FOUNDRY-SN-CAM-MIB

FOUNDRY-SN-CAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Gauge32,
    Unsigned32
        FROM SNMPv2-SMI               -- [RFC2578]
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC                 -- [RFC2579]
    platform
        FROM FOUNDRY-SN-ROOT-MIB;

snCamMIB MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "The MIB module to describe generic objects for the usage of
              Content Addressable Memory (CAM).

              Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."

    REVISION      "200711190000Z"		-- Nov 19, 2007
    DESCRIPTION
            "Initial revision"
    ::= { platform 1  }


--
-- Textual Conventions
--

-- Percentage
--
Percent ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "An integer that is in the range of a percent value."
    SYNTAX Gauge32 (0..100)

--
-- high level object identifiers
--
snCamObjects  OBJECT IDENTIFIER ::= { snCamMIB 1 }


-- snCamProfile
snCamProfile OBJECT-TYPE
    SYNTAX  INTEGER {
                default(1),
                ipv4(2),
                ipv4Ipv6(3),
                ipv4Ipv62(4),
                ipv4Vpls(5),
                ipv4Vpn(6),
                ipv6(7),
                l2Metro(8),
                l2Metro2(9),
                mplsL3vpn(10),
                mplsL3vpn2(11),
                mplsVpls(12),
                mplsVpls2(13),
                mplsVpnVpls(14),
                multiService(15),
                multiService2(16),
                multiService3(17),
                multiService4(18)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This object identifies CAM partition profile. Each profile
            adjusts the partitions to optimize the device for corresponding
            applications."
    ::= { snCamObjects 1 }


-- cam usage objects
snCamUsage  OBJECT IDENTIFIER ::= { snCamObjects 2 }


-- the snCamUsageL3 table

-- The snCamUsageL3 table contains information of the entity's
-- CAM usage for layer 3 traffic.

snCamUsageL3Table OBJECT-TYPE
    SYNTAX      SEQUENCE OF SnCamUsageL3Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of snCamUsageL3 entries. This table contains
            information of the entity's CAM usage for layer 3 traffic."
    ::= { snCamUsage 1 }

snCamUsageL3Entry OBJECT-TYPE
    SYNTAX      SnCamUsageL3Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "An entry containing management information applicable to
            CAM usage for layer 3 traffic"
    INDEX   {   snCamUsageL3Slot,
                    snCamUsageL3Processor,
                    snCamUsageL3Type,
                    snCamUsageL3Supernet   }
    ::= { snCamUsageL3Table 1 }

SnCamUsageL3Entry ::=
    SEQUENCE {
        snCamUsageL3Slot			Unsigned32,
        snCamUsageL3Processor		Unsigned32,
        snCamUsageL3Type			INTEGER,
        snCamUsageL3Supernet		Unsigned32,
        snCamUsageL3Size			Unsigned32,
        snCamUsageL3Free			Gauge32,
        snCamUsageL3UsedPercent		Percent
    }

snCamUsageL3Slot OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies a linecard  in the device"
    ::= { snCamUsageL3Entry 1 }

snCamUsageL3Processor OBJECT-TYPE
    SYNTAX  Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies the network processor within a
            linecard in the device"
    ::= { snCamUsageL3Entry 2 }

snCamUsageL3Type OBJECT-TYPE
    SYNTAX  INTEGER {
                ipv4(1),
                ipv6(2),
                ipv4vpn(3),
                ipv6vpn(4)
            }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This object identifies the type of layer 3 traffic passing through the
            network processor."
    ::= { snCamUsageL3Entry 3 }

snCamUsageL3Supernet OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This object identifies the Supernet for the layer 3 type traffic. It
            provides information for longest match lookup. For example,  zero
            indicates all the bits of IP address will be matched, and one indicates
            all but the lowest bit in IP address will be matched. The range is
            [0..32] for IPv4 and IPv4VPN, where a value of 32 indicates the entry is
            the total of other supernets indexed by [0..31]. The range is [0..10] for
            IPv6, where a value of 10 indicates the entry is the total of other
            supernets indexed by [0..9]."
    ::= { snCamUsageL3Entry 4 }

snCamUsageL3Size OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS   "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The effective CAM size for this layer 3 traffic entry. For ipv4 traffic, each
            unit is 4 bytes. For ipv4vpn, each unit is 8 bytes. For ipv6, each unit is
            16 bytes."
    ::= { snCamUsageL3Entry 5 }

snCamUsageL3Free OBJECT-TYPE
    SYNTAX  Gauge32
    UNITS   "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The amount of CAM currently available for this layer 3 traffic entry. For ipv4
            traffic, each unit is 4 bytes. For ipv4vpn, each unit is 8 bytes. For ipv6, each
            unit is 16 bytes."
    ::= { snCamUsageL3Entry 6 }

snCamUsageL3UsedPercent OBJECT-TYPE
    SYNTAX  Percent
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The percentage of CAM currently being used for this layer 3 traffic entry. "
    ::= { snCamUsageL3Entry 7 }


-- the snCamUsageL2 table

-- The snCamUsageL2 table contains information of the entity's
-- CAM usage for layer 2 traffic.

snCamUsageL2Table OBJECT-TYPE
    SYNTAX      SEQUENCE OF SnCamUsageL2Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of snCamUsageL2 entries. This table contains information of
            the entity's CAM usage for layer 2 traffic."
    ::= { snCamUsage 2 }

snCamUsageL2Entry OBJECT-TYPE
    SYNTAX      SnCamUsageL2Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "An entry containing management information applicable to
            CAM usage for layer 2 traffic"
    INDEX   {	snCamUsageL2Slot,
			snCamUsageL2Processor,
			snCamUsageL2Type }
    ::= { snCamUsageL2Table 1 }

SnCamUsageL2Entry ::=
    SEQUENCE {
        snCamUsageL2Slot			Unsigned32,
        snCamUsageL2Processor		Unsigned32,
        snCamUsageL2Type			INTEGER,
        snCamUsageL2Size			Unsigned32,
        snCamUsageL2Free			Gauge32,
        snCamUsageL2UsedPercent		Percent
    }

snCamUsageL2Slot OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies a linecard in the device"
    ::= { snCamUsageL2Entry 1 }

snCamUsageL2Processor OBJECT-TYPE
    SYNTAX  Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies the network processor within a
            linecard in the device"
    ::= { snCamUsageL2Entry 2 }

snCamUsageL2Type OBJECT-TYPE
    SYNTAX  INTEGER {
                forwarding(1),
                protocol(2),
                flooding(3),
                total(4)
            }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This object identifies the type of layer 2 traffic passing through
            the network processor."
    ::= { snCamUsageL2Entry 3 }

snCamUsageL2Size OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The effective CAM size for this layer 2 traffic entry. Each unit is 8 bytes."
    ::= { snCamUsageL2Entry 4 }

snCamUsageL2Free OBJECT-TYPE
    SYNTAX  Gauge32
    UNITS  "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The amount of CAM currently available for this layer 2 traffic entry.
             Each unit is 8 bytes."
    ::= { snCamUsageL2Entry 5 }

snCamUsageL2UsedPercent OBJECT-TYPE
    SYNTAX  Percent
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The percentage of CAM currently being used for this layer 2 traffic entry. "
    ::= { snCamUsageL2Entry 6 }

-- the snCamUsageSession table

-- The snCamUsageSession table contains information of the entity's
-- CAM usage for sessions.

snCamUsageSessionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SnCamUsageSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of snCamUsageSession entries. This table contains information
            of the entitiy's CAM usage for sessions. "
    ::= { snCamUsage 3 }

snCamUsageSessionEntry OBJECT-TYPE
    SYNTAX      SnCamUsageSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "An entry containing management information applicable to CAM usage
            for sessions. "
    INDEX   { snCamUsageSessionSlot,
                   snCamUsageSessionProcessor,
                   snCamUsageSessionType }
    ::= { snCamUsageSessionTable 1 }

SnCamUsageSessionEntry ::=
    SEQUENCE {
        snCamUsageSessionSlot			Unsigned32,
        snCamUsageSessionProcessor		Unsigned32,
        snCamUsageSessionType			INTEGER,
        snCamUsageSessionSize			Unsigned32,
        snCamUsageSessionFree			Gauge32,
        snCamUsageSessionUsedPercent		Percent
    }

snCamUsageSessionSlot OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies a linecard in the device"
    ::= { snCamUsageSessionEntry 1 }

snCamUsageSessionProcessor OBJECT-TYPE
    SYNTAX  Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies the network processor within a
            linecard in the device"
    ::= { snCamUsageSessionEntry 2 }

snCamUsageSessionType OBJECT-TYPE
    SYNTAX  INTEGER {
                ipv4Multicast(1),
                ipv4andMacReceiveAcl(2),
                ipv4andMacRuleAcl(3),
                ipv4andMacTotal(4),
                ipv4andMacOut(5),
                ipv6Multicast(6),
                ipv6ReceiveAcl(7),
                ipv6RuleAcl(8),
                ipv6Total(9),
                ipv6Out(10),
                labelOut(11),
                ipv4SrcGuardDenial(12),
                ipv4SrcGuardPermit(13),
                internalForwardingLookup(14)
            }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This object identifies the type of sessions."
    ::= { snCamUsageSessionEntry 3 }


snCamUsageSessionSize OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The effective CAM size for this session traffic entry. For IPv4 sessions,
            each unit is 16 bytes. For IPv4 sessions, each unit is 64 bytes."
    ::= { snCamUsageSessionEntry 4 }

snCamUsageSessionFree OBJECT-TYPE
    SYNTAX  Gauge32
    UNITS  "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The amount of CAM currently available this session traffic entry.
        For IPv4 sessions, each unit is 16 bytes. For IPv4 sessions, each unit is
        64 bytes."
    ::= { snCamUsageSessionEntry 5 }

snCamUsageSessionUsedPercent OBJECT-TYPE
    SYNTAX  Percent
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The percentage of CAM currently being used by this session traffic entry "
    ::= { snCamUsageSessionEntry 6 }


-- the snCamUsageOther table

-- The snCamUsageOthers table contains information of the entity's
-- CAM usage for types other than L3, L2, or Session.

snCamUsageOtherTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SnCamUsageOtherEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of snCamUsageOther entries. This table contains information
            of the entitiy's CAM usage for types other than L3, L2, or Session."
    ::= { snCamUsage 4 }

snCamUsageOtherEntry OBJECT-TYPE
    SYNTAX      SnCamUsageOtherEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "An entry containing management information applicable to CAM usage
            for types other than L3, L2, or Session"
    INDEX   { snCamUsageOtherSlot,
              snCamUsageOtherProcessor,
              snCamUsageOtherType }
    ::= { snCamUsageOtherTable 1 }

SnCamUsageOtherEntry ::=
    SEQUENCE {
        snCamUsageOtherSlot			Unsigned32,
        snCamUsageOtherProcessor		Unsigned32,
        snCamUsageOtherType			INTEGER,
        snCamUsageOtherSize			Unsigned32,
        snCamUsageOtherFree			Gauge32,
        snCamUsageOtherUsedPercent		Percent
    }

snCamUsageOtherSlot OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies a linecard in the device"
    ::= { snCamUsageOtherEntry 1 }

snCamUsageOtherProcessor OBJECT-TYPE
    SYNTAX  Unsigned32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A number which uniquely identifies the network processor within a
            linecard in the device"
    ::= { snCamUsageOtherEntry 2 }

snCamUsageOtherType OBJECT-TYPE
    SYNTAX  INTEGER {
                gre(1),
                multicastVpls(2)
            }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This object identifies the type."
    ::= { snCamUsageOtherEntry 3 }

snCamUsageOtherSize OBJECT-TYPE
    SYNTAX  Unsigned32
    UNITS  "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The effective CAM size for this Other traffic entry. For GRE,
            each unit is 8 bytes. For multicast VPLS, each unit is 16 bytes."
    ::= { snCamUsageOtherEntry 4 }

snCamUsageOtherFree OBJECT-TYPE
    SYNTAX  Gauge32
    UNITS  "Entries"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The amount of CAM currently available this Other traffic entry.
            For GRE, each unit is 8 bytes. For multicast VPLS, each unit is 16 bytes."
    ::= { snCamUsageOtherEntry 5 }

snCamUsageOtherUsedPercent OBJECT-TYPE
    SYNTAX  Percent
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The percentage of CAM currently being used by this entry "
    ::= { snCamUsageOtherEntry 6 }


END