HP-ICF-PROVIDER-BRIDGE

HP-ICF-PROVIDER-BRIDGE DEFINITIONS ::= BEGIN

    IMPORTS
        hpSwitch            
            FROM HP-ICF-OID            
        OBJECT-TYPE, MODULE-IDENTITY
            FROM SNMPv2-SMI
        TruthValue
            FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP
            FROM SNMPv2-CONF
        dot1qVlanStaticEntry 
            FROM Q-BRIDGE-MIB 
        ifIndex 
            FROM IF-MIB;


    hpicfProviderBridge MODULE-IDENTITY
        LAST-UPDATED "200608150000Z"  -- August 15, 2006
        ORGANIZATION "Hewlett-Packard Company
                      Procurve Networking Business"
        CONTACT-INFO "Hewlett-Packard Company
                      8000 Foothills Blvd.
                      Roseville, CA 95747"
        DESCRIPTION  "This MIB module contains the HP 'version'
                      of the standard Provider Bridge MIB and 
                      the proprietary extensions to it."
        
        REVISION     "200608150000Z"  -- August 15, 2006
        DESCRIPTION  "Initial revision."
        ::= { hpSwitch 40 }

    hpicfProviderBridgeObjects OBJECT IDENTIFIER 
                     ::= { hpicfProviderBridge 1 }

    hpicfProviderBridgeBase OBJECT IDENTIFIER 
                     ::= { hpicfProviderBridgeObjects 1 }

-- **********************************************************************
-- Scalar Objects
-- **********************************************************************

-- This is a HP specific define - where we can configure a device as a 
-- regular vlanBridge, s-vlan bridge, provider edge bridge or a vlanSvlanBridge..

    hpicfProviderBridgeType OBJECT-TYPE
        SYNTAX      INTEGER {
                        vlanBridge(1),
                        svlanBridge(2),
                        providerEdgeBridge(3),
                        vlanSvlanBridge(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "hpicfProviderBridgeType controls bridge mode configuration.
                     A device can function in one of the 4 modes defined above.

                     vlanBridge         - provider bridge feature disabled mode,
                                          all vlans are cvlans.
                                          
                     svlanBridge        - provider bridge mode with only svlans.
                     
                     providerEdgeBridge - provider bridge mode with cvlans and 
                                          svlans and mappings between them.  
                                          
                     vlanSvlanBridge    - provider bridge mode with independent 
                                          cvlans and svlans on the same device.
                                          
                     Changing from one mode to another will empty out the 
                     current configuration information and reboot the device." 
        DEFVAL     { vlanBridge }
        ::= { hpicfProviderBridgeBase 1 }

-- This is a HP specific define - to configure the EtherType for Provider 
-- tagged frames. Applicable to s-vlan bridge, provider edge bridge or 
-- a vlanSvlanBridge..

    hpicfProviderBridgeEtherType OBJECT-TYPE
        SYNTAX      INTEGER (1536..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Defines the 2-byte ethertype for provider tagged frames.
	             The default is 0x88a8. 
                     Changing from one tag-type to another with a given 
                     hpicfProviderBridgeType configuration will reboot the
                     device and the new tag-type will take effect subsequently."
        DEFVAL     { 34984 }
        ::= { hpicfProviderBridgeBase 2 }


-- **********************************************************************
-- Tabular Objects
-- **********************************************************************

-- ------------------------------------------------------------------------
-- Vlan Classification Table
-- HP Specific extension table. Augments the dot1qVlanStaticTable and holds
-- information on whether the vlan is a provider vlan or a customer vlan
-- ------------------------------------------------------------------------
    hpicfProviderBridgeVlanTypeTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfProviderBridgeVlanTypeEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP proprietaty extension to dot1qVlanStaticTable 
                     to classify a vlan as a cvlan or an svlan"
        ::= { hpicfProviderBridgeBase 3}

    hpicfProviderBridgeVlanTypeEntry OBJECT-TYPE
        SYNTAX      HpicfProviderBridgeVlanTypeEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry for HP Specific extension table"
        AUGMENTS    { dot1qVlanStaticEntry }
        ::= { hpicfProviderBridgeVlanTypeTable 1 }
       
    HpicfProviderBridgeVlanTypeEntry ::=
        SEQUENCE {
            hpicfProviderBridgeVlanType INTEGER            
        }
       
    hpicfProviderBridgeVlanType OBJECT-TYPE
        SYNTAX      INTEGER {
                       cvlan(1), 
                       svlan(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Indicates the vlantype."

        ::= { hpicfProviderBridgeVlanTypeEntry 1 }

-- Provider Bridge Port Table
-- -------------------------------------------------------------

    hpicfProviderBridgePortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfProviderBridgePortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This specifies the designated type of an externally 
                    accessible port on a Provider Bridge."
        ::= { hpicfProviderBridgeBase 4 }

    hpicfProviderBridgePortEntry OBJECT-TYPE
        SYNTAX      HpicfProviderBridgePortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry that specifies the designated type of an 
                    externally accessible port on a Provider Bridge."
        INDEX       { ifIndex }
        ::= { hpicfProviderBridgePortTable 1 }
       
    HpicfProviderBridgePortEntry ::=
        SEQUENCE {
            hpicfProviderBridgePortType        INTEGER
        }
       
    hpicfProviderBridgePortType OBJECT-TYPE
        SYNTAX      INTEGER {
                        customer-edge(1),
                        customer-network(2),
                        provider-network (3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The type of an externally accessible port on 
                     a Provider Bridge.
                     A customer-edge port is a C-VLAN component Port 
                     on a Provider Edge Bridge that is connected to
                     customer owned equipment and receives and transmits 
                     frames for a single customer. Designating a port as a 
                     Customer Edge Port implies Provider Edge Bridge 
                     functionality and, specifically, the existence of a 
                     C-VLAN component associated with that port. This 
                     C-VLAN component is uniquely identified within the 
                     Bridge by the port number of the associated Customer 
                     Edge Port.
                     A customer-network port is an S-VLAN component Port 
                     on a Provider Bridge or within a Provider Edge
                     Bridge that receives and transmits frame for a 
                     single customer.
                     A provider-network port is an S-VLAN component Port 
                     on a Provider Bridge that can transmit and
                     receive frames for multiple customers."
        REFERENCE
          "IEEE 802.1ad Sec 3"
        DEFVAL     { customer-edge }

        ::= { hpicfProviderBridgePortEntry 1 }




-- **********************************************************************
-- Conformance information
-- **********************************************************************

    hpicfProviderBridgeConformance OBJECT IDENTIFIER 
                      ::= { hpicfProviderBridge 2 }

    hpicfProviderBridgeGroups OBJECT IDENTIFIER 
                      ::= { hpicfProviderBridgeConformance 1 }

    hpicfProviderBridgeBaseGroup OBJECT-GROUP
        OBJECTS     { hpicfProviderBridgeType,
                      hpicfProviderBridgeEtherType, 
                      hpicfProviderBridgePortType,
                      hpicfProviderBridgeVlanTypeTable
                     }
        STATUS      current
        DESCRIPTION "Basic Provider Bridge configuration information."
        ::= { hpicfProviderBridgeGroups 1 }


-- **********************************************************************
-- Compliance statements
-- **********************************************************************

    hpicfProviderBridgeCompliances OBJECT IDENTIFIER 
                   ::= { hpicfProviderBridgeConformance 2 }

    hpicfProviderBridgeCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for HP Switches with IEEE
                    standard Provider Bridge MIBs."
        MODULE
            MANDATORY-GROUPS { hpicfProviderBridgeBaseGroup }
            
        ::= { hpicfProviderBridgeCompliances 1 }

END