nut-scanner depends on development files #233
Comments
netbsd-srcmastr
pushed a commit
to NetBSD/pkgsrc
that referenced
this issue
Sep 21, 2018
Notable changes: * GPLv2 or GPLv3 as license; * c++ lang addition; * upsdrvctl moved from libexec/ to sbin/ (thanks systemd), reflect this change in rc.d script; * the timeout patch (patch-ab) has been implemented differently, but an error message has been left out. Move it to patch-snmp-error-msg.c; * tiff buildlink3 for ups-nut-cgi required (in addition to gd). Changelog: (lengthy -- if truncated please refer to): http://www.networkupstools.org/source/2.7/ChangeLog 2016-03-09 Arnaud Quette <[email protected]> * configure.ac: Fix autoreconf on Debian For some reason, Automake doesn't search the current directory correctly when searching for helper scripts, when 'nut' is running as a git-submodule, as it is the case with the website repository * configure.ac: update version to 2.7.4 * drivers/apc-ats-mib.c: snmp-ups: add APC ATS input.source * drivers/snmp-ups.c: snmp-ups: fix the matching OID tests For both sysOID and classic methods, we used to test one of the two OIDs provided in the mib2nut structures. However, these two OIDs (oid_pwr_status and oid_auto_check) tend to be redundant and confusing. Replace these matching by an extraction of {ups,device}.model * drivers/nut-libfreeipmi.c: nut-ipmipsu: fix compilation warnings * NEWS, UPGRADING, docs/FAQ.txt, docs/net-protocol.txt, docs/new- drivers.txt, docs/nut-names.txt, docs/nutdrv_qx-subdrivers.txt, docs/packager-guide.txt, docs/snmp-subdrivers.txt, lib/README, scripts/augeas/README: Fix spelling and typo errors Following the spell-checking scope expansion, do a spell-checking pass * docs/documentation.txt: Update documentation as per the new devices scope * docs/features.txt, docs/user-manual.txt: Update documentation as per the new devices scope * docs/Makefile.am: Expand spell-checking scope Add more documents, outside of the docs/ directory Closes: https://github.com/networkupstools/nut/issues/222 2016-03-08 Arnaud Quette <[email protected]> * configure.ac, tools/Makefile.am, tools/driver-list-format.sh: Check driver.list[.in] format at make dist time Instead of checking driver.list.in at configure time, move the checking and modification into a script that is called at make dist time. The script can also be called manually, and will try to fix both driver.list.in and driver.list 2016-03-07 Arnaud Quette <[email protected]> * drivers/powerware-mib.c: Remove an erroneous test This was made test the enumerated values registration in snmp-ups, and should not have been committed * data/driver.list.in: HCL: APC ATS AP7724 supported by snmp-ups These Automatic Transfer Switch should be supported by snmp-ups, however this was not tested at all Reference: https://github.com/networkupstools/nut/issues/260 * NEWS, UPGRADING: Update for release 2.7.4 * drivers/Makefile.am, drivers/apc-ats-mib.c, drivers/apc-ats-mib.h, drivers/snmp-ups.c: snmp-ups: support APC Automatic Transfer Switch Following the recent extension of NUT scope and variable namespace, to support Automatic Transfer Switch (ATS), implement SNMP support for APC ATS (with help from "maaboo" through github) Reference: https://github.com/networkupstools/nut/issues/260 2016-03-04 Arnaud Quette <[email protected]> * drivers/baytech-mib.c, drivers/bestpower-mib.c, drivers/compaq- mib.c, drivers/cyberpower-mib.c, drivers/eaton-mib.c, drivers/mge- mib.c, drivers/netvision-mib.c, drivers/powerware-mib.c, drivers /raritan-pdu-mib.c: snmp-ups: fix mib2nut structures Non existent OIDs, for testing MIB selection, must be expressed as NULL and not as empty string ("") for the algorithm to work 2016-03-03 Daniele Pezzini <[email protected]> * docs/download.txt: docs: update several download links 2016-03-03 Arnaud Quette <[email protected]> * docs/man/upsrw.txt, docs/net-protocol.txt: Clarification on NUMBER type float values Clarify a bit more documentation on how to express float values, when using upsrw. That is to say, using decimal (base 10) english-based representation, so using a dot, in non-scientific notation. So hexadecimal, exponents, and comma for thousands separator are forbiden * clients/upsrw.c, docs/net-protocol.txt, server/netget.c: Prefer NUMBER to NUMERIC for variable type As per discussion on the Github pull request, NUMBER would be more suitable than NUMERIC 2015-11-22 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx.c: nutdrv_qx: increase timeouts in 'sgs' USB subdriver Apparently the previously used timeouts in the 'sgs' USB subdriver were not always enough, so increase them. 2015-11-11 Daniele Pezzini <[email protected]> * data/driver.list.in: HCL: various TS Shara UPSes supported by nutdrv_qx Protocol: 'megatec' USB subdriver: 'sgs' * drivers/nutdrv_qx.c: nutdrv_qx: make sure 'sgs' USB subdriver uses only what it reads Since, in 'sgs' USB subdriver, we read only 8 bytes at a time and we expect the first byte to tell us the length of the data that follows, make sure we don't use more than what we read from the device in case the first byte is not what we expect it to be. 2015-03-04 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx.c: nutdrv_qx: increase verbosity of 'sgs' USB subdriver In 'sgs' USB subdriver: - be more verbose when debugging, - always print the return code when dealing with an error. 2014-01-31 Daniele Pezzini <[email protected]> * docs/man/nutdrv_qx.txt: nutdrv_qx: update man page for new 'sgs' USB subdriver 2014-01-31 Ronaldo Yamada <[email protected]> * drivers/nutdrv_qx.c: nutdrv_qx: add new 'sgs' USB subdriver to support TS Shara units 2016-03-02 Arnaud Quette <[email protected]> * data/driver.list.in: HCL: added Eaton Powerware 9125-5000g Supported with the additional USB card, with the bcmxcp_usb driver * docs/man/upsrw.txt, docs/net-protocol.txt: Clarification on NUMERIC type float values Clarify documentation on how to express float values, when using upsrw. That is to say, using decimal english- based representation, so using a dot * drivers/mge-xml.c: netxml-ups: fix Eaton XML published data Some raw protocol data were wrongly published, and are now commented. Also add some R/W flags to ambient thresholds Closes: https://github.com/networkupstools/nut/issues/201 * tools/nut-scanner/nut-scanner.c: nut-scanner: fix thread attachment Add a test to have the right thread waiting for the scan to be complete (patch from Michal Hlavinka, Red Hat) * configure.ac, tools/nut-scanner/nutscan-init.c, tools/nut- scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c, tools/nut- scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut- scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c: nut-scanner: don't depend on development libraries nut-scanner was previously trying to use directly libXXX.so (libusb-0.1, libfreeipmi, libnetsnmp, libavahi-client, libneon, libupsclient}. However, these files are generally provided by the development packages. nut- scanner now tries to look at some known paths, including the one provided through --libdir, to find the correct libraries Closes: https://github.com/networkupstools/nut/issues/233 2016-03-01 Arnaud Quette <[email protected]> * clients/upsrw.c, docs/net-protocol.txt, server/netget.c: Default to type NUMERIC for variables Any variable that is not STRING, RANGE or ENUM is just a simple numeric value. The protocol documentation (net-protocol.txt) was previously stating that "The default <type>, when omitted, is integer." which was not fully true, since a variable could also be a float. Hence, the wording was changed to advertise this, and that each driver is then responsible for handling values as either integer or float. Moreover, instead of returning a TYPE "UNKNOWN", return "NUMERIC", which is more suitable, and aligned with the NUT protocol specification * tools/nut-snmpinfo.py: SNMP subdriver generator: fix output formatting * tools/nut-snmpinfo.py: SNMP subdriver generator: discard commented lines Discard any commented mib2nut_info_t declaration, which should thus not be taken into account 2016-02-26 Arnaud Quette <[email protected]> * data/driver.list.in, drivers/Makefile.am, drivers/eaton-ats-mib.c, drivers/eaton-ats-mib.h, drivers/snmp-ups.c: snmp-ups: support Eaton Automatic Transfer Switch Following the recent extension of NUT scope and variable namespace, to support Automatic Transfer Switch (ATS), implement SNMP support for Eaton ATS. Note that this device can also be supported through Eaton XML/PDC (XML over HTTP) protocol, supported by the NUT netxml-ups driver * data/cmdvartab, docs/nut-names.txt: Extend namespace for Automatic Transfer Switch (ATS) Extend NUT namespace to support a new type of power device: ATS - Automatic Transfer Switch. These devices are used to setup 2 power systems, such as UPS, to power a single power supply system, and be able to automatically transfer between the input sources in case of failure of the primary one. The added variable are for now limited to 'input.source' and 'input.source.preferred', but may be extended if needed 2016-02-25 C Fraire <[email protected]> * docs/scheduling.txt: Fix docs location of upssched to sbin 2016-02-25 Arnaud Quette <[email protected]> * scripts/subdriver/gen-snmp-subdriver.sh: snmp-ups: add the last missing element in the structure * drivers/apc-mib.c, drivers/bestpower-mib.c, drivers/compaq-mib.c, drivers/cyberpower-mib.c, drivers/delta_ups-mib.c, drivers/huawei- mib.c, drivers/ietf-mib.c, drivers/mge-mib.c, drivers/netvision- mib.c, drivers/powerware-mib.c, drivers/xppc-mib.c, scripts/subdriver/gen-snmp-subdriver.sh: snmp-ups: fix values lookup terminating element The terminating element should really be NULL, and not the string "NULL", as it was originally done, back in 2002 * drivers/snmp-ups.c: snmp-ups: revert order of the NULL/"NULL" test Fix a segfault when doing first the string comparison test * drivers/snmp-ups.c: snmp-ups: register values enumerations Whenever there is a values lookup structure for read/write data, push the values as enumerations for upsrw * drivers/snmp-ups.c: snmp-ups: try to lookup values for numeric elements Numeric elements can also use the value resolution mechanism * drivers/snmp-ups.c: snmp-ups: counter test sysOID with a test OID Some devices have buggy sysOID exposed. Allow to counter test another OID, to be able to select between different mapping structures 2016-02-24 Arnaud Quette <[email protected]> * scripts/subdriver/gen-snmp-subdriver.sh: SNMP subdriver creation script: allow sysOID override Allow to use -s to override buggy sysOID in some device FW. In this case, the sysOID entry in the mib2nut structure should be set to NULL 2016-02-11 Arnaud Quette <[email protected]> * drivers/raritan-pdu-mib.c: snmp-ups: fix macaddr support for Raritan PDU Raritan MIB was fixed to expose macaddr on device.macaddr instead of ups.macaddr * drivers/baytech-mib.c: snmp-ups: fix macaddr support for Baytech PDU Baytech MIB was fixed to expose macaddr on device.macaddr instead of ups.macaddr * drivers/eaton-mib.c: snmp-ups: fix and complete macaddr support for Eaton Eaton G2 and G3 can now expose the MAC address of the device, using device.macaddr. Eaton G1 Aphel was fixed to expose this data on device.macaddr instead of ups.macaddr * drivers/snmp-ups.c: snmp-ups: add support for hexadecimal octet strings * drivers/snmp-ups.c: snmp-ups: fallback for classic MIB detection If the sysOID matching has failed, then snmp-ups uses ups.model to get an OID to test. In case ups.model is not available, fallback to trying to use device.model instead * docs/images/nut_layering.png, docs/images/nut_layering.svg: Refresh and complete NUT architecture diagram 2016-02-08 Arnaud Quette <[email protected]> * drivers/powerware-mib.c: snmp-ups: extend Eaton 3ph outputSource values map Add the new status values for xupsOutputSource (.1.3.6.1.4.1.534.1.4.5.0), that maps to both ups.status and ups.type 2016-02-03 Arnaud Quette <[email protected]> * drivers/powerware-mib.c: snmp-ups: improve support for Eaton 3ph Improve support for temperature and humidity data, including: - ups.temperature now available - fixing ambient.temperature (previously pointing at a wrong OID) - ambient.humidity now available - the following settings now available: * ups.temperature.low * ups.temperature.high * ambient.humidity.high * ambient.humidity.low * ambient.temperature.high * ambient.temperature.low 2016-02-01 Daniele Pezzini <[email protected]> * data/driver.list.in: HCL: various APCUPSD-controlled APC devices via apcupsd-ups Originally reported by GitHub user @Thermionix. Reference: https://github.com/networkupstools/nut/pull/215 2016-01-31 Charles Lepple <[email protected]> * docs/man/nutdrv_atcl_usb.txt: man/nutdrv_atcl_usb: point to nutdrv_qx (fuji) for 0001:0000 Also update best guess for the USB- to-serial converter situation. * docs/FAQ.txt: FAQ: udevadm for fixing permissions 2016-01-30 Charles Lepple <[email protected]> * drivers/nut-libfreeipmi.c: FreeIPMI: do not split function arguments with a conditional Alternate approach to suggestion by Romero B. de S. Malaquias Closes: https://github.com/networkupstools/nut/pull/250 2016-01-24 Charles Lepple <[email protected]> * docs/config-notes.txt: Documentation: fix formatting Put syntax examples in verbatim mode, and remove spaces from ends of lines. * drivers/apc-hid.c: usbhid-ups: handle missing USB strings in APC code Closes: https://github.com/networkupstools/nut/issues/258 Might fix: https://bugs.launchpad.net/ubuntu/+source/nut/+bug/1483615 2016-01-23 Charles Lepple <[email protected]> * data/driver.list.in: HCL: added NHS Laser Senoidal 5000VA Source: http://article.gmane.org/gmane.comp.monitoring.nut.devel/7123 Closes: https://github.com/networkupstools/nut/issues/254 2016-01-14 Arnaud Quette <[email protected]> * drivers/snmp-ups.c: snmp-ups: fix staleness detection With some ePDUs or devices using template for outlet and outlet.group, communication loss with the device were not detected, due to the handling mechanism. Simply skipping commands for templates, after the init time, is sufficient to avoid this issue 2016-01-05 Arnaud Quette <[email protected]> * drivers/snmp-ups.c: snmp-ups: improve stale communication recovery Disable the 10 iterations to retry communicating with stale device. This was leading up to 10 x 30 seconds, so 5mn, before being able to get data again * docs/new-drivers.txt, docs/nut-names.txt: Document battery.charger.status This will in time replace the historic CHRG and DISCHRG flags published in ups.status. Closes https://github.com/networkupstools/nut/issues/196 2016-01-03 Charles Lepple <[email protected]> * data/driver.list.in: HCL: Sweex model P220 via blazer_usb Reference: https://github.com/networkupstools/nut/issues/251 2016-01-04 Arnaud Quette <[email protected]> * drivers/ietf-mib.c, drivers/ietf-mib.h, drivers/snmp-ups.c: snmp- ups: add support for Tripplite units on IETF mib These devices expose ".1.3.6.1.4.1.850.1", which could be supported through this specific MIB. For now, just link that to the IETF MIB, to provide a first level of support Reference: https://github.com/networkupstools/nut/issues/171 2015-12-30 Arnaud Quette <[email protected]> * configure.ac: First stab at checking driver.list.in format 2015-12-29 Charles Lepple <[email protected]> * scripts/upower/95-upower-hid.rules: upower: update for AEG 2015-12-29 Arnaud Quette <[email protected]> * drivers/powercom.c: Fix the processing of output voltage for KIN units The processing of output voltage requires to also take into account the line voltage, as reported by Patrik Dufresne. This may still need some further adjustments Reference: https://github.com/networkupstools/nut/issues/187 * drivers/powercom.c: Fix the processing of input voltage for KIN units The processing of input voltage requires to also take into account the line voltage, as reported by Patrik Dufresne. Also bump the driver version to 0.16, since 0.15 was already used, but not set Reference: https://github.com/networkupstools/nut/issues/187 * drivers/mge-hid.c: Fix letter case for AEG USB VendorID The letter case of this VendorID may be important for generated files, such as the udev ones (reported by Charles Lepple) 2015-12-28 Arnaud Quette <[email protected]> * data/driver.list.in, drivers/mge-hid.c: HCL: AEG PROTECT B / NAS supported by usbhid-ups Reference: https://github.com/networkupstools/nut/issues/249 2015-12-17 Daniele Pezzini <[email protected]> * data/driver.list.in: HCL: Legrand Keor Multiplug supported by nutdrv_qx Reference: https://github.com/networkupstools/nut/issues/248 2015-12-09 Andrey Jr. Melnikov <[email protected]> * drivers/bcmxcp_usb.c: Don't call usb_close() after reset 2015-12-08 Andrey Jr. Melnikov <[email protected]> * drivers/bcmxcp_usb.c: Call usb_reset() when driver unable to claim device * drivers/bcmxcp.h, drivers/bcmxcp_usb.c: Refactor get_answer() routine, make it properly deal with multi-packets responses. Lower stack usage. 2015-07-27 Daniele Pezzini <[email protected]> * common/common.c, common/str.c, drivers/bcmxcp.c, drivers/blazer.c, drivers/blazer_ser.c, drivers/blazer_usb.c, drivers/libhid.c, drivers/mge-xml.c, drivers/nutdrv_qx.c, drivers/powerp-bin.c, drivers/powerp-txt.c, drivers/powerpanel.c, drivers/tripplitesu.c, drivers/upscode2.c, include/common.h, include/str.h, server/upsd.c, tools/nut-scanner/scan_usb.c: common: consolidate some string- related functions Move *trim*() functions from common to str. Prepend the 'str_' common prefix. Bailout early if string is NULL or empty. In *trim_m() functions, make sure the string containing characters to be removed is not NULL and bailout early if empty. Add new str_trim[_m]() functions to remove both leading and trailing characters at the same time. Update all the tree accordingly; versioning where appropriate. * common/Makefile.am, common/str.c, include/Makefile.am, include/common.h, include/str.h: common: add some string-related functions 2015-11-10 Charles Lepple <[email protected]> * data/driver.list.in: HCL: Electrys UPS 2500 (nutdrv_qx and blazer_ser) Closes https://github.com/networkupstools/nut/issues/241 * data/driver.list.in: HCL: Eaton E Series DX UPS 1-20 kVA uses blazer_ser Closes https://github.com/networkupstools/nut/issues/238 2015-11-09 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: add number of outlets in Eaton ePDU groups * docs/nut-names.txt: Add a variable for the number of outlets in a group Added 'outlet.group.n.count' which provides the number of outlets in the outlet group 'n' 2015-11-06 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx_voltronic-qs.c: nutdrv_qx: update 'voltronic-qs' subdriver Since, for devices supported by 'voltronic-qs' subdriver, in reality: - invalid commands or queries are echoed back, - accepted commands are followed by action without any further reply, update the subdriver interface accordingly. Also: - change slightly the way we publish protocol as ups.firmware.aux, - update F's reply examples and some info_type (ratings; output.frequency) in QX to NUT table to reflect reality, - increase version number. 2015-10-19 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: improve 'T' protocol support in 'voltronic-qs-hex' subdriver Since the last byte of the reply to the QS query (before the trailing CR) of devices that implement the 'T' protocol holds in reality ratings informations (nominal output frequency/voltage and nominal battery voltage) in its bits, change the 'voltronic-qs-hex' subdriver accordingly. Also: - change slightly the way we publish protocol as ups.firmware.aux, - increase version number. * drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: simplify {in,out}put voltage conversion in 'voltronic-qs-hex' In 'voltronic-qs-hex' subdriver, instead of calculating separately the fractional and integer part of input and output voltage, do it at once. Also, increase version number. * drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: improve protocol identification in 'voltronic-qs-hex' Since 'V' protocol, in reality, never happens to use the encoded version of the reply to the QS query, but it always uses the plain version already implemented in 'voltronic-qs' subdriver, remove it from the identification process of 'voltronic-qs-hex' subdriver. Also, remove some non-significant entries from the testing table and increase version number. * drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: harmonize declarations/definitions in 'voltronic-qs-hex' In 'voltronic-qs- hex' subdriver, the scope of support functions is limited to the subdriver as rightly stated in forward declarations, so correct their definitions to reflect that. Also, increase version number. 2015-10-09 Arnaud Quette <[email protected]> * docs/nut-qa.txt: Reference Black Duck OpenHUB in QA documentation Closes networkupstools/nut#192 2015-10-08 Arnaud Quette <[email protected]> * drivers/snmp-ups.c: snmp-ups: also use __func__ for additional traces * drivers/powerware-mib.c: powerware-mib: more comments for RFC device.event Add more comments on the need to RFC device.event for some data that are currently published under ups.alarm * drivers/powerware-mib.c: snmp-ups: improve Eaton 3-phase UPS alarms reporting Eaton 3phase UPS, using the Powerware MIB, can expose many new alarms. Also use the standard driver "X.YY" versioning, and bump subdriver release to "0.85" * drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: fix and improve the ups.alarms mechanism This mechanism allows to walk a subtree (array) of alarms, composed of OID references. The object referenced should not be accessible, but rather when present, this means that the alarm condition is TRUE. Both ups.status and/or ups.alarm values can be provided * drivers/snmp-ups.c: snmp-ups: fix on some snprintf calls Some snprintf calls are using dynamically allocated variables, which doesn't work with sizeof * drivers/snmp-ups.c: snmp-ups: use __func__ in debug messages * drivers/snmp-ups.c: snmp-ups: nut_snmp_get_oid() returns TRUE on success * drivers/snmp-ups.c: snmp-ups: only use snprintf calls instead of sprintf * drivers/eaton-mib.c, drivers/snmp-ups.c: snmp-ups: simplify handling of other alarms outlet, outlet groups and phase alarms are now using a simplified approach that does not require specific lookup structure to adapt alarm messages. This applies to Eaton ePDU G2/G3 2015-09-22 Arnaud Quette <[email protected]> * drivers/snmp-ups.c: snmp-ups: fix a typo error in debug message Unknown is spelled with an ending N (reported by Evgeny "Jim" Klimov, from Eaton) * drivers/snmp-ups.c: snmp-ups: optimize phase number extraction efficiency Since we know that we are processing an alarm for a phase "Lx", don't use strchr, but simply index (reported by Evgeny "Jim" Klimov, from Eaton) * docs/nut-names.txt, drivers/eaton-mib.c: snmp-ups: use dash- separator for out-of-range For the sake of coherence with other status relative to thresholds, "out of range" frequency status now also use dash as separator, instead of space * drivers/eaton-mib.c: Fix a spelling error in comments * drivers/eaton-mib.c: snmp-ups: fix a typo error on Eaton ePDU G2/G3 MIB Critical is really spelled critical, and not cricital, as used in the various status thresholds value-lookup structures (reported by Evgeny "Jim" Klimov, from Eaton) * data/cmdvartab: Mention the unit for ambient humidity information Add an explicit mention that ambient information related to humidity use the "(percent)" unit * data/cmdvartab, docs/nut-names.txt: Mention the unit for input voltage information Add an explicit mention that input information related to voltage use the "Volts (V)" unit * data/cmdvartab: Mention the unit for ambient temperature information Add an explicit mention that ambient information related to temperature use the "degrees C" unit 2015-09-18 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: add outlet group identifier for Eaton ePDU Eaton ePDU can now publish the parent group of each outlet * docs/nut-names.txt: Extend outlet collection namespace with group ID An outlet can now publish the group to which it belongs to * drivers/snmp-ups.c: snmp-ups: complete nut_snmp_get_{str,int} These methods now allow to get the value of an OID returned by the source OID (as for the sysOID). In case of failure (non existent OID), the functions return the last part of the returned OID (ex: 1.2.3 => 3) * drivers/snmp-ups.c: snmp-ups: create a nut_snmp_get_oid() function This method allows to get the value of an OID which is also an OID (as for the sysOID), without trying to get the value of the pointed OID. This will allow to use nut_snmp_get_{int,str}() the get the value of the pointed OID 2015-09-17 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: outlet groups type handling for Eaton ePDU Eaton ePDU can now publish the type of outlet group * docs/nut-names.txt: Extend outlet group collection namespace with type The type of outlet group can now be published, part of the new outlet.group data collection * drivers/eaton-mib.c: snmp-ups: outlet groups commands for Eaton ePDU Eaton ePDU can now handle commands outlet groups, including on, off and reboot (cycle) * drivers/snmp-ups.c: snmp-ups: fix commands handling for outlet groups The su_instcmd() function of snmp-ups is now adapted to support outlet groups * drivers/eaton-mib.c: Advanced outlets groups alarm handling for Eaton ePDU Eaton ePDU can now handle alarms on outlets groups, for voltage and current, relative to the configured thresholds * drivers/snmp-ups.c: snmp-ups: improvements for outlet groups and alarms Improve the code for general template management, including outlets and outlets groups for now, and add alarm management for outlet groups, the same way as for outlets 2015-09-16 Arnaud Quette <[email protected]> * drivers/snmp-ups.c: snmp-ups: fix set variable for outlet groups The setvar() function of snmp-ups is now adapted to support outlet groups * drivers/eaton-mib.c: snmp-ups: outlet groups handling for Eaton ePDU Eaton ePDU can now handle outlet groups, including voltage and current (with thresholds and status relative to the configured thresholds), along with power and realpower. A subsequent commit will address the alarms, settings and commands. Bump subdriver version to 0.30 * drivers/snmp-ups.c: snmp-ups: update debug message The template guestimation function name was changed, but the debug message was left with the old function name 2015-09-15 Arnaud Quette <[email protected]> * docs/nut-names.txt: Extend NUT namespace with outlet.group collection A new data collection, called "outlet.group", is now available. It provides grouped management for a set of outlets. The same principles and data than the outlet collection apply to outlet.group * drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: adapt template mechanisms for outlet groups The template handling mechanisms, originally created for outlets, is now adapted to also manage outlet groups 2015-09-14 root <[email protected]> * docs/nut-names.txt: Add a note on the outlet.count variable 2015-09-14 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: add nominal input current for Eaton ePDU snmp-ups now provides input.[Lx.]current.nominal for Eaton ePDU G2/G3, both for 1phase and 3phase * drivers/eaton-mib.c: snmp-ups: better input.power handling for Eaton ePDUs Improve the way we declare and process input.power, as previously done for input.realpower, in order to address the variations between Eaton ePDUs G2 and G3 2015-09-11 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: publish part number for Eaton ePDU device.part was standardized in NUT namespace, so enable the declaration for Eaton ePDU * drivers/eaton-mib.c: snmp-ups: 3-phase alarm handling for Eaton ePDU Eaton ePDU can now handle alarms on 3-phase, currently limited to voltage and current, relative to the configured thresholds * drivers/snmp-ups.c: snmp-ups: implement 3-phase alarm handling snmp-ups now allows to publish 3-phase alarms in ups.alarm, the same way as with outlet. Declaration of such alarms are done using "Lx.alarm". info_lkp_t structures messages are shared templates with outlets, and use the string formats to include the context (outlet or phase) and the number (of the outlet or phase) in alarm messages. These alarms are then published in "ups.alarm", with the standard mechanism for alarm publication * docs/nut-names.txt: Extend 3-phase collection namespace with alarms 3-phase data collection now allows to specify alarms, the same way than with the outlet collection ("outlet.n.alarm"), but using "Lx.alarm" (for example "L1.alarm"). These alarms are then published in "ups.alarm", with the standard mechanism for alarm publication * drivers/eaton-mib.c: Advanced threshold handling for Eaton 3-phase ePDU Eaton ePDU can now handle warning and critical thresholds settings and status for input voltage and current on 3-phase units. Alarms are however still to be implement * docs/nut-names.txt: Extend 3-phase collection namespace with threshold 3-phase data collection now allows to specify low / high warning and critical thresholds for voltage and current. Status relative to the thresholds also exist for these data 2015-09-07 Arnaud Quette <[email protected]> * drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: fix loss of precision when setting values su_setvar() was losing precision when converting and casting the provided values to send to the SNMP agent. As an example, with an OID in millivolt (multiplier set to 0.001), when providing 238 (V) using upsrw, the value sent to the SNMP agent was 237999, so leaking 0.1 volt 2015-09-04 Arnaud Quette <[email protected]> * drivers/dstate.c: Extend ups.alarm internal buffer to 1024 chars Currently, ups.alarm can hold up to 256 chars to expose alarms. With the recent outlet alarms handling addition, the buffer may quickly be to small. Thus, increase to 1024, which may still not be sufficient but already provides a bit more room * drivers/eaton-mib.c: snmp-ups: outlet alarm handling for Eaton ePDU Eaton ePDU can now handle alarms on outlets, currently limited to outlet voltage and current, relative to the configured thresholds * drivers/snmp-ups.c: snmp-ups: implement outlets / PDU alarm handling snmp-ups now allows to publish outlets and PDU alarms in ups.alarm, the same way as with ups.status. Declaration of such alarms are done using the outlet template mechanism ("outlet.%i.alarm"). info_lkp_t structures messages can also use the string formats to include the outlet number in alarm messages. These alarms are then published in "ups.alarm", with the standard mechanism for alarm publication * docs/nut-names.txt: Extend outlet collection namespace with alarms Outlet data collection now allows to specify alarms, using the template definitions ("outlet.n.alarm"). These alarms are then published in "ups.alarm", with the standard mechanism for alarm publication 2015-09-02 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: outlet threshold handling for Eaton ePDU Eaton ePDU can now handle warning and critical thresholds settings and status for outlet voltage and current * docs/nut-names.txt: Extend outlet collection namespace with threshold Outlet data collection now allows to specify low / high warning and critical thresholds for voltage and current. Status relative to the thresholds also exist for these data 2015-09-01 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: alarms handling for Eaton ePDU Eaton ePDU can now publish alarms, related to input status (voltage, frequency and current) and ambient status (temperature and humidity). Note that alarms are still published under ups.alarms, though these should belong to either pdu.alarms or better device.alarms * drivers/eaton-mib.c: Advanced input threshold handling for Eaton ePDU Eaton ePDU can now handle warning and critical thresholds settings and status for input voltage and current, along with the frequency status * data/cmdvartab, docs/nut-names.txt: Extend input collection namespace with threshold Input data collection now allows to specify low / high warning and critical thresholds for voltage and current. Status relative to the thresholds also exist for these data, and for the frequency 2015-08-31 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: snmp-ups: ambient dry contacts support for Eaton ePDU Eaton ambient modules, connected on ePDU, now publish the status of the connected dry contacts sensors * data/cmdvartab, docs/nut-names.txt: Extend ambient collection namespace with dry contacts Ambient data collection now allow to specify dry contacts sensor status * drivers/eaton-mib.c: snmp-ups: fix Eaton Pulizzi Switched PDU multiplier As per the previous commit, to well handle integer RW variables * drivers/eaton-mib.c: snmp-ups: ambient threshold handling for Eaton ePDU Eaton ePDU can now handle warning and critical thresholds and status for both humidity and temperature * data/cmdvartab, docs/nut-names.txt: Extend ambient collection namespace with threshold Ambient data collection now allow to specify warning and critical thresholds * drivers/eaton-mib.c: snmp-ups: publish presence of Eaton ambient sensor Publish the actual presence of ambient sensor for Eaton ePDU G2 and G3 * data/cmdvartab, docs/nut-names.txt: Publish the actual presence of an ambient sensor A new data was created (ambient.present) to publish the actual presence of an ambient sensor 2015-10-06 Charles Lepple <[email protected]> * data/driver.list.in: HCL: Asium P700, Micropower LCD 1000 and Eaton 5E1100iUSB 2015-10-06 Daniele Pezzini <[email protected]> * data/driver.list.in: HCL: LYONN CTB-800V supported by nutdrv_qx Protocol: 'voltronic-qs-hex' Reference: https://github.com/networkupstools/nut/pull/230 2015-08-22 Mariano <[email protected]> * drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: add support for LYONN CTB-800V Small protocol validation change in 'voltronic-qs- hex' subdriver to add support for the protocol used by the LYONN CTB-800V UPS. 2015-09-28 Arnaud Quette <[email protected]> * docs/new-drivers.txt: Fix spacing error 2015-09-22 Charles Lepple <[email protected]> * drivers/solis.c, drivers/solis.h: solis: remove additional warnings The "Waiting" flag is always zero, and several other variables were not used. * drivers/solis.c, drivers/solis.h: solis: clean up warnings Comment out unused constants, and add 'static' and 'const' wherever possible. 2015-09-20 Charles Lepple <[email protected]> * drivers/Makefile.am, drivers/solis.c: solis: math fixes As mentioned here: https://github.com/networkupstools/nut/pull/235 2015-09-19 bsalvador <[email protected]> * drivers/solis.c, drivers/solis.h: solis: patch for Microsol Back- Ups BZ1200-BR patch for correct reading for Microsol Back-Ups BZ1200-BR (rebased onto solis_debug branch, and cleaned up whitespace. -- CFL) Closes https://github.com/networkupstools/nut/pull/235 and Closes https://github.com/networkupstools/nut/pull/236 2015-09-16 Arnaud Quette <[email protected]> * data/driver.list.in, docs/man/snmp-ups.txt, drivers/powerware- mib.c, drivers/powerware-mib.h, drivers/snmp-ups.c: snmp-ups: add Eaton Power Xpert Gateway UPS Card This newer generation of SNMP card is used for BladeUPS or other UPS, and is serving the same XUPS MIB, as in the "pw" subdriver * scripts/subdriver/gen-snmp-subdriver.sh: Update SNMP subdriver generation script Complete the documentation, by adding some notes and examples ; Fix the MIBs directories list and the "keep temporary files" option 2015-09-11 Arnaud Quette <[email protected]> * drivers/snmp-ups.c: Improve log/debug output trace 2015-09-08 Charles Lepple <[email protected]> * drivers/solis.c: solis: resync with end-of-packet character (0.64) Suggested by @rpvelloso in https://github.com/networkupstools/nut/i ssues/231#issuecomment-134795747 Note that the driver could possibly get out-of-sync after initial detection. 2015-09-07 Charles Lepple <[email protected]> * docs/man/macosx-ups.txt, drivers/macosx-ups.c: macosx-ups: gracefully handle disconnection of UPS Tested on 10.9.5 and 10.10.5. Returns "data stale" when UPS disappears. 2015-09-07 Arnaud Quette <[email protected]> * drivers/powerware-mib.c: Bump Powerware SNMP subdriver version 2015-09-04 Charles Lepple <[email protected]> * Makefile.am, docs/configure.txt, docs/new-clients.txt, tools/nut- scanner/README: doc: correct remaining `--with-lib` references Credit: Paul Vermeer 2015-09-01 Arnaud Quette <[email protected]> * drivers/snmp-ups.h: Minor updates to TODO comments * drivers/snmp-ups.c: Implement ups.alarm for SNMP snmp-ups now allows to publish alarms in ups.alarm, the same way as with ups.status 2015-08-31 Arnaud Quette <[email protected]> * drivers/snmp-ups.c: Proper handling of integer RW variables RW variables were previously supposed to always be strings. Thus, the multiplier (using the info_len field) was not applied. Also allow setting float values, not only integer * drivers/snmp-ups.c, drivers/snmp-ups.h: Fix default SNMP retries and timeout The previous patch was using the default values from Net-SNMP, which are set to -1. When the user was not providing overriden values, this was causing the driver to not be able to establish the communication with the device. The default values are now fixed, as per documented (i.e. 5 retries and timeout of 1 second). Also bump the driver version to 0.74 * docs/man/ups.conf.txt, drivers/dstate.c: Make more obvious the socket write failure Document the error that require the use of the 'synchronous' flag. Also use debug level 1 instead of 2 for the debug message 2015-08-23 Charles Lepple <[email protected]> * drivers/solis.c: solis: Add upsdebug*() and upslogx() calls for diagnostics 2015-08-18 Kenny Root <[email protected]> * drivers/powerware-mib.c: Add ups.start.auto for Powerware SNMP Use the IETF UPS MIB to indicate to Powerware devices that it should restart when mains power is applied. * drivers/powerware-mib.c: Fix some indentation problems in PowerWare SNMP * drivers/powerware-mib.c: Add shutdown.return for Powerware SNMP The Powerware MIB supports the concept of shutting down with a delay and then returning when line power is restored. The delay is set to 0 seconds currently. * drivers/powerware-mib.c: Add load.{off,on}.delay for Powerware SNMP The commands to shut down with delay have existed since the first version of the Powerware MIB so add the newer commands "load.off.delay" and "load.on.delay" to aid in shutdown scripts. 2015-08-07 Arnaud Quette <[email protected]> * drivers/dummy-ups.c, drivers/dummy-ups.h: Fix dummy-ups for external value changes dummy-ups allow to change the values of the publicated variables through the standard upsrw tool. This method is handy to script value changes, in a controlled way, compared to the dynamic version (using the TIMER keyword in .dev files), which changes the values in a non controlled way. Bump driver version to 0.14 * m4/nut_check_libnss.m4: Fully check for a working Mozilla NSS Rework the NSS tests so that just having runtime libraries installed is not enough. Moreover, since GNU libc6 also provides a nss.h header, the test now checks for both nss.h and ssl.h Closes networkupstools/nut#184 * docs/download.txt: Fix Red Hat / Fedora packages repository URL 2015-08-03 Tomas Halman <[email protected]> * clients/nutclient.cpp: Problem: nutclient library sometimes reads socket closed by server. Solution: proper read return value evaluation 2015-08-04 Arnaud Quette <[email protected]> * tools/nut-scanner/scan_snmp.c: Fix a crash on a 2nd call to libnutscan on behalf of Tomas Halman, from Eaton Opensource Team 2015-07-24 Nash Kaminski <[email protected]> * drivers/tripplitesu.c: tripplitesu: Fix initialization when tripplite firmware is buggy With some Tripplite SU1000RT2U (and possibly more) UPS's, a firmware bug causes a malformed response to the very first command that is sent after the serial port is opened following a warm or cold boot of the system. My theory is that this related to either the RS232 data lines or handshaking lines being pulled high once the server's UART is powered however I have not determined precisely if this is related to the data line being pulled high or the handshaking lines being asserted. However, I have been able to consistently reproduce the issue where the driver fails to start on the first attempt after a cold/warm boot across 3 different machines and 2 SU1000RT2U UPS's. To workaround this, the initial enumeration is repeated a 2nd time after 300ms(to allow all garbage data to arrive) if the first attempt fails, which allows the driver to consistently startup successfully on the 1st attempt. Closes networkupstools/nut#220 2015-07-24 Tim Smith <[email protected]> * INSTALL.nut: Spelling fixes Spelling fixes and capitalization of SUSE 2015-07-23 Arnaud Quette <[email protected]> * scripts/augeas/nutupsconf.aug.tpl: Update Augeas lens for ups.conf Add the various missing global directives and ups fields 2015-07-20 Daniele Pezzini <[email protected]> * data/driver.list.in: HCL: fix case and spacing 2015-07-18 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx.c: nutdrv_qx: when targeting 'UPS No Ack' consider also the trailing CR In 'fabula' and 'krauler' USB subdrivers, take into account also the trailing CR in the reply while looking for a 'UPS No Ack'. * drivers/nutdrv_qx.c: nutdrv_qx: stay true to return code in 'fabula' USB subdriver In 'fabula' USB subdriver, when reading 'UPS No Ack' from device, since we already mimic a timeout, also empty the reply. 2015-07-11 Charles Lepple <[email protected]> * data/driver.list.in: HCL: Fideltronic INIGO Viper 1200 supported by nutdrv_qx 2015-07-02 Charles Lepple <[email protected]> * drivers/usbhid-ups.c: usbhid-ups: bump version to 0.41 Both the eaton_dual_reportdesc and usbhid_ups_input_vs_feature branches claimed version 0.40, so let's disambiguate the merged version. 2015-07-02 Arnaud Quette <[email protected]> * drivers/libhid.c: Add a debug trace for the number of HID objects found * drivers/hidtypes.h: Fix testing typo MAX_REPORT is really 500 (HID objects), not 50! * drivers/hidparser.c: Report when there are further unprocessed HID objects Following the last commits, and especially the MAX_REPORT one, warn whenever there are remaining HID objects that were not processed. This may serve * drivers/hidtypes.h: Increase the maximum number of HID objects The previous value (300) was causing a trim of the remaining objects. Increase the value to 500, which should give a bit of time * drivers/libshut.c, drivers/libshut.h, drivers/libusb.c, drivers /usb-common.h, drivers/usbhid-ups.c: Add support for Eaton dual HID report descriptor All devices use HID descriptor at index 0. However, some newer Eaton units have a light HID descriptor at index 0, and the full version is at index 1 (in which case, bcdDevice == 0x0202). This dual report descriptor approach is due to the fact that the main report descriptor is now too heavy, and cause some BIOS to hang. A light version is thus provided at the default index, solving this BIOS issues 2015-06-27 Charles Lepple <[email protected]> * drivers/macosx-ups.c: macosx-ups: fix for 10.10 (Yosemite); v1.1 In OS X 10.9 and earlier, IOPSGetPowerSourcesInfo() returned a CFDictionary. In 10.10 it returns a CFArray. Programmers are supposed to use IOPSGetPowerSourceDescription() to gloss over this distinction. However, this does not make it easy to distinguish between a laptop battery and an UPS. So the "port" driver option no longer has any effect. https://developer.apple.com/library/mac/doc umentation/IOKit/Reference/IOPowerSources_header_reference/#//apple _ref/c/func/IOPSGetPowerSourceDescription 2015-06-22 Arnaud Quette <[email protected]> * scripts/upower/95-upower-hid.rules, tools/nut-usbinfo.pl: Update UPower HID rules and generator 2015-06-11 Charles Lepple <[email protected]> * drivers/usbhid-ups.c: usbhid-ups.c: fall back to HID Input type if not a Feature 2015-06-07 Charles Lepple <[email protected]> * drivers/tripplite-hid.c: tripplite-hid.c: device.part is static (version 0.82) 2015-06-04 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx.c: nutdrv_qx: make sure processed item's boundaries are not wrong 2015-04-26 Nick Mayerhofer <[email protected]> * docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: nutdrv_qx: improve documentation for some methods 2015-06-04 Daniele Pezzini <[email protected]> * docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: nutdrv_qx: remove redundant comments and update docs 2015-04-28 Nick Mayerhofer <[email protected]> * drivers/nutdrv_qx_voltronic.c: nutdrv_qx: move var declaration in 'voltronic' subdriver Move variable declaration to fulfill condition '3.3. Portability' of the developer guide. Bump version. * drivers/libhid.c: libhid: replace "flush loop" with memset Move to the C way of setting memory (memset), replacing a for loop with a few anti-patterns in it: - for (...; ; i++) - for (...; i < MAGIC_NUMBER; ...) - for (...) array[i] = 0 2015-05-18 Daniele Pezzini <[email protected]> * docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c, drivers/nutdrv_qx.h, drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c, drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c, drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic.c, drivers/nutdrv_qx_zinto.c: nutdrv_qx: give subdrivers a last chance to process the command Add (and document) a new function ('preprocess_command()') to preprocess the command to be sent to the device, just before the actual sending and, in case of instant commands/setvars, after the 'preprocess()' function has been triggered (if appropriate). As an example, this function can be useful to add to all commands (both queries and instant commands/setvars) a CRC or to fill the command of a query with some data. Also, in qx_process(), address buf size vs item->answer size earlier. Update all subdrivers accordingly, bump versions. 2015-06-01 Arnaud Quette <[email protected]> * docs/man/snmp-ups.txt, drivers/snmp-ups.c, drivers/snmp-ups.h: Provide access to Net-SNMP timeout and retries Two new extra arguments are now available to allow overriding Net-SNMP number of retries (snmp_retries) and timeout per retry (snmp_timeout). These respectively maps to snmpcmd "-r retries" and "-t timeout" 2015-05-29 Arnaud Quette <[email protected]> * scripts/upower/95-upower-hid.rules: Update UPower HID rules * tools/nut-usbinfo.pl: Fix UPower device matching for recent kernels As per the UPower patch below referenced, hiddev* devices now have class "usbmisc", rather than "usb". See http://cgit.freedesktop.org/upower/commit/rules/95-upower- hid.rules?id=9f31068707fc79744961cea7258b0eb262effbf1 2015-05-28 Arnaud Quette <[email protected]> * tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan- device.h, tools/nut-scanner/nutscan-display.c, tools/nut-scanner /nutscan-init.c, tools/nut-scanner/nutscan-init.h, tools/nut- scanner/nutscan-ip.c, tools/nut-scanner/nutscan-ip.h, tools/nut- scanner/nutscan-serial.c, tools/nut-scanner/nutscan-serial.h, tools /nut-scanner/scan_avahi.c, tools/nut-scanner/scan_eaton_serial.c, tools/nut-scanner/scan_ipmi.c, tools/nut-scanner/scan_nut.c, tools /nut-scanner/scan_snmp.c, tools/nut-scanner/scan_usb.c, tools/nut- scanner/scan_xml_http.c: Fix legal information on source-code headers Copyright and author were not mentioned as it should be. Most of the nut-scanner copyright belongs to EATON, apart from few parts. Files descriptions are now also in Doxygen format 2015-05-18 Daniele Pezzini <[email protected]> * docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c, drivers/nutdrv_qx.h, drivers/nutdrv_qx_bestups.c, drivers /nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-common.h, drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c, drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c, drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic.c, drivers/nutdrv_qx_zinto.c: nutdrv_qx: make preprocessed value's size_t a const There's no need to intervene on the passed-to-the- function value of a preprocessed value's size_t, so clarify it is a const. Update all subdrivers accordingly, bump versions. * drivers/nutdrv_qx.c: nutdrv_qx: make sure an answer is not reused if preprocess_answer() fails If an item's preprocess_answer() function fails, the answer should not be considered valid and inherited by the following items with the same command. Therefore, on failure, clear the answer so that the following items are forced to query the device and preprocess the answer anew, if appropriate. 2015-05-13 Arnaud Quette <[email protected]> * docs/download.txt: Update NUT packages for Windows to 2.6.5-6 2015-05-07 Arnaud Quette <[email protected]> * scripts/systemd/nut-server.service.in: Restore systemd relationship with nut-driver service The Requires directive from nut-server to nut-driver was previously removed, since it was preventing upsd from starting whenever one or more drivers, among several, was failing to start. Use the Wants directive, a weaker version of Requires, which will start upsd even if the nut-driver unit fails to start. closes https://github.com/networkupstools/nut/issues/200 2015-04-23 Arnaud Quette <[email protected]> * Makefile.am: Cleanup GPG signature before generation 2015-04-22 Arnaud Quette <[email protected]> * configure.ac: bump version back to 2.7.3.1 * configure.ac: Restore version 2.7.3 for release * docs/security.txt: Missing link reference update The filename of the previous GPG release key was not updated, leading to pointing to the current release key 2015-04-08 Nick Mayerhofer <[email protected]> * docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: nutdrv_qx: clarify docs/inline comments 2015-04-16 Arnaud Quette <[email protected]> * configure.ac: bump version to 2.7.3.1 2015-04-15 Arnaud Quette <[email protected]> * configure.ac: update version to 2.7.3 * docs/security.txt: Update release signature verification The release manager key has change. Update the documentation to reflect it, along with keeping necessary for checking the previous releases * docs/download.txt: Fix formatting issue * NEWS, UPGRADING: Final update for release 2.7.3 Complete the release information for NUT 2.7.3 * docs/maintainer-guide.txt: Store some comments for latter processing 2015-04-10 Arnaud Quette <[email protected]> * drivers/mge-hid.c: Improve Eaton ABM support for USB/HID units As per clarifications from David G. Miller (Eaton ABM expert) and customers request, when ABM is enabled, we now both publish the following as per the ABM information: - the 5 status bits {charging, discharging, floating, resting, off} under battery.charger.status - the 2 historical status bits {CHRG, DISCHRG} under ups.status When ABM is disabled, we just publish the 2 historical status bits {CHRG, DISCHRG} under ups.status, as per UPS.PowerSummary.PresentStatus.{Charging,Discharging}, as done previously 2015-04-02 Arnaud Quette <[email protected]> * conf/ups.conf.sample, docs/man/ups.conf.txt, drivers/dstate.c, drivers/dstate.h, drivers/main.c: Improve synchronous driver flag implementation The previous commit was suffering a number of issues. The present commit fixes these, along with adding more documentation and a better and more understandable implementation code. Thanks to Daniele Pezzini for the thorough review Closes: https://github.com/networkupstools/nut/issues/197 2015-04-01 Arnaud Quette <[email protected]> * docs/man/ups.conf.txt, drivers/dstate.c, drivers/dstate.h, drivers/main.c: Implement synchronous driver flag As per issue #197, NUT drivers work by default in asynchronous mode. This means that all data are pushed by the driver on the communication socket to upsd (Unix socket on Unix, Named pipe on Windows) without waiting for these data to be actually consumed. With some HW, such as ePDUs, that can produce a lot of data, asynchronous mode may cause some congestion, resulting in the socket to be full, and the driver to appear as not connected. By enabling the 'synchronous' flag, the driver will wait for data to be consumed by upsd, prior to publishing more. This can be enabled either globally or per driver. 2015-04-07 Arnaud Quette <[email protected]> * scripts/systemd/nut-server.service.in: Do not Require systemd nut- driver for nut-server Put the Requires=nut-driver.service in comment for nut-server systemd unit file. Thus we don't require drivers to be successfully started! This was a change of behavior compared to init SysV, and could prevent from accessing successfully started drivers, or at least to audit a system Closes: https://github.com/networkupstools/nut/issues/200 2015-04-04 Charles Lepple <[email protected]> * UPGRADING: UPGRADING: mention SSL permissions (#199) * docs/security.txt: NSS SSL documentation Addresses new behavior as part of the NSS forking fix (#199). Formatting and wording fixed as well. 2015-04-04 Émilien Kia <[email protected]> * server/upsd.c: Initialize SSL after deamonize and downgrade to user. Fix issue #190 - upsd: NSS SSL only working in debug mode https://github.com/networkupstools/nut/issues/190 2015-04-02 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: Better input.realpower handling for Eaton ePDUs G2/G3 Improve the way we declare and process input.realpower, in order to address the variations between Eaton ePDUs G2 and G3 2015-03-19 Arnaud Quette <[email protected]> * docs/nut-names.txt: Document new variables and commands addition The variables and commands that were added were not described in the NUT namespace document. These are: input.transfer.delay - battery.energysave.load - battery.energysave.delay - battery.charger.status - outlet.1.shutdown.return - outlet.2.shutdown.return * drivers/bcmxcp.c: Fix the letter case of ABM and outlets status For more coherence with NUT status publication, these status are now lower case * drivers/bcmxcp.c: Add missing Author 2014-10-10 gavrilov-i <[email protected]> * data/cmdvartab, drivers/bcmxcp.c, drivers/bcmxcp.h: drivers/bcmxcp: advanced features Closes: #158 Added setvar function exec result parsing Add command to turn load on after shutdown.stayoff and shutdown.return. Outlet control changed. Outlet control via commands "outlet.n.load.on/off" like in other drivers. Variable outlet.n.staus now only for reading. Some code changes in outlet.n.shutdown.return command - now supporting more than 3 outlets (up to 9). Add descriptions to new and some old variables and commands. Add "bypass.start" command, for enabling bypass. For returning in On-Line mode exec "load.on" command. Additional checks of UPS vars. Now add zero var only if it could be changed. 2015-04-01 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: Workaround input.{power,realpower} for Eaton ePDUs Add variable declarations to handle missing input.{power,realpower} on Eaton ePDUs G2 and G3 1phase. On 3phase, these variables point at SNMP OIDs that sum up the 3 phases information. These OIDs should also be present on 1phase, however it's actually not the case. So simply duplicate the L1 declaration 2015-03-31 Arnaud Quette <[email protected]> * drivers/powerware-mib.c: Implement battery.charger.status for Eaton SNMP This new official variable now replaces the historic 'vendor.specific.abmstatus', as per other similar implementations (in usbhid-ups and bcmxcp drivers) 2015-03-27 Arnaud Quette <[email protected]> * drivers/mge-hid.c: Implement Eaton ABM support for USB/HID units Add support for Eaton Advanced Battery Monitoring, for USB/HID units. Information are provided through the new battery.charger.status. For now, at least, when ABM is enabled, the historic CHRG and DISCHRG flags are not published anymore in ups.status 2015-03-26 Stuart Henderson <[email protected]> * data/driver.list.in, docs/man/snmp-ups.txt, docs/snmp- subdrivers.txt, drivers/Makefile.am, drivers/huawei-mib.c, drivers /huawei-mib.h, drivers/snmp-ups.c: snmp-ups: new subdriver for Huawei "Hi, the [commit] below adds a new subdriver for snmp-ups to support Huawei UPS, based on an observed walk from a UPS5000-E with a few bits filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/)." http://news.gmane.org/find- root.php?message_id=slrnmh6npf.tg7.stu%40naiad.spacehopper.org 2015-03-25 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx_voltronic.c: nutdrv_qx: add support in 'voltronic' subdriver for P13 protocol 2015-03-24 Arnaud Quette <[email protected]> * drivers/mge-hid.c: Complementary Energy Saving data for Eaton USB devices Add a 2nd HID path for battery.energysave.delay. Depending on the exact device model, different implementations may be used 2015-03-22 Daniele Pezzini <[email protected]> * NEWS: nutdrv_qx: update NEWS about new 'fuji' USB subdriver 2015-03-21 Daniele Pezzini <[email protected]> * drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: nutdrv_qx: typedef testing_t only if TESTING is #defined First reported by GitHub user @nickma82 * docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx: document 'voltronic-qs-hex' subdriver in man pages * docs/man/nutdrv_qx.txt, drivers/nutdrv_qx_bestups.c, drivers /nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-common.h, drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c, drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c, drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_zinto.c: nutdrv_qx: add 'ignoresab' flag to support bogus devices Some UPSes incorrectly report the 'Shutdown Active' bit (7th bit of the 'status byte') as always on (=1), consequently making the driver believe the UPS is nearing a shutdown (and, as a result, ups.status always contains FSD). To workaround this issue, add a new 'ignoresab' flag that makes the driver do just what its name tells (IGNORE Status Active Bit) skipping the relative item in qx2nut tables. References: - http://lists.alioth.debian.org/pipermail /nut-upsdev/2015-March/006896.html - https://github.com/networkupstools/nut/issues/195 2015-03-11 Arnaud Quette <[email protected]> * data/cmdvartab, docs/nut-names.txt: Add some new variable names, related to ePDUs Add new variables names, related to ePDUs, such as input.*.load, input.*.realpower and input.*.power * drivers/eaton-mib.c: Minor update to comments 2015-02-04 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: Fix outlet.{power,realpower} data mapping According to the new mapping using the input collection, these two data mapping were targeting at the wrong OIDs. 2015-02-03 Arnaud Quette <[email protected]> * drivers/eaton-mib.c: Fix and complete a bit Eaton ePDUs support Add some new data mapping to improve support for Eaton ePDUs. This commit includes some new NUT data names that requires approval before being merged 2015-03-19 Arnaud Quette <[email protected]> * data/cmdvartab, docs/nut-names.txt, drivers/mge-hid.c: Add more Energy Saving features for Eaton USB devices Add two new Energy Saving features: - battery.energysave.delay: to configure the delay before switching off the UPS if running on battery and load level low (in minutes) - battery.energysave.realpower: to switch off the UPS if running on battery and power consumption on UPS output is lower than this value (expressed in Watts). Note that documentation in nut-names.txt and cmdvartab was limited to difference with an upcoming branch merge, that will add the others * drivers/mge-hid.c: Align Energy Saving variable names Change ups.load.energysave to battery.energysave.load, to be coherent with the latest commit made in the bcmxcp driver 2015-03-10 Arnaud Quette <[email protected]> * data/cmdvartab, drivers/mge-hid.c: Add a new EnergySaving threshold for Eaton UPSs Add 'ups.load.energysave' parameter, to enable energy saving when the power consumption on the UPS output drops below this value (in percent). This new variable however requires to go through the NUT RFC process to get approved 2015-03-19 Arnaud Quette <[email protected]> * tools/Makefile.am: Also distribute nut-ddl-dump.sh helper script 2015-03-18 Daniele Pezzini <[email protected]> * data/driver.list.in: HCL: EUROCASE EA200N 2000VA supported by nutdrv_qx Protocol: 'megatec' USB subdriver: 'fuji' Reference: ht tp://thread.gmane.org/gmane.comp.monitoring.nut.user/8808/focus=908 1 * drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c, drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c, drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_zinto.c: nutdrv_qx: remove redundancy in blazer-common-dependent subdrivers Since main nutdrv_qx driver already sets an alarm when FSD arises (see nutdrv_qx.c>ups_alarm_set()), there is no need to do so in the various subdrivers. So, in order to prevent a duplicated alarm message, remove all unneeded code from the affected subdrivers (all the ones that depend on nutdrv_qx_blazer-common). 2015-03-17 Daniele Pezzini <[email protected]> * data/driver.list.in: HCL: update Mecer ME-1000-WTU (supported by nutdrv_qx) Tested by @sliverc (Oliver Sauder) on NUT 2.7.1 Reference: https://github.com/networkupstools/nut/issues/148 2015-03-16 Daniele Pezzini <[email protected]> * docs/man/nutdrv_qx.txt: nutdrv_qx: document USB subdrivers' glitches * drivers/nutdrv_qx.c: nutdrv_qx: add workaround in 'fuji' subdriver to support all shutdown.returns As 'fuji' subdriver discards all the commands of more than 3 characters, in order to support 'SnRm' shutdown.returns (and hence the standard 'S.5R0003' shutdown.return with DEFAULT_{ON,OFF}DELAYs) map 'SnRm' shutdown.returns to the corresponding '…
|
For historic reference: work done in #2431 (several PRs, primarily #2504 and later chiseling to perfection) should probably make the patches applied (back then for NUT v2.7.x at least) by Fedora recipes not needed, with a sturdier solution to be offered out of the box with NUT v2.8.3 and later. CC @opoplawski |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I've just compiled the latest nut v2.7.3 without any issues. As I tried to use the nut-scanner tool, the following messages were shown on the screen:
The libraries are definitely available on my system, therefore I used strace to identify the root cause of the problem. I found out that the program tries to load
libusb.soandlibneon.so, which are usually part of the development files and not available by default.As I searched for a solution of the problem I found out that this problem has already been addresses for the Fedora project files three years ago, but it seems that the changes has not been implemented in the nut base package:
[nut] do not depend on devel files (#838139)
https://lists.fedoraproject.org/archives/list/scm-commits%40lists.fedoraproject.org/message/KVXANOQPK6G7JMBPDT34XVRJWI7IBKOF/
The text was updated successfully, but these errors were encountered: