b034 5 port switch using KSZ8895
Status: Legacy, on hold untill the chips are availible.
b035 7 port gigabit switch using KSZ9477
Status: Legacy, abandoned untill the chips are availible again.
b042 7 port gigabit switch using KSZ9897
Status: Legacy, abandoned untill the chips are availible again.
b098 5 port gigabit switch with 5 (S/R/G)MII interfaces using SJA1105.
Status: Legacy, initial.
b039 gigabit SGMII cage.
Status: Legacy, review needed.
b095 osf.009 100BASE-T M12 connector.
Status: ordered
b009 1000BASE-T magnetics in phy to device configuration featuring WE7490220122.
Status: Legacy, potential problem with 009 pinning.
b060 1000BASE-T magnetics in extractor/injector configuration featuring WE7490220122.
Status: Legacy, ordered.
b116 1000BASE-T using PT61020
status ordered
b108 1Gbit PHY featuring ADIN1300
status in development.
b007 100Mbit PHY featuring LAN8742A
Status: Legacy, tested with b004.
b008 100Mbit PHY featuring KSZ8081RND
Status: Legacy, not finished.
b037 gigabit phy using KSZ9031
Status: Legacy, abandoned untill the chips are availible again.
b040 gigabit phy using DP83822
Status: Legacy, abandoned untill the chips are availible again.
b041 gigabit phy ad RMII master using DP83822
Status: Legacy, abandoned untill the chips are availible again.
b054 gigabit phy using DP83848
Status: Legacy, abandoned untill the chips are availible again.
b078 100Mbit MAC + PHY with SPI interface W5500
Status: ordered.
b108 gigabit PHY using ADIN1300BCPZ
status ordered
b011 PoE++ Rectifier using LT4321
status: Legacy, ordered, not tested.
b012 PoE Rectifier using MB10FTR
status: ordered
b029 PoE++ PSE using LTC4266
status: Legacy, initial.
b033 PoE PD with 3 Watt flyback DCDC using MP8007 and POE30P50. See also b093 for 7 Watt and b075 for 13 Watt.
Status: ordered
b076 PoE PD with flyback DCDC using SI3404
Status: Legacy, ordered.
b077 PoE PD buck DCDC using SI3404
Status: Legacy, incapable of large loads, being investigated.
b006 4 port USB hub featuring GL850G.
Status: Legacy, tested.
b094 7 port USB hub featuring USB2517.
Status: Legacy, ordered.
b082 4 port USB hub featuring USB2514B.
Status: Legacy, unfinished.
b017 USB to debug edge using FT2232
Status: Legacy, ordered.
b070 USB to debug V3MODS
Status: Legacy, ordered.
b021 USB to I2C host using FT260S
Status: Legacy, unfinished.
b022 USB to I2C device using FT201XS
Status: Legacy, ordered.
b139 USB to UART CP2102
Status ordered
b043 1wire to I2C bridge using DS28E18
Status: Legacy, ordered, not tested.
b044 1wire to SPI bridge using DS28E18
Status: Legacy, ordered, not tested.
b045 1wire to RJ45 connector
Status: Legacy, review needed.
b048 I2C 1wire master DS2484R
Status: Legacy, review needed.
b067 RS485 transceiver featuring MAX485.
status initial design.
b087 CAN controller with SPI interface featuring MCP2515
status Legacy, initial design.
b065 CAN FD controller with SPI interface featuring MCP2517FD
status Legacy, ordered.
b066 CAN FD transceiver featuring TJA1441
status Legacy, ordered.
b063 Isolated 5v-5v DCDC.
Status: Legacy, ordered.
b069 4.5V to 75V input 5A buck DCDC MIC28515.
Status: Legacy, ordered.
b068 6.5V to 28V input 5A buck DCDC AOZ2152EQI-28.
Status: Legacy, ordered.
b025 USB to 4x DCDC
Status: Legacy, tested.
b057 4.5V to 75V buck converter MAX17760 Output current 300ma
Status: Legacy, needs review.
b085 4.2V - 18V input 2A buck converter AP6220
Status: Legacy, ordered.
b113 4.5V - 40V to 3.3V 600ma buck using AP64060
status ordered
b002 features a TC1017 producing 3.3V output from a 5 volt input. Output current 200ma.
Status: ordered
b121 5V to 3.3V 2A LDO featuring LD39200PU.
status Ordered
b018 breakout of the RP2040 including flash memory.
Status: Legacy, b018v2.2rc missing I2C resistors, basic functionality otherwise tested
b019 breakout of the STM32F042.
Status: Legacy, finished but not ordered (or tested) because STM32F042 is out of stock.
b080 breakout of the STM32G030.
Status: Legacy, ordered.
b023 breakout of the STM23F723IE
Status: Legacy, outdated and probably dorment untill the chips are availible again.
b026 breakout of STM32F7 144 pin TQFP
Status: Legacy, outdated and probably dorment untill the chips are availible again.
b030 breakout of STM32F7 100 pin TQFP
Status: Legacy, outdated and probably dorment untill the chips are availible again.
b032 breakout of STM32F7 100 pin TFBGA
Status: Legacy, outdated and probably dorment untill the chips are availible again.
b028 STM32F042 with just one I2C connector.
Status: Legacy, abandoned.
b020 STM32F745 breakout.
Status: Legacy, abandoned untill the chip is availible again.
b053 STM32F107 64TQFP breakout.
Status: Legacy, abandoned untill the chip is availible again.
b090 STM32WL55 LoRa breakout.
Status: Legacy, initial.
It is common for boards which connect to a SOM to connect to multiple interfaces. Therefore it is advantagous to standardize the interface connector layout of SOMs such that connecting boards can connect at multiple points.
Using the standard 16mm distance between connectors the order of connected interfaces is: USB UART I2C SPI DebugEdge
b049 Raspberry Pi compute module 4 with isolated flyback PoE.
Status: Legacy, this board is essentially a composition of b076, b080 and a CM4. development of this is paused untill those are fully tested.
b071 Raspberry Pi compute module 4.
Status: Legacy, waiting for tests of b049.
b107 VAR-SOM breakout
status ordered
b013 ADS868x
status: Legacy, ordered, not tested.
b031 ADS8688 8X differential SPI ADC
status: Legacy, tested.
b059 ADS8168 8X differential SPI ADC 1MSPS
status: Legacy, review needed.
b056 ADS131M08 8X differential SPI ADC 32kSPS
status: ordered
b081 MCP3428 4X 16 bit differential I2C ADC with PGA 15SPS
status: ordered
b091 ADS131A04 4X differential SPI ADC 128kSPS
status: Legacy, initial.
b110 4x MUX PGA ADC using ADS1120
status ordered
b024 4x DAC with I2C interface using MCP4728.
Status: Legacy, ordered, not tested.
b036 I2C isolator featuring ADUM1251
Status: Legacy, ordered, not yet tested.
b055 SPI isolator and DCDC featuring ADUM5411
Status: Legacy, unfinished.
b064 SPI isolator and DCDC featuring ADUM5401
Status: Legacy, unfinished.
b062 SPI isolator featuring MAX14483
Status: Legacy, unfinished.
b046 I2C eeprom M24C02
Status: Legacy, test needed.
b079 SPI SD card
Status: Legacy, ordered.
b073 QSPI EEPROM
Status: Legacy, ordered.
b072 QSPI EEPROM W25Q
Status: Legacy, ordered.
b096 MAC address chip 11AA02E48 or 11AA02E64
Status: Legacy, initial.
b104 2 cell AA battery holder
status: ordered
b117 2 cell AAA battery holder
status in development
b105 2 cell NiMh charger featuring DS2711E
status: ordered
b089 3 axis accelerometer LIS3DHTR.
Status: Legacy, initial.
b015 MLX91205.
status: Legacy, not finished.
b047 HDC1080.
status: Legacy, review needed.
b092 TMCS110.
status: Legacy, initial.
b106 SPI thermocouple featuring MAX31855
status: v1.0 not ordered
b083 4x PT100 to I2C using MCP3428.
status: Legacy, ordered.
b088 temp humid SHT30-DIS.
status: Legacy, initial.
b050 analog preamp using LMV601
Status: Legacy, review needed.
b112 16x1 analog MUX using ADG706
status ordered
b109 8x2 analog MUX using ADG707
status ordered
b058 RTC MCP79410
Status: Legacy, review needed.
b061 40 pin pi 4 connector breakout
Status: Legacy, tested.
b097 GPIO to RGB-LED
Status: Legacy, initial.
b074 resistive power supply tester
Status: Legacy, initial.
b111 ck etoggle right angle switch E103MD1ABE
status ordered