FOUNDRY-VLAN-CAR-MIB

FOUNDRY-VLAN-CAR-MIB DEFINITIONS ::= BEGIN

IMPORTS

	MODULE-IDENTITY, OBJECT-TYPE,Gauge32, Counter64,Integer32
		FROM SNMPv2-SMI
	snSwitch
		FROM FOUNDRY-SN-SWITCH-GROUP-MIB
	PacketSource, RateLimitType, RateLimitAction
		FROM FOUNDRY-CAR-MIB;



snVLanCAR MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."

    REVISION     "200909300000Z" -- September 30, 2009
    DESCRIPTION
			"convert from SMIv1 to SMIv2"
   ::= {snSwitch  17}
snVLanCARs	OBJECT IDENTIFIER ::= { snVLanCAR 1 }



snVLanCARTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnVLanCAREntry
	MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
		"A table of rate limit configuration entries for a vlan.
	Rate Limit is a method of traffic control.  It allows a set
	of rate limits to be configured and applied to packets flowing
	into/out of an interface to regulate network traffic."

		::= { snVLanCARs 1 }


snVLanCAREntry OBJECT-TYPE
		SYNTAX SnVLanCAREntry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"A collection of rate-limit configuration objects on this
		vlan."
		INDEX { snVLanCARVLanId, snVLanCARDirection, snVLanCARRowIndex }
		::= { snVLanCARTable 1 }

SnVLanCAREntry ::=
	SEQUENCE {
		snVLanCARDirection
					PacketSource,
		snVLanCARVLanId
						INTEGER,
		snVLanCARRowIndex
						INTEGER,
		snVLanCARType
						RateLimitType,
		snVLanCARAccIdx
						Integer32,
		snVLanCARRate
						Integer32,
		snVLanCARLimit
						Integer32,
		snVLanCARExtLimit
						Integer32,
		snVLanCARConformAction
			RateLimitAction,
		snVLanCARExceedAction
				RateLimitAction,
		snVLanCARStatSwitchedPkts
						Counter64,
		snVLanCARStatSwitchedBytes
						Counter64,
		snVLanCARStatFilteredPkts
						Counter64,
		snVLanCARStatFilteredBytes
						Counter64,
		snVLanCARStatCurBurst
				Gauge32
	}

--need to refer to the vlan table
--index once it is changed to single
--vlan id as the row index

snVLanCARVLanId OBJECT-TYPE
	SYNTAX  INTEGER (1..4095)
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The VLAN ID as one of the indices of this table .
		 Each VLAN ID can have a membership of multiple
		 ports."
	::= { snVLanCAREntry 1 }

snVLanCARDirection OBJECT-TYPE
	SYNTAX  PacketSource
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"The input or output transmission direction for the
				Rate Limit object."
		::= { snVLanCAREntry 2 }

snVLanCARRowIndex OBJECT-TYPE
	SYNTAX  INTEGER (1..2147483647)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"The table index for rate limit objects.
		It increases as the rate limit entries are added.
		Skips the number when a row is deleted."

		::= { snVLanCAREntry 3 }

snVLanCARType OBJECT-TYPE
	SYNTAX  RateLimitType
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		"The type of traffic rate-limited against."

	::= { snVLanCAREntry 4 }

snVLanCARAccIdx OBJECT-TYPE
	SYNTAX  Integer32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		"The index to the access list if RateLimitType is either
		quickAcc or standardAcc."

	::= { snVLanCAREntry 5 }

snVLanCARRate OBJECT-TYPE
	SYNTAX  Integer32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		"The comitted access rate. This determines the long term
		average transmission rate. Traffic that falls under this
		rate always conforms. This is average rate in bits per
		second."

	::= { snVLanCAREntry 6 }

snVLanCARLimit OBJECT-TYPE
	SYNTAX  Integer32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
		"This is the normal burst size that determines how large traffic
		bursts can be before some traffic exceeds the rate limit. This
		specifies the number of bytes that are guaranteed to be transported
		by the network at the average rate under normal conditions during
		committed time interval. This normal burst size is in bytes."

	::= { snVLanCAREntry 7 }

snVLanCARExtLimit OBJECT-TYPE
	SYNTAX  Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"This is the extended burst limit that determines how large traffic
		bursts can be before all the traffic exceeds the rate limit. This
		burst size is in bytes. "

	::= { snVLanCAREntry 8 }

snVLanCARConformAction OBJECT-TYPE
	SYNTAX	RateLimitAction
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"Action to be taken when the traffic is within
		the Rate Limit.
		drop		drop the packet.
		xmit		transmit the packet.
		continue	continue to evaluate to the subsequent
					rate limits.
		precedXmit	rewrite the IP precedence and transmit
					the packet.
		precedCont	rewrite the IP precedence and allow it
					evaluated by subsequent rate limits."

	::= { snVLanCAREntry 9 }

snVLanCARExceedAction OBJECT-TYPE
	SYNTAX	RateLimitAction
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"Action to be taken when the traffic exceeds
		the Rate Limit.
		drop		drop the packet.
		xmit		transmit the packet.
		continue	continue to evaluate to the subsequent
					rate limits.
		precedXmit	rewrite the IP precedence and transmit
					the packet.
		precedCont	rewrite the IP precedence and allow it
					evaluated by subsequent rate limits."

	::= { snVLanCAREntry 10 }

snVLanCARStatSwitchedPkts OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The counter of packets permitted by this rate limit."

	::= { snVLanCAREntry 11 }

snVLanCARStatSwitchedBytes OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The counter of bytes permitted by this interface."

	::= { snVLanCAREntry 12 }

snVLanCARStatFilteredPkts OBJECT-TYPE
	SYNTAX  Counter64
	--UNITS	"packets"
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The counter of packets which exceeded this rate limit."

	::= { snVLanCAREntry 13 }

snVLanCARStatFilteredBytes OBJECT-TYPE
	SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The counter of bytes which exceeded this rate limit."

	::= { snVLanCAREntry 14 }

snVLanCARStatCurBurst OBJECT-TYPE
	SYNTAX  Gauge32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The current received burst size."
	::= { snVLanCAREntry 15 }

-- end of snVLanCARTable


END