CISCOSB-POE-MIB

CISCOSB-POE-MIB DEFINITIONS ::= BEGIN

-- Title:               CISCOSB LOCALIZATION ROS
--                      This Private MIB is enhancement for rfc3621.txt - Power Ethernet Mib
-- Version:             7.41
-- Date:                28 Nov 2005

IMPORTS
    switch001                           FROM CISCOSB-MIB
    DisplayString, TruthValue           FROM SNMPv2-TC
    OBJECT-TYPE, MODULE-IDENTITY        FROM SNMPv2-SMI;


rlPoe    MODULE-IDENTITY
         LAST-UPDATED "200911260000Z"
		 ORGANIZATION "Cisco Small Business"

		 CONTACT-INFO
		 "Postal: 170 West Tasman Drive
		 San Jose , CA 95134-1706
		 USA

		 Website: Cisco Small Business Home http://www.cisco.com/smb>;,
		 Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

         DESCRIPTION
                "The private MIB module definition for Power Over Ethernet."
         REVISION "200911260000Z"
         DESCRIPTION
                "Initial revision."
        ::= { switch001 108 }

rlPethPsePortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RlPethPsePortEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        " The table listing additional information for Power Over Ethernet ports."
    ::= {rlPoe 1 }

rlPethPsePortEntry  OBJECT-TYPE
    SYNTAX      RlPethPsePortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " An entry in the rlPethPsePortTable."
    INDEX    { rlPethPsePortGroupIndex , rlPethPsePortIndex  }
    ::= {rlPethPsePortTable  1 }

RlPethPsePortEntry ::= SEQUENCE {
    rlPethPsePortGroupIndex             INTEGER,
    rlPethPsePortIndex                  INTEGER,
    rlPethPsePortOutputVoltage          INTEGER,
    rlPethPsePortOutputCurrent          INTEGER,
    rlPethPsePortOutputPower            INTEGER,
    rlPethPsePortPowerLimit             INTEGER,
    rlPethPsePortStatus                 INTEGER,
    rlPethPsePortStatusDescription      DisplayString,
    rlPethPsePortOperPowerLimit         INTEGER,
    rlPethPsePortSupportPoePlus         TruthValue,
    rlPethPsePortTimeRangeName          DisplayString,
    rlPethPsePortOperStatus             TruthValue,
    rlPethPsePortMaxPowerAllocAllowed   INTEGER
}

rlPethPsePortGroupIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable uniquely identifies the group
         containing the port to which a power Ethernet PSE is
         connected.  Group means box in the stack, module in a
         rack and the value 1 MUST be used for non-modular devices.
         Furthermore, the same value MUST be used in this variable,
         pethMainPseGroupIndex, and pethNotificationControlGroupIndex
         to refer to a given box in a stack or module in the rack."
    ::= { rlPethPsePortEntry 1 }

rlPethPsePortIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable uniquely identifies the power Ethernet PSE
         port within group pethPsePortGroupIndex to which the
         power Ethernet PSE entry is connected."
    ::= { rlPethPsePortEntry 2 }

rlPethPsePortOutputVoltage OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates on the output voltage level in milli volts from rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 3 }

rlPethPsePortOutputCurrent OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates on the output current level in milli amper from rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 4 }

rlPethPsePortOutputPower OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates on the output power level in milli watts from rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 5 }

rlPethPsePortPowerLimit OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 6 }

rlPethPsePortStatus OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates on the hardware status of rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 7 }

rlPethPsePortStatusDescription OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..80))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates the description of the hardware status of rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 8 }

rlPethPsePortOperPowerLimit OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 9 }

rlPethPsePortSupportPoePlus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates if the port supports poe plus."
    ::= { rlPethPsePortEntry 10 }

rlPethPsePortTimeRangeName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable is used to bind PoE port to time range."
    ::= { rlPethPsePortEntry 11 }

rlPethPsePortOperStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status."
    ::= { rlPethPsePortEntry 12 }

rlPethPsePortMaxPowerAllocAllowed OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex."
    ::= { rlPethPsePortEntry 13 }

rlPethMainPseTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RlPethMainPseEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        " The table listing additional read - only information for Power Over Ethernet."
    ::= {rlPoe 2 }

rlPethMainPseEntry  OBJECT-TYPE
    SYNTAX      RlPethMainPseEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " An entry in the rlPethMainPseTable."
    INDEX    { rlPethMainPseGroupIndex }
    ::= {rlPethMainPseTable  1 }

RlPethMainPseEntry ::= SEQUENCE {
    rlPethMainPseGroupIndex          INTEGER,
    rlPethMainPseSwVersion           DisplayString,
    rlPethMainPseHwVersion           DisplayString,
    rlPethMainPseHwType              INTEGER,
    rlPethMainPsePowerGuardBand      INTEGER

}

rlPethMainPseGroupIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This variable uniquely identifies the group
         containing the port to which a power Ethernet PSE is
         connected.  Group means box in the stack, module in a
         rack and the value 1 MUST be used for non-modular devices.
         Furthermore, the same value MUST be used in this variable,
         pethMainPseGroupIndex, and pethNotificationControlGroupIndex
         to refer to a given box in a stack or module in the rack."
    ::= { rlPethMainPseEntry 1 }

rlPethMainPseSwVersion OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable identifies the MCU SW version."
    ::= { rlPethMainPseEntry 2 }

rlPethMainPseHwVersion OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable identifies the MCU HW version."
    ::= { rlPethMainPseEntry 3 }

rlPethMainPseHwType OBJECT-TYPE
    SYNTAX  INTEGER {
        enhanced(1),
        plus(2),
        auto(3),
        nonPoe(4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable identifies the MCU HW type (enhanced, plus, none)."
    ::= { rlPethMainPseEntry 4 }

rlPethMainPsePowerGuardBand OBJECT-TYPE
    SYNTAX      INTEGER (0..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This variable identifies the guard band in [W] for not connecting
         additional ports."
    ::= { rlPethMainPseEntry 5 }

rlPethPowerPseTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RlPethPowerPseEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        " The table listing additional read-write information for Power Over Ethernet."
    ::= {rlPoe 3 }

rlPethPowerPseEntry  OBJECT-TYPE
    SYNTAX      RlPethPowerPseEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        " An entry in the rlPethPowerPseTable."
    INDEX    { rlPethPowerPseGroupIndex }
    ::= {rlPethPowerPseTable  1 }

RlPethPowerPseEntry ::= SEQUENCE {
    rlPethPowerPseGroupIndex          INTEGER,
    rlPethPowerPsePower               INTEGER,
    rlPethPowerPseRpsPower            INTEGER,
    rlPethPowerPsePowerManagementMode INTEGER,
    rlPethPowerPsedisconnectMethod    INTEGER
}

rlPethPowerPseGroupIndex OBJECT-TYPE
    SYNTAX      INTEGER (1..8)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This variable uniquely identifies the group
         containing the port to which a power Ethernet PSE is
         connected.  Group means box in the stack, module in a
         rack and the value 1 MUST be used for non-modular devices.
         Furthermore, the same value MUST be used in this variable,
         PethPowerPseGroupIndex, and pethNotificationControlGroupIndex
         to refer to a given box in a stack or module in the rack."
    ::= { rlPethPowerPseEntry 1 }

rlPethPowerPsePower OBJECT-TYPE
    SYNTAX      INTEGER {
        none(0),
        ps1(1),
        ps2(2),
        ps3(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable identifies the maximum power in [W] supplied by PSE."
    ::= { rlPethPowerPseEntry 2 }

rlPethPowerPseRpsPower OBJECT-TYPE
    SYNTAX      INTEGER {
        none(0),
        rps1(1),
        rps2(2),
        rps3(3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable identifies the maximum power in [W] supplied by PSE + RPS."
    ::= { rlPethPowerPseEntry 3 }

rlPethPowerPsePowerManagementMode OBJECT-TYPE
    SYNTAX      INTEGER {
        portlimit(0),
        classlimit(5)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable identifies power management mode."
    ::= { rlPethPowerPseEntry 4 }


rlPethPowerPsedisconnectMethod OBJECT-TYPE
    SYNTAX      INTEGER {
        lowestpriority(0),
        nextport(1)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This variable identifies disconnect method. "
    ::= { rlPethPowerPseEntry 5 }



END