uboot.env.in

arch=arm
baudrate=115200
board=mx6cuboxi
board_name=HUMMINGBOARD
board_rev=MX6Q
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_targets=mmc0 usb0 pxe dhcp 
bootcmd=run loadsplash; run snappy_boot
bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00010:UNDI:003000;setenv bootp_arch 0xa;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=setenv devnum 0; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_usb0=setenv devnum 0; run usb_boot
bootdelay=2
bootm_size=0x10000000
console=ttymxc0
cpu=armv7
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
efi_dtb_prefixes=/ /dtb/ /dtb/current/
ethact=FEC
ethaddr=d0:63:00:00:00:00
fdt_addr=0x18000000
fdt_addr_r=0x18000000
fdt_high=0xffffffff
fdtfile=undefined
fdt_file=imx6q-hummingboard.dtb
findfdt=if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then setenv fdtfile imx6q-hummingboard.dtb; fi; if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then setenv fdtfile imx6dl-hummingboard.dtb; fi; if test $board_name = CUBOXI && test $board_rev = MX6Q ; then setenv fdtfile imx6q-cubox-i.dtb; fi; if test $board_name = CUBOXI && test $board_rev = MX6DL ; then setenv fdtfile imx6dl-cubox-i.dtb; fi; if test $fdtfile = undefined; then echo WARNING: Could not determine dtb to use; fi; 
initrd_high=0xffffffff
initrd_file=initrd.img
ip_dyn=yes
kernel_addr_r=0x12000000
kernel_file=kernel.img
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x12000000
loadfdt=fatload mmc 0:1 ${fdt_addr} ${snap_kernel}/dtbs/${fdt_file}
loadfiles=run loadkernel; run loadinitrd; run loadfdt
loadinitrd=fatload mmc 0:1 ${ramdiskaddr} ${snap_kernel}/${initrd_file}; setenv initrd_size ${filesize}
loadkernel=fatload mmc 0:1 ${loadaddr} ${snap_kernel}/${kernel_file}
loadsplash=setenv stdout serial; if load mmc 0 10000000 ${splash}; then bmp d 10000000; fi
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
mmcdev=0
preboot=if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vga; setenv stderr serial,vga; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;
pxefile_addr_r=0x12000000
ramdisk_addr_r=0x13000000
ramdiskaddr=0x13000000
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x12000000
soc=mx6
splash=splash.bmp
stderr=serial,vga
stdin=serial,usbkbd
stdout=serial,vga
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
vendor=solidrun

snappy_boot=if test "${snap_mode}" = "try"; then setenv snap_mode "trying"; saveenv; if test "${snap_try_core}" != ""; then setenv snap_core "${snap_try_core}"; fi; if test "${snap_try_kernel}" != ""; then setenv snap_kernel "${snap_try_kernel}"; fi; elif test "${snap_mode}" = "trying"; then setenv snap_mode ""; saveenv; fi; run loadfiles; setenv mmcroot "/dev/disk/by-label/writable ${snappy_cmdline} snap_core=${snap_core} snap_kernel=${snap_kernel}"; run mmcargs; bootz ${loadaddr} ${ramdiskaddr}:${initrd_size} ${fdt_addr}
snappy_cmdline=rng_core.default_quality=700 net.ifnames=0 init=/lib/systemd/systemd ro panic=-1 fixrtc

mmcargs=setenv bootargs "console=ttymxc0,115200 console=tty0 root=${mmcroot}"