uartmux2

\mainpage Main Page

---

UART MUX 2 click

UART MUX 2 Click is a compact add-on board that enables pseudo-multidrop RS232 transmission. This board features the MAX399, a precise CMOS analog multiplexer that allows four remote RS-232 transceivers to share a single UART from Maxim Integrated. It offers fast switching speeds with a transition time of less than 250ns and low on-resistance less than 100Ω while retains CMOS-logic input compatibility and fast switching. Channel selection is performed through a set of specific GPIO pins and possesses additional functionality such as the manual ON/OFF feature.

click Product page

---

Click library

• Author : Nenad Filipovic
• Date : Jan 2021.
• Type : UART type

Software Support

We provide a library for the UartMux2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE github account.

Library Description

This library contains API for UartMux2 Click driver.

Standard key functions :

• uartmux2_cfg_setup Config Object Initialization function.

void uartmux2_cfg_setup ( uartmux2_cfg_t *cfg );

• uartmux2_init Initialization function.

UARTMUX2_RETVAL uartmux2_init ( uartmux2_t *ctx, uartmux2_cfg_t *cfg );

• uartmux2_default_cfg Click Default Configuration function.

void uartmux2_default_cfg ( uartmux2_t *ctx );

Example key functions :

• uartmux2_set_operation_mode UART MUX 2 set operation mode function.

err_t uartmux2_set_operation_mode ( uartmux2_t *ctx, uint8_t op_mode );

• uartmux2_set_channel UART MUX 2 set channel function.

err_t uartmux2_set_channel ( uartmux2_t *ctx, uint8_t mux_ch );

• uartmux2_send_data UART MUX 2 data writing function.

err_t uartmux2_send_data ( uartmux2_t *ctx, char *tx_data );

Example Description

This library contains API for UART MUX 2 Click driver. This example transmits/receives and processes data from UART MUX 2 clicks. The library initializes and defines the UART bus drivers to transmit or receive data.

The demo application is composed of two sections :

Application Init

Initializes driver and set UART channel module.

void application_init ( void ) {
    log_cfg_t log_cfg;  /**< Logger config object. */
    uartmux2_cfg_t uartmux2_cfg;  /**< Click config object. */

    // Logger initialization.

    LOG_MAP_USB_UART( log_cfg );
    log_cfg.level = LOG_LEVEL_DEBUG;
    log_cfg.baud = 9600;
    log_init( &logger, &log_cfg );
    log_printf( &logger, "\r\n Application Init \r\n" );

    // Click initialization.

    uartmux2_cfg_setup( &uartmux2_cfg );
    UARTMUX2_MAP_MIKROBUS( uartmux2_cfg, MIKROBUS_1 );
    err_t init_flag  = uartmux2_init( &uartmux2, &uartmux2_cfg );
    if ( init_flag == UART_ERROR ) {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }

    uartmux2_default_cfg ( &uartmux2 );
    app_buf_len = 0;
    app_buf_cnt = 0;
    log_printf( &logger, "\r\n Application Task \r\n" );
    log_printf( &logger, "------------------\r\n" );
    Delay_ms( 500 );
    
    #ifdef TRANSMITTER
    
        log_printf( &logger, "    Send data:    \r\n" );
        log_printf( &logger, "      mikroE      \r\n" );
        log_printf( &logger, "------------------\r\n" );
        log_printf( &logger, "  Transmit data   \r\n" );
        Delay_ms( 1000 );

    #endif

    #ifdef RECIEVER

        uart_ch = UARTMUX2_CHANNEL_0;
        log_printf( &logger, "   Receive data  \r\n" );
        log_printf( &logger, "      UART%u \r\n", ( uint16_t ) uart_ch );
        uartmux2_set_channel( &uartmux2, uart_ch );
        Delay_ms( 2000 );
    
    #endif
        
    log_printf( &logger, "------------------\r\n" );
}

Application Task

Transmitter/Receiver task depend on uncommented code. Receiver logging each received byte to the UART for data logging, while transmitted send messages every 2 seconds.

void application_task ( void ) {
    #ifdef TRANSMITTER
    
    for ( uart_ch = UARTMUX2_CHANNEL_0; uart_ch <= UARTMUX2_CHANNEL_3; uart_ch++ ) {
        uartmux2_set_channel( &uartmux2, uart_ch );
        Delay_ms( 100 );
        uartmux2_send_data( &uartmux2, demo_message );
        log_printf( &logger, "  UART%u : ", ( uint16_t ) uart_ch ); 
    
        for ( uint8_t cnt = 0; cnt < 9; cnt ++ ) {
            log_printf( &logger, "%c", demo_message[ cnt ] );
            Delay_ms( 100 );
        }
        
        Delay_ms( 2000 );
    }
    
    log_printf( &logger, "------------------\r\n" );
    Delay_ms( 100 );
    
    #endif
    
    #ifdef RECIEVER
    
    uartmux2_process( );

    if ( app_buf_len > 0 ) {
        log_printf( &logger, "%s", app_buf );
        uartmux2_clear_app_buf(  );
    }
    
    #endif
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on mikroE github account.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.UartMux2

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all Mikroelektronika compilers.

---