CTRON-SFPS-BINDERY-MIB

CTRON-SFPS-BINDERY-MIB DEFINITIONS ::= BEGIN

--  sfps-bindery-mib.txt
--  Revision: 0.0.04
--
--  Part Number: 
--  Date: April 19, 1996
--
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services MIB.
--
--  This module will be extended, as required.
--

--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

 
IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB
--      enterprises,
--      IpAddress, 
--      Counter, Gauge, 
      TimeTicks
                FROM RFC1155-SMI

--  These Objects are defined in the file sfps-inc.mib.txt
                sfpsAgentConfig
                FROM CTRON-SFPS-INCLUDE-MIB;

--  Textual Conventions

--SfpsSwitchInstance ::= INTEGER
--  this will map to chassis.module index value

--SfpsSwitchPort ::= INTEGER
--  this will map to chassis.module.portgroup.portsubgroup.port index value

--SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address

HexInteger ::= INTEGER
--  display this integer in hex format


--

--  SFPS Switch Agent Bindery Group
--  This group contains the objects that pertain to the SFPS Bindery.

sfpsAgentBinderyConfigTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsAgentBinderyConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION 
                "Soft Binding is implemented through a few new base classes, 
                a small army of instances of the base classes plus a bindery
                table to tie the whole mess together."
       ::= { sfpsAgentConfig 1 }

sfpsAgentBinderyConfigEntry    OBJECT-TYPE
        SYNTAX  SfpsAgentBinderyConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
               "Each entry specifies the  configuration for the bindery component."
        INDEX   {sfpsAgentBinderyConfigHashLeaf,sfpsAgentBinderyConfigHashIndex  }
       ::= { sfpsAgentBinderyConfigTable 1 }

SfpsAgentBinderyConfigEntry
    ::=         SEQUENCE {
                sfpsAgentBinderyConfigHashLeaf          HexInteger,
                sfpsAgentBinderyConfigHashIndex         INTEGER,
                sfpsAgentBinderyConfigName              DisplayString,
                sfpsAgentBinderyConfigType              DisplayString,
                sfpsAgentBinderyConfigOperStatus        INTEGER,
                sfpsAgentBinderyConfigAdminStatus       INTEGER,
                sfpsAgentBinderyConfigStatusTime        TimeTicks,
                sfpsAgentBinderyConfigNVStatus          INTEGER
        }  

sfpsAgentBinderyConfigHashLeaf    OBJECT-TYPE
        SYNTAX  HexInteger  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "NO hash, part of instance key."
        ::= { sfpsAgentBinderyConfigEntry 1 }

sfpsAgentBinderyConfigHashIndex     OBJECT-TYPE
        SYNTAX  INTEGER  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION  
               "NO Bucket index, part of instance key."
        ::= { sfpsAgentBinderyConfigEntry 2 }


sfpsAgentBinderyConfigName     OBJECT-TYPE
        SYNTAX   DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Elements Name."
        ::= { sfpsAgentBinderyConfigEntry 3 }


sfpsAgentBinderyConfigType  OBJECT-TYPE
        SYNTAX  DisplayString 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Type of element."
        ::= { sfpsAgentBinderyConfigEntry 4 }

sfpsAgentBinderyConfigOperStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                        kStatusRunning(1),      --  all is well
                        kStatusHalted(2),       -- admin disabled
                        kStatusPending(3),      -- Trying to run, not there yet
                        kStatusFaulted(4),      -- Internal error, never will recover
                        kStatusNotStarted(5)    -- Not fully started yet
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Operational state of the entry."
        ::= { sfpsAgentBinderyConfigEntry 5 }

sfpsAgentBinderyConfigAdminStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),               -- Not running or stopped
                        disable(2),             -- Please stop
                        enable(3)               -- Go
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Administrative state of the entry."
        ::= { sfpsAgentBinderyConfigEntry 6 }


sfpsAgentBinderyConfigStatusTime  OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Time tick of last OperStatus change."
        ::= { sfpsAgentBinderyConfigEntry 7 }


sfpsAgentBinderyConfigNVStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),               -- Not running or stopped
                        disable(2),             -- Please stop
                        enable(3),              -- Go
                        unset(4)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Administrative state of the entry."
        ::= { sfpsAgentBinderyConfigEntry 8 }


--- Bindery API

sfpsAgentBinderyAPI  OBJECT IDENTIFIER ::= { sfpsAgentConfig 2 }

sfpsAgentBinderyAPIVerb  OBJECT-TYPE
        SYNTAX  INTEGER {
                getStatus(1),
                nextElem(2),
                disable(3),
                disableInNvram(4),
                enable(5),
                enableInNvram(6),
                clear(7),
                clearAll(8)
        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The BinderyAPI is a flat MIB that can be used to enable/disable
                 Bindery components, and to save the enable/disable info into
                 Nvram. The next reboot/reset, each SFPSElement will check the
                 NvramStatus and not start if disabled."
        ::= { sfpsAgentBinderyAPI 1 }

sfpsAgentBinderyAPIElementName  OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enter in the dotted notation Bindery ID (xxx.yyy.zzz) of the
                 SFPSElement you wish to perform the action."
        ::= { sfpsAgentBinderyAPI 2 }

sfpsAgentBinderyAPINVStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3),
                unset(4),
                invalid(5)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current Admin Status of this Element in Nvram."
        ::= { sfpsAgentBinderyAPI 3 }

sfpsAgentBinderyAPIAdminStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3),
                invalid(4)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current AdminStatus of the SFPSElement."
        ::= { sfpsAgentBinderyAPI 4 }

sfpsAgentBinderyAPIOperStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                running(1),
                halted(2),
                pending(3),
                faulted(4),
                notStarted(5),
                invalid(6)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current OperStatus of the SFPSElement."
        ::= { sfpsAgentBinderyAPI 5 }

sfpsAgentBinderyAPINvSet  OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Total number of SFPSElements stored in NVRAM for persistence."
        ::= { sfpsAgentBinderyAPI 6 }

sfpsAgentBinderyAPINvTotal  OBJECT-TYPE
        SYNTAX  INTEGER 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Total number of SFPSElements allocated in NVRAM. The 
                switch will always allocate enough space in NVRAM for
                the number of elements. That is, NvTotal will always be
                greater than or equal to NvSet."
        ::= { sfpsAgentBinderyAPI 7 }


sfpsAgentBinderyAPIDefaultStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3),
        unset(4),
                invalid(5)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsAgentBinderyAPI 8 }

END