RAPID-IPSEC-ENDPOINT-PAIR-MIB

RAPID-IPSEC-ENDPOINT-PAIR-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE,  Unsigned32, Gauge32,
        OBJECT-IDENTITY, enterprises,
        IpAddress                       FROM SNMPv2-SMI
        rapidstream                     FROM RAPID-MIB;

    rsIpsecEndpointPairModule MODULE-IDENTITY
        LAST-UPDATED "9909081200Z"
        ORGANIZATION "WatchGuard Technologies, Inc."
        CONTACT-INFO
                  "   Ella Yu
                      WatchGuard Technologies, Inc.
                      1841 Zanker Road
                      San Jose, CA 95112
                      USA

                      408-519-4888
                      ella.yu@watchguard.com "

        DESCRIPTION
            "The MIB module describes generic Ipsec Endpoint Pair information
            of RapidStream system.  Mainly, the information 
            obtained from this MIB is used to constructed topological
            view of IPSec security gateways that are connected by
            IPSec tunnels. 
               
            An IPSec Endpoint Pair is a pair of security gateways that
            are connected with 0 or more IPSec SA's in tunnel mode.  
            It contains information of aggregated information 
            of tunnel mode SA's between two security gateways.

            An IPSec Endpoint Pair is identified by a pair of IP addresses.
            Therefore, if an IPSec security gateway X has 2 external
            IP addresses while IPsec secruity gateway Y has 3 external
            IP addresses, there are potentially 6 IPsec Endpoint Pairs
            between X and Y."


        REVISION      "200003211200Z"
        DESCRIPTION
            "Initial revision."
        REVISION      "200211011200Z"
        DESCRIPTION
            "Changed CONTACT-INFO."
        ::= { rapidstream 5 }


    rsIpsecEndpointPairMIB OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all IPSec tunnel
             branches."
        ::= { rsIpsecEndpointPairModule 1 }

    rsIpsecEndpointPair OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all IPSec
            tunnel information."
        ::= { rsIpsecEndpointPairMIB 1 }

    rsIpsecEndpointPairStatistics OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all objects which
            are global counters for IPSec tunnels."
        ::= { rsIpsecEndpointPairMIB 2 }


    rsIpsecEndpointPairNum OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of entries in the rsIpsecEndpointPairTable. "
        ::= { rsIpsecEndpointPair 1 }

    rsIpsecEndpointPairTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF RSIpsecEndpointPairEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This is the connection table describing all current
            IPSec tunnels exist on this entity."
        ::= { rsIpsecEndpointPair 2 }


    rsIpsecEndpointPairEntry OBJECT-TYPE
        SYNTAX      RSIpsecEndpointPairEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry (conceptual row) containing the information on a
            IPSec tunnel between two IPSec security gateways."
        INDEX{ rsIpsecEndpointPairIndex }
        ::= { rsIpsecEndpointPairTable 1 }

    RSIpsecEndpointPairEntry ::= SEQUENCE {

        rsIpsecEndpointPairIndex                 Integer32,

        rsIpsecEndpointPairLocalAddr             IpAddress,
        rsIpsecEndpointPairPeerAddr              IpAddress,


        rsIpsecEndpointPairInSAs                 Unsigned32,
        rsIpsecEndpointPairOutSAs                Unsigned32,
        rsIpsecEndpointPairInAccKbytes           Counter32,
        rsIpsecEndpointPairOutAccKbytes          Counter32,
        rsIpsecEndpointPairInPackets             Counter32,
        rsIpsecEndpointPairOutPackets            Counter32,
        rsIpsecEndpointPairDecryptErrors         Counter32,
        rsIpsecEndpointPairAuthErrors            Counter32,
        rsIpsecEndpointPairReplayErrors          Counter32,
        rsIpsecEndpointPairPolicyErrors          Counter32,
        rsIpsecEndpointPairPadErrors             Counter32,
        rsIpsecEndpointPairOtherReceiveErrors    Counter32,
        rsIpsecEndpointPairSendErrors            Counter32

    }

    rsIpsecEndpointPairIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
               "The running index of this IPSec endpoint pair."
        ::= { rsIpsecEndpointPairEntry 1 }

    rsIpsecEndpointPairLocalAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The local IP address of the current IPSec ednpoint pair."
        ::= { rsIpsecEndpointPairEntry 2 }

    rsIpsecEndpointPairPeerAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The remote IP address of the current IPSec endpoint pair."
        ::= { rsIpsecEndpointPairEntry 3 }


    rsIpsecEndpointPairInSAs OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of inbound IPSEC SA's within this
             IPSec endpoint pair."
        ::= { rsIpsecEndpointPairEntry 4 }

    rsIpsecEndpointPairOutSAs OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of outbound IPSEC SA's within this
             IPSec endpoint pair."
        ::= { rsIpsecEndpointPairEntry 5 }

    rsIpsecEndpointPairInAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total inbound traffic in Kbytes since the establish of
             this connection."
        ::= { rsIpsecEndpointPairEntry 6 }

    rsIpsecEndpointPairOutAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total outound traffic in Kbytes since the establish of
            this connection."
        ::= { rsIpsecEndpointPairEntry 7 }

    rsIpsecEndpointPairInPackets  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of inbound packets since the establish of
            this connection."
        ::= { rsIpsecEndpointPairEntry 8 }

    rsIpsecEndpointPairOutPackets  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of outound packets since the establish of
            this connection."
        ::= { rsIpsecEndpointPairEntry 9 }

    rsIpsecEndpointPairDecryptErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of packets discarded due to decryption
            error since the establish of this connection."
        ::= { rsIpsecEndpointPairEntry 10 }

    rsIpsecEndpointPairAuthErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of packets discarded due to authentication
            error since the establish of this connection."
        ::= { rsIpsecEndpointPairEntry 11 }

    rsIpsecEndpointPairReplayErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of packets discarded due to replay
            error since the establish of this connection."
        ::= { rsIpsecEndpointPairEntry 12}

    rsIpsecEndpointPairPolicyErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of packets discarded due to policy
            error since the establish of this connection."
        ::= { rsIpsecEndpointPairEntry 13 }

    rsIpsecEndpointPairPadErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Total number of packets discarded due to pad value
            error since the establish of this connection."
        ::= { rsIpsecEndpointPairEntry 14 }

    rsIpsecEndpointPairOtherReceiveErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of packets discarded  due to errors
            other than decryption, authentication or replay errors. This
            may include packets dropped due to a lack of receive
            buffers, and may include packets dropped due to congestion
            at the decryption element."
        ::= { rsIpsecEndpointPairEntry 15 }

    rsIpsecEndpointPairSendErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of packets discarded due to any error.
            This may include errors due to a lack of transmit buffers."
        ::= { rsIpsecEndpointPairEntry 16 }


   -- global statistics

   rsIpsecEndpointPairTotalInSAs  OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of active inbound SA's in the entity."
        ::= { rsIpsecEndpointPairStatistics 1 }

   rsIpsecEndpointPairTotalOutSAs  OBJECT-TYPE
        SYNTAX      Gauge32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of active outbound SA's in the entity."
        ::= { rsIpsecEndpointPairStatistics 2 }

   rsIpsecEndpointPairTotalInAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total inbound IPsec traffic of this entity."
        ::= { rsIpsecEndpointPairStatistics 3 }

   rsIpsecEndpointPairTotalOutAccKbytes  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total outbound IPsec traffic of this entity."
        ::= { rsIpsecEndpointPairStatistics 4 }

   rsIpsecEndpointPairTotalInPackets  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "Kbytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total inbound IPsec packets of this entity."
        ::= { rsIpsecEndpointPairStatistics 5 }

   rsIpsecEndpointPairTotalOutPackets  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total outbound IPsec packets of this entity."
        ::= { rsIpsecEndpointPairStatistics 6 }


    rsIpsecEndpointPairTotalDecryptErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Total number of packets on this entity discarded due to encryption
           error."
        ::= { rsIpsecEndpointPairStatistics 7 }

    rsIpsecEndpointPairTotalAuthErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Total number of packets on this entity discarded 
           due to authentication errors."
        ::= { rsIpsecEndpointPairStatistics 8 }


    rsIpsecEndpointPairTotalReplayErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Total number of packets discarded due to replay
           errors on this entity."
        ::= { rsIpsecEndpointPairStatistics 9 }

    rsIpsecEndpointPairTotalPolicyErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Total number of packets discarded due to policy
           errors on this entity."
        ::= { rsIpsecEndpointPairStatistics 10 }


    rsIpsecEndpointPairTotalPadErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
           "Total number of packets on this entity  discarded due to pad value
           error."
        ::= { rsIpsecEndpointPairStatistics 11 }

    rsIpsecEndpointPairTotalOtherReceiveErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of packets on this entity discarded  due to errors
            other than decryption, authentication or replay errors. This
            may include packets dropped due to a lack of receive
            buffers, and may include packets dropped due to congestion
            at the decryption element."
        ::= { rsIpsecEndpointPairStatistics 12 }


    rsIpsecEndpointPairTotalSendErrors  OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of packets discarded due to any error on
            this entity."

        ::= { rsIpsecEndpointPairStatistics 13 }


    rsIpsecEndpointPairPeerIPToTunnel OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION
            "This is the base object identifier for all tunnels
             information of the policies."
        ::= {rsIpsecEndpointPairMIB 3}

    rsIpsecEndpointPairPeerIPToTunnelNum OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of tunnels in the peeriptotunnel table. "
        ::= { rsIpsecEndpointPairPeerIPToTunnel 1 }

    rsIpsecEndpointPairPeerIPToTunnelTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF RSIpsecEndpointPairPeerIPToTunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The peeriptotunnel table in the endpointpair mib."
        ::= { rsIpsecEndpointPairPeerIPToTunnel 2 }

    rsIpsecEndpointPairPeerIPToTunnelEntry OBJECT-TYPE
        SYNTAX      RSIpsecEndpointPairPeerIPToTunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry (conceptual row) containing the peer ip and tunnel
            information."
        INDEX {
            rsIpsecEndpointPairPeerIPToTunnelPeerIP,
            rsIpsecEndpointPairPeerIPToTunnelTunnelID
        }
        ::= { rsIpsecEndpointPairPeerIPToTunnelTable 1 }

    RSIpsecEndpointPairPeerIPToTunnelEntry ::= SEQUENCE {

        rsIpsecEndpointPairPeerIPToTunnelPeerIP      IpAddress,
        rsIpsecEndpointPairPeerIPToTunnelTunnelID    Integer32
    }
    
    rsIpsecEndpointPairPeerIPToTunnelPeerIP  OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The peer ip of the peeriptotunnel table."
        ::= {rsIpsecEndpointPairPeerIPToTunnelEntry 1}
            
    rsIpsecEndpointPairPeerIPToTunnelTunnelID  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The tunnel id of the peeriptotunnel table."
        ::= {rsIpsecEndpointPairPeerIPToTunnelEntry 2}
        
END