This repo contains all source code required to create the msprime paper.
Note that this is research software that was built for a particular purpose. It is not high quality software and probably contains bugs. Use at your own risk!
The src/algorithms.py file contains simple implementations of
all the algorithms in the paper.
First, clone the repo:
$ git clone https://github.com/jeromekelleher/msprime-paper.git
To run the code to compare simulations on a clean Ubuntu 15.10 system, we need the following:
$ sudo apt-get install python-dev python-pip libgsl0-dev libhdf5-serial-dev \
pkg-config python-numpy python-pandas python-matplotlib libboost-dev \
default-jre asymptote r-cran-ape python-biopython
$ sudo pip install -r requirements.txt
To create the paper and illustrations, we first need to get the PLoS style files:
$ wget http://journals.plos.org/plosone/s/file?id=SyJ3/plos-latex-template.zip $ unzip file\?id\=SyJ3%2Fplos-latex-template.zip
The location of this file will probably change, but these commands worked at the time of writing.
To compile the LaTeX document, run:
$ make
All of the prerequisites should already be installed, and the data required
to create the plots is already present in the data directory.
If you wish to run all the simulations for yourself, follow the three stages outlined in this section. However, if you just wish to obtain the plots from data used in the paper, run:
$ python src/plots.py plot all
All the plots should now be in the figures directory.
Creating the plots to compare simulations works in three stages. First, we run the simulations and output the replicate data; second, we collect the replicate data and put it into a central file; and finally, we create the plots.
All work running simulations and plotting the results is done in the file
src/plots.py.
First, we must download and build the other simulation packages that we'll be using:
$ make -C simulators
If everything goes according to plan, we should have working versions of the simulators we need once this completes.
Before we run any simulations, we must first set the locale to avoid problems
with cosi2:
$ export LC_ALL=C
To run the simulations, use:
$ python src/plots.py simulate <dataset ID> -n <num_replicates> -p <num_processes>
The first argument to simulate is a dataset identifier. There are three
datasets, alg_stats, tree_simulator_stats and
haplotype_simulator_stats. There is also a special identifier all, which
will run all available jobs sequentially. Therefore, we might run:
$ python src/plots.py simulate all -n 1 -p 8
This will run all available simulations with 1 replicate each (so, very inaccurate timings will be obtained) over 8 threads.
Obtaining accurate timing information from modern processors is quite challenging, as clock frequencies are dynamically rescaled constantly during workloads. This can lead to significant skews in timings if, for example, one timing was obtained when the processor core was running at peak frequency and another was obtained when it was at minimum frequency. A crude (but effective) way to work around this is ensure that the CPUs on the system are always busy when measurements are being taken. For example, if we have a machine with 20 threads then we first set off a stress job at low priority to ensure that all cores hit their equilibrium frequency:
$ nice -n 19 stress -c 20
This job will use up any spare CPU resources, and ensure that the clock frequencies of different cores don't vary unpredictably. If using an Intel processor it is also a good idea to turn off Turbo Boost while the measurements are being taken.
Once a dataset has been simulated, we can then assemble it into a more convenient form for plotting. This is done by running:
$ python src/plots.py process <dataset ID>
In the same way as the simulate command, we provide a dataset ID
as the argument, and we can pass the special all value to indicate
that we want to process all data sets. After running the process
command the raw replicate data in the data/results__NOBACKUP__
directory is compressed into the corresponding data files in
the data directory. These are stored in JSON format for convenience.
The data used in the paper is included here in the data
directory, and will be over written if you run process.
To plot the results, simply run:
$ python src/plots.py plot all
Similarly to the other commands, we provide a plot ID to the plot command to determine which figure we should draw.
To run the examples in which we compare the sizes of files in various formats and benchmark different Newick parsers, run:
$ make -C examples