build_all.sh

#!/bin/bash
#
# Lakka build script
#
# This script builds images for all supported platforms/target devices listed in
# the 'targets' variable.
#
# By default (./build_all.sh) it starts in dashboard mode, showing a dashboard
# with the current status of the build job and not bailing out after unsuccessful
# build job (tries to build all targets in one run and then show failed targets
# at the end).
#
# To run in log mode:
# $ DASHBOARD_MODE=off ./build_all.sh
# Or instead of 'off' you can use any other value, e. g. 'foo', except 'yes'
#
# To bail out after first failure:
# $ BAILOUT_FAILED=yes ./build_all.sh
# or instead of 'yes' you can use any other value, e. g. 'bar', except 'no'

# by default start in dashboard mode
[ -z "${DASHBOARD_MODE}" ] && DASHBOARD_MODE="yes"

# trap CTRL+C in dashboard mode, as the build job runs in background, we have to tell the user to wait
[ "${DASHBOARD_MODE}" = "yes" ] && trap control_c_pressed INT

CONTROL_C_PRESSED=0

control_c_pressed() {
	CONTROL_C_PRESSED=1
}

# by default do not bail out after failed build
[ -z "${BAILOUT_FAILED}" ] && BAILOUT_FAILED="no"

# by default reload dashboard / status file every 0.5 seconds
[ -z "${REFRESH_RATE}" ] && rr="0.5s" || rr="${REFRESH_RATE}"

# by default do not stop immediately when a build of a package fails, but finish building active packages
[ -z "${QUICKFAIL}" ] && qf="no" || qf="${QUICKFAIL}"

# number of buildthreads = two times number of cpu threads, unless specified otherwise
tc=""
bt=""
if [ -z "${THREADCOUNT}" ]
then
	if [ -n "$(which nproc)" ]
	then
		bt=$(nproc)
	fi
else
	bt="${THREADCOUNT}"
fi
tc="THREADCOUNT=${bt}"

# set / unset verbose mode for some commands
[ "${DASHBOARD_MODE}" = "yes" ] && v="" || v="-v"

# remove any existing images / release files
check=$(ls target/ 2>/dev/null | wc -l)
if [ ${check} -gt 0 ]
then
	echo -en "\nWARNING!!!\nThere are ${check} item(s) in target/, really remove them?\n(press y to confirm, anything else to abort) "
	read -rn1 keypress
	if [ "${keypress}" = "y" -o "${keypress}" = "Y" ]
	then
		echo -en "\nCleaning up target/ ... "
		rm -rf target/
		echo "done."
	else
		echo -e "\nAborted!"
		exit
	fi
fi

# list of targets/platforms in structure PROJECT|DEVICE|ARCH|make_rule

targets="\
	Allwinner|A64|aarch64|image \
	Allwinner|H2-plus|arm|image \
	Allwinner|H3|arm|image \
	Allwinner|H5|aarch64|image \
	Allwinner|H6|aarch64|image \
	Allwinner|H616|aarch64|image \
	Allwinner|R40|arm|image \
	Amlogic|AMLGX|aarch64|image \
	Ayn|Odin|aarch64|image \
	Generic|Generic|i386|image \
	Generic|Generic|x86_64|image \
	Generic|wayland|x86_64|image \
	Generic|x11|x86_64|image \
	L4T|Switch|aarch64|image \
	NXP|iMX6|arm|image \
	NXP|iMX8|aarch64|image \
	RPi|RPi|arm|image \
	RPi|RPi2|arm|image \
	RPi|RPi3|aarch64|image \
	RPi|RPi4-GPiCase2|aarch64|image \
	RPi|RPi4-PiBoyDmg|aarch64|image \
	RPi|RPi4-RetroDreamer|aarch64|image \
	RPi|RPi4|aarch64|image \
	RPi|RPi5|aarch64|image \
	RPi|RPiZero-GPiCase|arm|image \
	RPi|RPiZero2-GPiCase|arm|image \
	RPi|RPiZero2-GPiCase2W|aarch64|image \
	Rockchip|RK3288|arm|image \
	Rockchip|RK3328|aarch64|image \
	Rockchip|RK3399|aarch64|image \
	Samsung|Exynos|arm|image \
	"

# set the number of total build jobs and initialize counter for current build job
total=$(echo ${targets} | wc -w)
declare -i current=0

# initialize variables for list and count of failed builds and count of good jobs
failed_targets=""
declare -i failed_jobs=0
declare -i good_jobs=0
SKIP_ANNOUNCED=0

for target in ${targets}
do
	current+=1

	distro="Lakka"
	IFS='|' read -r -a build  <<< "${target}"
	project=${build[0]}
	device=${build[1]}
	arch=${build[2]}
	out=${build[3]}
	target_name=${device:-$project}.${arch}

	if [ ${SKIP_ANNOUNCED} -eq 1 ]
	then
		echo -e "\t${target_name}"
		continue
	fi

	# initialize return value of the non-dashboard job
	ret_nondb=0

	# initialize result variable for dashboard job
	ret_dashboard=0

	# initialize result variable for release files
	ret_release=0

	# set status file
	statusfile="build.${distro}-${target_name}*/.threads/status"

	echo "Starting build of ${target_name}"
	if [ "${DASHBOARD_MODE}" != "yes" ]
	then
		# show logs during build (non-dashboard build)
		make ${out} OFFICIAL=yes PROJECT=${project} DEVICE=${device} ARCH=${arch} MTIMMEDIATE=${qf} ${tc}
		ret_nondb=${?}
		if [ ${ret_nondb} -gt 0 -a "${BAILOUT_FAILED}" != "no" ]
		then
			exit ${ret_nondb}
		fi
	else
		# remove the old dashboard, so we don't show old/stale dashboard
		rm -f ${statusfile}
		# start the build process in background
		make ${out} OFFICIAL=yes PROJECT=${project} DEVICE=${device} ARCH=${arch} MTIMMEDIATE=${qf} ${tc} &>/dev/null &
		# store the pid
		pid=${!}
		finished=0

		while [ ${finished} -eq 0 ]
		do
			# check if the build process is still running
			ps -q ${pid} &>/dev/null
			ret_ps=${?}
			s_failed="s"
			[ ${failed_jobs} -eq 1 ] && s_failed=""
			s_good="s"
			[ ${good_jobs} -eq 1 ] && s_good=""
			statusline="Build job ${current}/${total}, so far ${good_jobs} successful build${s_good}, ${failed_jobs} failed build${s_failed}"
			if [ ${ret_ps} -eq 0 ]
			then
				# build process is still running, show the dashboard
				if [ -f ${statusfile} ]
				then
					cat ${statusfile}
					if [ $(cat ${statusfile} | wc -l) -gt 2 ]
					then
						echo ""
						echo "${statusline}"
						[ ${CONTROL_C_PRESSED} -eq 1 ] && echo "*** Control-C was pressed, please wait until current build finishes ***"
					fi
					# check if all packages have been built
					pkgs_stat=$(head -n 1 ${statusfile} | cut -d" " -f5,7)
					pkgs_done=${pkgs_stat%% *}
					pkgs_todo=${pkgs_stat##* }
					if [ -n "${pkgs_done}" -a -n "${pkgs_todo}" ]
					then
						if [ ${pkgs_done} -eq ${pkgs_todo} ]
						then
							finished=1
							# show the dashboard and status line one last time
							cat ${statusfile}
							echo ""
							echo "${statusline}"
							[ ${CONTROL_C_PRESSED} -eq 1 ] && echo "*** Control-C was pressed, please wait until current build finishes ***"
						else
							sleep ${rr}
						fi
					else
						sleep ${rr}
					fi
				fi
			else
				# build process is not running anymore
				finished=1
				if [ -f ${statusfile} ]
				then
					# show the dashboard
					cat ${statusfile}
					echo ""
					echo "${statusline}"
					[ ${CONTROL_C_PRESSED} -eq 1 ] && echo "*** Control-C was pressed, please wait until current build finishes ***"
					# check if there are any failed jobs in the dashboard
					failed_count=$(cat ${statusfile} | grep "^\[" | cut -d' ' -f 2 | grep FAILED | wc -l)
					if [ ${failed_count} -gt 0 ]
					then
						ret_dashboard=1
						if [ "${BAILOUT_FAILED}" != "no" ]
						then
							echo "Build of some package(s) failed:"
							echo ""
							echo "Job id | Package name"
							echo "------.+------------------"
							cat ${statusfile} | grep "FAILED" | sed -e "s/^\[/ /" | sed -e "s/\]\ /  /" | sed -e "s/\// /" | cut -d' ' -f 3,8 | sed -e "s/\ /   | /" | sed -e "s/^/ /"
							echo ""
							echo "Check the logs in build.${distro}.${target_name}*/.threads/logs/<job_id>/"
							exit ${failed_count}
						fi
					fi
				else
					# no dashboard and build process finished - we did not build anything
					ret_dashboard=1
					if [ "${BAILOUT_FAILED}" != "no" ]
					then
						echo "Build job for ${target_name} was probably not started (no dashboard file found)."
						echo "Try running the build manually:"
						echo "PROJECT=${project} DEVICE=${device} ARCH=${arch} IGNORE_VERSION=${iv} make ${out}"
						exit 127
					fi
				fi
			fi
		done

		# in case the build job is still running, it means it is creating the release files/images
		if [ ${ret_ps} -eq 0 ]
		then
			echo -n "Creating release files / images..."
			wait ${pid}
			ret_release=${?}
			count=$(ls target/${distro}-${target_name}-*{.img.gz,kernel,system}* 2>/dev/null | wc -l)
			if [ ${count} -gt 0 -a ${ret_release} -eq 0 ]
			then
				echo "done!"
			else
				if [ ${count} -eq 0 ]
				then
					echo "failed - no release files found!"
					echo -e "\nWARNING: No release files / images were found, skipping md5 checksum / mv to release folder!"
				else
					echo "failed - some release files were not created!"
					echo -e "\nWARNING: Some release files / images may be missing!"
				fi
			fi
		fi

	fi

	if [ ${ret_nondb} -gt 0 -o ${ret_dashboard} -gt 0 ]
	then
		# record the failed build
		failed_jobs+=1
		failed_packages=""
		list=$(cat ${statusfile} | grep "FAILED" | cut -d' ' -f 5-)
		for pkg in ${list}
		do
			failed_packages+="${pkg##*( )} "
		done
		failed_targets+="${target_name} - ${failed_packages}\n"
	elif [ ${count} -gt 0 ]
	then
		# store the release files in platform/target folder
		if [ ${ret_release} -gt 0 ]
		then
			failed_jobs+=1
			failed_targets+="${target_name} - check release files!\n"
		else
			good_jobs+=1
		fi

		cd target
		mkdir -p ${target_name}

		# move release files to the folder
		[ "${DASHBOARD_MODE}" = "yes" ] && echo -n "Moving release files (.img.gz, .tar) to subfolder..."
		for file in Lakka-${target_name}-*{.img.gz,.tar}*
		do
			[ -f "${file}" ] && mv ${v} ${file} ${target_name}/
		done
		[ "${DASHBOARD_MODE}" = "yes" ] && echo "done!"
		# remove files we do not use
		[ "${DASHBOARD_MODE}" = "yes" ] && echo -n "Removing unused files (.ova,kernel,system)..."
		rm -f ${v} Lakka-${target_name}-*.{ova,kernel,system}*
		[ "${DASHBOARD_MODE}" = "yes" ] && echo "done!"
		if [ "${target_name}" = "Switch.aarch64" ]
		then
			if [ -x $(which 7za 2>/dev/null) ]
			then
				[ "${DASHBOARD_MODE}" = "yes" ] && echo -n "Creating 7z archive for ${target_name}..."
				cd ${target_name}
				basename=$(basename $(ls Lakka-${target_name}-*.tar | head -n 1) .tar)
				if [ -n "${basename}" ]
				then
					tar xf ${basename}.tar
					cd ${basename}
					7za a -r ../${basename}.7z * 2>&1 > /dev/null
					cd ..
					rm -r ${basename}
				fi
				cd ..
				[ "${DASHBOARD_MODE}" = "yes" ] && echo "done!"
			fi
		fi
		cd ..
	else
		# build OK, but no release files were created
		failed_jobs+=1
		failed_targets+="${target_name} - no release files!\n"
	fi
	if [ ${CONTROL_C_PRESSED} -eq 1 -a ${SKIP_ANNOUNCED} -eq 0 ]
	then
		echo "Skipping remaining builds:"
		SKIP_ANNOUNCED=1
	fi
done

if [ $failed_jobs -gt 0 ]
then
	echo -e "\nFailed ${failed_jobs} build(s):\n${failed_targets}:-(" >&2
else
	echo -e "\nAll successful!\n:-)"
fi

exit $failed_jobs