #SET(%SqlWordItem, UPPER(%NFieldName))                        #! Set up search of
  #FIND(%SqlWordList, %SqlWordItem)                             #! SQL reserved words
  #IF(%SqlWordList)                                             #! Found? Yes! We add
    #ADD(%ReservedFieldList, %FoundFileField & %FilePrefix & ':' & %NFieldName)
    #SET(%NFieldName, %NFieldName & '_')                        #! trailing underscore
  #ENDIF                                                        #! to get it through
#!
  #SET(%FieldCount, %FieldCount + 1)                            #! Add to field count
  #IF(%NFieldName=%NFieldPKey)                                  #! File Primary Key?
    #IF(%NFieldOpt3)                                            #! Do I have options?
      #IF(INSTRING('PKEYA',%NFieldOpt3,1,1))                    #! PKEYA already set?
      #ELSE                                                     #! No. So add it on.
        #SET(%NFieldOpt3,%NFieldOpt3 & '+PKEYA')                #! Just append option
      #ENDIF                                                    #! at the end of all.
    #ELSE                                                       #! No options found.
      #SET(%NFieldOpt3,'PKEYA')                                 #! Set primary key on
    #ENDIF                                                      #! as option and let
  #ENDIF                                                        #! it be handled
#!
  #!----------------------------------------------------------------!
  #! The second option RASQL(,<FieldType>) overrides the field type !
  #! in the dictionary. This allows conversion of data types that   !
  #! have no existance in the dictionary but exist in the SQL.      !
  #!----------------------------------------------------------------!
  #SET(%NFieldType, %FieldType)
  #IF(%NFieldOpt2)
    #SET(%NFieldType, %NFieldOpt2)
  #ENDIF
#!
  #!----------------------------------------------------!
  #! Calculate decimal size and places for some fields. !
  #! Only DECIMAL fields have characters and decimals.  !
  #! Everything else that needs it, is figured out from !
  #! the display mask used.                             !
  #!----------------------------------------------------!
  #! RAS.2001.01.12 - Added additional MySQL types.     !
  #!----------------------------------------------------!
  #SET(%NLeadZero, 0)                                           #! NO leading zero
  #SET(%NFieldSize, %FieldMemoSize)                             #! Field decimal size
  #SET(%NFieldDec, %FieldPlaces)                                #! Field decimal places
  #CASE(%NFieldType)
  #OF  ('DEC')                                                  #! NFieldOpt2: MySQL
  #OROF('NUMERIC')                                              #! NFieldOpt2: MySQL
  #OROF('SREAL')
  #OROF('BFLOAT4')
  #OROF('FLOAT')                                                #! NFieldOpt2: MySQL
  #OROF('FLOAT4')                                               #! NFieldOpt2: MySQL
  #OROF('REAL')
  #OROF('BFLOAT8')
  #OROF('DOUBLE')                                               #! NFieldOpt2: MySQL
  #OROF('FLOAT8')                                               #! NFieldOpt2: MySQL
    #SET(%nLoc1,INSTRING('-',%FieldDisplayPicture,1,1))
    #IF(NOT %nLoc1)
      #SET(%nLoc1,INSTRING('N',UPPER(%FieldDisplayPicture),1,1))
    #ENDIF
    #SET(%nLoc2,INSTRING('.',%FieldDisplayPicture,1,1))
    #SET(%NFieldSize,SUB(%FieldDisplayPicture,(%nLoc1+1),(%nLoc2-1)))
    #SET(%NFieldDec,SUB(%FieldDisplayPicture,(%nLoc2+1),LEN(%FieldDisplayPicture)))
  #!--------------------------------------------------------!
  #! RAS.2001.10.23 - Parse sizes for non-decimal numerics. !
  #! And set the leading zero flag if you find the need.    !
  #!--------------------------------------------------------!
  #OF  ('LONG')
  #OROF('ULONG')
  #OROF('SHORT')
  #OROF('USHORT')
  #OROF('BYTE')
    #SET(%nLoc1,INSTRING('-',%FieldDisplayPicture,1,1))
    #IF(NOT %nLoc1)
      #SET(%nLoc1,INSTRING('_',UPPER(%FieldDisplayPicture),1,1))
    #ENDIF
    #IF(NOT %nLoc1)
      #SET(%nLoc1,INSTRING('N',UPPER(%FieldDisplayPicture),1,1))
    #ENDIF
    #SET(%nLoc2,(LEN(%FieldDisplayPicture) - %nLoc1 + 1))
    #SET(%NFieldSize,SUB(%FieldDisplayPicture,(%nLoc1+1),(%nLoc2-1)))
    #SET(%NLeadZero,INSTRING('N0',UPPER(%FieldDisplayPicture),1,1))
  #ENDCASE
#!-- "%FieldDisplayPicture", %nLoc1, %nLoc2, (%NFieldSize, %NFieldDec), %NLeadZero
  #!-------------------------------------------------!
  #! Deal with the initial values in the dictionary. !
  #!-------------------------------------------------!
  #SET(%NFieldDef, '')
  #!------------------------------------------------------!
  #! Deal with the dictionary field type conversion here. !
  #!------------------------------------------------------!
  #CASE(%NFieldType)
  #OF  ('BLOB')
    #IF(%FieldMemoSize < 256)
      #SET(%NFieldTSql, 'CHAR(' & %FieldMemoSize & ')' )
    #ELSE
      #SET(%NFieldTSql, 'VARCHAR(' & %FieldMemoSize & ')' )
    #ENDIF
  #OF  ('MEMO')
  #OROF('STRING')
    #IF(%FieldMemoSize < 256)
      #SET(%NFieldTSql, 'CHAR(' & %FieldMemoSize & ')' )
    #ELSE
      #SET(%NFieldTSql, 'VARCHAR(' & %FieldMemoSize & ')' )
    #ENDIF
  #OF  ('CSTRING')
  #OROF('PSTRING')
      #SET(%CStringLen, %FieldMemoSize - 1)
    #IF(%CStringLen < 256)
      #SET(%NFieldTSql, 'CHAR(' & %CStringLen & ')' )
    #ELSE
      #SET(%NFieldTSql, 'VARCHAR(' & %CStringLen & ')' )
    #ENDIF
  #OF  ('LONG')
  #OROF('INT')
  #OROF('INT4')
  #OROF('INTEGER')
      #SET(%NFieldTSql, 'INT')
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
    #IF(INSTRING('@D',UPPER(%FieldRecordPicture),1,1))
      #SET(%NFieldTSql, 'DATE')
      #SET(%NFieldNN,   '')
    #ENDIF
    #IF(INSTRING('@D',UPPER(%FieldDisplayPicture),1,1))
      #SET(%NFieldTSql, 'DATE')
      #SET(%NFieldNN,   '')
    #ENDIF
    #IF(INSTRING('@T',UPPER(%FieldRecordPicture),1,1))
      #SET(%NFieldTSql, 'TIME')
      #SET(%NFieldNN,   '')
    #ENDIF
    #IF(INSTRING('@T',UPPER(%FieldDisplayPicture),1,1))
      #SET(%NFieldTSql, 'TIME')
      #SET(%NFieldNN,   '')
    #ENDIF
  #OF  ('SHORT')
  #OROF('SMALLINT')
  #OROF('INT2')
      #SET(%NFieldTSql, 'SMALLINT')
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
  #OF  ('BYTE')
  #OROF('UTINYINT')
  #OROF('UINT1')
      #SET(%NFieldTSql, 'TINYINT')
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
  #OF  ('ULONG')
  #OROF('UINT')
  #OROF('UINT4')
      #SET(%NFieldTSql, 'INT')
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
  #OF  ('USHORT')
  #OROF('USMALLINT')
  #OROF('UINT2')
      #SET(%NFieldTSql, 'SMALLINT')
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
  #OF  ('DECIMAL')
  #OROF('PDECIMAL')
  #OROF('DEC')
  #OROF('NUMERIC')
  #!---------------------------------------------------------------------!
  #! RAS.2001.01.09 - IMPORTANT - READ THIS NOW.                         !
  #!---------------------------------------------------------------------!
  #! There is a very big assumption here that your doing a business type !
  #! application so you want to convert binary inaccurate formats to the !
  #! totally binary (financial) accurate format of DECIMAL.              !
  #!---------------------------------------------------------------------!
  #! I get tired of those hours of time spent on penny off errors on     !
  #! financial screens and reports with a calculator to finally come up  !
  #! with the solution of "It is a rounding error!" due to the binary    !
  #! inaccurate format representation of "floats" and "doubles" that     !
  #! are often used to represent money amounts with an actual fractional !
  #! point part for the cents. This happens often in older applications  !
  #! written in languages that did not have a decimal type and with      !
  #! people that did not have experience or knowledge enough to save     !
  #! those financial amounts as whole pennies and adjust their formulas. !
  #!---------------------------------------------------------------------!
  #! If you need the SREAL (4 bytes) and REAL (8 bytes) left alone then  !
  #! move them somewhere else.                                           !
  #!---------------------------------------------------------------------!
  #OROF('SREAL')
  #OROF('BFLOAT4')
  #OROF('FLOAT')
  #OROF('FLOAT4')
  #OROF('REAL')
  #OROF('BFLOAT8')
  #OROF('DOUBLE')
  #OROF('FLOAT8')
      #SET(%NFieldTSql, 'DECIMAL(' & %NFieldSize & ',' & %NFieldDec & ')')
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
  #OF  ('DATE')
  #OROF('TIME')
      #SET(%NFieldTSql, %NFieldType)
      #SET(%NFieldDef,  '')
      #SET(%NFieldNN,   '')
#!
  #ELSE
      #!---------------------------------------------!
      #! This is a field type not currently handled. !
      #! Time to do some more template programming.  !
      #!---------------------------------------------!
      #SET(%NFieldTSql,'***' & %NFieldType & '***')
  #ENDCASE
  #!----------------------------------------------------------!
  #! Deal with field validation parameters in the dictionary. !
  #!----------------------------------------------------------!
  #! If you are validating something, that means it's going   !
  #! to have some value. Mark it as NOT NULL.                 !
  #!----------------------------------------------------------!
  #SET(%NFieldNN,       'NULL')
  #IF(%FieldValidation)
    #SET(%NFieldNN,     'NOT NULL')
  #ENDIF
  #!--------------------------------------------------------------!
  #! RAS.2001.09.09 - Default detected auto-increment attribute.  !
  #!--------------------------------------------------------------!
  #IF(%NFieldName = %NFNameAuto)
    #SET(%NFieldAuto,   'IDENTITY (1, 1)')
    #SET(%NFieldAuto,   '')                                     #! RAS.2002.05.11
    #SET(%NFieldNN,     'NOT NULL')
  #ENDIF
#!
  #ADD(%FieldTable,   %FieldID)
#!
  #SET(%IFieldInKey,%Field)                                     #! Field Name
  #FIND(%LFieldInKey,%IFieldInKey)                              #! Field In Key list lookup
  #IF(%LFieldInKey)                                             #! Found? Yes, part of key.
    #SET(%NFieldNN,     'NOT NULL')                             #! Primary keys fields can
  #ENDIF                                                        #! not be NULL. Make it so!
#!
  #!----------------------------------------------------------------------------!
  #!----------------------------------------------------------------------------!
  #! This is the actual SQL field data line creation.                           !
  #!----------------------------------------------------------------------------!
  #!----------------------------------------------------------------------------!
#!
  #IF(%FD1L>0)                                                  #! We GOT array field
  #!----------------------------------------------------------------------------!
  #! If we got an array field at this point, we do not have arrays over groups. !
  #! We have simple array fields and must add additional fields to the table.   !
  #!----------------------------------------------------------------------------!
    #SET(%FldArray,'')                                          #! Clear created name
    #SET(%FD1S,'')                                              #! Number dimension 1
    #SET(%FD2S,'')                                              #! Number dimension 2
    #SET(%FD3S,'')                                              #! Number dimension 3
    #SET(%FD4S,'')                                              #! Number dimension 4
    #!
    #SET(%DimCount,1)                                           #! Got dimension 1
    #IF(%FD2L>0)                                                #! Dimension 2?
      #SET(%DimCount,%DimCount+1)                               #! Got dimension 2
      #IF(%FD3L>0)                                              #! Dimension 3?
        #SET(%DimCount,%DimCount+1)                             #! Got dimension 3
        #IF(%FD4L>0)                                            #! Dimension 4?
          #SET(%DimCount,%DimCount+1)                           #! Got dimension 4
        #ENDIF                                                  #! Dimension 4?
      #ENDIF                                                    #! Dimension 3?
    #ENDIF                                                      #! Dimension 2?
    #!
    #CASE(%DimCount)                                            #! Logic on dimension
    #OF(1)                                                      #! A 1 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #SET(%FldArray,%NFieldName & %FD1S)
        #SET(%NFieldLine,   '')
        #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
        #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
        #IF(%NFieldAuto)
          #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
        #ENDIF
        #IF(%NFieldNN)
          #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
        #ENDIF
        #IF(%NFieldDef)
          #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)
        #ENDIF
        #IF(%FD1I=%FD1L)                                        #! Last field?
#!-- %FldArray
          #IF(%FieldComma > 0)
            #SET(%FieldComma, %FieldComma - 1)
            #IF(SUB(%NFieldOpt1,1,1)='E')                       #! RASQL(END)
  %NFieldLine
            #ELSE
  %NFieldLine ,
            #ENDIF
          #ELSE
  %NFieldLine
          #ENDIF
        #ELSE                                                   #! Not last field
  %NFieldLine ,
        #ENDIF                                                  #! Just dump stuff
      #ENDLOOP
    #OF(2)                                                      #! A 2 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #LOOP,FOR(%FD2I,1,%FD2L)
          #SET(%FD2S,'_' & %FD2I)
          #SET(%FldArray,%NFieldName & %FD1S & %FD2S)
          #SET(%NFieldLine,   '')
          #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
          #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
          #IF(%NFieldAuto)
            #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
          #ENDIF
          #IF(%NFieldNN)
            #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
          #ENDIF
          #IF(%NFieldDef)
            #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)
          #ENDIF
          #IF((%FD1I=%FD1L)AND(%FD2I=%FD2L))                    #! Last field?
#!-- %FldArray
            #IF(%FieldComma > 0)
              #SET(%FieldComma, %FieldComma - 1)
              #IF(SUB(%NFieldOpt1,1,1)='E')                     #! RASQL(END)
  %NFieldLine
              #ELSE
  %NFieldLine ,
              #ENDIF
            #ELSE
  %NFieldLine
            #ENDIF
          #ELSE                                                 #! Not last field
  %NFieldLine ,
          #ENDIF                                                #! Just dump stuff
        #ENDLOOP
      #ENDLOOP
    #OF(3)                                                      #! A 3 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #LOOP,FOR(%FD2I,1,%FD2L)
          #SET(%FD2S,'_' & %FD2I)
          #LOOP,FOR(%FD3I,1,%FD3L)
            #SET(%FD3S,'_' & %FD3I)
            #SET(%FldArray,%NFieldName & %FD1S & %FD2S & %FD3S)
            #SET(%NFieldLine,   '')
            #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
            #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
            #IF(%NFieldAuto)
              #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
            #ENDIF
            #IF(%NFieldNN)
              #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
            #ENDIF
            #IF(%NFieldDef)
              #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)
            #ENDIF
            #IF((%FD1I=%FD1L)AND(%FD2I=%FD2L)AND(%FD3I=%FD3L))  #! Last field?
#!-- %FldArray
              #IF(%FieldComma > 0)
                #SET(%FieldComma, %FieldComma - 1)
                #IF(SUB(%NFieldOpt1,1,1)='E')                   #! RASQL(END)
  %NFieldLine
                #ELSE
  %NFieldLine ,
                #ENDIF
              #ELSE
  %NFieldLine
              #ENDIF
            #ELSE                                               #! Not last field
  %NFieldLine ,
            #ENDIF                                              #! Just dump stuff
          #ENDLOOP
        #ENDLOOP
      #ENDLOOP
    #OF(4)                                                      #! A 4 dimension array
      #LOOP,FOR(%FD1I,1,%FD1L)
        #SET(%FD1S,'_' & %FD1I)
        #LOOP,FOR(%FD2I,1,%FD2L)
          #SET(%FD2S,'_' & %FD2I)
          #LOOP,FOR(%FD3I,1,%FD3L)
            #SET(%FD3S,'_' & %FD3I)
            #LOOP,FOR(%FD4I,1,%FD4L)
              #SET(%FD4S,'_' & %FD4I)
              #SET(%FldArray,%NFieldName & %FD1S & %FD2S & %FD3S & %FD4S)
              #SET(%NFieldLine,   '')
              #SET(%NFieldLine,   %NFieldLine & ''  & %FldArray)
              #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)
              #IF(%NFieldAuto)
                #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)
              #ENDIF
              #IF(%NFieldNN)
                #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)
              #ENDIF
              #IF(%NFieldDef)
                #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)
              #ENDIF
              #IF((%FD1I=%FD1L)AND(%FD2I=%FD2L)AND(%FD3I=%FD3L)AND(%FD4I=%FD4L)) #! Last field?
#!-- %FldArray
                #IF(%FieldComma > 0)
                  #SET(%FieldComma, %FieldComma - 1)
                  #IF(SUB(%NFieldOpt1,1,1)='E')                 #! RASQL(END)
  %NFieldLine
                  #ELSE
  %NFieldLine ,
                  #ENDIF
                #ELSE
  %NFieldLine
                #ENDIF
              #ELSE                                             #! Not last field
  %NFieldLine ,
              #ENDIF                                            #! Just dump stuff
            #ENDLOOP
          #ENDLOOP
        #ENDLOOP
      #ENDLOOP
    #ENDCASE
#!
  #ELSE                                                         #! We GOT normal field
  #!----------------------------------------------------------------------------!
  #! This processes the normal fields that are NOT an array.                    !
  #!----------------------------------------------------------------------------!
    #SET(%NFieldLine,   '')
    #SET(%NFieldLine,   %NFieldLine & ''  & %NFieldName)        #! Field Name
    #SET(%NFieldLine,   %NFieldLine & ' ' & %NFieldTSql)        #! SQL Type
    #IF(%NFieldAuto)
      #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldAuto)        #! AUTO_INCREMENT
    #ENDIF
    #IF(%NFieldNN)
      #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldNN)          #! NOT NULL
    #ENDIF
    #IF(%NFieldDef)
      #SET(%NFieldLine, %NFieldLine & ' ' & %NFieldDef)         #! DEFAULT
    #ENDIF
    #!
    #IF(%FieldComma > 0)
      #SET(%FieldComma, %FieldComma - 1)
      #IF(SUB(%NFieldOpt1,1,1)='E')                             #! RASQL(END)
  %NFieldLine
      #ELSE
  %NFieldLine ,
      #ENDIF
    #ELSE
  %NFieldLine
    #ENDIF
  #ENDIF
#!
  #!----------------------------------------------------------------------------!
  #!----------------------------------------------------------------------------!
#!
#ENDFOR
#!---------------------------------------------------------------------
#GROUP(%SYSqlFieldEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#GROUP(%Dct2SYBASEEnd)
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------
#!---------------------------------------------------------------------