diff --git a/docs/source/build_guide.rst b/docs/source/build_guide.rst index 9972a01b..1b719e6d 100644 --- a/docs/source/build_guide.rst +++ b/docs/source/build_guide.rst @@ -19,6 +19,8 @@ It's all through-hole components, so should be approachable to even beginners... There are still some older photos here from the v1 non-backlit board, but the assembly is the same once the backlight components are in place. +You'll need the TWO pcb's to start with. One contains the electronic components and the other has the shine-through legends and goes on top of the assembled board at the end. You can find the gerber files for both in the main `PiFinder git repo `_ + Backlight Components ------------------------ @@ -239,6 +241,8 @@ Any configuration can technically work with any scope, but since the camera alwa The Flat configuration places the keypad and screen in easy reach for refractors, SCT's and other rear-focuser scopes. When the scope is pointed upward, the screen is tilted towards you for quick access. +All the STL files for the PiFinder case parts can be found in the main `PiFinder git repo `_ + Printed Parts ===========================