CISCOSB-BONJOUR-MIB

CISCOSB-BONJOUR-MIB DEFINITIONS ::= BEGIN

IMPORTS

    OBJECT-TYPE,
    MODULE-IDENTITY                              FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC
    InetAddress, InetAddressType                 FROM INET-ADDRESS-MIB
    InterfaceIndex                               FROM IF-MIB
    switch001                                         FROM CISCOSB-MIB;



rlBonjour MODULE-IDENTITY
          LAST-UPDATED "200909210000Z"
		  ORGANIZATION "Cisco Small Business"

		  CONTACT-INFO
		  "Postal: 170 West Tasman Drive
		  San Jose , CA 95134-1706
		  USA

		  Website: Cisco Small Business Home http://www.cisco.com/smb>;,
		  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

          DESCRIPTION
                 "The private MIB module definition for Bonjour protocol."
          REVISION "200904230000Z"
          DESCRIPTION
                 "Initial revision."
         ::= { switch001 114 }

-- -------------------------------------------------------------
-- global scalar
-- -------------------------------------------------------------

rlBonjourPublish OBJECT-TYPE
    SYNTAX      INTEGER {
        enable  (1),
        disable (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enables or disables Bonjour publishing."


    ::= {rlBonjour 1 }


-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------


RlBonjourServiceState ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION    "Bonjour service status - (per IP interface)."
    SYNTAX INTEGER {
        rlBonjourNotPublished(0),
        rlBonjourInactive(1),
        rlBonjourRegistering(2),
        rlBonjourRunning(3)
}

RlBonjourOperationState ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION    "Bonjour service an L2 interface operation state."
    SYNTAX INTEGER {
        up(1),
        down(2)
}

RlBonjourOperationReason ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION    "Bonjour service an L2 interface operation state."
    SYNTAX INTEGER {
        notExclude(0),
        include(1),
        notInclude(2),
        exclude(3),
        bonjourDisabled(4),
        serviceDisabled(5),
        noIPaddress(6),
        l2InterfaceDown(7),
        notPresent(8),
        unknown(9)
}





-- -------------------------------------------------------------
-- ---------   Table      --------------------------------------
-- -------------------------------------------------------------


-- ------------------------------------------------------------
-- ---------   This MIb will not be bound in 750 version, ----------------
-- ---------   The MIb following rlBonjourStateTable will replace it------
-- ------------------------------------------------------------
 rlBonjourStatusTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlBonjourStatusEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The table listing the service bonjour status per service and IP interface.
        In order to keep the table sorted according to the customary lexicographical
        order of the rlBonjourStatusServiceName strings, rlBonjourStatusServiceName
        will be padded with blanks. Bonjour will truncate the padded blanks when advertising this service name.

        Using this MIB user can monitor actual state of a service on an IP interface"
    ::= {rlBonjour 2 }

    rlBonjourStatusEntry  OBJECT-TYPE
    SYNTAX      RlBonjourStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " An entry in the rlBonjourStatusEntry."
    INDEX    { rlBonjourStatusServiceName,rlBonjourStatusIPInterfaceType, rlBonjourStatusIPInterfaceAddr }
    ::= {rlBonjourStatusTable  1 }

    RlBonjourStatusEntry ::= SEQUENCE {
    rlBonjourStatusServiceName     DisplayString ,
    rlBonjourStatusIPInterfaceType InetAddressType,
    rlBonjourStatusIPInterfaceAddr InetAddress,
    rlBonjourStatusState           RlBonjourServiceState
    }



    rlBonjourStatusServiceName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This variable identifies the service name."
    ::= { rlBonjourStatusEntry 1 }


    rlBonjourStatusIPInterfaceType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This variable indicates the type of the IP interface
       on which the Bonjour service should be published."
    ::= { rlBonjourStatusEntry 2 }

    rlBonjourStatusIPInterfaceAddr OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This variable indicates the address of the IP interface
       on which the Bonjour service should be published."
    ::= { rlBonjourStatusEntry 3 }

    rlBonjourStatusState OBJECT-TYPE
    SYNTAX     RlBonjourServiceState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This variable identifies the service state on IP interface of the device."
    ::= { rlBonjourStatusEntry 4 }


 rlBonjourStateTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlBonjourStateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The table listing the service bonjour state per service and L2 interface.
        The services that are displayed here are only those who are supported per project.
        The L2 interfaces that are displayed  here are either:
             L2 interfaces with an IP on it
                    OR
             L2 interfaces listed in the table below
        Per each pair (service and L2 interface) table displays:
            state :
                UP   - Bonjour published the service on this L2 interface
                    Not-exclude - the L2 interface has IP address (L2 interface is in UP state)
                                    AND rlBonjourL2Table is empty
                                    AND rlBonjourL2Mode is disable
                    include - the L2 interfaces are listed in the table rlBonjourL2Table
                                AND rlBonjourL2Mode is enabled
                Down - Bonjour sent goodbye packets regarding this service on this L2 interface
                    exclude - the L2 interface is a member of the rlBonjourL2Table
                              AND rlBonjourL2Mode is disable
                    Not-Include - rlBonjourL2Table is empty
                                  AND rlBonjourL2Mode is enable
                    service disabled - service was removed ue to specific request from L1 manager
                    No IP address    - the L2 interfaces is listed in the table rlBonjourL2EnableTable
                                       BUT don't have an IP on it
                    Not-present      - the L2 interfaces is listed in the table rlBonjourL2EnableTable
                                       BUT no yet defined (like vlan not created or port in an unconnected salve)
                    Bonjour disabled - rlBonjourPublish scalar is off
        Using this MIB user can monitor actual state of a service on an IP interface"
    ::= {rlBonjour 3 }

    rlBonjourStateEntry  OBJECT-TYPE
    SYNTAX      RlBonjourStateEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " An entry in the rlBonjourStatusEntry."
    INDEX    { rlBonjourStateServiceName,rlBonjourStateL2Interface }
    ::= {rlBonjourStateTable  1 }

    RlBonjourStateEntry ::= SEQUENCE {
    rlBonjourStateServiceName      DisplayString ,
    rlBonjourStateL2Interface      InterfaceIndex,
    rlBonjourStateOperationMode    RlBonjourOperationState,
    rlBonjourStateOperationReason  RlBonjourOperationReason
    }



    rlBonjourStateServiceName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This variable identifies the service name."
    ::= { rlBonjourStateEntry 1 }


    rlBonjourStateL2Interface OBJECT-TYPE
    SYNTAX     InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This variable indicates the L2 interface
       on which the Bonjour service should be published."
    ::= { rlBonjourStateEntry 2 }

    rlBonjourStateOperationMode OBJECT-TYPE
    SYNTAX      RlBonjourOperationState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This variable indicates wether Bonjour is operational on the pair (service + L2 interface)."
    ::= { rlBonjourStateEntry 3 }

    rlBonjourStateOperationReason OBJECT-TYPE
    SYNTAX      RlBonjourOperationReason
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This variable specifies the reason of the previous field: rlBonjourStateOperationMode."
    ::= { rlBonjourStateEntry 4 }

 rlBonjourL2Table  OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlBonjourL2Entry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "The table listing the L2 interfaces on which the user wishes to
        enable OR disable Bonjour with respect to rlBonjourL2Mode.
        If rlBonjourL2Mode is set to include AND L2 interface is in this table
        it does not ensure Bonjour WILL publish services on it.
        Publication is also dependent on these fundemental conditions:
            rlBonjourPublish must be on
            at least one service should be enabled
            L2 must be present and UP
            have at least one IP on it
        If this table is empty AND rlBonjourL2Mode is set to include
        Bonjour won't operate at all.
        If rlBonjourL2Mode is set to exclude, and rlBonjourL2Table is empty
        Bonjour will be published on ALL L2 interfaces answering to the
        fundemental conditions specified above.
        If rlBonjourL2Table is NOT empty then Bonjour will operate on
        ALL L2 interfaces answering to the fundemental conditions specified
        above BUT NOT members of this list.
      "
    ::= {rlBonjour 4 }

    rlBonjourL2Entry    OBJECT-TYPE
    SYNTAX      RlBonjourL2Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " An entry in the rlBonjourL2Entry."
    INDEX    { rlBonjourL2Ifindex }
    ::= {rlBonjourL2Table  1 }

    RlBonjourL2Entry ::= SEQUENCE {
    rlBonjourL2Ifindex       InterfaceIndex ,
    rlBonjourL2RowStatus     RowStatus
    }

    rlBonjourL2Ifindex OBJECT-TYPE
    SYNTAX InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This variable identifies the L2 interface."
    ::= { rlBonjourL2Entry 1 }

    rlBonjourL2RowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable identifies the L2 interface status manager."
    ::= { rlBonjourL2Entry 2 }

 rlBonjourL2Mode OBJECT-TYPE
    SYNTAX      INTEGER {
        include  (1),
        exclude  (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "specify whether the L2 interfaces listed in rlBonjourL2Table
         means include bonjour on these L2 interfaces once they:
            rlBonjourPublish must be on
            at least one service should be enabled
            L2 must be present and UP
            have at least one IP on it
         OR  exclude bonjour on these L2 interfaces even if they answer to
         all the conditions above."


    ::= {rlBonjour 5 }

 rlBonjourInstanceName OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Instance Name is given to Bonjour driver by the project part (L1Manager)
        When a conflict occurs: found another station with the same instance name.
        Bonjour driver is required to append _m to the given name
        while m is an incremental integer, increasing on each conflict"

    ::= {rlBonjour 6 }

 rlBonjourHostName OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Host Name is given to Bonjour driver by the project part (L1Manager)
        When a conflict occurs: found another station with the same host name.
        Bonjour driver is required to append _m to the given name
        while m is an incremental integer, increasing on each conflict"

    ::= {rlBonjour 7 }

END