forked from QQting/88x2bu-20210702
-
Notifications
You must be signed in to change notification settings - Fork 0
/
88x2bu.conf
178 lines (173 loc) · 4.35 KB
/
88x2bu.conf
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
# /etc/modprobe.d/88x2bu.conf
#
# Purpose: Allow easy access to specific driver options.
#
# Edit the following line to change, add or delete options:
options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgnt=1 rtw_switch_usb_mode=0
#
# After editing is complete, save this file (if using nano: Ctrl + x, y, Enter)
# and reboot to activate the changes.
#
# Documentation:
#
# -----
#
# Log options ( rtw_drv_log_level )
#
# 0 = NONE (default)
# 1 = ALWAYS
# 2 = ERROR
# 3 = WARNING
# 4 = INFO
# 5 = DEBUG
# 6 = MAX
#
# Note: You can save a log file that only includes RTW log entries by running
# the following in a terminal:
#
# sudo ./save-log.sh
#
# Note: The name of the log file will be ```rtw.log```.
#
# -----
#
# LED options ( rtw_led_ctrl )
#
# 0 = Always off
# 1 = Normal blink (default)
# 2 = Always on
#
# -----
#
# VHT options ( rtw_vht_enable )
#
# 0 = Disable
# 1 = Enable (default)
# 2 = Force auto enable (use only for 5 GHz AP mode)
#
# Notes:
# - A non-default setting can degrade performance greatly in managed mode.
# - Option 2 allows 80 MHz channel width for 5GHz AP mode, such as when
# you are using hostapd.
#
# -----
#
# Power options ( rtw_power_mgnt )
#
# 0 = Disable power saving
# 1 = Power saving on, minPS (default)
# 2 = Power saving on, maxPS (not recommended for AP mode)
#
# -----
#
# Beamforming options ( rtw_beamform_cap )
#
# 0 = Disable (default)
# 1 = SU Beamformer
# 2 = SU Beamformee
# 3 = SU Beamformer and SU Beamformee
# 10= SU Beamformee and MU Beamformee
# 11= SU Beamformer and SU Beamformee and MU Beamformee
#
# Note: MU Beamformer is not supported.
#
# -----
#
# Country Code options ( rtw_country_code )
#
# Note: Allows the Country Code to be set in cases where it is unable to
# be obtained from the operating system.
#
# Example for the US: rtw_country_code=US
# Example for Panama: rtw_country_code=PA
# Example for Norway: rtw_country_code=NO
# Example for Kuwait: rtw_country_code=KW
# Example for Taiwan: rtw_country_code=TW
#
# -----
#
# DFS Options ( rtw_dfs_region_domain )
#
# 0 = NONE (default)
# 1 = FCC
# 2 = MKK
# 3 = ETSI
#
# Notes:
# - Activates DFS channels in AP mode.
# - DFS FCC 80 MHz channels for hostapd: 52(58), 100(106), 116(122) and 132(138)
# - For more information: https://en.wikipedia.org/wiki/List_of_WLAN_channels
#
# Note: An AP needs to listen on a DFS channel for a period of 60 seconds
# before transmitting on the channel. If any radar pulses are detected,
# the AP cannot use that channel and will have to try a different channel.
#
# -----
#
# Select P2P interface in concurrent mode ( rtw_sel_p2p_iface )
#
# 0 = Sets interface 0 to be p2p interface
# 1 = Sets interface 1 to be p2p interface (default)
#
# -----
#
# Wireless Mode options ( rtw_wireless_mode )
#
# 1 = 2.4GHz 802.11b
# 2 = 2.4GHz 802.11g
# 3 = 2.4GHz 802.11b/g
# 4 = 5GHz 802.11a
# 8 = 2.4Hz 802.11n
# 11 = 2.4GHz 802.11b/g/n
# 16 = 5GHz 802.11n
# 20 = 5GHz 802.11a/n
# 64 = 5GHz 802.11ac
# 84 = 5GHz 802.11a/n/ac
# 95 = 2.4GHz 802.11b/g/n 5GHz 802.11a/n/ac (default)
#
# -----
#
# USB options ( rtw_switch_usb_mode )
#
# 0 = No switch (default)
# 1 = Switch from usb 2.0 to usb 3.0
# 2 = Switch from usb 3.0 to usb 2.0
#
# Note: This driver may need to stay in USB2 mode for AP mode operations
# on some platforms in order to avoid dropping offline. This issue has been
# observed on the Raspberry Pi 4B with both the 32 and 64 bit versions of the
# Raspberry Pi OS. This problem appears to be specific to the Raspberry Pi 4B
# and adapters based on the rtl8812bu chipset.
#
#
# -----
#
# To see all options that are available:
#
# $ ls /sys/module/88x2bu/parameters/
#
# -----
#
# To see the values that are in use:
#
# $ grep [[:alnum:]] /sys/module/88x2bu/parameters/*
#
# -----
#
# hostapd setup information for rtl88x2bu
# Note: The best settings can vary but the following may be a good place to start.
#
# /etc/modprobe.d/88x2bu.conf
# options 88x2bu rtw_drv_log_level=0 rtw_led_ctrl=0 rtw_vht_enable=2 rtw_power_mgnt=1 rtw_beamform_cap=0 rtw_dfs_region_domain=1 rtw_switch_usb_mode=1
#
# Note: The best setting for `rtw_dfs_region_domain=` will depend on your location.
#
# /etc/hostapd/hostapd.conf
#
# hw ht capab: 0x963
# ht_capab=[LDPC][HT40+][HT40-][SHORT-GI-20][SHORT-GI-40][MAX-AMSDU-7935]
#
# hw vht capab: 0x03c001a2
# vht_capab=[MAX-MPDU-11454][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][HTC-VHT][MAX-A-MPDU-LEN-EXP7]
#
# -----