[BFW-6539] [FEATURE REQUEST] Acknowledge the acoustic signal without resetting, in the event of an error

[U-B-Glade]

Printer model

MK3.9

Describe the feature

In the event of an error, the beeper emits a continuous sound. Allowing the issue to be analyzed calmly, it would be helpful if the beeper could be silenced without needing to reset the printer.

Expected functionality

No response

[CZDanol]

Hello, what error do you mean specifically? BSOD? Generally, you can silence the beeping by turning/pressing the knob.

…

On Thu, 2 Jan 2025, 17:57 Uwe, ***@***.***> wrote: Printer model MK3.9 Describe the feature In the event of an error, the beeper emits a continuous sound. Allowing the issue to be analyzed calmly, it would be helpful if the beeper could be silenced without needing to reset the printer. Expected functionality *No response* — Reply to this email directly, view it on GitHub <#4384>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA4JITPGV6Z3N55RM2PYVX32IVVZJAVCNFSM6AAAAABUQJAYJWVHI2DSMVQWIX3LMV43ASLTON2WKOZSG43DMMZUHEYTQMQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[U-B-Glade]

Hello , I have an Overcurrent Error (False Number but is another issue #4383 ) and if I try to figure out, what was the Problem I try to Acknowledge the Signal by Preessing the Button, but that triggered a reset. The Printer Reboot and the Error occurred again with the PEEP.

[CZDanol]

Okay, and rotating the knob does not silence the error?

[U-B-Glade]

Oh, I didn't even think about rotating. This was counterintuitive to me.

[CZDanol]

🤔 It might make sense to not reset the printer on knob press, but require the reset button press. I've created an internal ticket BFW-6539 so we think it over a bit.