diff --git a/Firmware/messages.cpp b/Firmware/messages.cpp
index 1c5a31c309..0dc91b4900 100644
--- a/Firmware/messages.cpp
+++ b/Firmware/messages.cpp
@@ -254,7 +254,9 @@ extern const char MSG_LOADING_COLOR [] PROGMEM_I1 = ISTR("Loading color"); ////M
 extern const char MSG_CORRECTLY [] PROGMEM_I1 = ISTR("Changed correctly"); ////MSG_CORRECTLY c=19
 extern const char MSG_NOT_LOADED [] PROGMEM_I1 = ISTR("Filament not loaded"); ////MSG_NOT_LOADED c=19
 extern const char MSG_NOT_COLOR [] PROGMEM_I1 = ISTR("Color not correct"); ////MSG_NOT_COLOR c=19
+#ifndef REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
 extern const char MSG_AUTOLOADING_ENABLED [] PROGMEM_I1 = ISTR("Autoloading filament is active, just press the knob and insert filament..."); ////MSG_AUTOLOADING_ENABLED c=20 r=4
+#endif //REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
 extern const char MSG_FILAMENT_USED [] PROGMEM_I1 = ISTR("Filament used"); ////MSG_FILAMENT_USED c=19
 extern const char MSG_PRINT_TIME [] PROGMEM_I1 = ISTR("Print time"); ////MSG_PRINT_TIME c=19
 extern const char MSG_TOTAL_FILAMENT [] PROGMEM_I1 = ISTR("Total filament"); ////MSG_TOTAL_FILAMENT c=19
diff --git a/Firmware/messages.h b/Firmware/messages.h
index 8ce0568406..63ed2bec92 100644
--- a/Firmware/messages.h
+++ b/Firmware/messages.h
@@ -253,7 +253,9 @@ extern const char MSG_LOADING_COLOR [];
 extern const char MSG_CORRECTLY [];
 extern const char MSG_NOT_LOADED [];
 extern const char MSG_NOT_COLOR [];
+#ifndef REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
 extern const char MSG_AUTOLOADING_ENABLED [];
+#endif //REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
 extern const char MSG_FILAMENT_USED [];
 extern const char MSG_PRINT_TIME [];
 extern const char MSG_TOTAL_FILAMENT [];
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index 0faec8a907..1f8798d85a 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -2277,13 +2277,13 @@ void lcd_load_filament_color_check()
     }
 }
 
-#ifdef FILAMENT_SENSOR
+#if defined(FILAMENT_SENSOR) && !defined(REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY)
 static void lcd_menu_AutoLoadFilament()
 {
     lcd_display_message_fullscreen_nonBlocking_P(_T(MSG_AUTOLOADING_ENABLED));
     menu_back_if_clicked();
 }
-#endif //FILAMENT_SENSOR
+#endif //FILAMENT_SENSOR && REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
 
 static void preheat_or_continue(FilamentAction action) {
 
@@ -5321,13 +5321,16 @@ static void lcd_main_menu()
                     if (!fsensor.getAutoLoadEnabled()) {
                         MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), lcd_LoadFilament);
                     }
-                    if (!fsensor.getFilamentPresent()) {
+                    if (fsensor.getFilamentPresent()) {
+                        MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), lcd_unLoadFilament);
+                    }
+#ifndef REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+                    else {
                         if (fsensor.getAutoLoadEnabled()) {
                             MENU_ITEM_SUBMENU_P(_T(MSG_AUTOLOAD_FILAMENT), lcd_menu_AutoLoadFilament);
-                        }
-                    } else {
-                        MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), lcd_unLoadFilament);
+                        }                        
                     }
+#endif //REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY 
                 } else {
 #endif //FILAMENT_SENSOR
                     MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), lcd_LoadFilament);
diff --git a/Firmware/variants/MK25-RAMBo10a.h b/Firmware/variants/MK25-RAMBo10a.h
index 77cced0bed..125ca6ee10 100644
--- a/Firmware/variants/MK25-RAMBo10a.h
+++ b/Firmware/variants/MK25-RAMBo10a.h
@@ -520,4 +520,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK25-RAMBo13a.h b/Firmware/variants/MK25-RAMBo13a.h
index 9f081885f5..a7348e643e 100644
--- a/Firmware/variants/MK25-RAMBo13a.h
+++ b/Firmware/variants/MK25-RAMBo13a.h
@@ -524,4 +524,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK25S-RAMBo10a.h b/Firmware/variants/MK25S-RAMBo10a.h
index b047cb00d3..efa7e1b933 100644
--- a/Firmware/variants/MK25S-RAMBo10a.h
+++ b/Firmware/variants/MK25S-RAMBo10a.h
@@ -528,4 +528,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK25S-RAMBo13a.h b/Firmware/variants/MK25S-RAMBo13a.h
index 9ef7f3bd7b..181deefc21 100644
--- a/Firmware/variants/MK25S-RAMBo13a.h
+++ b/Firmware/variants/MK25S-RAMBo13a.h
@@ -529,4 +529,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK3-E3DREVO.h b/Firmware/variants/MK3-E3DREVO.h
index 9232f84627..ea6003cabe 100644
--- a/Firmware/variants/MK3-E3DREVO.h
+++ b/Firmware/variants/MK3-E3DREVO.h
@@ -687,4 +687,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK3-E3DREVO_HF_60W.h b/Firmware/variants/MK3-E3DREVO_HF_60W.h
index ace4553d55..91d8c8d348 100644
--- a/Firmware/variants/MK3-E3DREVO_HF_60W.h
+++ b/Firmware/variants/MK3-E3DREVO_HF_60W.h
@@ -688,4 +688,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK3.h b/Firmware/variants/MK3.h
index 8b0651f257..1b4248f563 100644
--- a/Firmware/variants/MK3.h
+++ b/Firmware/variants/MK3.h
@@ -690,4 +690,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK3S-E3DREVO.h b/Firmware/variants/MK3S-E3DREVO.h
index 70aef3d4d2..cc6f1607fc 100644
--- a/Firmware/variants/MK3S-E3DREVO.h
+++ b/Firmware/variants/MK3S-E3DREVO.h
@@ -699,4 +699,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK3S-E3DREVO_HF_60W.h b/Firmware/variants/MK3S-E3DREVO_HF_60W.h
index cf576d82da..f548de0432 100644
--- a/Firmware/variants/MK3S-E3DREVO_HF_60W.h
+++ b/Firmware/variants/MK3S-E3DREVO_HF_60W.h
@@ -700,4 +700,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/MK3S.h b/Firmware/variants/MK3S.h
index 6d2027671f..113df38eb3 100644
--- a/Firmware/variants/MK3S.h
+++ b/Firmware/variants/MK3S.h
@@ -702,4 +702,11 @@
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/obsolete/1_75mm_MK2-RAMBo10a-E3Dv6full.h b/Firmware/variants/obsolete/1_75mm_MK2-RAMBo10a-E3Dv6full.h
index b9c970b370..aea0850d55 100644
--- a/Firmware/variants/obsolete/1_75mm_MK2-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/obsolete/1_75mm_MK2-RAMBo10a-E3Dv6full.h
@@ -430,4 +430,11 @@ THERMISTORS SETTINGS
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/Firmware/variants/obsolete/1_75mm_MK2-RAMBo13a-E3Dv6full.h b/Firmware/variants/obsolete/1_75mm_MK2-RAMBo13a-E3Dv6full.h
index b89d95f9be..cc5f411ad6 100644
--- a/Firmware/variants/obsolete/1_75mm_MK2-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/obsolete/1_75mm_MK2-RAMBo13a-E3Dv6full.h
@@ -429,4 +429,11 @@ THERMISTORS SETTINGS
 #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
 #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
 
+/*------------------------------------
+ COMMUNITY FEATURES
+ *------------------------------------*/
+
+//Uncomment to remove the "AutoLoad filament" LCD menu entry if autoload is enabled.
+//#define REMOVE_AUTOLOAD_FILAMENT_MENU_ENTRY
+
 #endif //__CONFIGURATION_PRUSA_H
diff --git a/lang/po/Firmware.pot b/lang/po/Firmware.pot
index 7ef7dc553b..906e469492 100644
--- a/lang/po/Firmware.pot
+++ b/lang/po/Firmware.pot
@@ -90,12 +90,6 @@ msgstr ""
 msgid "AutoLoad filament"
 msgstr ""
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_cs.po b/lang/po/Firmware_cs.po
index 99c7b44786..bd72758893 100644
--- a/lang/po/Firmware_cs.po
+++ b/lang/po/Firmware_cs.po
@@ -99,14 +99,6 @@ msgstr "Automat."
 msgid "AutoLoad filament"
 msgstr "AutoZavedení fil."
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Automatické zavádění filamentu aktivní, stiskněte tlačítko a vložte "
-"filament."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_de.po b/lang/po/Firmware_de.po
index 52b3a6f204..cde515a307 100644
--- a/lang/po/Firmware_de.po
+++ b/lang/po/Firmware_de.po
@@ -99,14 +99,6 @@ msgstr "Auto Leist"
 msgid "AutoLoad filament"
 msgstr "AutoLaden Filament"
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Automatisches Fila- ment Laden ist aktiv , Knopf drücken und Filament "
-"einlegen..."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_es.po b/lang/po/Firmware_es.po
index 6eec2af073..7558f851d2 100644
--- a/lang/po/Firmware_es.po
+++ b/lang/po/Firmware_es.po
@@ -99,13 +99,6 @@ msgstr "Encendido"
 msgid "AutoLoad filament"
 msgstr "Carga auto. filam."
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"La carga automática está activada, pulse el dial e inserte el filamento..."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_fr.po b/lang/po/Firmware_fr.po
index b05ee59326..5facdf46fc 100644
--- a/lang/po/Firmware_fr.po
+++ b/lang/po/Firmware_fr.po
@@ -99,13 +99,6 @@ msgstr "Puiss.auto"
 msgid "AutoLoad filament"
 msgstr "Autocharge du fil."
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Chargement auto. du fil. active, appuyez sur le bouton et insérez le fil."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_hr.po b/lang/po/Firmware_hr.po
index dea20725db..689017417a 100644
--- a/lang/po/Firmware_hr.po
+++ b/lang/po/Firmware_hr.po
@@ -99,12 +99,6 @@ msgstr "Auto napaj"
 msgid "AutoLoad filament"
 msgstr "Autopunj filamenta"
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr "Auto punjenje fil. je aktivno, pritisnite gumb i umetnite fil.."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_hu.po b/lang/po/Firmware_hu.po
index 6a43dbb6f4..9f06e46962 100644
--- a/lang/po/Firmware_hu.po
+++ b/lang/po/Firmware_hu.po
@@ -99,12 +99,6 @@ msgstr "Auto ero"
 msgid "AutoLoad filament"
 msgstr "Fil. auto.betolt."
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr "Autom. betoltes be, nyomd meg a gombot es helyzed be a filamentet."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_it.po b/lang/po/Firmware_it.po
index 093c82b9d4..24d0cd8861 100644
--- a/lang/po/Firmware_it.po
+++ b/lang/po/Firmware_it.po
@@ -99,13 +99,6 @@ msgstr "Automatico"
 msgid "AutoLoad filament"
 msgstr "Autocaric. filam."
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Caricamento automatico attivo, premi la manopola e inserisci il filam."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_nl.po b/lang/po/Firmware_nl.po
index e587951fa3..35f7312af6 100644
--- a/lang/po/Firmware_nl.po
+++ b/lang/po/Firmware_nl.po
@@ -99,13 +99,6 @@ msgstr "Auto power"
 msgid "AutoLoad filament"
 msgstr "Autoladen filament"
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Automatisch laden van flament is actief, druk de knop en laad filament..."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_no.po b/lang/po/Firmware_no.po
index a3aceb78c2..cb3adfc686 100644
--- a/lang/po/Firmware_no.po
+++ b/lang/po/Firmware_no.po
@@ -99,13 +99,6 @@ msgstr "Autostyrke"
 msgid "AutoLoad filament"
 msgstr "AutoLast filament"
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Autolasting av fil. er aktivert. Trykk på knappen og sett inn filament..."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_pl.po b/lang/po/Firmware_pl.po
index 251e686d03..84e8e13fb4 100644
--- a/lang/po/Firmware_pl.po
+++ b/lang/po/Firmware_pl.po
@@ -99,13 +99,6 @@ msgstr "Automatycz"
 msgid "AutoLoad filament"
 msgstr "Autoładowanie fil."
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Autoładowanie filamentu włączone, naciśnij pokrętło i wsuń filament..."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_ro.po b/lang/po/Firmware_ro.po
index 03eaf90028..1d93ac6f2d 100644
--- a/lang/po/Firmware_ro.po
+++ b/lang/po/Firmware_ro.po
@@ -99,14 +99,6 @@ msgstr "Put. auto"
 msgid "AutoLoad filament"
 msgstr "Înc.auto filament"
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Încărcarea automată de filament pornită; apăsați butonul și încărcați "
-"filamentul"
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_sk.po b/lang/po/Firmware_sk.po
index be54da8269..cb2a9e1556 100644
--- a/lang/po/Firmware_sk.po
+++ b/lang/po/Firmware_sk.po
@@ -99,13 +99,6 @@ msgstr "Automat."
 msgid "AutoLoad filament"
 msgstr "Autozav. filamentu"
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Autom. zavedenie filamentu aktívne, stlačte tlačidlo a vložte filament..."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42
diff --git a/lang/po/Firmware_sv.po b/lang/po/Firmware_sv.po
index 40d9a6cd47..59ecc04d08 100644
--- a/lang/po/Firmware_sv.po
+++ b/lang/po/Firmware_sv.po
@@ -99,13 +99,6 @@ msgstr "Auto kraft"
 msgid "AutoLoad filament"
 msgstr "Autoladda filament"
 
-#. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/messages.cpp:257 ../../Firmware/ultralcd.cpp:2289
-msgid ""
-"Autoloading filament is active, just press the knob and insert filament..."
-msgstr ""
-"Autoladdning av filament är aktiv, tryck på knappen och sätt i filament."
-
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
 #: ../../Firmware/mmu2_progress_converter.cpp:42