CISCOSB-SSL

CISCOSB-SSL DEFINITIONS ::= BEGIN

-- Title:      CISCOSB Ssl Private Extension
-- Version:    7.35
-- Date:       20 Jan 2004

IMPORTS
    switch001                                        FROM CISCOSB-MIB
    Unsigned32, IpAddress,
    MODULE-IDENTITY, OBJECT-TYPE                FROM SNMPv2-SMI
    TruthValue, RowStatus, DisplayString,
    TEXTUAL-CONVENTION                          FROM SNMPv2-TC;

rlSsl MODULE-IDENTITY
        LAST-UPDATED "200309210000Z"
		ORGANIZATION "Cisco Small Business"

		CONTACT-INFO
		"Postal: 170 West Tasman Drive
		San Jose , CA 95134-1706
		USA

		Website: Cisco Small Business Home http://www.cisco.com/smb>;,
		Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"

        DESCRIPTION
                "The private MIB module definition for SSL."
        REVISION "200309210000Z"
        DESCRIPTION
                "Added this MODULE-IDENTITY clause."
        ::= { switch001 100 }

rlSslCertificateGenerationTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlSslCertificateGenerationEntry
   MAX-ACCESS     not-accessible
   STATUS     current
   DESCRIPTION
    "This table is used for :
    1. generating keys and self signed certificate - saved in flash and RAM
    (not in configuration file)
    2. generating certificate requests - saved in RAM, can be read by
    rlSslCertificateExportTable
    3. generating self signed certificate - saved in flash and RAM (not in
    configuraion file)
    By setting rlSslCertificateGenerationAction to the appropriate
    value this action takes place. The other fields of this table are used for
    each of this actions"
    ::= { rlSsl 1 }

rlSslCertificateGenerationEntry  OBJECT-TYPE
   SYNTAX RlSslCertificateGenerationEntry
   MAX-ACCESS   not-accessible
   STATUS       current
   DESCRIPTION
       " The row definition for this table."
   INDEX {  rlSslCertificateGenerationIndex }
   ::= { rlSslCertificateGenerationTable 1 }

RlSslCertificateGenerationEntry ::= SEQUENCE {
  rlSslCertificateGenerationIndex                   INTEGER,
  rlSslCertificateGenerationId                      INTEGER,
  rlSslCertificateGenerationCountryName             DisplayString,
  rlSslCertificateGenerationStateOrProvinceName     DisplayString,
  rlSslCertificateGenerationLocalityName            DisplayString,
  rlSslCertificateGenerationOrganizationName        DisplayString,
  rlSslCertificateGenerationOrganizationUnitName    DisplayString,
  rlSslCertificateGenerationCommonName              DisplayString,
  rlSslCertificateGenerationValidDays               INTEGER,
  rlSslCertificateGenerationRsaKeyLength            INTEGER,
  rlSslCertificateGenerationPassphrase              DisplayString,
  rlSslCertificateGenerationAction                  INTEGER
}

rlSslCertificateGenerationIndex   OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS   read-write
   STATUS current
   DESCRIPTION
    "This index is always set to 1 no matter for which certificate or
    certificate request the action refers to."
     ::=  { rlSslCertificateGenerationEntry  1 }

rlSslCertificateGenerationId   OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS   read-write
   STATUS current
   DESCRIPTION
    "The device can hold a number of keys/certificates/certificate requests.
    These certificates are always numbered from 1 to N (maximum number of
    certificates in device). This field decides to which
    keys/certificates/certificate requests the action refers."
     ::=  { rlSslCertificateGenerationEntry  2 }


rlSslCertificateGenerationCountryName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(2))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Value of country name field that will appear when a new certificate
        request or self signed certificate is generated."
    ::= { rlSslCertificateGenerationEntry   3 }

rlSslCertificateGenerationStateOrProvinceName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..64))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Value of state or province name field that will appear when a new
        certificate or self signed certificate is generated."
    ::= { rlSslCertificateGenerationEntry   4 }


rlSslCertificateGenerationLocalityName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..64))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Value of locality field that will appear when a new certificate or
        self signed certificate is generated."
    ::= { rlSslCertificateGenerationEntry   5 }


rlSslCertificateGenerationOrganizationName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..64))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Value of organization field that will appear when a new certificate or
        self signed certificate is generated."
    ::= { rlSslCertificateGenerationEntry   6 }

rlSslCertificateGenerationOrganizationUnitName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..64))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Value of organization field that will appear when a new certificate or
        self signed certificate is generated."
    ::= { rlSslCertificateGenerationEntry   7 }

rlSslCertificateGenerationCommonName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..64))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Value of common name field that will appear when a new certificate or
        self signed certificate is generated."
    ::= { rlSslCertificateGenerationEntry   8 }

rlSslCertificateGenerationValidDays OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "When generating self signed certificate this field sets the valid fields.
        'Valid from' is current GMT and 'valid to' current GMT + the value of
        this field."
    ::= { rlSslCertificateGenerationEntry   9 }

rlSslCertificateGenerationRsaKeyLength OBJECT-TYPE
    SYNTAX  INTEGER (512..2048)
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "Setting the RSA key size that will be created when a new key is generated -
         generateRsaKeyAndSelfSignedCertificate"
    ::= { rlSslCertificateGenerationEntry   10 }

rlSslCertificateGenerationPassphrase OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When a RSA key is generated (generateRsaKeyAndSelfSignedCertificate)
        this passphrase is saved in flash and when the time comes and the
        certificate and the key are exported in PKCS12 format this passphrase
        is used to encrypt it. If the passphrase is empty the key and
        certificate can not be exported. There is no method of obtaining this
        passphrase once a key was generated."
    ::= { rlSslCertificateGenerationEntry   11 }


rlSslCertificateGenerationAction OBJECT-TYPE
    SYNTAX  INTEGER {
       generateRsaKeyAndSelfSignedCertificate(1),
       generateSelfSignedCertificate(2),
       generatePkcs12(3),
       generateCertificateRequest(4)
     }
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "Setting to a regenerateCertificate causes a new certificate to be
        generated and to be used for all new sessions."
    ::= { rlSslCertificateGenerationEntry   12 }




rlSslCertificateExportTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlSslCertificateExportEntry
   MAX-ACCESS     not-accessible
   STATUS     current
   DESCRIPTION
    "This table is used for viewing saved data from RAM and flash."
    ::= { rlSsl 2 }

rlSslCertificateExportEntry  OBJECT-TYPE
   SYNTAX RlSslCertificateExportEntry
   MAX-ACCESS   not-accessible
   STATUS       current
   DESCRIPTION
       " The row definition for this table."
   INDEX {     rlSslCertificateExportId,
               rlSslCertificateExportType,
               rlSslCertificateExportFragmentId }
   ::= { rlSslCertificateExportTable 1 }

RlSslCertificateExportEntry ::= SEQUENCE {
  rlSslCertificateExportId              INTEGER,
  rlSslCertificateExportType            INTEGER,
  rlSslCertificateExportFragmentId      INTEGER,
  rlSslCertificateExportFragmentText    OCTET STRING
}

rlSslCertificateExportId     OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS   read-only
   STATUS current
   DESCRIPTION
    "Identifies the index of this certficate / certificate request the table holds."
     ::=  { rlSslCertificateExportEntry  1 }

rlSslCertificateExportType        OBJECT-TYPE
   SYNTAX INTEGER {
           certificateRequestPemFormat (1),
           certificatePemFormat(2),
           certificateOpenSslFormat(3),
           certificateAndKeyPkcs12(4)
     }
   MAX-ACCESS   read-only
   STATUS current
   DESCRIPTION
    "Identifies the type of data the current entry shows."
     ::=  { rlSslCertificateExportEntry  2 }

rlSslCertificateExportFragmentId   OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS   read-only
   STATUS current
   DESCRIPTION
    "Identifies the index of this fragment in the certificate request."
     ::=  { rlSslCertificateExportEntry  3 }

rlSslCertificateExportFragmentText    OBJECT-TYPE
   SYNTAX OCTET STRING
   MAX-ACCESS   read-only
   STATUS current
   DESCRIPTION
    "A part of the readable text entry for the certificate request."
     ::=  { rlSslCertificateExportEntry  4 }



rlSslCertificateSave OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "Saves data from rlSslCertificateImportTable to RAM and flash. When
        an external certificate should be copied to the device first we copy
        it to rlSslCertificateImportTable and then this scalar is set to the
        certificate id that we want to save -
        1. All entries in rlSslCertificateImportTable that have this id and
        their format is equal to the current value of rlSslCertificateSaveFormat
        are concatenated.
        2. If the imported certificate format is .. - section 1 result
        is validated against the key with the same index. If validation fails
        for any reason - the certificate is not saved and the setting this
        scalar fails.
        3. If the imported certificate format is PKCS12 - section1 result is
        decrypted using rlSslImportedPKCS12CertificatePassphrase current value.
        If decryption fails for any reason the PKCS12 certificate and key are
        not saved to FLASH and setting this scalar fails."
    ::= { rlSsl  3 }

rlSslCertificateSaveFormat OBJECT-TYPE
    SYNTAX  INTEGER{
            x509 (1),
            pkcs12(2)
        }
    MAX-ACCESS      read-write
    STATUS      current
    DESCRIPTION
        "."
    ::= { rlSsl  4 }

rlSslImportedPKCS12CertificatePassphrase OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(8..96))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "."
    ::= { rlSsl  5 }


rlSslCertificateImportTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlSslCertificateImportEntry
   MAX-ACCESS     not-accessible
   STATUS     current
   DESCRIPTION
    "This table is used for copying an external certificate to the device -
    see rlSslCertificateSave"
    ::= { rlSsl 6 }

rlSslCertificateImportEntry  OBJECT-TYPE
   SYNTAX RlSslCertificateImportEntry
   MAX-ACCESS   not-accessible
   STATUS       current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rlSslCertificateImportId,
           rlSslCertificateImportFormat,
           rlSslCertificateImportFragmentId}
   ::= { rlSslCertificateImportTable 1 }

RlSslCertificateImportEntry ::= SEQUENCE {
  rlSslCertificateImportId              INTEGER,
  rlSslCertificateImportFormat          INTEGER,
  rlSslCertificateImportFragmentId      INTEGER,
  rlSslCertificateImportFragmentText    OCTET STRING,
  rlSslCertificateImportFragmentStatus  RowStatus
}

rlSslCertificateImportId   OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS   read-write
   STATUS current
   DESCRIPTION
    "The certificate ID."
     ::=  { rlSslCertificateImportEntry  1 }

rlSslCertificateImportFormat   OBJECT-TYPE
   SYNTAX INTEGER {
            x509 (1),
            pkcs12(2)
           }

   MAX-ACCESS   read-write
   STATUS current
   DESCRIPTION
    "."
     ::=  { rlSslCertificateImportEntry  2 }


rlSslCertificateImportFragmentId   OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS   read-write
   STATUS current
   DESCRIPTION
    "Identifies the index of this fragment in the certificate."
     ::=  { rlSslCertificateImportEntry  3 }


rlSslCertificateImportFragmentText    OBJECT-TYPE
   SYNTAX OCTET STRING
   MAX-ACCESS   read-write
   STATUS current
   DESCRIPTION
    "A part of the readable text entry for the certificate."
     ::=  { rlSslCertificateImportEntry  4 }

rlSslCertificateImportFragmentStatus    OBJECT-TYPE
   SYNTAX RowStatus
   MAX-ACCESS   read-write
   STATUS current
   DESCRIPTION
    ""
     ::=  { rlSslCertificateImportEntry  5 }


 rlSslSSLv2Enable OBJECT-TYPE
    SYNTAX      INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "if enabled then SSLv2 will be supported , if disabled SSLv2 won't be supported.
         only SSLV3 and TSL1.
         Note: disabling SSLv2 is more secure."
     ::= { rlSsl 7 }

END