Stun server issue on clean install #1986

Schutten · 2023-02-14T10:32:24Z

Schutten
Feb 14, 2023

On a clean install of ubuntu server I did a clean install of Nextcloud AIO. In the log I see that a stun server with address of 127.0.0.1 is set. However the local ip of the install is 192.168.2.152. All ports needed are forwarded to this local ip as well. The settings in Nextcloud are setting correctly.
Sending messages by Talk is possible, however no video and audio.
What would be a solution for this?
I have attached the log….
Kopie van Log.docx

Regards,
Dennis

Answered by szaimen

Feb 26, 2023

Hi, we made a few improvements to the talk container with the v4.5.0 release. Testing and feedback is welcome! See https://github.com/nextcloud/all-in-one#how-to-switch-the-channel.

Btw, which browser were you using?

View full answer

szaimen · 2023-02-14T10:34:48Z

szaimen
Feb 14, 2023
Maintainer

Hi, did you open port 3478 in your firewall/router?

1 reply

Schutten Feb 14, 2023
Author

Yes I did….server Ip is 192.168.2.152.please see screenshot as well

szaimen · 2023-02-14T10:41:03Z

szaimen
Feb 14, 2023
Maintainer

All right! Can you follow #1358?

4 replies

Schutten Feb 14, 2023
Author

Yes I did for Talk….
Please see the screenshot….

szaimen Feb 14, 2023
Maintainer

It looks like yiu are now in the container shell. Please run the curl command again as it did not run yet

Schutten Feb 14, 2023
Author

Sorry yes…here is the output screenshot…

szaimen Feb 14, 2023
Maintainer

Looks good. Can you post the output of

sudo docker exec -it --user www-data nextcloud-aio-nextcloud php occ config:list spreed

Schutten · 2023-02-14T11:40:37Z

Schutten
Feb 14, 2023
Author

Here it is….

3 replies

Schutten Feb 14, 2023
Author

szaimen Feb 14, 2023
Maintainer

Ah I see. What is the configured stun sever in the talk admin settings? Can you maybe post a screenshot?

Schutten Feb 14, 2023
Author

Yes I can please see attached…

szaimen · 2023-02-14T12:37:09Z

szaimen
Feb 14, 2023
Maintainer

Hm... The turn server does not seem to work as you can see.

3 replies

szaimen Feb 14, 2023
Maintainer

Currently no idea why because port-forwarding seems to be correctly configured.

Schutten Feb 14, 2023
Author

It can not connect I see indeed…there is a turnserver in the aio install right?

szaimen Feb 14, 2023
Maintainer

Yes, a turnserver is inclluded that uses port 3478 udp and tcp.

Schutten · 2023-02-14T13:03:27Z

Schutten
Feb 14, 2023
Author

As mentioned I did a clean install of both AIO and ubuntu. Previous install was a snap install of Nextcloud with a self configured coturn. This was working ok. However I would like to use the AIO because its really much faster and I was hoping easier to maintain

3 replies

Schutten Feb 14, 2023
Author

Any other suggestions?

szaimen Apr 18, 2023
Maintainer

is it possible that you were connected to a VPN while testing the turn server?

szaimen Apr 18, 2023
Maintainer

Also have you been using Cloudflare Proxy for your domain?

szaimen · 2023-02-14T21:36:49Z

szaimen
Feb 14, 2023
Maintainer

Sorry, no other idea currently what could be wrong. It works on my test instance without any problem.

For the moment as workaround you could install your own turnserver additionally and add it to the turn server config in the talk admin settings.

0 replies

szaimen · 2023-02-26T18:46:44Z

szaimen
Feb 26, 2023
Maintainer

Hi, we made a few improvements to the talk container with the v4.5.0 release. Testing and feedback is welcome! See https://github.com/nextcloud/all-in-one#how-to-switch-the-channel.

Btw, which browser were you using?

2 replies

TommasoCostanzo Mar 5, 2023

Hi, I have recently updated to v4.5.0, and I noticed something strange. In general talk is working fine except the video from the android app. Basically the phone sends the video but cannot receive it, but if I use a pc with Firefox I see the phone video but on the phone I cannot see the video sent from Firefox. However, if I remove the "High-performance backend" everything works as it should. I have the high performance backend configured as: https://my-domain/standalone-signaling/, validate SSL is checked and I get the message that is running OK.
My output of the curl command is the same as "Schutten"
And here is the spreed section:
{
"apps": {
"spreed": {
"types": "dav,prevent_group_restriction",
"project_access_invalidated": "1",
"has_reference_id": "yes",
"signaling_token_privkey_es256": "REMOVED SENSITIVE VALUE",
"signaling_token_pubkey_es256": "REMOVED SENSITIVE VALUE",
"stun_servers": "REMOVED SENSITIVE VALUE",
"installed_version": "15.0.4",
"turn_servers": "REMOVED SENSITIVE VALUE",
"signaling_servers": "REMOVED SENSITIVE VALUE",
"enabled": "yes"
}
}
}

szaimen Mar 15, 2023
Maintainer

Hi, that sounds like nextcloud/talk-android#2704

TommasoCostanzo · 2023-03-15T09:44:42Z

TommasoCostanzo
Mar 15, 2023

Hi, I have recently updated to v4.5.0, and I noticed something strange. In general talk is working fine except the video from the android app. Basically the phone sends the video but cannot receive it, but if I use a pc with Firefox I see the phone video but on the phone I cannot see the video sent from Firefox. However, if I remove the "High-performance backend" everything works as it should. I have the high performance backend configured as: https://my-domain/standalone-signaling/, validate SSL is checked and I get the message that is running OK.
My output of the curl command is the same as "Schutten"
And here is the spreed section:
{
"apps": {
"spreed": {
"types": "dav,prevent_group_restriction",
"project_access_invalidated": "1",
"has_reference_id": "yes",
"signaling_token_privkey_es256": "REMOVED SENSITIVE VALUE",
"signaling_token_pubkey_es256": "REMOVED SENSITIVE VALUE",
"stun_servers": "REMOVED SENSITIVE VALUE",
"installed_version": "15.0.4",
"turn_servers": "REMOVED SENSITIVE VALUE",
"signaling_servers": "REMOVED SENSITIVE VALUE",
"enabled": "yes"
}
}
}

2 replies

szaimen Mar 15, 2023
Maintainer

Hi, that sounds like nextcloud/talk-android#2704

TommasoCostanzo Mar 15, 2023

Thank you Simon. I tested their apk and the issue persists. Anyway, if it is an android app related issue and not server side issue, I will just wait for a new working release of the talk android app. In the meantime I think I can use it without HPB.

fulldecent · 2025-01-13T17:06:19Z

fulldecent
Jan 13, 2025

I tried a clean install on AIO v9 and upgraded to v10. The ports are open, confirmed with NMAP from outside that network and still:

Failed to establish signaling connection. Retrying …

So we have aborted NextCloud install until this is fixed. We'll just wait until 11 comes out. We are not interested in doing anything other than the official AIO installer. But if we are happy to share logs here if it can help fix it.

3 replies

fulldecent Jan 13, 2025

Here are the logs we found:

root@localhost:~# docker logs nextcloud-aio-talk
++ hostname -i
++ grep -oP '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+'
++ head -1
+ IPv4_ADDRESS_TALK_RELAY=172.18.0.3
++ dig nextcloud-aio-talk IN A +short +search
++ grep '^[0-9.]\+$'
++ sort
++ head -n1
+ IPv4_ADDRESS_TALK=172.18.0.3
++ dig nextcloud-aio-talk AAAA +short +search
++ grep '^[0-9a-f:]\+$'
++ sort
++ head -n1
+ IPv6_ADDRESS_TALK=
+ set +x
[34] 2025/01/13 04:01:50.643951 [INF] Starting nats-server
[34] 2025/01/13 04:01:50.646337 [INF]   Version:  2.10.24
[34] 2025/01/13 04:01:50.646346 [INF]   Git:      [1d6f7ea]
[34] 2025/01/13 04:01:50.646348 [INF]   Name:     NAZ7D7J3HGJVTF6QN3HP4GAXOZUI37C5M3NLDGEXC5O2I2ASNVU2ZR24
[34] 2025/01/13 04:01:50.646350 [INF]   ID:       NAZ7D7J3HGJVTF6QN3HP4GAXOZUI37C5M3NLDGEXC5O2I2ASNVU2ZR24
[34] 2025/01/13 04:01:50.646396 [INF] Using configuration file: /etc/nats.conf
[34] 2025/01/13 04:01:50.646852 [INF] Listening for client connections on 127.0.0.1:4222
[34] 2025/01/13 04:01:50.646865 [INF] Server is ready
Janus version: 1300 (1.3.0)
Janus commit: dfd86e34112f512b3a15ba6b7b52a3aa01ea347a
Compiled on:  Fri Dec 20 11:24:07 UTC 2024

Logger plugins folder: /usr/local/lib/janus/loggers
---------------------------------------------------
  Starting Meetecho Janus (WebRTC Server) v1.3.0
---------------------------------------------------

Checking command line arguments...
Debug/log level is 3
Debug/log timestamps are disabled
Debug/log colors are disabled
[WARN] Janus is deployed on a private address (172.18.0.3) but you didn't specify any STUN server! Expect trouble if this is supposed to work over the internet and not just in a LAN...
main.go:162: Starting up version 2.0.1~docker/go1.23.2 as pid 38
main.go:171: Using a maximum of 1 CPUs
natsclient.go:104: Connection established to nats://127.0.0.1:4222 (NAZ7D7J3HGJVTF6QN3HP4GAXOZUI37C5M3NLDGEXC5O2I2ASNVU2ZR24)
grpc_common.go:176: WARNING: No GRPC server certificate and/or key configured, running unencrypted
grpc_common.go:178: WARNING: No GRPC CA configured, expecting unencrypted connections
backend_storage_static.go:73: Backend backend-1 added for https://REDACTED_INSTALLED_PUBLIC_HOSTNAME/
hub.go:221: Using a maximum of 8 concurrent backend connections per host
hub.go:228: Using a timeout of 10s for backend connections
hub.go:261: No trusted proxies configured, only allowing for [127.0.0.0/8, 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16]
hub.go:303: Not using GeoIP database
main.go:268: Could not initialize janus MCU (dial tcp 127.0.0.1:8188: connect: connection refused) will retry in 1s
[WARN] libcurl not available, Streaming plugin will not have RTSP support
[WARN] libogg not available, Streaming plugin will not have file-based Opus streaming
Exec: /opt/eturnal/erts-15.1.2/bin/erlexec -noinput +Bd -boot /opt/eturnal/releases/1.12.1/start -mode embedded -boot_var SYSTEM_LIB_DIR /opt/eturnal/lib -config /opt/eturnal/releases/1.12.1/sys.config -args_file /opt/eturnal/releases/1.12.1/vm.args -erl_epmd_port 3470 -start_epmd false -- foreground
Root: /opt/eturnal
/opt/eturnal
[WARN] No Unix Sockets server started, giving up...
[WARN] The 'janus.transport.pfunix' plugin could not be initialized
mcu_janus.go:307: Connected to Janus WebRTC Server 1.3.0 by Meetecho s.r.l.
mcu_janus.go:315: Found JANUS VideoRoom plugin 0.0.10 by Meetecho s.r.l.
mcu_janus.go:320: Data channels are supported
mcu_janus.go:324: Full-Trickle is enabled
mcu_janus.go:326: Maximum bandwidth 1048576 bits/sec per publishing stream
mcu_janus.go:327: Maximum bandwidth 2097152 bits/sec per screensharing stream
mcu_janus.go:333: Created Janus session 8252900607398081
mcu_janus.go:340: Created Janus handle 7680244133440037
main.go:303: Using janus MCU
hub.go:408: Using a timeout of 10s for MCU requests
backend_server.go:114: No IPs configured for the stats endpoint, only allowing access from 127.0.0.1
main.go:384: Listening on 0.0.0.0:8081
client.go:355: Client from A.B.C.D [IP REDACTED] has RTT of 27 ms (27.342999ms)
client.go:355: Client from A.B.C.D [IP REDACTED] has RTT of 26 ms (26.675235ms)
...
client.go:355: Client from A.B.C.D [IP REDACTED] has RTT of 20 ms (20.659639ms)
client.go:355: Client from A.B.C.D [IP REDACTED] has RTT of 25 ms (25.417181ms)
root@localhost:~# docker logs nextcloud-aio-notify-push
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Waiting for Nextcloud to start...
Connection to nextcloud-aio-nextcloud (172.18.0.9) 9001 port [tcp/*] succeeded!
notify-push was started
[2025-01-13 04:03:33.062764 +00:00] ERROR [notify_push] src/main.rs:84: Self test failed: Error while communicating with nextcloud instance: error sending request for url (https://NEXTCLOUD_HOSTNAME_REDACTED/index.php/apps/notify_push/test/version)
root@localhost:~#

szaimen Jan 13, 2025
Maintainer

Hi, can you follow #1358?

fulldecent Jan 14, 2025

Thank you, I am debugging only Nextcloud Talk. And here are those logs:

No problem with hosts:

root@localhost:~# cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

And the program logs

root@localhost:~# cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

root@localhost:~# sudo docker exec -it nextcloud-aio-nextcloud bash
Warning: You have logged in into the Nextcloud container as root user.
See https://github.com/nextcloud/all-in-one#how-to-run-occ-commands if you want to run occ commands.
Apart from that, you can use 'sudo -u www-data -E php occ <your-command>' in order to run occ commands.
Of course <your-command> needs to be substituted with the command that you want to use.
31b0437f278d:/var/www/html# curl -vvv https://$NC_DOMAIN:443/standalone-signaling/api/v1/welcome
02:53:06.178023 [0-x] == Info: [READ] client_reset, clear readers
02:53:06.183235 [0-0] == Info: Host HOSTNAME_REDACTED:443 was resolved.
02:53:06.183965 [0-0] == Info: IPv6: (none)
02:53:06.184294 [0-0] == Info: IPv4: PUBLIC_IP_REDACTED
02:53:06.184550 [0-0] == Info: [HTTPS-CONNECT] added
02:53:06.184801 [0-0] == Info: [HTTPS-CONNECT] connect, init
02:53:06.184871 [0-0] == Info: [HTTPS-CONNECT] connect, check h21
02:53:06.184967 [0-0] == Info:   Trying PUBLIC_IP_REDACTED:443...
02:53:06.185756 [0-0] == Info: [HTTPS-CONNECT] connect -> 0, done=0
02:53:06.187816 [0-0] == Info: [HTTPS-CONNECT] adjust_pollset -> 1 socks
02:53:06.187903 [0-0] == Info: [HTTPS-CONNECT] connect, check h21
02:53:06.187989 [0-0] == Info: [SSL] cf_connect()
02:53:06.191037 [0-0] == Info: [SSL] No cached session ID for https://HOSTNAME_REDACTED:443
02:53:06.193500 [0-0] == Info: ALPN: curl offers h2,http/1.1
02:53:06.193841 [0-0] => Send SSL data, 5 bytes (0x5)
0000: .....
02:53:06.193928 [0-0] == Info: TLSv1.3 (OUT), TLS handshake, Client hello (1):
02:53:06.194020 [0-0] => Send SSL data, 512 bytes (0x200)
0000: .......C..~....?....".4.TI.....]..mz.. .bpG..Z.k..jF........M8..
0040: .._A3.h.>.......,.0.........+./...$.(.k.#.'.g.....9.....3.....=.
0080: <.5./.....u...%.#.. HOSTNAME_REDACTED............
00c0: .............................h2.http/1.1.........1.....0........
0100: .........................................+........-.....3.&.$...
0140:  ._.)....r...........d......h...p...............................
0180: ................................................................
01c0: ................................................................
02:53:06.198626 [0-0] == Info: [SSL] ossl_bio_cf_out_write(len=517) -> 517, err=0
02:53:06.199343 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> -1, err=81
02:53:06.199453 [0-0] == Info: [SSL] populate_x509_store, path=/etc/ssl/cert.pem, blob=0
02:53:06.218085 [0-0] == Info:  CAfile: /etc/ssl/cert.pem
02:53:06.220648 [0-0] == Info:  CApath: none
02:53:06.221948 [0-0] == Info: [SSL] SSL_connect() -> err=-1, detail=2
02:53:06.224039 [0-0] == Info: [SSL] SSL_connect() -> want recv
02:53:06.224117 [0-0] == Info: [SSL] cf_connect() -> 0, done=0
02:53:06.224190 [0-0] == Info: [HTTPS-CONNECT] connect -> 0, done=0
02:53:06.224279 [0-0] == Info: [SSL] adjust_pollset, POLLIN fd=4
02:53:06.224352 [0-0] == Info: [HTTPS-CONNECT] adjust_pollset -> 1 socks
02:53:06.225987 [0-0] == Info: [HTTPS-CONNECT] connect, check h21
02:53:06.226063 [0-0] == Info: [SSL] cf_connect()
02:53:06.226146 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.226233 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: ....z
02:53:06.226311 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=122) -> 122, err=0
02:53:06.226423 [0-0] == Info: TLSv1.3 (IN), TLS handshake, Server hello (2):
02:53:06.226510 [0-0] <= Recv SSL data, 122 bytes (0x7a)
0000: ...v..A...._.t....T..#.v?C..1A....\..O .bpG..Z.k..jF........M8..
0040: .._A3.h......+.....3.$... +..T....8.?..z........Ax....d.~f
02:53:06.227463 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.230547 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: .....
02:53:06.230954 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=1) -> 1, err=0
02:53:06.231041 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.231129 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: .... 
02:53:06.232744 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=32) -> 32, err=0
02:53:06.233493 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.233575 [0-0] == Info: TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
02:53:06.233702 [0-0] <= Recv SSL data, 15 bytes (0xf)
0000: .............h2
02:53:06.233835 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.233922 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: ....%
02:53:06.236203 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=2085) -> 2085, err=0
02:53:06.236558 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.236638 [0-0] == Info: TLSv1.3 (IN), TLS handshake, Certificate (11):
02:53:06.236725 [0-0] <= Recv SSL data, 2068 bytes (0x814)
0000: ...........0...0..(.........^Y..|..p....~P.'0...*.H.=...021.0...
0040: U....US1.0...U....Let's Encrypt1.0...U....E60...241220092517Z..2
0080: 50320092516Z0+1)0'..U... HOSTNAME_REDACTED0Y0...*
00c0: .H.=....*.H.=....B......#!)<.....e\.j.A ..i...*H...x[d.....[9.n.
0100: .I.w......q...#..[x....#0...0...U...........0...U.%..0...+......
0140: ...+.......0...U.......0.0...U........F=D.0..3.+z......c0...U.#.
0180: .0....'F...Qh....BH.#.X..0U..+........I0G0!..+.....0...http://e6
01c0: .o.lencr.org0"..+.....0...http://e6.i.lencr.org/0+..U...$0". HOS
0200: TNAME_REDACTED0...U. ..0.0...g.....0.....+.....y.
0240: ...........w...V...|...[.i....qgJ......[w..;.......C......H0F.!.
0280: ....[5...}'{?J,]Yf...;O..XB...G..!.....8...j.V;...z.S)O.W.......
02c0: ....v.........h6..a..M.Rx..r.r..M.moT.......E......G0E. ..Z*.d3.
0300: .......Z......K6....&.[[email protected].>'.I_E..Z.A&.tj...$.LK.0...*
0340: .H.=....i.0f.1..p.(E...[.gB...F.}......,m..W..S......)..bG<.j...
0380: 1.....v.......d4.6a....>C...[...:..A...}q..+P(A.......[0..W0..?.
03c0: ........W>.s.'p....:E+80...*.H........0O1.0...U....US1)0'..U... 
0400: Internet Security Research Group1.0...U....ISRG Root X10...24031
0440: 3000000Z..270312235959Z021.0...U....US1.0...U....Let's Encrypt1.
0480: 0...U....E60v0...*.H.=....+...".b.....F..!q`.&...........&.Q..a|
04c0: u..".9.....F.-<[email protected][email protected]{.....q...t....m.s.3..:..lb
0500: ......0..0...U...........0...U.%..0...+.........+.......0...U...
0540: ....0.......0...U.......'F...Qh....BH.#.X..0...U.#..0...y.Y.{...
0580: .s.....X...n02..+........&0$0"..+.....0...http://x1.i.lencr.org/
05c0: 0...U. ..0.0...g.....0'..U... 0.0.......http://x1.c.lencr.org/0.
0600: ..*.H.............}.{J 5.....n.N:.....\3...HM.........7.f.O.96.r
0640: e?3.....c....h/.!'.......6...m..........G.f....MG..K.......f.^u.
0680: H..if.ix7....a.......q......H.R..N..`..........y....),G......p..
06c0: ....Q.....c.CI.b>...R.AuF.....#.U....e{....ts........N.#..L/....
0700: .x^L......3.=..TP........."aq.{......W....P&A...Vh.R.B. ...$_..[
0740: .j.Ur2.b[..kz......._.5......Lw[>@.......<........kXv_.e...$j<K?
0780: .."....86RF..:a.R.2....o..}...Wg.7'...4/$....OMX<N:.........N...
07c0: ..rayI.}.....n$r.@....>.......C..J...CW@.....{.3y)......p.......
0800: .......".:.......N..
02:53:06.253328 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.257444 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: ....`
02:53:06.259123 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=96) -> 96, err=0
02:53:06.260113 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.260371 [0-0] == Info: TLSv1.3 (IN), TLS handshake, CERT verify (15):
02:53:06.260460 [0-0] <= Recv SSL data, 79 bytes (0x4f)
0000: ...K...G0E.!..1...6.J..!...--...Ue...[D....... ..........o....o.
0040: E.!..Us..d]....
02:53:06.260826 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.260913 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: ....5
02:53:06.260993 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=53) -> 53, err=0
02:53:06.261084 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.261166 [0-0] == Info: TLSv1.3 (IN), TLS handshake, Finished (20):
02:53:06.261251 [0-0] <= Recv SSL data, 36 bytes (0x24)
0000: ... 0.g..<..Fg.M$..#a@G.<T.+t....z..
02:53:06.261877 [0-0] => Send SSL data, 5 bytes (0x5)
0000: .....
02:53:06.266809 [0-0] == Info: TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
02:53:06.266910 [0-0] => Send SSL data, 1 bytes (0x1)
0000: .
02:53:06.267114 [0-0] => Send SSL data, 5 bytes (0x5)
0000: ....5
02:53:06.267191 [0-0] => Send SSL data, 1 bytes (0x1)
0000: .
02:53:06.267262 [0-0] == Info: TLSv1.3 (OUT), TLS handshake, Finished (20):
02:53:06.267346 [0-0] => Send SSL data, 36 bytes (0x24)
0000: ... ........J......q.,...w..!...k.B.
02:53:06.271533 [0-0] == Info: [SSL] ossl_bio_cf_out_write(len=64) -> 64, err=0
02:53:06.272763 [0-0] == Info: SSL connection using TLSv1.3 / TLS_AES_128_GCM_SHA256 / x25519 / id-ecPublicKey
02:53:06.272893 [0-0] == Info: ALPN: server accepted h2
02:53:06.272966 [0-0] == Info: Server certificate:
02:53:06.273036 [0-0] == Info:  subject: CN=HOSTNAME_REDACTED
02:53:06.273135 [0-0] == Info:  start date: Dec 20 09:25:17 2024 GMT
02:53:06.276271 [0-0] == Info:  expire date: Mar 20 09:25:16 2025 GMT
02:53:06.277397 [0-0] == Info:  subjectAltName: host "HOSTNAME_REDACTED" matched cert's "HOSTNAME_REDACTED"
02:53:06.277581 [0-0] == Info:  issuer: C=US; O=Let's Encrypt; CN=E6
02:53:06.277667 [0-0] == Info:  SSL certificate verify ok.
02:53:06.277769 [0-0] == Info:   Certificate level 0: Public key type EC/prime256v1 (256/128 Bits/secBits), signed using ecdsa-with-SHA384
02:53:06.277950 [0-0] == Info:   Certificate level 1: Public key type EC/secp384r1 (384/192 Bits/secBits), signed using sha256WithRSAEncryption
02:53:06.278121 [0-0] == Info:   Certificate level 2: Public key type RSA (4096/152 Bits/secBits), signed using sha256WithRSAEncryption
02:53:06.278281 [0-0] == Info: [SSL] cf_connect() -> 0, done=1
02:53:06.282718 [0-0] == Info: [HTTPS-CONNECT] connect+handshake h21: 97ms, 1st data: 41ms
02:53:06.282943 [0-0] == Info: [HTTP/2] [0] created h2 session
02:53:06.283068 [0-0] == Info: [HTTP/2] [0] -> FRAME[SETTINGS, len=18]
02:53:06.283159 [0-0] == Info: [HTTP/2] [0] -> FRAME[WINDOW_UPDATE, incr=1048510465]
02:53:06.283268 [0-0] == Info: [HTTP/2] cf_connect() -> 0, 1, 
02:53:06.286232 [0-0] == Info: [HTTPS-CONNECT] connect -> 0, done=1
02:53:06.287590 [0-0] == Info: Connected to HOSTNAME_REDACTED (PUBLIC_IP_REDACTED) port 443
02:53:06.287705 [0-0] == Info: using HTTP/2
02:53:06.287796 [0-0] == Info: [HTTP/2] [1] OPENED stream for https://HOSTNAME_REDACTED:443/standalone-signaling/api/v1/welcome
02:53:06.287955 [0-0] == Info: [HTTP/2] [1] [:method: GET]
02:53:06.288022 [0-0] == Info: [HTTP/2] [1] [:scheme: https]
02:53:06.288090 [0-0] == Info: [HTTP/2] [1] [:authority: HOSTNAME_REDACTED]
02:53:06.288193 [0-0] == Info: [HTTP/2] [1] [:path: /standalone-signaling/api/v1/welcome]
02:53:06.288295 [0-0] == Info: [HTTP/2] [1] [user-agent: curl/8.11.1]
02:53:06.291271 [0-0] == Info: [HTTP/2] [1] [accept: */*]
02:53:06.292972 [0-0] == Info: [HTTP/2] [1] submit -> 129, 0
02:53:06.293927 [0-0] == Info: [HTTP/2] [1] -> FRAME[HEADERS, len=70, hend=1, eos=1]
02:53:06.294091 [0-0] => Send SSL data, 5 bytes (0x5)
0000: .....
02:53:06.295491 [0-0] => Send SSL data, 1 bytes (0x1)
0000: .
02:53:06.295613 [0-0] == Info: [SSL] ossl_bio_cf_out_write(len=165) -> 165, err=0
02:53:06.295711 [0-0] == Info: [HTTP/2] [0] egress: wrote 143 bytes
02:53:06.295789 [0-0] == Info: [HTTP/2] [1] cf_send(len=129) -> 129, 0, eos=1, h2 windows 65535-65535 (stream-conn), buffers 0-0 (stream-conn)
02:53:06.295950 [0-0] => Send header, 129 bytes (0x81)
0000: GET /standalone-signaling/api/v1/welcome HTTP/2
0031: Host: HOSTNAME_REDACTED
0059: User-Agent: curl/8.11.1
0072: Accept: */*
007f: 
02:53:06.296240 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.296333 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: .....
02:53:06.299930 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=139) -> 139, err=0
02:53:06.300915 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.301060 [0-0] == Info: TLSv1.3 (IN), TLS handshake, Newsession Ticket (4):
02:53:06.301159 [0-0] <= Recv SSL data, 122 bytes (0x7a)
0000: ...v..:..N....iR.hY.V.V.rb..%......^...............u..w.<.D.."~.
0040: ...O/w.o;....D....s.dZ.!x.......:e,..2I....\..K*E....C|...
02:53:06.304483 [0-0] == Info: [SSL] No cached session ID for https://HOSTNAME_REDACTED:443
02:53:06.305350 [0-0] == Info: [SSL] Added Session ID to cache for https://HOSTNAME_REDACTED:443 [server]
02:53:06.305552 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.305639 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: ....8
02:53:06.305715 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=56) -> 56, err=0
02:53:06.305838 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.305916 [0-0] == Info: [SSL] cf_recv(len=16384) -> 39, 0
02:53:06.305996 [0-0] == Info: [HTTP/2] [0] ingress: read 39 bytes
02:53:06.306094 [0-0] == Info: [HTTP/2] [0] <- FRAME[SETTINGS, len=30]
02:53:06.306174 [0-0] == Info: [HTTP/2] [0] MAX_CONCURRENT_STREAMS: 250
02:53:06.306255 [0-0] == Info: [HTTP/2] [0] ENABLE_PUSH: TRUE
02:53:06.306332 [0-0] == Info: [HTTP/2] [0] notify MAX_CONCURRENT_STREAMS: 250
02:53:06.310528 [0-0] == Info: [HTTP/2] [1] DRAIN select_bits=1
02:53:06.310611 [0-0] == Info: [HTTP/2] [0] progress ingress: inbufg=0
02:53:06.310714 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.310804 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: .....
02:53:06.310889 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=30) -> 30, err=0
02:53:06.310987 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.311058 [0-0] == Info: [SSL] cf_recv(len=16384) -> 13, 0
02:53:06.311132 [0-0] == Info: [HTTP/2] [0] ingress: read 13 bytes
02:53:06.311218 [0-0] == Info: [HTTP/2] [0] <- FRAME[WINDOW_UPDATE, incr=983041]
02:53:06.311313 [0-0] == Info: [HTTP/2] [0] progress ingress: inbufg=0
02:53:06.311540 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.311642 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: .....
02:53:06.311743 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=26) -> 26, err=0
02:53:06.311905 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.311981 [0-0] == Info: [SSL] cf_recv(len=16384) -> 9, 0
02:53:06.312053 [0-0] == Info: [HTTP/2] [0] ingress: read 9 bytes
02:53:06.312139 [0-0] == Info: [HTTP/2] [0] <- FRAME[SETTINGS, ack=1]
02:53:06.312219 [0-0] == Info: [HTTP/2] [0] progress ingress: inbufg=0
02:53:06.313024 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.315111 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: .....
02:53:06.317711 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=219) -> 219, err=0
02:53:06.320859 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.320970 [0-0] == Info: [SSL] cf_recv(len=16384) -> 202, 0
02:53:06.321064 [0-0] == Info: [HTTP/2] [0] ingress: read 202 bytes
02:53:06.321178 [0-0] <= Recv header, 13 bytes (0xd)
0000: HTTP/2 200 
02:53:06.321286 [0-0] == Info: [WRITE] cw_out, wrote 13 header bytes -> 13
02:53:06.323802 [0-0] == Info: [WRITE] download_write header(type=c, blen=13) -> 0
02:53:06.323918 [0-0] == Info: [WRITE] client_write(type=c, len=13) -> 0
02:53:06.324020 [0-0] == Info: [HTTP/2] [1] local window update by 10420224
02:53:06.324137 [0-0] == Info: [HTTP/2] [1] status: HTTP/2 200
02:53:06.324249 [0-0] <= Recv header, 32 bytes (0x20)
0000: alt-svc: h3=":443"; ma=2592000
02:53:06.327454 [0-0] == Info: [WRITE] header_collect pushed(type=1, len=32) -> 0
02:53:06.328146 [0-0] == Info: [WRITE] cw_out, wrote 32 header bytes -> 32
02:53:06.328247 [0-0] == Info: [WRITE] download_write header(type=4, blen=32) -> 0
02:53:06.328379 [0-0] == Info: [WRITE] client_write(type=4, len=32) -> 0
02:53:06.328483 [0-0] == Info: [HTTP/2] [1] header: alt-svc: h3=":443"; ma=2592000
02:53:06.328609 [0-0] <= Recv header, 47 bytes (0x2f)
0000: content-type: application/json; charset=utf-8
02:53:06.328763 [0-0] == Info: [WRITE] header_collect pushed(type=1, len=47) -> 0
02:53:06.328877 [0-0] == Info: [WRITE] cw_out, wrote 47 header bytes -> 47
02:53:06.328982 [0-0] == Info: [WRITE] download_write header(type=4, blen=47) -> 0
02:53:06.329088 [0-0] == Info: [WRITE] client_write(type=4, len=47) -> 0
02:53:06.329189 [0-0] == Info: [HTTP/2] [1] header: content-type: application/json; charset=utf-8
02:53:06.329330 [0-0] <= Recv header, 37 bytes (0x25)
0000: date: Tue, 14 Jan 2025 02:53:06 GMT
02:53:06.334575 [0-0] == Info: [WRITE] header_collect pushed(type=1, len=37) -> 0
02:53:06.337427 [0-0] == Info: [WRITE] cw_out, wrote 37 header bytes -> 37
02:53:06.337532 [0-0] == Info: [WRITE] download_write header(type=4, blen=37) -> 0
02:53:06.337647 [0-0] == Info: [WRITE] client_write(type=4, len=37) -> 0
02:53:06.337771 [0-0] == Info: [HTTP/2] [1] header: date: Tue, 14 Jan 2025 02:53:06 GMT
02:53:06.337907 [0-0] <= Recv header, 160 bytes (0xa0)
0000: x-spreed-signaling-features: audio-video-permissions, dialout, f
0040: ederation, hello-v2, incall-all, mcu, simulcast, switchto, trans
0080: ient-data, update-sdp, welcome
02:53:06.338240 [0-0] == Info: [WRITE] header_collect pushed(type=1, len=160) -> 0
02:53:06.338356 [0-0] == Info: [WRITE] cw_out, wrote 160 header bytes -> 160
02:53:06.343116 [0-0] == Info: [WRITE] download_write header(type=4, blen=160) -> 0
02:53:06.344296 [0-0] == Info: [WRITE] client_write(type=4, len=160) -> 0
02:53:06.344411 [0-0] == Info: [HTTP/2] [1] header: x-spreed-signaling-features: audio-video-permissions, dialout, federation, hello-v2, incall-all, mcu, simulcast, switchto, transient-data, update-sdp, welcome
02:53:06.344709 [0-0] <= Recv header, 20 bytes (0x14)
0000: content-length: 66
02:53:06.344816 [0-0] == Info: [WRITE] header_collect pushed(type=1, len=20) -> 0
02:53:06.344912 [0-0] == Info: [WRITE] cw_out, wrote 20 header bytes -> 20
02:53:06.345003 [0-0] == Info: [WRITE] download_write header(type=4, blen=20) -> 0
02:53:06.345112 [0-0] == Info: [WRITE] client_write(type=4, len=20) -> 0
02:53:06.345212 [0-0] == Info: [HTTP/2] [1] header: content-length: 66
02:53:06.345309 [0-0] == Info: [HTTP/2] [1] <- FRAME[HEADERS, len=193, hend=1, eos=0]
02:53:06.350115 [0-0] <= Recv header, 2 bytes (0x2)
0000: 
02:53:06.351870 [0-0] == Info: [WRITE] header_collect pushed(type=1, len=2) -> 0
02:53:06.352434 [0-0] == Info: [WRITE] cw_out, wrote 2 header bytes -> 2
02:53:06.352523 [0-0] == Info: [WRITE] download_write header(type=4, blen=2) -> 0
02:53:06.352631 [0-0] == Info: [WRITE] client_write(type=4, len=2) -> 0
02:53:06.352729 [0-0] == Info: [HTTP/2] [0] progress ingress: inbufg=0
02:53:06.352848 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=5) -> 5, err=0
02:53:06.352951 [0-0] <= Recv SSL data, 5 bytes (0x5)
0000: ....\
02:53:06.353051 [0-0] == Info: [SSL] ossl_bio_cf_in_read(len=92) -> 92, err=0
02:53:06.353173 [0-0] <= Recv SSL data, 1 bytes (0x1)
0000: .
02:53:06.353261 [0-0] == Info: [SSL] cf_recv(len=16384) -> 75, 0
02:53:06.353352 [0-0] == Info: [HTTP/2] [0] ingress: read 75 bytes
02:53:06.357414 [0-0] <= Recv data, 66 bytes (0x42)
0000: {"nextcloud-spreed-signaling":"Welcome","version":"2.0.1~docker"
0040: }.
{"nextcloud-spreed-signaling":"Welcome","version":"2.0.1~docker"}
02:53:06.358058 [0-0] == Info: [WRITE] cw_out, wrote 66 body bytes -> 66
02:53:06.358159 [0-0] == Info: [WRITE] download_write body(type=1, blen=66) -> 0
02:53:06.358249 [0-0] == Info: [WRITE] client_write(type=1, len=66) -> 0
02:53:06.358354 [0-0] == Info: [WRITE] xfer_write_resp(len=66, eos=0) -> 0
02:53:06.361359 [0-0] == Info: [HTTP/2] [1] <- FRAME[DATA, len=66, eos=1, padlen=0]
02:53:06.362330 [0-0] == Info: [HTTP/2] [1] DATA, window=66/10485760
02:53:06.362451 [0-0] == Info: [HTTP/2] [1] CLOSED
02:53:06.362508 [0-0] == Info: [HTTP/2] [1] DRAIN select_bits=1
02:53:06.362600 [0-0] == Info: [HTTP/2] [0] progress ingress: inbufg=0
02:53:06.362706 [0-0] == Info: [HTTP/2] [1] DRAIN select_bits=1
02:53:06.362865 [0-0] == Info: [HTTP/2] [0] progress ingress: done
02:53:06.362958 [0-0] == Info: [HTTP/2] [1] returning CLOSE
02:53:06.363041 [0-0] == Info: [HTTP/2] handle_stream_close -> 0, 0
02:53:06.363139 [0-0] == Info: [HTTP/2] [0] -> FRAME[SETTINGS, ack=1]
02:53:06.363260 [0-0] => Send SSL data, 5 bytes (0x5)
0000: .....
02:53:06.363354 [0-0] => Send SSL data, 1 bytes (0x1)
0000: .
02:53:06.367435 [0-0] == Info: [SSL] ossl_bio_cf_out_write(len=31) -> 31, err=0
02:53:06.368709 [0-0] == Info: [HTTP/2] [0] egress: wrote 9 bytes
02:53:06.368817 [0-0] == Info: [HTTP/2] [1] cf_recv(len=102400) -> 0 0, window=-1/-1, connection 1048575934/1048576000
02:53:06.368986 [0-0] == Info: abort upload
02:53:06.369052 [0-0] <= Recv data, 0 bytes (0x0)
02:53:06.369124 [0-0] == Info: [WRITE] download_write body(type=81, blen=0) -> 0
02:53:06.369239 [0-0] == Info: [WRITE] client_write(type=81, len=0) -> 0
02:53:06.372732 [0-0] == Info: [WRITE] xfer_write_resp(len=0, eos=1) -> 0
02:53:06.374969 [0-0] == Info: [WRITE] cw-out is notpaused
02:53:06.375061 [0-0] == Info: [WRITE] cw-out done
02:53:06.375157 [0-0] == Info: [READ] client_reset, clear readers
02:53:06.375272 [0-0] == Info: Connection #0 to host HOSTNAME_REDACTED left intact
31b0437f278d:/var/www/html# exit
exit
root@localhost:~#

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Stun server issue on clean install #1986

{{title}}

Replies: 9 comments 21 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Stun server issue on clean install #1986

Schutten Feb 14, 2023

Replies: 9 comments · 21 replies

szaimen Feb 14, 2023 Maintainer

Schutten Feb 14, 2023 Author

szaimen Feb 14, 2023 Maintainer

Schutten Feb 14, 2023 Author

szaimen Feb 14, 2023 Maintainer

Schutten Feb 14, 2023 Author

szaimen Feb 14, 2023 Maintainer

Schutten Feb 14, 2023 Author

Schutten Feb 14, 2023 Author

szaimen Feb 14, 2023 Maintainer

Schutten Feb 14, 2023 Author

szaimen Feb 14, 2023 Maintainer

szaimen Feb 14, 2023 Maintainer

Schutten Feb 14, 2023 Author

szaimen Feb 14, 2023 Maintainer

Schutten Feb 14, 2023 Author

Schutten Feb 14, 2023 Author

szaimen Apr 18, 2023 Maintainer

szaimen Apr 18, 2023 Maintainer

szaimen Feb 14, 2023 Maintainer

szaimen Feb 26, 2023 Maintainer

TommasoCostanzo Mar 5, 2023

szaimen Mar 15, 2023 Maintainer

TommasoCostanzo Mar 15, 2023

szaimen Mar 15, 2023 Maintainer

TommasoCostanzo Mar 15, 2023

fulldecent Jan 13, 2025

fulldecent Jan 13, 2025

szaimen Jan 13, 2025 Maintainer

fulldecent Jan 14, 2025

Schutten
Feb 14, 2023

Replies: 9 comments 21 replies

szaimen
Feb 14, 2023
Maintainer

Schutten Feb 14, 2023
Author

szaimen
Feb 14, 2023
Maintainer

Schutten Feb 14, 2023
Author

szaimen Feb 14, 2023
Maintainer

Schutten Feb 14, 2023
Author

szaimen Feb 14, 2023
Maintainer

Schutten
Feb 14, 2023
Author

Schutten Feb 14, 2023
Author

szaimen Feb 14, 2023
Maintainer

Schutten Feb 14, 2023
Author

szaimen
Feb 14, 2023
Maintainer

szaimen Feb 14, 2023
Maintainer

Schutten Feb 14, 2023
Author

szaimen Feb 14, 2023
Maintainer

Schutten
Feb 14, 2023
Author

Schutten Feb 14, 2023
Author

szaimen Apr 18, 2023
Maintainer

szaimen Apr 18, 2023
Maintainer

szaimen
Feb 14, 2023
Maintainer

szaimen
Feb 26, 2023
Maintainer

szaimen Mar 15, 2023
Maintainer

TommasoCostanzo
Mar 15, 2023

szaimen Mar 15, 2023
Maintainer

fulldecent
Jan 13, 2025

szaimen Jan 13, 2025
Maintainer