diff --git a/README.md b/README.md
index ae56640..82d3b73 100644
--- a/README.md
+++ b/README.md
@@ -23,26 +23,26 @@ Stereo output is provided.
 
 There are three pages of menu accessible via the encoder. LED1 shows R, G and B respectively.
 
-R = MIX page
-  POT1 = Dry/Wet mix
-  POT2 = Stereo Spread (Odd vs Even bands panned ѕeparately).
-
-G = PHASE page
-  Button1 - Phase Noise or Phase Shift mode - LED2 toggles Red when in Phase Noise mode, otherwise it's in Phase Shift mode.
-  In Phase Noise mode - (LED2 Red/Purple)
-    POT1 = Amount of Noise modulation applied to each band
-    POT2 = Per Band BW multiplier
-  In Phase Shift mode - (LED2 Off/Blue)
-    POT1 = Shift amount (CCW is -ve, 12 o'clock is none, CW is +ve)
-    POT2 = Per Band BW multiplier
-
-B = DELAY page
-  Button2 - Delay Noise or Delay OSC mode - LED2 toggles Blue when in Delay Noise mode, otherwise it's in Delay Osc mode.
-  In Delay Noise mode - (LED2 Blue/Purple)
-    POT1 = Amount of Noise modulation applied to each band
-    POT2 = Unused
-    NOTE: Maybe this needs more work?  Sounds gritty.
-  In Delay Osc mode - (LED2 Red/Off)
-    POT1 = Delay Mod Rate
-    POT2 = Delay Mod Depth
+R = MIX page  
+    POT1 = Dry/Wet mix  
+    POT2 = Stereo Spread (Odd vs Even bands panned ѕeparately)  
+  
+G = PHASE page  
+    Button1 - Phase Noise or Phase Shift mode - LED2 toggles Red when in Phase Noise mode, otherwise it's in Phase Shift mode.  
+    In Phase Noise mode - (LED2 Red/Purple)  
+      POT1 = Amount of Noise modulation applied to each band  
+      POT2 = Per Band BW multiplier  
+    In Phase Shift mode - (LED2 Off/Blue)  
+      POT1 = Shift amount (CCW is -ve, 12 o'clock is none, CW is +ve)  
+      POT2 = Per Band BW multiplier  
+  
+B = DELAY page  
+    Button2 - Delay Noise or Delay OSC mode - LED2 toggles Blue when in Delay Noise mode, otherwise it's in Delay Osc mode.  
+    In Delay Noise mode - (LED2 Blue/Purple)  
+      POT1 = Amount of Noise modulation applied to each band  
+      POT2 = Unused  
+      NOTE: Maybe this needs more work?  Sounds gritty.  
+    In Delay Osc mode - (LED2 Red/Off)  
+      POT1 = Delay Mod Rate  
+      POT2 = Delay Mod Depth