CTRON-SFPS-COMMON-MIB

CTRON-SFPS-COMMON-MIB DEFINITIONS ::= BEGIN

--  sfps-common-mib.txt
--  Revision: 0.0.13
--              
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services MIB.
--
--  This module will be extended, as required.
--

--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

 
IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB
--      enterprises,
--      IpAddress, 
--      Counter, Gauge, 
--      TimeTicks
--              FROM RFC1155-SMI

--  These Objects are defined in the file sfps-inc.mib.txt.0.0.2
         sfpsSystemGenerics, sfpsDiagEventLog, sfpsAOProperties,
         sfpsAOPropertiesAPI
        
        
                FROM CTRON-SFPS-INCLUDE-MIB;

--  Textual Conventions

HexInteger ::= INTEGER
--  display this integer in hex format



--  SFPS Switch Generics Group

sfpsGenericVersionTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsGenericVersionEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Table describing the SFS generics and their versions
                that are contained within this image." 
        ::= { sfpsSystemGenerics 1 }

sfpsGenericVersionEntry    OBJECT-TYPE
        SYNTAX  SfpsGenericVersionEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "An entry in the table instanced by the Generic name."
        INDEX   { sfpsGenericVersionHash }
        ::= { sfpsGenericVersionTable 1 }

SfpsGenericVersionEntry ::=

SEQUENCE {
                sfpsGenericVersionHash     INTEGER,
                sfpsGenericVersionName     DisplayString,
                sfpsGenericVersionVersion  DisplayString,
                sfpsGenericVersionMIBRev   DisplayString
         }

sfpsGenericVersionHash    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Hash of the name to make it a unique entry." 
        ::= { sfpsGenericVersionEntry 1 }

sfpsGenericVersionName     OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Name of the Generic." 
        ::= { sfpsGenericVersionEntry 2 }

sfpsGenericVersionVersion      OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Version stamp of the generic component."
        ::= { sfpsGenericVersionEntry 3 }

sfpsGenericVersionMIBRev      OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "MIB version of the generic component."
        ::= { sfpsGenericVersionEntry 4 }

 
--  SFPS Diagnostics Group                              (Experiment)
--  This group contains the objects that pertain to the SFPS Diagnostics group.

--  SFPS Diagnostic Event Logger Groups                 (Experiment)
--  This group contains the objects that pertain to the Event Logger
--  of the Diagnostics group.

 
sfpsDiagLogConfigTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsDiagLogConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the informtion to configure an
                 Event Logger object."
        ::= { sfpsDiagEventLog 1 }

sfpsDiagLogConfigEntry    OBJECT-TYPE
        SYNTAX  SfpsDiagLogConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains configuration data."
        INDEX   { sfpsDiagLogConfigInstance } 
        ::= { sfpsDiagLogConfigTable 1 }

SfpsDiagLogConfigEntry ::=
        SEQUENCE {
                sfpsDiagLogConfigInstance               INTEGER,  
                sfpsDiagLogConfigStatus                 INTEGER,  
                sfpsDiagLogConfigIndex                  INTEGER,  
                sfpsDiagLogConfigStart                  INTEGER,  
                sfpsDiagLogConfigStop                   INTEGER,  
                sfpsDiagLogConfigLogIndex               INTEGER,  
                sfpsDiagLogConfigFilterMatch            INTEGER,  
                sfpsDiagLogConfigFilterStart            INTEGER,  
                sfpsDiagLogConfigFilterStop             INTEGER,  
                sfpsDiagLogAccessPortControl            HexInteger,  
                sfpsDiagLogCallIdleTime         INTEGER,  
                sfpsDiagLogFilterAddTimer               INTEGER,  
                sfpsDiagLogRedirectorWakeup             INTEGER,  
                sfpsDiagLogRedirectorNumPackets         INTEGER,
                sfpsDiagLogEndSystemTimeout             INTEGER,
                sfpsDiagLogSwitchIdleInterval           INTEGER,
                sfpsDiagLogInlnFltrAgeTime                      INTEGER,  
                sfpsDiagLogConfigDebug9                 INTEGER, 
                sfpsDiagLogSignalThrottle               INTEGER, 
                sfpsDiagLogConfigOther                  INTEGER, 
                sfpsDiagLogConfigSoftReset              INTEGER, 
                sfpsDiagLogConfigSFPSVlan               INTEGER 
        }  


sfpsDiagLogConfigInstance   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The instance of this Event Logger."
        ::= { sfpsDiagLogConfigEntry 1 }

sfpsDiagLogConfigStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),              
                        disabled(2),          
                        enabled(3)               
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The status of this Event Logger object."
        ::= { sfpsDiagLogConfigEntry 2 }

sfpsDiagLogConfigIndex   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The current index in the circular buffer where events are 
                 being logged."
        ::= { sfpsDiagLogConfigEntry 3 }

sfpsDiagLogConfigStart   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The starting index in the circular buffer to display."
        ::= { sfpsDiagLogConfigEntry 4 }

sfpsDiagLogConfigStop   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The last index in the circular buffer to display."
        ::= { sfpsDiagLogConfigEntry 5 }

sfpsDiagLogConfigLogIndex   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The current index in the log buffer where we are looking."
        ::= { sfpsDiagLogConfigEntry 6 }

sfpsDiagLogConfigFilterMatch   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The specified Event Id to log. A value of 0 will 
                 cause every event to be logged."
        ::= { sfpsDiagLogConfigEntry 7 }

sfpsDiagLogConfigFilterStart   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The beginning range of Event Ids to log."
        ::= { sfpsDiagLogConfigEntry 8 }

sfpsDiagLogConfigFilterStop   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The ending range of Event Ids to log."
        ::= { sfpsDiagLogConfigEntry 9 }

sfpsDiagLogAccessPortControl   OBJECT-TYPE
        SYNTAX  HexInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set a port bit mask. This bit mask
                 represents which ports shall be statically set to be
                 an ACCESS port. Bit 0 corresponds to Port 1."
        DEFVAL { 0 }
        ::= { sfpsDiagLogConfigEntry 10 }

sfpsDiagLogCallIdleTime   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set a debug variable. (in seconds)"
        DEFVAL { 60 }
        ::= { sfpsDiagLogConfigEntry 11 }

sfpsDiagLogFilterAddTimer   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set how long a filter connection
                 should be (Default : 900 seconds)"
        DEFVAL { 900 }
        ::= { sfpsDiagLogConfigEntry 12 }

sfpsDiagLogRedirectorWakeup   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set how often the Redirector
                 wakes up to service the queue (in seconds)"
        ::= { sfpsDiagLogConfigEntry 13 }

sfpsDiagLogRedirectorNumPackets   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set how many packets the
                 Redirector reads off at a time."
        DEFVAL { 64 }
        ::= { sfpsDiagLogConfigEntry 14 }

sfpsDiagLogEndSystemTimeout   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set a debug variable. (Default : 
                 10 minutes) (in seconds)"
        DEFVAL { 600 }
        ::= { sfpsDiagLogConfigEntry 15 }

sfpsDiagLogSwitchIdleInterval   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set a debug variable. (in seconds)"
        DEFVAL { 30 }
        ::= { sfpsDiagLogConfigEntry 16 }

sfpsDiagLogInlnFltrAgeTime   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set the BAF age time (seconds)."
        ::= { sfpsDiagLogConfigEntry 17 }

sfpsDiagLogConfigDebug9   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set a debug variable."
        ::= { sfpsDiagLogConfigEntry 18 }

sfpsDiagLogSignalThrottle   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Leaf to be used to set the Signal Thottle knob.
                 Throttling defaults to off. By setting it to
                 1,2,5, or 10 one can dictate the rate (signal/second)
                 at which SFPS sends signals to the ACMS Signal Stack.."
        ::= { sfpsDiagLogConfigEntry 19 }

sfpsDiagLogConfigOther   OBJECT-TYPE
        SYNTAX  INTEGER {
                        string(1),              
                        integer(2)          
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Dictates the format of the Event to be displayed (either 
                 Text or Integer values)."
        ::= { sfpsDiagLogConfigEntry 20 }

sfpsDiagLogConfigSoftReset   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsDiagLogConfigEntry 21 }

sfpsDiagLogConfigSFPSVlan   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsDiagLogConfigEntry 22 }

-- AO Properties Table

sfpsAOPropertiesTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsAOPropertiesEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOProperties 1 }

sfpsAOPropertiesEntry    OBJECT-TYPE
        SYNTAX  SfpsAOPropertiesEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "An entry in the table instanced by the tag."
        INDEX   { sfpsAOPropertiesTag }
        ::= { sfpsAOPropertiesTable 1 }

SfpsAOPropertiesEntry ::=

        SEQUENCE {
                sfpsAOPropertiesTag         INTEGER,
                sfpsAOPropertiesTagDescriptor   OCTET STRING,
                sfpsAOPropertiesPrettyType  OCTET STRING,
                sfpsAOPropertiesNumBytes    INTEGER,
                sfpsAOPropertiesIsLimit     INTEGER,
                sfpsAOPropertiesIsMobile    INTEGER,
                sfpsAOPropertiesIsSingle    INTEGER,
                sfpsAOPropertiesNoBlock     INTEGER,
                sfpsAOPropertiesNoDelta     INTEGER
         }

sfpsAOPropertiesTag    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 1 }

sfpsAOPropertiesTagDescriptor    OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 2 }

sfpsAOPropertiesPrettyType    OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 3 }

sfpsAOPropertiesNumBytes    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 4 }

sfpsAOPropertiesIsLimit    OBJECT-TYPE
        SYNTAX  INTEGER {
                false(1),
                true(2)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 5 }

sfpsAOPropertiesIsMobile    OBJECT-TYPE
        SYNTAX  INTEGER {
                false(1),
                true(2)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 6 }

sfpsAOPropertiesIsSingle    OBJECT-TYPE
        SYNTAX  INTEGER {
                false(1),
                true(2)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 7 }

sfpsAOPropertiesNoBlock    OBJECT-TYPE
        SYNTAX  INTEGER {
                false(1),
                true(2)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 8 }

sfpsAOPropertiesNoDelta    OBJECT-TYPE
        SYNTAX  INTEGER {
                false(1),
                true(2)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesEntry 9 }

-- AO Properties API

sfpsAOPropertiesAPITag    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 1 }

sfpsAOPropertiesAPITagString    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 2 }

sfpsAOPropertiesAPIPrettyType    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 3 }

sfpsAOPropertiesAPINumBytes    OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 4 }

sfpsAOPropertiesAPIIsLimit    OBJECT-TYPE
        SYNTAX  INTEGER {
                notSet(1),
                false(2),
                true(3)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 5 }

sfpsAOPropertiesAPIIsMobile    OBJECT-TYPE
        SYNTAX  INTEGER {
                notSet(1),
                false(2),
                true(3)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 6 }

sfpsAOPropertiesAPIIsSingle    OBJECT-TYPE
        SYNTAX  INTEGER {
                notSet(1),
                false(2),
                true(3)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 7 }

sfpsAOPropertiesAPINoBlock    OBJECT-TYPE
        SYNTAX  INTEGER {
                notSet(1),
                false(2),
                true(3)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 8 }

sfpsAOPropertiesAPINoDelta    OBJECT-TYPE
        SYNTAX  INTEGER {
                notSet(1),
                false(2),
                true(3)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 9 }

sfpsAOPropertiesAPIAction    OBJECT-TYPE
        SYNTAX  INTEGER {
                readProperties(1),
                setProperties(2)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "" 
        ::= { sfpsAOPropertiesAPI 10 }

END