EDUP Wifi 6 AX1800 Module load but didn't start

[andreas1983a]

Hello, i have create the source succesfully with sh install-driver.sh
If i plug in the device the module load but it not start the device and i didn't became a interface name.

My device:
EDUP EP-AX 1697

I have insert following string to os_dep/linux/usb_intf.c file before i compile the source:
#ifdef CONFIG_RTL8852B
/=== Realtek demoboard ===/
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDER_ID_REALTEK, 0xB832, 0xff, 0xff, 0xff), .driver_info = RTL8852B},
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDER_ID_REALTEK, 0xB83A, 0xff, 0xff, 0xff), .driver_info = RTL8852B},
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDER_ID_REALTEK, 0xB852, 0xff, 0xff, 0xff), .driver_info = RTL8852B},
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDER_ID_REALTEK, 0xB85A, 0xff, 0xff, 0xff), .driver_info = RTL8852B},
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDER_ID_REALTEK, 0xA85B, 0xff, 0xff, 0xff), .driver_info = RTL8852B},
{USB_DEVICE_AND_INTERFACE_INFO(0x0586, 0x3428, 0xff, 0xff, 0xff), .driver_info = RTL8852B},
{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x1a62, 0xff, 0xff, 0xff), .driver_info = RTL8852B},
{USB_DEVICE_AND_INTERFACE_INFO(0x0bda, 0x8832, 0xff, 0xff, 0xff), .driver_info = RTL8852B}, //EDUP EP-AX 1697

lsusb:
Bus 001 Device 003: ID 0bda:8832 Realtek Semiconductor Corp. 802.11ax WLAN Adapter

dmesg:
[ 80.873376] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 80.974138] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=8832, bcdDevice= 0.00
[ 80.974165] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 80.974182] usb 1-1.3: Product: 802.11ax WLAN Adapter
[ 80.974197] usb 1-1.3: Manufacturer: Realtek
[ 80.974210] usb 1-1.3: SerialNumber: 00e04c000001
[ 81.277183] 8852bu: loading out-of-tree module taints kernel.
[ 81.317512] usbcore: registered new interface driver rtl8852bu

dkms status:
root@rpi4b:/home/pi/rtl8852bu# dkms status
rtl8852bu/1.19.3, 6.1.21-v8+, aarch64: installed

root@rpi4b:/home/pi/rtl8852bu# lsmod |grep 8852
8852bu 4423680 0
cfg80211 925696 1 8852bu

I hope everyone can help me to start the device.
Sorry for my bad english.

[morrownr]

Wrong driver. Please use

$ sudo sh remove-driver.sh

and then try the following driver:

https://github.com/lwfinger/rtl8852au