diff --git a/README.md b/README.md
index 538990b..baf19af 100644
--- a/README.md
+++ b/README.md
@@ -25,8 +25,8 @@ Each kernel release tarball currently provides the following files:
 * `/boot/config` (the configuration used to build the kernel);
 * `/boot/Module.symvers.xz` (a table mapping exported symbols to provider, compressed);
 * `/boot/System.map.xz` (the kernel's symbol table, compressed);
-* `/boot/bcm-2710-rpi-3-b.dtb`, `/boot/bcm-2710-rpi-3-b-plus.dtb` and `/boot/bcm-2837-rpi-3-b.dtb` (and, from `5.4.65.20200922` onwards, `/boot/bcm2710-rpi-cm3.dtb`) (the device tree blobs);
-* `/boot/overlays/...` (the device tree blob overlays) (from `5.4.65.20200922`);
+* `/boot/bcm-2710-rpi-3-b.dtb`, `/boot/bcm-2710-rpi-3-b-plus.dtb` and `/boot/bcm-2837-rpi-3-b.dtb` (and, from `5.4.68.20200929` onwards, `/boot/bcm2710-rpi-cm3.dtb`) (the device tree blobs);
+* `/boot/overlays/...` (the device tree blob overlays) (from `5.4.68.20200929`);
 * `/lib/modules/<kernel release name>/...` (the module set for the kernel);
 * `/lib/firmware/...` (the kernel-built firmware, for [< 4.14 only](http://lkml.iu.edu/hypermail/linux/kernel/1709.1/04650.html)).
 
@@ -38,7 +38,7 @@ The current kernel tarball may be downloaded from the link below (or via `wget`,
 
 Variant | Version | Most Recent Image
 :--- | ---: | ---:
-Kernel, dtbs, modules and (kernel) firmware | 5.4.65.20200922 | [bcmrpi3-kernel-5.4.65.20200922.tar.xz](https://github.com/sakaki-/bcmrpi3-kernel/releases/download/5.4.65.20200922/bcmrpi3-kernel-5.4.65.20200922.tar.xz)
+Kernel, dtbs, modules and (kernel) firmware | 5.4.68.20200929 | [bcmrpi3-kernel-5.4.68.20200929.tar.xz](https://github.com/sakaki-/bcmrpi3-kernel/releases/download/5.4.68.20200929/bcmrpi3-kernel-5.4.68.20200929.tar.xz)
 
 The corresponding kernel configuration (derived via `make bcmrpi3_defconfig`) may be viewed [here](https://github.com/sakaki-/bcmrpi3-kernel/blob/master/config).
 
@@ -49,8 +49,8 @@ The corresponding kernel configuration (derived via `make bcmrpi3_defconfig`) ma
 To deploy (assuming that your RPi3's micro SD-card's first partition is mounted as `/boot`, and you are already running a 64-bit RPi3 image, such as my [gentoo-on-rpi3-64bit](https://github.com/sakaki-/gentoo-on-rpi3-64bit)) simply download, untar into the root directory, and reboot:
 ```console
 pi64 ~ # cp /boot/kernel8.img{,.old}
-pi64 ~ # wget -c https://github.com/sakaki-/bcmrpi3-kernel/releases/download/5.4.65.20200922/bcmrpi3-kernel-5.4.65.20200922.tar.xz
-pi64 ~ # tar -xJf bcmrpi3-kernel-5.4.65.20200922.tar.xz -C /
+pi64 ~ # wget -c https://github.com/sakaki-/bcmrpi3-kernel/releases/download/5.4.68.20200929/bcmrpi3-kernel-5.4.68.20200929.tar.xz
+pi64 ~ # tar -xJf bcmrpi3-kernel-5.4.68.20200929.tar.xz -C /
 pi64 ~ # sync && reboot
 ```
 
diff --git a/config b/config
index 421f781..2522dbf 100644
--- a/config
+++ b/config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm64 5.4.65 Kernel Configuration
+# Linux/arm64 5.4.68 Kernel Configuration
 #
 
 #
@@ -21,7 +21,7 @@ CONFIG_THREAD_INFO_IN_TASK=y
 #
 CONFIG_INIT_ENV_ARG_LIMIT=32
 # CONFIG_COMPILE_TEST is not set
-CONFIG_LOCALVERSION="-v8-0cb2a1174a38"
+CONFIG_LOCALVERSION="-v8-e655052ab35e"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_BUILD_SALT=""
 CONFIG_DEFAULT_HOSTNAME="(none)"
@@ -2766,7 +2766,7 @@ CONFIG_I2C_BCM2708_BAUDRATE=100000
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_BCM2835=m
-CONFIG_I2C_BRCMSTB=y
+# CONFIG_I2C_BRCMSTB is not set
 # CONFIG_I2C_CADENCE is not set
 # CONFIG_I2C_CBUS_GPIO is not set
 # CONFIG_I2C_DESIGNWARE_PLATFORM is not set