RUCKUS-ZD-AP-MIB

--
-- Copyright 2010-2013 Ruckus Wireless, Inc. All rights reserved.
--
-- RUCKUS WIRELESS, INC. CONFIDENTIAL - 
-- This is an unpublished, proprietary work of Ruckus Wireless, Inc., and is 
-- fully protected under copyright and trade secret laws. You may not view, 
-- use, disclose, copy, or distribute this file or any information contained 
-- herein except pursuant to a valid license from Ruckus. 
--

RUCKUS-ZD-AP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    ruckusZDWLANModule
        FROM RUCKUS-ROOT-MIB
    DisplayString,
    MacAddress,
    RowStatus,
    TruthValue
        FROM SNMPv2-TC
    OBJECT-GROUP
        FROM SNMPv2-CONF
    ifIndex,
    InterfaceIndex
        FROM IF-MIB
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Integer32,
    Unsigned32,
    IpAddress
        FROM SNMPv2-SMI;

ruckusZDAPMIB MODULE-IDENTITY
    LAST-UPDATED "201010150800Z"
    ORGANIZATION "Ruckus Wireless, Inc."
    CONTACT-INFO
        "Ruckus Wireless, Inc.

        Postal:
        350 West Java Dr.
        Sunnyvale, CA 94089
        USA

        EMail: support@ruckuswireless.com

        Phone: +1-650-265-4200"
    DESCRIPTION
        "Ruckus ZD WLAN Configuration mib"
    ::= { ruckusZDWLANModule 4 }

ruckusZDAPObjects OBJECT IDENTIFIER     ::= { ruckusZDAPMIB 1 }

ruckusZDAPConfig OBJECT IDENTIFIER    ::= { ruckusZDAPObjects 1 }


ruckusZDAPConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDAPConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD AP table."
    ::= { ruckusZDAPConfig 1 }

ruckusZDAPConfigEntry OBJECT-TYPE
    SYNTAX  RuckusZDAPConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies a ZoneDirector AP configuration per entry."
    INDEX {
        ruckusZDAPConfigID }
    ::= { ruckusZDAPConfigTable 1 }

RuckusZDAPConfigEntry ::= SEQUENCE {
  ruckusZDAPConfigID                        INTEGER,
  ruckusZDAPConfigMacAddress                MacAddress,
  ruckusZDAPConfigAPModel                   OCTET STRING,
  ruckusZDAPConfigDeviceName                OCTET STRING,
  ruckusZDAPConfigDescription               OCTET STRING,
  ruckusZDAPConfigLocation                  OCTET STRING, 
  ruckusZDAPConfigGpsLatitude               OCTET STRING,
  ruckusZDAPConfigGpsLongitude              OCTET STRING,

  ruckusZDAPConfigIPVersion                 INTEGER,
  ruckusZDAPConfigIpAddressSettingMode      INTEGER,
  ruckusZDAPConfigIpAddress                 IpAddress,
  ruckusZDAPConfigIpAddressMask             IpAddress,
  ruckusZDAPConfigGatewayIpAddress          IpAddress,
  ruckusZDAPConfigPrimaryDnsIpAddress       IpAddress,
  ruckusZDAPConfigSecondaryDnsIpAddress     IpAddress,
  
  ruckusZDAPConfigIpV6AddressSettingMode    INTEGER,
  ruckusZDAPConfigIpV6Address               OCTET STRING,
  ruckusZDAPConfigIpV6PrefixLen             INTEGER,
  ruckusZDAPConfigGatewayIpV6Address        OCTET STRING,
  ruckusZDAPConfigPrimaryDnsIpV6Address     OCTET STRING,
  ruckusZDAPConfigSecondaryDnsV6IpAddress   OCTET STRING,

  ruckusZDAPConfigRadioType                 INTEGER, 

  ruckusZDAPConfigRadioChannel24            Integer32,
  ruckusZDAPConfigRadioTxPowerLevel24       INTEGER,
  ruckusZDAPConfigRadioWlanGroup24          OCTET STRING,
  ruckusZDAPConfigRadioEnableWlanService24  INTEGER,

  ruckusZDAPConfigRadioChannel5             Integer32,
  ruckusZDAPConfigRadioTxPowerLevel5        INTEGER,
  ruckusZDAPConfigRadioWlanGroup5           OCTET STRING,
  ruckusZDAPConfigRadioEnableWlanService5   INTEGER,
 
  ruckusZDAPConfigMeshConfigurationMode     INTEGER,
  ruckusZDAPConfigUplinkSelectionMode       INTEGER,
  ruckusZDAPConfigApproveMode               INTEGER,
  ruckusZDAPConfigManagementAdmin           INTEGER,
  ruckusZDAPConfigRebootNow                 INTEGER
}

ruckusZDAPConfigID OBJECT-TYPE
    SYNTAX  INTEGER (1..5000)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "AP ID.Max value:for zd1000,50;for zd1100,100;for zd3000,500;zd5000,1000"
    ::= { ruckusZDAPConfigEntry 1 }

ruckusZDAPConfigMacAddress OBJECT-TYPE
    SYNTAX  MacAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "AP MAC Address."
    ::= { ruckusZDAPConfigEntry 2 }
    
ruckusZDAPConfigAPModel OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..64)) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "AP Model."
    ::= { ruckusZDAPConfigEntry 4 }    

ruckusZDAPConfigDeviceName OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..64)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "AP Name."
    ::= { ruckusZDAPConfigEntry 5 }

ruckusZDAPConfigDescription OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..64)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "AP Description."
    ::= { ruckusZDAPConfigEntry 6 }

ruckusZDAPConfigLocation OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..64)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "AP Location."
    ::= { ruckusZDAPConfigEntry 7 }

ruckusZDAPConfigGpsLatitude OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..16)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP GPS location measured. the range is '-90,90'."
    ::= { ruckusZDAPConfigEntry 10 }

ruckusZDAPConfigGpsLongitude OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..16)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP GPS location measured. the range is '-180,180'."
    ::= { ruckusZDAPConfigEntry 11 }
    
ruckusZDAPConfigIPVersion OBJECT-TYPE
    SYNTAX  INTEGER { ipv4(1), ipv6(2), dualstack(3),  useparentsetting(4)}
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP IP version "
    ::= { ruckusZDAPConfigEntry 14 }        

ruckusZDAPConfigIpAddressSettingMode OBJECT-TYPE
    SYNTAX  INTEGER {
            admin-by-zd(1),
            admin-by-dhcp(2),
            admin-by-ap(3) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP IP address configuration setting control.
        admin-by-zd: ap ipv4 address is set in static model by zd;
        admin-by-dhcp: ap ipv4 address is set in dhcp model by zd;
        admin-by-ap: ap ipv4 address is gotten by itself in ap."
    ::= { ruckusZDAPConfigEntry 15 }

ruckusZDAPConfigIpAddress OBJECT-TYPE
    SYNTAX  IpAddress 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP IP address."
    ::= { ruckusZDAPConfigEntry 16 }


ruckusZDAPConfigIpAddressMask OBJECT-TYPE
    SYNTAX  IpAddress 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP IP address mask."
    ::= { ruckusZDAPConfigEntry 17 }
    
ruckusZDAPConfigGatewayIpAddress OBJECT-TYPE
    SYNTAX  IpAddress 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Gateway IP Address."
    ::= { ruckusZDAPConfigEntry 20 }
    
ruckusZDAPConfigIpV6AddressSettingMode OBJECT-TYPE
    SYNTAX  INTEGER {
            admin-by-zd(1),
            admin-by-autoconfig(2),
            admin-by-ap(3) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP IPV6 address configuration setting control.
        admin-by-zd: ap ipv6 address is set in manual model by zd;
        admin-by-autoconfig: ap ipv6 address is set in autoconfig(from route server or dhcpv6 server) model by zd;
        admin-by-ap: ap ipv6 address is gotten by itself in ap."
    ::= { ruckusZDAPConfigEntry 21 }    
    
ruckusZDAPConfigIpV6Address OBJECT-TYPE
    SYNTAX  OCTET STRING  (SIZE (2..40)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP IPV6 address."
    ::= { ruckusZDAPConfigEntry 22 }


ruckusZDAPConfigIpV6PrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (3..128)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP IPV6 prefix length."
    ::= { ruckusZDAPConfigEntry 23 }   
    
ruckusZDAPConfigGatewayIpV6Address OBJECT-TYPE
    SYNTAX  OCTET STRING  (SIZE (2..40))  
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Gateway IPV6 Address."
    ::= { ruckusZDAPConfigEntry 24 }     

ruckusZDAPConfigPrimaryDnsIpAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Primary DNS IP Address."
    ::= { ruckusZDAPConfigEntry 25 }

ruckusZDAPConfigSecondaryDnsIpAddress OBJECT-TYPE
    SYNTAX  IpAddress 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Secondary DNS IP Address."
    ::= { ruckusZDAPConfigEntry 26 }
    
ruckusZDAPConfigPrimaryDnsIpV6Address OBJECT-TYPE
    SYNTAX  OCTET STRING  (SIZE (2..40))  
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Primary DNS IPV6 Address."
    ::= { ruckusZDAPConfigEntry 27 }

ruckusZDAPConfigSecondaryDnsV6IpAddress OBJECT-TYPE
    SYNTAX  OCTET STRING  (SIZE (2..40))   
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Secondary DNS IPV6 Address."
    ::= { ruckusZDAPConfigEntry 28 }    

ruckusZDAPConfigRadioType OBJECT-TYPE
    SYNTAX  INTEGER {
            ieee80211bg(1),
            ieee80211na(2),
            ieee80211a(3),
	    	ieee80211n(4),
            ieee80211ng(5),
            ieee80211ac(6) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The AP Wireless type."
    ::= { ruckusZDAPConfigEntry 30 }

ruckusZDAPConfigRadioChannel24 OBJECT-TYPE
    SYNTAX  Integer32 (0..11) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Channel selection on the 2.4 GHz radio.
         The AP radio channel, selectable 0, 1-11, 
         0    : auto channel selection,
         1-11 : specific channel selection."
    ::= { ruckusZDAPConfigEntry 31 }

ruckusZDAPConfigRadioTxPowerLevel24 OBJECT-TYPE
    SYNTAX  INTEGER (0..25)
    UNITS   "dB"
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Tx Power level selection on the 2.4 GHz radio, auto(25) | 0 to 24 corresponding to 0 to -24dB from max power.
         Now to be compatible with web, if txpower is more than 10, txpower will be set to 24(Min)."
    ::= { ruckusZDAPConfigEntry 32 }

ruckusZDAPConfigRadioWlanGroup24 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..63)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP WLAN group (name) selection on the 2.4 GHz radio."
    ::= { ruckusZDAPConfigEntry 33 }
    
ruckusZDAPConfigRadioEnableWlanService24 OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP enable wlan service flag on the 2.4 GHz radio."
    ::= { ruckusZDAPConfigEntry 34 }    

ruckusZDAPConfigRadioChannel5 OBJECT-TYPE
    SYNTAX  Integer32 (0 | 36..165) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Channel selection on the 5 GHz radio.
         The AP radio channel, selectable 0, 36-165, 
	       0    : auto channel selection,
         36-165 : specific channel selection. It is ruled by country code.Please consult the MAP of channel for each country."
    ::= { ruckusZDAPConfigEntry 40 }

ruckusZDAPConfigRadioTxPowerLevel5 OBJECT-TYPE
    SYNTAX  INTEGER (0..25)
    UNITS   "dB"
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Tx Power level selection on the 5 GHz radio, auto(25) | 0 to 24 corresponding to 0 to -24dB from max power.
         Now to be compatible with web, if txpower is more than 10, txpower will be set to 24(Min)."
    ::= { ruckusZDAPConfigEntry 41 }

ruckusZDAPConfigRadioWlanGroup5 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..63)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP WLAN group (name) selection on the 5 GHz radio."
    ::= { ruckusZDAPConfigEntry 42 }
    
ruckusZDAPConfigRadioEnableWlanService5 OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP enable wlan service flag on the 5 GHz radio."
    ::= { ruckusZDAPConfigEntry 43 }     

ruckusZDAPConfigMeshConfigurationMode OBJECT-TYPE
    SYNTAX  INTEGER {
            auto(1),
            root-ap(2),
            mesh-ap(3),       
	    disabled(4) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP Mesh network configuration mode."
    ::= { ruckusZDAPConfigEntry 50 }

ruckusZDAPConfigUplinkSelectionMode OBJECT-TYPE
    SYNTAX  INTEGER {
            smart(1),
	    manual(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The AP network uplink selection mode.
         For manual,now 'set' is not supported"
    ::= { ruckusZDAPConfigEntry 51 }

ruckusZDAPConfigApproveMode OBJECT-TYPE
    SYNTAX  INTEGER {
            approved(1),
            not-approved(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "AP approval state.
         For not-approved,'set' is not supported."
    ::= { ruckusZDAPConfigEntry 52 }

ruckusZDAPConfigManagementAdmin OBJECT-TYPE
    SYNTAX  INTEGER {
            delete(1),
            associated(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Admin action to remove this AP from the ZD management."
    ::= { ruckusZDAPConfigEntry 60 }
    
ruckusZDAPConfigRebootNow OBJECT-TYPE
    SYNTAX  INTEGER {
            reboot(1) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "AP reboot right now."
    ::= { ruckusZDAPConfigEntry 64 }
ruckusZDAPLBSInfo OBJECT IDENTIFIER    ::= { ruckusZDAPObjects 2 }    
ruckusZDAPLBSVenueTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDAPLBSVenueEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD AP LBS venue table."
    ::= { ruckusZDAPLBSInfo 1 }
ruckusZDAPLBSVenueEntry OBJECT-TYPE
    SYNTAX  RuckusZDAPLBSVenueEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies a LBS venue info per entry."
    INDEX {
        ruckusZDAPLBSAPGroupID }
    ::= { ruckusZDAPLBSVenueTable 1 }
RuckusZDAPLBSVenueEntry ::= SEQUENCE {
  ruckusZDAPLBSAPGroupID                    INTEGER,
  ruckusZDAPLBSVenueName                    OCTET STRING,
  ruckusZDAPLBSVenueAPGrpName               OCTET STRING,
  ruckusZDAPLBSVenueLSConnection            INTEGER,
  ruckusZDAPLBSVenue24GMode                 INTEGER,
  ruckusZDAPLBSVenue5GMode                  INTEGER,
}
ruckusZDAPLBSAPGroupID OBJECT-TYPE
    SYNTAX  INTEGER (1..1000)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "LBS the ID of AP group reference venue. Max value:for zd1000,8;for 
        zd1100,32;for zd3000,256;zd5000,512."
    ::= { ruckusZDAPLBSVenueEntry 1 }
ruckusZDAPLBSVenueName OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..16))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Vneue name"
    ::= { ruckusZDAPLBSVenueEntry 2 }
ruckusZDAPLBSVenueAPGrpName OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (1..32))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "AP group name has referenced this venue"
    ::= { ruckusZDAPLBSVenueEntry 3 }
ruckusZDAPLBSVenueLSConnection OBJECT-TYPE
    SYNTAX  INTEGER {
            down(0), up(1) } 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "LS connection status"
    DEFVAL{down}
    ::= { ruckusZDAPLBSVenueEntry 4 }    
ruckusZDAPLBSVenue24GMode OBJECT-TYPE
    SYNTAX  INTEGER {
            disable(0), footfall(1), calibration(2) } 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "2.4G band mode"
    DEFVAL{disable}    
    ::= { ruckusZDAPLBSVenueEntry 5 }   
ruckusZDAPLBSVenue5GMode OBJECT-TYPE
    SYNTAX  INTEGER {
            disable(0), footfall(1), calibration(2) } 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "5G band mode"
    DEFVAL{disable}
    ::= { ruckusZDAPLBSVenueEntry 6 }    
    
END