lightranger5

\mainpage Main Page

---

LightRanger 5 click

LightRanger 5 Click is a compact add-on board that contains a ranging sensor with multi-target detection. This board features the TMF8801, a dToF (direct time of flight) optical distance sensor achieving up to 2500mm target detection distance from company AMS-TAOS.

click Product page

---

Click library

• Author : Nenad Filipovic
• Date : Mar 2021.
• Type : I2C type

Software Support

We provide a library for the LightRanger5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE github account.

Library Description

This library contains API for LightRanger5 Click driver.

Standard key functions :

• lightranger5_cfg_setup Config Object Initialization function.

void lightranger5_cfg_setup ( lightranger5_cfg_t *cfg );

• lightranger5_init Initialization function.

LIGHTRANGER5_RETVAL lightranger5_init ( lightranger5_t *ctx, lightranger5_cfg_t *cfg );

• lightranger5_default_cfg Click Default Configuration function.

void lightranger5_default_cfg ( lightranger5_t *ctx );

Example key functions :

• lightranger5_get_status LightRanger 5 get status function.

err_t lightranger5_get_status ( lightranger5_t *ctx, uint8_t *status );

• lightranger5_set_factory_calib_data LightRanger 5 set factory calib data function.

err_t lightranger5_set_factory_calib_data ( lightranger5_t *ctx, uint8_t *factory_calib_data );

• lightranger5_measure_distance LightRanger 5 measure distance function.

uint16_t lightranger5_measure_distance ( lightranger5_t *ctx );

Example Description

This is an example that demonstrates the use of the LightRanger 5 click board. This demo application shows an example of distance measurement.

The demo application is composed of two sections :

Application Init

Initialization of I2C module, log UART and additional pins. After driver initialization and default settings, the app performs and check factory calibrationa and check and wait for OK status. This process takes a few seconds, so please wait. After current status is OK, app performs the configuration of the TMF8801 sensor: read and write calibration data, set algorithm state and command data.

void application_init ( void ) {
    log_cfg_t log_cfg;                    /**< Logger config object. */
    lightranger5_cfg_t lightranger5_cfg;  /**< Click config object. */

    // Logger initialization.

    LOG_MAP_USB_UART( log_cfg );
    log_cfg.level = LOG_LEVEL_DEBUG;
    log_cfg.baud = 115200;
    log_init( &logger, &log_cfg );
    log_printf( &logger, "\r\n" );
    log_info( &logger, " Application Init " );

    // Click initialization.

    lightranger5_cfg_setup( &lightranger5_cfg );
    LIGHTRANGER5_MAP_MIKROBUS( lightranger5_cfg, MIKROBUS_1 );
    err_t init_flag = lightranger5_init( &lightranger5, &lightranger5_cfg );
    if ( init_flag == I2C_MASTER_ERROR ) {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }
    
    lightranger5_default_cfg( &lightranger5 );
    log_info( &logger, " Application Task " );
    Delay_ms( 100 );
    
    if ( !lightranger5_check_factory_calibration( &lightranger5 ) ) {
        log_info( &logger, " Factory calibration success." );
    } else {
        log_info( &logger, " Factory calibration FAILED." );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }
    
    do {
        lightranger5_get_status( &lightranger5, &status );
        
        if ( status_old != status ) {
            if ( status < LIGHTRANGER5_STATUS_OK ) {
                display_status_no_error( );    
            } else {
                display_status_error( );   
            }  
            status_old = status;
        }
        Delay_ms( 100 );
    } while ( status );
    
    lightranger5_get_factory_calib_data( &lightranger5, factory_calib_data );
    
    log_printf( &logger, "------------------------------\r\n" );
    log_printf( &logger, " factory_calib_data[ 14 ] =\r\n { " );
    
    for ( uint8_t n_cnt = 0 ; n_cnt < 14 ; n_cnt++ ) {
        log_printf( &logger, "0x%.2X, ", factory_calib_data[ n_cnt ] );
    }
    
    log_printf( &logger, "};\r\n" );
    log_printf( &logger, "------------------------------\r\n" );
    
    lightranger5_set_command( &lightranger5, LIGHTRANGER5_CMD_DL_CALIB_AND_STATE );

    lightranger5_set_factory_calib_data( &lightranger5, factory_calib_data );

    lightranger5_set_algorithm_state_data( &lightranger5, tmf8801_algo_state );
    
    lightranger5_set_command_data( &lightranger5, command_data );
    
    lightranger5_get_status( &lightranger5, &status );
        
    if ( status_old != status ) {
        if ( status < LIGHTRANGER5_STATUS_OK ) {
            display_status_no_error( );    
        } else {
            display_status_error( );   
        }  
        status_old = status;
    }
    
    lightranger5_get_currently_run_app( &lightranger5, &appid_data );
    
    if ( appid_data == LIGHTRANGER5_APPID_MEASUREMENT ) {
        log_printf( &logger, " Measurement app running.\r\n" );
    }
    else if ( appid_data == LIGHTRANGER5_APPID_BOOTLOADER ) {
        log_printf( &logger, " Bootloader running.\r\n" );
    } else {
        log_printf( &logger, " Result: 0x%X\r\n", appid_data );    
    }
    
    log_printf( &logger, "------------------------------\r\n" );
}

Application Task

This is an example that shows the use of a LightRanger 5 click board. A new data ready is checked as soon as possible which signals the time required for the ranging sensor to perform the distance measurement. Results are being sent to the Usart Terminal where you can track their changes.

void application_task ( void ) {
    
    if ( lightranger5_check_data_ready( &lightranger5 ) == LIGHTRANGER5_DATA_IS_READY ) {
        uint16_t distance_mm = lightranger5_measure_distance( &lightranger5 );
        
        if ( distance_mm ) {
            log_printf( &logger, "       Distance : %ld mm\r\n", distance_mm );    
        } else {
            log_printf( &logger, "         Out of range    \r\n", distance_mm );    
        }
        
        log_printf( &logger, "------------------------------\r\n" );
    }
    
    Delay_ms( 1000 );
}

Note

<NOTE_IF_REQUIRED>

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE github account.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.LightRanger5

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all Mikroelektronika compilers.

---