gpib.conf

interface {
	minor = 0			/* board index, minor = 0 uses /dev/gpib0, minor = 1 uses /dev/gpib1, etc. */
	board_type = "gpib_bitbang"	/* name of the driver */
	name = "raspi_gpio_interface"	/* optional name, allows you to get a board descriptor using ibfind() */
	pad = 0				/* primary address of interface             */
	sad = 0				/* secondary address of interface           */
	timeout = T3s			/* timeout for commands */

	eos = 0x0d	/* EOS Byte, 0xa is newline and 0xd is carriage return */
	set-reos = yes	/* Terminate read if EOS */
	set-bin = no	/* Compare EOS 8-bit */
	set-xeos = no	/* Assert EOI whenever EOS byte is sent */
	set-eot = yes	/* Assert EOI with last byte on writes */

/* settings for boards that lack plug-n-play capability */
	base = 0	/* Base io ADDRESS                  */
	irq  = 0	/* Interrupt request level */
	dma  = 0	/* DMA channel (zero disables)      */

	master = yes	/* interface board is system controller */
}


device {
	minor = 0
        name = "example Desktop-Multimeter"
        pad = 9
        sad = 96

        eos = 0x0a
        set-reos = yes
        set-bin = no
}