CISCOSB-MAC-BASE-PRIO

CISCOSB-MAC-BASE-PRIO DEFINITIONS ::= BEGIN

-- Title:      CISCOSB MAC BASE PRIO
-- Version:    7.36
-- Date:       1 Apr 2004
--
-- 30-May-2011  Added MODULE-IDENTITY

IMPORTS
    OBJECT-TYPE                                 FROM SNMPv2-SMI
    switch001                                   FROM CISCOSB-MIB
    MacAddress, RowStatus                       FROM SNMPv2-TC;

rlMacBasePrio MODULE-IDENTITY
        LAST-UPDATED "201105300000Z"
		ORGANIZATION "Cisco Small Business"

		CONTACT-INFO
		"Postal: 170 West Tasman Drive
		San Jose , CA 95134-1706
		USA

		Website: Cisco Small Business Home http://www.cisco.com/smb>;,
		Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

        DESCRIPTION
             "The private MIB module definition for MAC base priorities."
        REVISION "201105300000Z"
        DESCRIPTION
             "Initial revision."
        ::= { switch001 101 }

--rlMacBasePrio OBJECT IDENTIFIER ::= { switch001 101 }

rlMacBasePrioMibVersion OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the snmp support version that is supported by
        this device."
    ::= { rlMacBasePrio 1 }

rlMacBasePrioSupport OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(1))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "indicates which features of the max base prio
        are supported:
            (bit 0 is the most significant bit)
            bit 0 - ForceL3Cos
            bit 1 - SADA_TC
        "
    ::= { rlMacBasePrio 2 }

rlMacBasePrioForceL3CosEnable   OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This variable controlls the activation of ForceL3Cos feature in Mac base
        priority"
    ::= { rlMacBasePrio 3 }

rlMacBasePrioForceL3CosTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlMacBasePrioForceL3CosEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table that contains information about ranges
        of addresses that are used in the mac based ptiority
        with the ForceL3Cos feature."
    ::= { rlMacBasePrio 4 }

rlMacBasePrioForceL3CosEntry OBJECT-TYPE
    SYNTAX  RlMacBasePrioForceL3CosEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about ranges of  MAC addresses
        that are used in the mac based priority with
        the ForeL3Cos feature"
    INDEX   { rlMacBasePrioForceL3CosAddress,rlMacBasePrioForceL3CosMask }
    ::= { rlMacBasePrioForceL3CosTable 1 }

RlMacBasePrioForceL3CosEntry ::=
    SEQUENCE {
        rlMacBasePrioForceL3CosAddress
            MacAddress,
        rlMacBasePrioForceL3CosMask
            MacAddress,
        rlMacBasePrioForceL3CosRowStatus
            RowStatus
    }

rlMacBasePrioForceL3CosAddress OBJECT-TYPE
    SYNTAX  MacAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The range of address of this entry.
        The range may not hold MAC multicast addresses. "
    ::= { rlMacBasePrioForceL3CosEntry 1 }

rlMacBasePrioForceL3CosMask OBJECT-TYPE
    SYNTAX  MacAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Indicate the mask to be logical-ANDed with the
        learned  address  before  being compared to
        the value  in  the  rlMacBasePrioForceL3CosAddress  field."
    ::= { rlMacBasePrioForceL3CosEntry 2 }

rlMacBasePrioForceL3CosRowStatus OBJECT-TYPE
    SYNTAX   RowStatus
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { rlMacBasePrioForceL3CosEntry 3 }

rlMacBasePrioForceL3CosParamsTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlMacBasePrioForceL3CosParamsEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table holds the global parameters of
        the L3 cos :TC, UP,DSCP."
    ::= { rlMacBasePrio 5 }

rlMacBasePrioForceL3CosParamsEntry OBJECT-TYPE
    SYNTAX  RlMacBasePrioForceL3CosParamsEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        ""
    INDEX   { rlMacBasePrioForceL3CosParamsEntryIndex }
    ::= { rlMacBasePrioForceL3CosParamsTable 1 }

RlMacBasePrioForceL3CosParamsEntry ::=
    SEQUENCE {
        rlMacBasePrioForceL3CosParamsEntryIndex
            INTEGER,
        rlMacBasePrioForceL3CosParamsEntryTC
            INTEGER,
        rlMacBasePrioForceL3CosParamsEntryUP
            INTEGER,
        rlMacBasePrioForceL3CosParamsEntryDSCP
            INTEGER
    }

rlMacBasePrioForceL3CosParamsEntryIndex   OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Index of the ForceL3Cos parameters table."
    ::= { rlMacBasePrioForceL3CosParamsEntry 1 }

rlMacBasePrioForceL3CosParamsEntryTC   OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value of the globla TC"
    ::= { rlMacBasePrioForceL3CosParamsEntry 2 }

rlMacBasePrioForceL3CosParamsEntryUP   OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value of the globla UP"
    ::= { rlMacBasePrioForceL3CosParamsEntry 3 }

rlMacBasePrioForceL3CosParamsEntryDSCP   OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value of the globla DSCP"
    ::= { rlMacBasePrioForceL3CosParamsEntry 4 }

rlMacBasePrioSADATCEnable   OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This variable controlls the activation of SA/DA priority feature in Mac base
        priority"
    ::= { rlMacBasePrio 6 }

rlMacBasePrioSADATCTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RlMacBasePrioSADATCEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table that contains information about ranges
        of addresses that are used in the mac based ptiority
        with the ForceL3Cos feature."
    ::= { rlMacBasePrio 7 }

rlMacBasePrioSADATCEntry OBJECT-TYPE
    SYNTAX  RlMacBasePrioSADATCEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about ranges of  MAC addresses
        that are used in the mac based priority with
        the ForeL3Cos feature"
    INDEX   { rlMacBasePrioSADATCAddress,rlMacBasePrioSADATCMask }
    ::= { rlMacBasePrioSADATCTable 1 }

RlMacBasePrioSADATCEntry ::=
    SEQUENCE {
        rlMacBasePrioSADATCAddress
            MacAddress,
        rlMacBasePrioSADATCMask
            MacAddress,
        rlMacBasePrioSADATCPrio
            INTEGER,
        rlMacBasePrioSADATCRowStatus
            RowStatus
    }

rlMacBasePrioSADATCAddress OBJECT-TYPE
    SYNTAX  MacAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The range of address of this entry.
        The range may not hold MAC multicast addresses. "
    ::= { rlMacBasePrioSADATCEntry 1 }

rlMacBasePrioSADATCMask OBJECT-TYPE
    SYNTAX  MacAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Indicate the mask to be logical-ANDed with the
        learned  address  before  being compared to
        the value  in  the  rlMacBasePrioSADATCAddress  field."
    ::= { rlMacBasePrioSADATCEntry 2 }

    rlMacBasePrioSADATCPrio OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The priority that will assign to all MAC
        addresses that are match the range of this entry."
    ::= { rlMacBasePrioSADATCEntry 3 }

rlMacBasePrioSADATCRowStatus OBJECT-TYPE
    SYNTAX   RowStatus
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { rlMacBasePrioSADATCEntry 4 }

END