CTTRAPLOG-MIB

CTTRAPLOG-MIB  DEFINITIONS ::= BEGIN

--  cttraplog-mib.txt
--  Revision: 01.00.02
--  Part Number:
--  Date: July 17, 1998

--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for Cabletron's
--  enterprise-specific trap log mib.
--
--  This module will be extended, as required.
--

--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.

--  Copyright July 1998 Cabletron Systems

--  PLEASE NOTE: All groups in this mib are optional

        IMPORTS 
                DisplayString
                        FROM RFC1213-MIB
                Counter, TimeTicks
                        FROM RFC1155-SMI
                OBJECT-TYPE
                        FROM RFC-1212 
                ctTrapLog
                        FROM CTRON-MIB-NAMES;

        totalNumberOfEntries  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "Total number of logged entries for this chassis."
            ::= { ctTrapLog 1 }

        configTable  OBJECT-TYPE 
            SYNTAX  SEQUENCE OF ConfigTableEntry
            ACCESS  not-accessible
            STATUS  mandatory
            ::= { ctTrapLog 2 }

        configTableEntry  OBJECT-TYPE 
            SYNTAX  ConfigTableEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION  
                    "Each entry allows a user to configure the alarm table
                    for a specific slot. Objects such as Current Entry,
                    MaxEntries Allowed, and an Enable/Disable switch are
                    available."
            INDEX   { slotInChassis }
            ::= { configTable 1 }

        ConfigTableEntry ::=
            SEQUENCE { 
                slotInChassis
                    INTEGER,
                numEntriesLoggeds
                    Counter,
                numEntriesRequested
                    INTEGER,
                numEntriesAllocated
                    INTEGER,
                lastLoggedEntryLogId
                    INTEGER,
                logCommand
                    INTEGER,
                wrap
                    INTEGER
            }

        slotInChassis  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "Each Slot can be separately configured. This is the
                    slot number for the configuration entry. "
            ::= { configTableEntry 1 }

        numEntriesLoggeds  OBJECT-TYPE 
            SYNTAX  Counter
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is the total number of entries looged for this
                    slot."
            ::= { configTableEntry 2 }

        numEntriesRequested  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION  
                    "Maximum number of entries to store before wrapping
                    the log on this slot."
            ::= { configTableEntry 3 }

        numEntriesAllocated  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is the number of entries allocated to log alarms
                    on this slot. It will always be less than or equal
                    to the requested number of entries."
            ::= { configTableEntry 4 }

        lastLoggedEntryLogId  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is the log id of the last entry logged for this
                    slot."
            ::= { configTableEntry 5 }

        logCommand  OBJECT-TYPE 
            SYNTAX  INTEGER {
                        clearLog (1)
                    }
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION  
                    "Allows the user to send the log the commands
                    specified in the enumeration."
            ::= { configTableEntry 6 }

        wrap  OBJECT-TYPE 
            SYNTAX  INTEGER 
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is whether or not this configuration has
                    wrapped or not."
            ::= { configTableEntry 7 }

        trapLogTable  OBJECT-TYPE 
            SYNTAX  SEQUENCE OF TrapLogEntry
            ACCESS  not-accessible
            STATUS  mandatory
            ::= { ctTrapLog 3 }

        trapLogEntry  OBJECT-TYPE 
            SYNTAX  TrapLogEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION  
                    "Each alarm entry is generated from one of the
                    following sources; (1) a module in one of the main
                    chassis slots, (2) the EM, (3) or a power supply. "
            INDEX   { slotChassis,
                      logId }
            ::= { trapLogTable 1 }

        TrapLogEntry ::=
            SEQUENCE { 
                logId
                    INTEGER,
                nvmpId
                    INTEGER,
                trapLogAcknowledged
                    INTEGER,
                trapLogVarBind
                    OCTET STRING,
                trapLogDescription
                    DisplayString,
                timeLogged
                    TimeTicks,
                filterId
                    INTEGER,
               slotChassis
                    INTEGER,
               trapOID
                    OBJECT IDENTIFIER,
                z80Time
                    TimeTicks
            }

        logId  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "Each slot has a maximium number of log entries that it
                    can support. Each entry is assigned a monotonically
                    increasing sequence number. When the maximum number
                    of entries for a slot is reached, the log wraps. Each
                    new entry will replace the oldest entry for that slot."
            ::= { trapLogEntry 1 }

        nvmpId  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This contains the nvmp id of the trap that occurred."
            ::= { trapLogEntry 2 }

        trapLogAcknowledged  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This field is set to 2 if a trap as been acknowledged
                    from the EM."
            ::= { trapLogEntry 3 }

        trapLogVarBind  OBJECT-TYPE 
            SYNTAX  OCTET STRING (SIZE (0..1500))
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is an ASN.1 encoded string representing the pairs
                    of OID/value items supplied in the original SNMP or
                    NVMP trap. "
            ::= { trapLogEntry 4 }

        trapLogDescription  OBJECT-TYPE 
            SYNTAX  DisplayString (SIZE (0..80))
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is an internally defined string used to describe
                    an alarm. Its primary use is for display on the EMs
                    LCD. A default value will be used for the old trap
                    calls."
            ::= { trapLogEntry 5 }

        timeLogged  OBJECT-TYPE 
            SYNTAX  TimeTicks
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "The time the entry was logged. This will be date and
                    time if possible."
            ::= { trapLogEntry 6 }

        filterId  OBJECT-TYPE 
            SYNTAX  INTEGER {
                        informational (1),
                        warning (2),
                        severe (3),
                        fatal (4),
                        existing (5)
                    }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This will be used to filter certain alarms. The
                    criteria is TBD. An example of classification:
                    informational - requires no intervention. warning -
                    Does not require immediate intervention. e.g. static
                    risk severe - Requires immediate intervention. e.g.
                    power overload. fatal - Requires attention and
                    module may take corrective action such as reboot. e.g.
                    Unrecoverable software or hardware error. "
            ::= { trapLogEntry 7 }

        slotChassis  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                    "Slot of this trap log."
            ::= { trapLogEntry 8 }

        trapOID  OBJECT-TYPE 
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This OID combines the General Trap code, Specific
                    Trap code, and the sys object id into one OID."
            ::= { trapLogEntry 9 }

        z80Time  OBJECT-TYPE 
            SYNTAX  TimeTicks
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is the time that the Z80 has been up for the 
                    board that sent this trap."
            ::= { trapLogEntry 10 }

        filterTable  OBJECT-TYPE 
            SYNTAX  SEQUENCE OF FilterEntry
            ACCESS  not-accessible
            STATUS  mandatory
            ::= { ctTrapLog 4 }

        filterEntry  OBJECT-TYPE 
            SYNTAX  FilterEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION  
                    "Each filter entry is generated from one of the
                    following sources; (1) a module in one of the main
                    chassis slots, (2) the EM, (3) or a power supply. "
            INDEX   { filterSlotInChassis,
                      filterFilterId,
                      filterLogId }
            ::= { filterTable 1 }

        FilterEntry ::=
            SEQUENCE { 
                filterLogId
                    INTEGER,
                filterNvmpId
                    INTEGER,
                filterTrapLogAcknowledged
                    INTEGER,
                filterTrapLogVarBind
                    OCTET STRING,
                filterTrapLogDescription
                    DisplayString,
                filterTimeLogged
                    TimeTicks,
                filterFilterId
                    INTEGER,
                filterSlotInChassis
                    INTEGER,
                filterTrapOID
                    OBJECT IDENTIFIER,
                filterZ80Time
                    TimeTicks
            }

        filterLogId  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "Each slot has a maximum number of log entries that it
                    can support. Each entry is assigned a monotonically
                    increasing sequence number. When the maximum number of
                    entries for a slot is reached, the log wraps. Each new
                    entry willreplace the oldest entry for that slot."
            ::= { filterEntry 1 }

        filterNvmpId  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This contains the nvmp id of the trap that was 
                    generated."
            ::= { filterEntry 2 }

        filterTrapLogAcknowledged  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This field is non-zero if a trap has been acknowleged
                    from the EM."
            ::= { filterEntry 3 }

        filterTrapLogVarBind  OBJECT-TYPE 
            SYNTAX  OCTET STRING (SIZE (0..1500))
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is an ASN.1 encoded string representing the pairs
                    of OID/value items supplied in the original SNMP or
                    NVMP trap."
            ::= { filterEntry 4 }

        filterTrapLogDescription  OBJECT-TYPE 
            SYNTAX  DisplayString (SIZE (0..80))
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This is an internally defined string used to
                    describe an alarm. It's primary use is for display
                    on the EMs LCD. A default value will be used for 
                    the old trap calls."
            ::= { filterEntry 5 }

        filterTimeLogged  OBJECT-TYPE 
            SYNTAX  TimeTicks
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "The time the entry was logged. This will be date
                    and time if possible."
            ::= { filterEntry 6 }

        filterFilterId  OBJECT-TYPE 
            SYNTAX  INTEGER {
                        informational (1),
                        warning (2),
                        severe (3),
                        fatal (4),
                        existing (5)
                    }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This will be used tofilter certain alarms. The
                    criteria is TBD. An example of classification:
                    informational-requires no intervention. warning - 
                    Does not require immediate intervention. e.g. 
                    statis risk severe - Requires immediate 
                    intervention. e.g. power overload. fatal - 
                    Requires attention and module may take
                    corrective action such as reboot. e.g. Unrecoverale
                    software or hardware error."
            ::= { filterEntry 7 }

        filterSlotInChassis  OBJECT-TYPE 
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "Slot of this filter entry."
            ::= { filterEntry 8 }

        filterTrapOID  OBJECT-TYPE 
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "This OID combines the General Trap code, Specific
                    Trap code, and the sys object id into one OID."
            ::= { filterEntry 9 }

        filterZ80Time  OBJECT-TYPE 
            SYNTAX  TimeTicks
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION  
                    "The number of time ticks that have passed since
                    this boards Z80 processor has been up."
            ::= { filterEntry 10 }


       trapLoggerAgent  OBJECT-TYPE 
            SYNTAX  INTEGER {
                disabled(1),
                enabled(2),
                standby(3),
                elected(4)
                }
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION  
                    "Reflects the operational status of the traplogger agent"
        ::= { ctTrapLog 5 }
        
END