This repository contains CNC projects designed for the Shapeoko 3 XL. The c2d files are meant to be opened using Carbide Create.
| File | Description |
|---|---|
src/ac_vent.c2d |
Vent hole for portable air conditioner. |
src/band_saw_insert.c2d |
Throat plate for a Grizzly 14" band saw. |
src/chopstick_rests.c2d |
A set of chopstick rests, meant as a learning exercise for 3d carving in Carbide Create Pro. |
src/clamps.c2d |
CNC workholding clamps |
src/coasters.c2d |
Coasters of approximately 6" x 6" |
src/coffee_table/rails_long.c2d |
Long rails for coffee table |
src/coffee_table/rails_short.c2d |
Short rails for coffee table |
src/dutchman.c2d |
A basic dutchman inlay pattern. Cut an inside contour to create a router template, and an outside contour for the inlay itself |
src/laptop_stand/laptop_stand_orig.c2d |
The original laptop stand design based on this design from Winston Moy. |
src/laptop_stand/laptop_stand_1l.c2d |
Laptop stand variant with a single cable guide on the left side. |
src/laptop_stand/laptop_stand_2l.c2d |
Laptop stand variant with two cable guides on the left side. |
src/laptop_stand/laptop_stand_2lr.c2d |
Laptop stand variant with two cable guides, one on each side. |
src/laptop_stand/laptop_stand_2r.c2d |
Laptop stand variant with two cable guides on the right side. |
src/laptop_stand/laptop_stand_plain.c2d |
Laptop stand variant with no cable guides. |
src/lego_drop_tray.c2d |
A drop tray for keys/change/etc., shaped like a Lego character. |
src/office_cabinet/ball_catch_mount.c2d |
Mounting fixture for cabinet ball catches |
src/office_cabinet/door_stop.c2d |
Door stop fixture fixture for cabinets |
src/office_cabinet/long.c2d |
Long retention strips for back of door panels |
src/office_cabinet/short.c2d |
Short retention strips for back of door panels |
src/push_stick.c2d |
Table saw push stick. A band saw must be used to square the inside corner at the heel. |
src/ridgid_spindle_sander_wrench.c2d |
A wrench for loosening the bolt at the top of the spindle of the Ridgid oscillating belt/spindle sander. |
src/serving_boards/serving_board_[1/2/3/4/5].c2d |
A number of different serving board designs. |
src/spoon/[back/front].c2d |
A 3d-carved spoon. Run front.c2d first, and use the resulting dowel holes to align it when flipped. This is easier if the dowel holes are allowed to extend into the wasteboard. |
src/surfacing.c2d |
A generic toolpath for horizontal surfacing passes for flattening operations. |
src/tool_tray.c2d |
Tool tray for organizing CNC tools and accessories. |
src/xl_wasteboard.c2d |
Hole pattern for CNC wasteboard |
