FORTINET-MIB-280

--
-- MODULE-IDENTITY
--  OrgName
--    Fortinet, Inc.
--  ContactInfo
--     Technical Support
--     e-mail: support@fortinet.com
--     http://www.fortinet.com
--

FORTINET-MIB-280 DEFINITIONS ::= BEGIN
	IMPORTS
		DisplayString
			FROM SNMPv2-TC
		MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, 
		enterprises, IpAddress
			FROM SNMPv2-SMI;

	--
	-- Textual conventions --
	--

	FnBoolState ::= INTEGER { 
		disabled ( 1 ),
		enabled  ( 2 )
	} 

	FnIndex ::= INTEGER (
		0 .. 2147483647
	)

	FnOpMode ::= INTEGER { 
		nat         ( 1 ),
		transparent ( 2 )
	}

	FnHaMode ::= INTEGER {
		standalone     ( 1 ),
		active-active  ( 2 ),
		active-passive ( 3 )
	}

	FnHaSchedule ::= INTEGER { 
		none                 ( 1 ),
		hub                  ( 2 ),
		least-connections    ( 3 ),
		round-robin          ( 4 ),
		weighted-round-robin ( 5 ),
		random               ( 6 ),
		ip-based             ( 7 ),
		ip-port-based        ( 8 )
	} 

	FnAdminPerm ::= INTEGER { 
		super-admin  ( 255 ),
		domain-admin ( 15 ),
		write-admin  ( 1 ),
		read-admin   ( 0 )
	} 

	FnUserAuth ::= INTEGER { 
		local           ( 1 ),
		radius-single   ( 2 ),
		radius-multiple ( 3 ),
		ldap            ( 4 )
	} 


	FnIfAddrMode ::= INTEGER  {
		static ( 1 )
		-- fixme --
	} 

	FnSessProto ::= INTEGER  {
		ip   ( 0 ) ,
		icmp ( 1 ) ,
		igmp ( 2 ) ,
		ipip ( 4 ) ,
		tcp  ( 6 ) , 
		egp  ( 8 ) ,
		pup  ( 12 ) ,				
		udp  ( 17 ) ,
		idp  ( 22 ) ,
		ipv6 ( 41 ) ,
		rsvp ( 46 ) ,
		gre  ( 47 ) ,
		esp  ( 50 ) ,
		ah   ( 51 ) ,
		ospf ( 89 ) ,
		pim  ( 103 ) ,
		comp ( 108 ) ,
		raw  ( 255 )
	}

	--
	--
	--

	fortinet        OBJECT IDENTIFIER ::=  { enterprises  12356 }

	fnSystem        OBJECT IDENTIFIER ::=  { fortinet  1 }
	fnDomains       OBJECT IDENTIFIER ::=  { fortinet  2 }
--	fnInterfaces    OBJECT IDENTIFIER ::=  { fortinet  3 }
	fnIp            OBJECT IDENTIFIER ::=  { fortinet  4 }
--	fnDhcp          OBJECT IDENTIFIER ::=  { fortinet  5 }
--	fnSnmp          OBJECT IDENTIFIER ::=  { fortinet  6 }
--	fnDns           OBJECT IDENTIFIER ::=  { fortinet  7 }
--	fnFirewall      OBJECT IDENTIFIER ::=  { fortinet  8 }
	fnVpn           OBJECT IDENTIFIER ::=  { fortinet  9 }
--	fnVip           OBJECT IDENTIFIER ::=  { fortinet  10 }
--	fnAntivirus     OBJECT IDENTIFIER ::=  { fortinet  11 }
	fnIps           OBJECT IDENTIFIER ::=  { fortinet  12 }
--	fnWebfilter     OBJECT IDENTIFIER ::=  { fortinet  13 }
--	fnAntispam      OBJECT IDENTIFIER ::=  { fortinet  14 }
	fnBridge        OBJECT IDENTIFIER ::=  { fortinet  15 }
	fnTraps         OBJECT IDENTIFIER ::=  { fortinet  0 }

	-- fnSystem

	fnSysModel          OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "System model number"
		::= { fnSystem    1 }

	fnSysSerial         OBJECT-TYPE
		SYNTAX          DisplayString  ( SIZE ( 0 .. 32  ) ) 
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Device serial number"
		::= { fnSystem    2 }

	fnSysVersion        OBJECT-TYPE
		SYNTAX          DisplayString  ( SIZE ( 0 .. 128 ) ) 
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Device firmware version"
		::= { fnSystem    3 }

	fnSysVersionAv      OBJECT-TYPE
		SYNTAX          DisplayString  ( SIZE ( 0 .. 128 ) ) 
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Antivirus DB version"
		::= { fnSystem    4 }

	fnSysVersionNids    OBJECT-TYPE
		SYNTAX          DisplayString  ( SIZE ( 0 .. 128 ) ) 
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "NIDS DB version"
		::= { fnSystem    5 }

	fnSysHaMode         OBJECT-TYPE
		SYNTAX          FnHaMode
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "High-availabilty mode (Standalone, A-A or A-P)"
		::= { fnSystem    6 }

	fnSysOpMode         OBJECT-TYPE
		SYNTAX          FnOpMode
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Operational mode (Transparent or Nat)"
		::= { fnSystem    7 }

	fnSysCpuUsage       OBJECT-TYPE
		SYNTAX          Gauge32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Instantaneous CPU usage"
		::= { fnSystem    8 }

	fnSysMemUsage       OBJECT-TYPE
		SYNTAX          Gauge32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Instantaneous memory utilization"
		::= { fnSystem    9 }

	fnSysSesCount       OBJECT-TYPE
		SYNTAX          Gauge32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Instantaneous session count"
		::= { fnSystem    10 }

	fnHa            OBJECT IDENTIFIER ::=  { fnSystem 100 }
	fnAdmin         OBJECT IDENTIFIER ::=  { fnSystem 101 }
	fnUsers         OBJECT IDENTIFIER ::=  { fnSystem 102 }
	fnOptions       OBJECT IDENTIFIER ::=  { fnSystem 103 }
	fnLogging       OBJECT IDENTIFIER ::=  { fnSystem 104 }
	fnMessages      OBJECT IDENTIFIER ::=  { fnSystem 105 }

	-- fnSystem . fnHa

	fnHaGroupId      OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "HA cluster group ID"
		::= { fnHa        1 }

	fnHaPriority     OBJECT-TYPE
		SYNTAX          INTEGER (0 .. 255)
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "HA clustering priority (default - 127)"
		::= { fnHa        2 }

	fnHaOverride     OBJECT-TYPE
		SYNTAX          FnBoolState
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Status of a master override flag"
		::= { fnHa        3 }

	fnHaAutoSync     OBJECT-TYPE
		SYNTAX          FnBoolState
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Status of an automatic configuration 
		                 synchronization"
		::= { fnHa        4 }

	fnHaSchedule     OBJECT-TYPE
		SYNTAX          FnHaSchedule
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Load-balancing schedule in A-A mode"
		::= { fnHa        5 }

	-- fnSystem . fnHa . fnHaStatusTable

	fnHaStatsTable  OBJECT-TYPE
        	SYNTAX     SEQUENCE OF FnHaStatsEntry
	        MAX-ACCESS not-accessible
        	STATUS     current
	        DESCRIPTION "HA cluster status"
        	::= { fnHa        6 }

	fnHaStatsEntry  OBJECT-TYPE
        	SYNTAX     FnHaStatsEntry
	        MAX-ACCESS not-accessible
        	STATUS     current
	        DESCRIPTION "Statistics for a particular HA cluster's unit"
	        INDEX       { fnHaStatsIndex }
        	::= { fnHaStatsTable 1 }

	FnHaStatsEntry ::= SEQUENCE {
		    fnHaStatsIndex			FnIndex,
		    fnHaStatsSerial			DisplayString,
		    fnHaStatsCpuUsage		Gauge32,
		    fnHaStatsMemUsage		Gauge32,
		    fnHaStatsNetUsage		Gauge32,
		    fnHaStatsSesCount		Gauge32,
		    fnHaStatsPktCount		Counter32,
		    fnHaStatsByteCount		Counter32,
		    fnHaStatsIdsCount		Counter32,
		    fnHaStatsAvCount		Counter32
        	}

	fnHaStatsIndex  OBJECT-TYPE
	        SYNTAX      FnIndex
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "An index value that uniquely identifies an
                	     unit in the HA Cluster"
        	::= { fnHaStatsEntry 1 }

	fnHaStatsSerial  OBJECT-TYPE
	        SYNTAX      DisplayString  ( SIZE ( 0 .. 32  ) )
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "Serial number of HA Cluster's unit"
        	::= { fnHaStatsEntry 2 }

	fnHaStatsCpuUsage  OBJECT-TYPE
	        SYNTAX      Gauge32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "CPU Usage of HA Cluster's unit"
        	::= { fnHaStatsEntry 3 }

	fnHaStatsMemUsage  OBJECT-TYPE
	        SYNTAX      Gauge32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "Memory Usage of HA Cluster's unit"
        	::= { fnHaStatsEntry 4 }

	fnHaStatsNetUsage  OBJECT-TYPE
	        SYNTAX      Gauge32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "Network Usage of HA Cluster's unit"
        	::= { fnHaStatsEntry 5 }

	fnHaStatsSesCount  OBJECT-TYPE
	        SYNTAX      Gauge32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "Sessions Counter of HA Cluster's unit"
        	::= { fnHaStatsEntry 6 }

	fnHaStatsPktCount  OBJECT-TYPE
	        SYNTAX      Counter32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "Packets Counter of HA Cluster's unit"
        	::= { fnHaStatsEntry 7 }

	fnHaStatsByteCount  OBJECT-TYPE
	        SYNTAX      Counter32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "Bytes Counter of HA Cluster's unit"
        	::= { fnHaStatsEntry 8 }

	fnHaStatsIdsCount  OBJECT-TYPE
	        SYNTAX      Counter32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "IDS Counter of HA Cluster's unit"
        	::= { fnHaStatsEntry 9 }

	fnHaStatsAvCount  OBJECT-TYPE
	        SYNTAX      Counter32
        	MAX-ACCESS  read-only
	        STATUS      current
        	DESCRIPTION "AV Counter of HA Cluster's unit"
        	::= { fnHaStatsEntry 10 }

	-- fnSystem . fnAdmin

	fnAdminNumber    OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "The number of admin accounts in fnAdminTable"
		::= { fnAdmin     1 }

	fnAdminTable     OBJECT-TYPE
		SYNTAX          SEQUENCE OF FnAdminEntry
		MAX-ACCESS      not-accessible
		STATUS          current
		DESCRIPTION     "A list of admin accounts"
		::= { fnAdmin     2 }

	fnAdminEntry     OBJECT-TYPE
		SYNTAX          FnAdminEntry
		MAX-ACCESS      not-accessible
		STATUS          current
		DESCRIPTION     "An entry containing information applicable
		                 to a particular admin account"
        INDEX          { fnAdminIndex }
		::= { fnAdminTable 1 }

	FnAdminEntry ::= SEQUENCE {
		fnAdminIndex   FnIndex,
		fnAdminName    DisplayString,
		fnAdminAddr    IpAddress,
		fnAdminMask    IpAddress,
		fnAdminPerm    FnAdminPerm
	}

	fnAdminIndex     OBJECT-TYPE
		SYNTAX          FnIndex
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "An index of admin account"
		::= { fnAdminEntry 1 }

	fnAdminName      OBJECT-TYPE
		SYNTAX          DisplayString
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "A username of an account"
		::= { fnAdminEntry 2 }

	fnAdminAddr      OBJECT-TYPE
		SYNTAX          IpAddress
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "An address of a subnet where this admin account
		                 can be used from"
		::= { fnAdminEntry 3 }

	fnAdminMask      OBJECT-TYPE
		SYNTAX          IpAddress
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "A mask of a subnet where this admin account
		                 can be used from"
		::= { fnAdminEntry 4 }

	fnAdminPerm      OBJECT-TYPE
		SYNTAX          FnAdminPerm
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Access level of this admin account"
		::= { fnAdminEntry 5 }

	-- fnSystem . fnUsers

	fnUserNumber    OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "The number of user accounts in fnUserTable"
		::= { fnUsers     1 }

	fnUserTable     OBJECT-TYPE
		SYNTAX          SEQUENCE OF FnUserEntry
		MAX-ACCESS      not-accessible
		STATUS          current
		DESCRIPTION     "A list of local and proxied (Radius server)
		                 user accounts"
		::= { fnUsers     2 }

	fnUserEntry     OBJECT-TYPE
		SYNTAX          FnUserEntry
		MAX-ACCESS      not-accessible
		STATUS          current
		DESCRIPTION     "An entry containing information applicable
		                 to a particular user account"
        INDEX           { fnUserIndex }
		::= { fnUserTable 1 }

	FnUserEntry ::= SEQUENCE {
		fnUserIndex    FnIndex,
		fnUserName     DisplayString,
		fnUserAuth     FnUserAuth,
		fnUserState    FnBoolState
	}

	fnUserIndex      OBJECT-TYPE
		SYNTAX          FnIndex
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "An index of user account"
		::= { fnUserEntry 1 }

	fnUserName       OBJECT-TYPE
		SYNTAX          DisplayString
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "A name of user account"
		::= { fnUserEntry 2 }

	fnUserAuth       OBJECT-TYPE
		SYNTAX          FnUserAuth
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Authentication type of the account"
		::= { fnUserEntry 3 }

	fnUserState      OBJECT-TYPE
		SYNTAX          FnBoolState
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Status of the user account"
		::= { fnUserEntry 4 }

	-- fnSystem . fnOptions

	fnOptIdleTimeout OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Idle period after which the administrator
		                 is automatically logged out off the system"
		::= { fnOptions  1 }

	-- fnSystem . fnLogging

	fnLogOption      OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Logging preferences"
		::= { fnLogging  1 }

	-- fnSystem . fnMessages

	fnMesgNumber    OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "The number of custom messages in sysMesgTable"
		::= { fnMessages  1 }

	-- fnDomains

	fnVdNumber          OBJECT-TYPE
		SYNTAX          Integer32
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "The number of virtual fnDomains in vdTable"
		::= { fnDomains   1 }

	fnVdTable           OBJECT-TYPE
		SYNTAX          SEQUENCE OF FnVdEntry
		MAX-ACCESS      not-accessible
		STATUS          current
		DESCRIPTION     "A list of virtual fnDomains"
		::= { fnDomains   2 }

	fnVdEntry           OBJECT-TYPE
		SYNTAX          FnVdEntry
		MAX-ACCESS      not-accessible
		STATUS          current
		DESCRIPTION     "An entry containing information applicable
		                 to a particular virtual domain"
		INDEX          { fnVdIndex }
		::= { fnVdTable 1 }

	FnVdEntry ::= SEQUENCE {
		fnVdIndex   FnIndex,
		fnVdName    DisplayString
	}

	fnVdIndex          OBJECT-TYPE
		SYNTAX          FnIndex
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Internal virtual domain index"
		::= { fnVdEntry   1 }

	fnVdName            OBJECT-TYPE
		SYNTAX          DisplayString
		MAX-ACCESS      read-only
		STATUS          current
		DESCRIPTION     "Virtual domain name"
		::= { fnVdEntry   2 }

	-- fnIp
	
	fnIpSessTable       OBJECT-TYPE
        	SYNTAX      SEQUENCE OF FnIpSessEntry
	        MAX-ACCESS  not-accessible
        	STATUS      current
	        DESCRIPTION "IP Sessions Info"
        	::= { fnIp        2 }

	fnIpSessEntry	OBJECT-TYPE
        	SYNTAX      FnIpSessEntry
	        MAX-ACCESS  not-accessible
        	STATUS      current
	        DESCRIPTION "Particular IP Session info"
	        INDEX       { fnIpSessIndex }
        	::= { fnIpSessTable 1 }

	FnIpSessEntry ::=
        	SEQUENCE {
		    fnIpSessIndex	FnIndex,
		    fnIpSessProto	FnSessProto,
		    fnIpSessFromAddr	IpAddress,
		    fnIpSessFromPort	INTEGER,
		    fnIpSessToAddr	IpAddress,
		    fnIpSessToPort	INTEGER,
		    fnIpSessExp		Counter32
        	}

	fnIpSessIndex	OBJECT-TYPE	
		SYNTAX      FnIndex
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "An index value that uniquely identifies
                	     an IP session"
		::=  { fnIpSessEntry  1 }

	fnIpSessProto	OBJECT-TYPE	
		SYNTAX      FnSessProto
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "The protocol of the connection"
		::=  { fnIpSessEntry  2 }

	fnIpSessFromAddr	OBJECT-TYPE	
		SYNTAX      IpAddress
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Source IP address"
		::=  { fnIpSessEntry  3 }

	fnIpSessFromPort	OBJECT-TYPE	
		SYNTAX      INTEGER  ( 0 .. 65535  )
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Source Port number"
		::=  { fnIpSessEntry  4 }

	fnIpSessToAddr	OBJECT-TYPE	
		SYNTAX      IpAddress
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Destination IP address"
		::=  { fnIpSessEntry  5 }

	fnIpSessToPort	OBJECT-TYPE	
		SYNTAX      INTEGER  ( 0 .. 65535  )
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Destination Port number"
		::=  { fnIpSessEntry  6 }

	fnIpSessExp	OBJECT-TYPE	
		SYNTAX      Counter32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Time (in seconds) before connection expires"
		::=  { fnIpSessEntry  7 }

	--  fnVpn
	
	fnVpnDialupTable       OBJECT-TYPE
        	SYNTAX      SEQUENCE OF FnVpnDialupEntry
	        MAX-ACCESS  not-accessible
        	STATUS      current
	        DESCRIPTION "Dialup VPN peers info"
        	::= { fnVpn        1 }

	fnVpnDialupEntry	OBJECT-TYPE
        	SYNTAX      FnVpnDialupEntry
	        MAX-ACCESS  not-accessible
        	STATUS      current
	        DESCRIPTION "Dialup VPN peer info"
	        INDEX       { fnVpnDialupIndex }
        	::= { fnVpnDialupTable 1 }

	FnVpnDialupEntry ::=
        	SEQUENCE {
		    fnVpnDialupIndex		FnIndex,
		    fnVpnDialupGateway		IpAddress,
		    fnVpnDialupLifetime		Integer32,
		    fnVpnDialupTimeout		Integer32,
		    fnVpnDialupSrcBegin		IpAddress,
		    fnVpnDialupSrcEnd		IpAddress,
		    fnVpnDialupDstAddr		IpAddress
--		    fnVpnDialupDstMask		IpAddress
        	}

	fnVpnDialupIndex	OBJECT-TYPE	
		SYNTAX      FnIndex
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "An index value that uniquely identifies
                	     an VPN dialup peer"
		::=  { fnVpnDialupEntry  1 }

	fnVpnDialupGateway	OBJECT-TYPE	
		SYNTAX      IpAddress
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Remote gateway IP address"
		::=  { fnVpnDialupEntry  2 }

	fnVpnDialupLifetime	OBJECT-TYPE	
		SYNTAX      Integer32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Tunnel life time (seconds)"
		::=  { fnVpnDialupEntry  3 }

	fnVpnDialupTimeout	OBJECT-TYPE	
		SYNTAX      Integer32
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Time before the next key exchange (seconds)"
		::=  { fnVpnDialupEntry  4 }

	fnVpnDialupSrcBegin	OBJECT-TYPE	
		SYNTAX      IpAddress
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Remote subnet address"
		::=  { fnVpnDialupEntry  5 }

	fnVpnDialupSrcEnd	OBJECT-TYPE	
		SYNTAX      IpAddress
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Remote subnet mask"
		::=  { fnVpnDialupEntry  6 }

	fnVpnDialupDstAddr	OBJECT-TYPE	
		SYNTAX      IpAddress
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "Local subnet address"
		::=  { fnVpnDialupEntry  7 }

--	fnVpnDialupDstMask	OBJECT-TYPE	
--		SYNTAX		IpAddress
--		MAX-ACCESS	read-only
--		STATUS		current
--		DESCRIPTION	"Local subnet mask"
--		::=  { fnVpnDialupEntry	8 }


	-- fnBridge

	fnBridgeFgtFailure	OBJECT-TYPE
		SYNTAX		DisplayString 
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION	"FortiGate failure detected by FortiBridge"
		::= { fnBridge	1 }

	--  fnIps
	
	fnIpsSigId		OBJECT-TYPE
		SYNTAX		FnIndex
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION	"ID of IPS signature"
		::= { fnIps	1 }

	fnIpsSigSrcIp		OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION	"Source IP Address of the IPS signature trigger"
		::= { fnIps	2 }

END