NS-QOS

-- This module defines enterprise MIBs for QoS
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-QOS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    netscreenQos
        FROM NETSCREEN-SMI
    Integer32, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    ;

netscreenQosMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines the object that are used to monitor QoS"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "No Comment"
    REVISION      "200105150000Z" -- May 15, 2001
    DESCRIPTION
        "Creation Date"
    ::= { netscreenQos 0 }

NsQosPlyEntry ::= SEQUENCE
{
    nsQosPlyId            Integer32,
    nsQosPlyVsys          Integer32,
    nsQosPlyQosEnable     INTEGER,
    nsQosPlyGanBW         Integer32,
    nsQosPlyMaxBW         Integer32,--,
    nsQosPlyTraffPriority Integer32,
    nsQosPlyDSEnable      INTEGER
}

nsQosUsrShapingMode OBJECT-TYPE
    SYNTAX        INTEGER {
        off(0),
        on(1),
        on-off(2),
        off-on(3),
        auto(4)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "QoS mode set by user"
    ::= { netscreenQos 1 }

nsQosSysShapingMode OBJECT-TYPE
    SYNTAX        INTEGER {
        off(0),
        on(1),
        on-off(2),
        off-on(3),
        auto(4)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "QoS mode currently set by the system"
    ::= { netscreenQos 2 }

nsQosPly OBJECT IDENTIFIER ::= { netscreenQos 3 }

nsQosPlyTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF NsQosPlyEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "QoS is the allocation of the appropriate amount of
         network bandwidth to every user and application on an interface.
         This table collects all the QoS configuration
         setting on each physical interface."
    ::= { nsQosPly 1 }

nsQosPlyEntry OBJECT-TYPE
    SYNTAX        NsQosPlyEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each entry holds a set of attributes for QoS"
    INDEX
        { nsQosPlyId }
    ::= { nsQosPlyTable 1 }

nsQosPlyId OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A unique policy id, also used as table index."
    ::= { nsQosPlyEntry 1 }

nsQosPlyVsys OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "VSYS this policy belongs to."
    ::= { nsQosPlyEntry 2 }

nsQosPlyQosEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        off(0),
        on(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Enable QoS on this policy."
    ::= { nsQosPlyEntry 3 }

nsQosPlyGanBW OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Guaranteed Bandwidth (in bytes per second). When Qos Enable
         is off, the value has no meaning."
    ::= { nsQosPlyEntry 4 }

nsQosPlyMaxBW OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Maxium Bandwidth (in bytes per second). When Qos Enable is
         off, the value has no meaning. Negative value means it is not
         set yet."
    ::= { nsQosPlyEntry 5 }

nsQosPlyTraffPriority OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
             "Traffic priority for this policy. Zero is the highest
              priority and seven is the lowest."
        ::= { nsQosPlyEntry 6 }

nsQosPlyDSEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        off(0),
        on(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Enable DiffServ codepoint marking on this policy."
    ::= { nsQosPlyEntry 7 }
END