SUPERMICRO-HEALTH-MIB

-- *****************************************************************
-- SUPERMICRO-SMI.mib:  Super Micro Enterprise Structure of Management Information
--
-- October 26 2001, Software LAB
--
-- Copyright (c) 1993-2001 by Super Micro Computer Inc.
-- All rights reserved.
-- 
-- *****************************************************************

SUPERMICRO-HEALTH-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	Integer32,
	Gauge32
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION,
	DisplayString,
	TruthValue
		FROM SNMPv2-TC
	MODULE-COMPLIANCE,
	OBJECT-GROUP
		FROM SNMPv2-CONF
	smHealth
		FROM SUPERMICRO-SMI;

smHealthMIB MODULE-IDENTITY
	LAST-UPDATED "200110260000Z"
	ORGANIZATION "Super Micro Computer Inc."
	CONTACT-INFO
		"	Software Lab

		Postal: 980 Rock Avenue
			San Jose, CA  95131
			USA

		   Tel: +1 408 503 8000

		E-mail: SoftLab@supermicro.com"
	DESCRIPTION
		"MIB module for monitoring health information"
	::= { smHealth 1 }

SMHealthInfoTypes ::= TEXTUAL-CONVENTION
	STATUS		current
	DESCRIPTION
		"Represents the different types of health information that
		may be present in a managed device.  The following health
		information types are currently predefined:
			0:  fan speed
			1:  voltage
			2:  temperature
		"
	SYNTAX		Integer32 (0..64)

smHealthObjects OBJECT IDENTIFIER ::= { smHealthMIB 1 }

smHealthMonitorTable OBJECT-TYPE
	SYNTAX	    SEQUENCE OF SMHealthMonitorEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"A table of health monitoring entries."
	::= { smHealthObjects 1 }

-- ================
smHealthMonitorEntry OBJECT-TYPE
	SYNTAX	    SMHealthMonitorEntry
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"An entry in the health monitoring table.
		Entries cannot be created or deleted via SNMP operations."
	INDEX	    { smHealthMonitorIndex }
	::= { smHealthMonitorTable 1 }

SMHealthMonitorEntry ::=
	SEQUENCE {
		smHealthMonitorIndex		Integer32,
		smHealthMonitorName			DisplayString,
		smHealthMonitorType			SMHealthInfoTypes,
		smHealthMonitorReading		Integer32,
		smHealthMonitorHighLimit	Integer32,
		smHealthMonitorLowLimit		Integer32,
		smHealthMonitorMaxReading	Integer32,
		smHealthMonitorMinReading	Integer32,
		smHealthMonitorDivisor		Integer32,
		smHealthMonitorMonitor		TruthValue
	}

smHealthMonitorIndex OBJECT-TYPE
	SYNTAX	    Integer32 (1..65535)
	MAX-ACCESS  not-accessible
	STATUS	    current
	DESCRIPTION
		"The unique value which identifies this Monitor device."
	::= { smHealthMonitorEntry 1 }

smHealthMonitorName OBJECT-TYPE
	SYNTAX	    DisplayString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"A textual full name assigned to the Monitor device.
		This object is suitable for output to a human operator."
	::= { smHealthMonitorEntry 2 }

smHealthMonitorType OBJECT-TYPE
	SYNTAX	    SMHealthInfoTypes
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Identifies this Monitor device type."
	::= { smHealthMonitorEntry 3 }

smHealthMonitorReading OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the value from the Monitor device that are
		currently in use on the managed device.
		FAN reading is in unit of RPM,
		Voltage reading is in unit of mV,
		Temperture reading is in unit of degree C"
	::= { smHealthMonitorEntry 4 }

smHealthMonitorHighLimit OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-write
	STATUS	    current
	DESCRIPTION
		"Indicates the value for the High limitation 
		for the Monitor device that are currently in use on the
		managed device.
		Apply to Temperature and Voltage deivces only.
		Voltage limit is in unit of mV,
		Temperture limit is in unit of degree C"
	::= { smHealthMonitorEntry 5 }

smHealthMonitorLowLimit OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-write
	STATUS	    current
	DESCRIPTION
		"Indicates the value for the Low limitation 
		for the Monitor device that are currently in use on the
		managed device.
		FAN limit is in unit of RPM,
		Voltage limit is in unit of mV,
		Temperture limit is in unit of degree C"
	::= { smHealthMonitorEntry 6 }

smHealthMonitorMaxReading OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the value for the possible Maximum reading value 
		for the Monitor device that are currently in use on the
		managed device.
		FAN reading is in unit of RPM,
		Voltage reading is in unit of mV,
		Temperture reading is in unit of degree C"
	::= { smHealthMonitorEntry 7 }

smHealthMonitorMinReading OBJECT-TYPE
	SYNTAX	    Integer32 (0..65535)
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION
		"Indicates the value for the possible Minimum reading value 
		for the Monitor device that are currently in use on the
		managed device.
		FAN reading is in unit of RPM,
		Voltage reading is in unit of mV,
		Temperture reading is in unit of degree C"
	::= { smHealthMonitorEntry 8 }

smHealthMonitorDivisor OBJECT-TYPE
	SYNTAX	    Integer32
	MAX-ACCESS  read-write
	STATUS	    current
	DESCRIPTION
		"Indicates the value for the Divisor for the Fan
		device that are currently in use on the managed device.
		Apply to Fan devices only."
	::= { smHealthMonitorEntry 9 }

smHealthMonitorMonitor OBJECT-TYPE
	SYNTAX	    TruthValue
	MAX-ACCESS  read-write
	STATUS	    current
	DESCRIPTION
		"Indicates the monitoring status for the Fan device 
		that are currently in use on the managed device.
		1 = monitor, 2=do not monitor"
	::= { smHealthMonitorEntry 10 }
                                      
-- notifications

smHealthNotifications OBJECT IDENTIFIER ::= { smHealthMIB 2 }

-- (no notifications are currently defined)


-- conformance information

smHealthConformance OBJECT IDENTIFIER ::= { smHealthMIB 3 }
smHealthCompliances OBJECT IDENTIFIER ::= { smHealthConformance 1 }
smHealthGroups OBJECT IDENTIFIER ::= { smHealthConformance 2 }


-- compliance statements

smHealthCompliance MODULE-COMPLIANCE
	STATUS	current
	DESCRIPTION
		"The compliance statement for entities which implement
		the Supermicro Health Monitoring MIB"
	MODULE	-- this module
		MANDATORY-GROUPS { smHealthMonitorGroup}
	::= { smHealthCompliances 1 }


-- units of conformance

smHealthMonitorGroup OBJECT-GROUP
	OBJECTS {
		smHealthMonitorType,
		smHealthMonitorName,
		smHealthMonitorReading,
		smHealthMonitorHighLimit,
		smHealthMonitorLowLimit,
		smHealthMonitorMaxReading,
		smHealthMonitorMinReading,
		smHealthMonitorMonitor
	}
	STATUS	current
	DESCRIPTION
		"A collection of objects providing Monitor devices."
	::= { smHealthGroups 1 }

END