Skip to content

Latest commit

 

History

History
953 lines (667 loc) · 46.9 KB

README.md

File metadata and controls

953 lines (667 loc) · 46.9 KB
Raw

Developing, Testing and Building Agones

Tooling for building and developing against Agones, with only dependencies being Make and Docker

Rather than installing all the dependencies locally, you can test and build Agones using the Docker image that is built from the Dockerfile in this directory. There is an accompanying Makefile for all the common tasks you may wish to accomplish.

Table of Contents

Building on Different Platforms

Linux

  • Install Make, either via apt install make or yum install make depending on platform.
  • Install Docker for your Linux platform.

Windows

Building and developing Agones requires you to use the Windows Subsystem for Linux(WSL), as this makes it easy to create a (relatively) cross platform development and build system.

  • Install WSL
  • Install Docker for Windows
  • Within WSL, Install Docker for Ubuntu
  • Follow this guide from "Configure WSL to Connect to Docker for Windows" forward for integrating the Docker on WSL with the Windows Docker installation
    • Note the binding of /c to /mnt/c (or drive of your choice) - this is very important!
  • Agones will need to be cloned somewhere on your /c (or drive of your choice) path, as that is what Docker will support mounts from
  • All interaction with Agones must be on the /c (or drive of your choice) path, otherwise Docker mounts will not work
  • Now the make commands can all be run from within your WSL shell
  • The Minikube setup on Windows has not been tested. Pull Requests would be appreciated!

macOS

  • Install Make, brew install make, if it's not installed already
  • Install Docker for Mac

Testing and Building

Make sure you are in the build directory to start.

First, let's test the Agones system code. To do this, run make test-go, which will execute all the unit tests for the Go codebase (there are other tests, but they can take a long time to run).

If you haven't run any of Make targets before then this will also create the Docker based build image, and then run the tests.

Building the build image may take a few minutes to download all the dependencies, so feel free to make cup of tea or coffee at this point. ☕️

Note: If you get build errors and you followed all the instructions so far, consult the Troubleshooting section

The build image is only created the first time one of the make targets is executed, and will only rebuild if the build Dockerfile has changed.

Assuming that the tests all pass, let's go ahead and compile the code and build the Docker images that Agones consists of.

To compile the Agones images, run make build-images. This is often all you need for Agones development.

If you want to compile and build everything (this can take a while), run make build, this will:

  • Compile the Agones Kubernetes integration code
  • Create the Docker images that we will later push
  • Build the local development tooling for all supported OS's
  • Compile and archive the SDKs in various languages

You may note that docker images, and tar archives are tagged with a concatenation of the upcoming release number and short git hash for the current commit. This has also been set in the code itself, so that it can be seen in via log statements.

Congratulations! You have now successfully tested and built Agones!

Running a Test Google Kubernetes Engine Cluster

This will setup a test GKE cluster on Google Cloud, with firewall rules set for each of the nodes for ports 7000-8000 to be open to UDP traffic.

First step is to create a Google Cloud Project at https://console.cloud.google.com or reuse an existing one.

The build tools (by default) maintain configuration for gcloud within the build folder, to keep everything separate (see below for overwriting these config locations). Therefore, once the project has been created, we will need to authenticate our gcloud tooling against it. To do that run make gcloud-init and fill in the prompts as directed.

Once authenticated, to create the test cluster, run make gcloud-test-cluster (or run make gcloud-e2e-test-cluster for end to end tests), which will use the Terraform configuration found in the build/terraform/gke directory.

You can customize the GKE cluster by appending the following parameters to your make target, via environment variables, or by setting them within your local-includes directory. For end to end tests, update GCP_CLUSTER_NAME to e2e-test-cluster in the Makefile.

See the table below for available customizations :

Parameter Description Default
GCP_CLUSTER_NAME The name of the cluster test-cluster
GCP_CLUSTER_ZONE or GCP_CLUSTER_LOCATION The name of the Google Compute Engine zone/location in which the cluster will resides us-west1-c
GCP_CLUSTER_NODEPOOL_AUTOSCALE Whether or not to enable autoscaling on game server nodepool false
GCP_CLUSTER_NODEPOOL_MIN_NODECOUNT The number of minimum nodes if autoscale is enabled 1
GCP_CLUSTER_NODEPOOL_MAX_NODECOUNT The number of maximum nodes if autoscale is enabled 5
GCP_CLUSTER_NODEPOOL_INITIALNODECOUNT The number of nodes to create in this cluster. 4
GCP_CLUSTER_NODEPOOL_MACHINETYPE The name of a Google Compute Engine machine type. e2-standard-4
GCP_CLUSTER_NODEPOOL_ENABLEIMAGESTREAMING Whether or not to enable image streaming for the "default" node pool in the cluster true
GCP_CLUSTER_NODEPOOL_WINDOWSINITIALNODECOUNT The number of Windows nodes to create in this cluster. 0
GCP_CLUSTER_NODEPOOL_WINDOWSMACHINETYPE The name of a Google Compute Engine machine type for Windows nodes. e2-standard-4

This will take several minutes to complete, but once done you can go to the Google Cloud Platform console and see that a cluster is up and running!

To grab the kubectl authentication details for this cluster, run make gcloud-auth-cluster, which will generate the required Kubernetes security credentials for kubectl. This will be stored in ~/.kube/config by default, but can also be overwritten by setting the KUBECONFIG environment variable before running the command.

Great! Now we are setup, let's try out the development shell, and see if our kubectl is working!

Run make shell to enter the development shell. You should see a bash shell that has you as the root user. Enter kubectl get pods and press enter. You should see that you have no resources currently, but otherwise see no errors. Assuming that all works, let's exit the shell by typing exit and hitting enter, and look at building, pushing and installing Agones next.

To prepare building and pushing images, let's set the REGISTRY environment variable to point to our new project. You can choose either Google Container Registry or Google Artifact Registry but you must set it explicitly. For this guidance, we will use Google Artifact Registry. You can choose any registry region but for this example, we'll just use us-docker.pkg.dev. Please follow the instructions to create the registry in your project properly before you contine.

In your shell, run export REGISTRY=us-docker.pkg.dev/<YOUR-PROJECT-ID>/<YOUR-REGISTRY-NAME> which will set the required REGISTRY parameters in our Make targets. Then, to rebuild our images for this registry, we run make build-images again.

Before we can push the images, there is one more small step! So that we can run regular docker push commands (rather than gcloud docker -- push), we have to authenticate against the registry, which will give us a short lived key for our local docker config. To do this, run make gcloud-auth-docker, and now we have the short lived tokens.

To push our images up at this point, is simple make push and that will push up all images you just built to your project's container registry.

Now that the images are pushed, to install the development version (with all imagePolicies set to always download), run make install and Agones will install the image that you just built and pushed on the test cluster you created at the beginning of this section. (if you want to see the resulting installation yaml, you can find it in build/.install.yaml)

Finally, to run all the end-to-end tests against your development version previously installed in your test cluster run make test-e2e (this can also take a while). This will validate the whole application flow from start to finish. If you're curious about how they work head to tests/e2e. Also see below for how to run individual end-to-end tests during development.

When you are finished, you can run make clean-gcloud-test-cluster (or make clean-gcloud-e2e-test-cluster) to tear down your cluster.

Running a Test Minikube cluster

This will setup a Minikube cluster, running on an agones profile,

Because Minikube runs on a virtualisation layer on the host (usually Docker), some of the standard build and development Make targets need to be replaced by Minikube specific targets.

First, install Minikube.

Next we will create the Agones Minikube cluster. Run make minikube-test-cluster to create the agones profile, and a Kubernetes cluster of the supported version under this profile.

This will also install the kubectl authentication credentials in ~/.kube, and set the kubectl context to agones.

Great! Now we are setup, let's try out the development shell, and see if our kubectl is working!

Run make minikube-shell to enter the development shell. You should see a bash shell that has you as the root user. Enter kubectl get pods and press enter. You should see that you have no resources currently, but otherwise see no errors. Assuming that all works, let's exit the shell by typing exit and hitting enter, and look at a building, pushing and installing Agones on Minikube next.

You may remember in the first part of this walkthrough, we ran make build-images, which created all the images and binaries we needed to work with Agones locally. We can push these images them straight into Minikube very easily!

Run make minikube-push which will send all of Agones's docker images from your local Docker into the Agones Minikube instance.

Now that the images are pushed, to install the development version, run make minikube-install and Agones will install the images that you built and pushed to the Agones Minikube instance (if you want to see the resulting installation yaml, you can find it in build/.install.yaml).

It's worth noting that Minikube does let you reuse its Docker daemon, and build directly on Minikube, but in this case this approach is far simpler, and makes cross-platform support for the build system much easier.

To push your own images into the cluster, take a look at Minikube's Pushing Images guide.

Running end-to-end tests on Minikube can be done via the make minikube-test-e2e target, but this can often overwhelm a local minikube cluster, so use at your own risk. Take a look at Running Individual End-to-End Tests to run individual tests on a case by case basis.

If you are getting issues connecting to GameServers running on minikube, check the Agones minikube documentation. You may need to change the driver version through the MINIKUBE_DRIVER variable. See the local-includes on how to change this permanently on your development machine.

Running a Test Kind cluster

This will setup a Kubernetes IN Docker cluster named agones by default.

Because Kind runs on a docker on the host, some of the standard build and development Make targets need to be replaced by kind specific targets.

First, install Kind.

Next we will create the Agones Kind cluster. Run make kind-test-cluster to create the agones Kubernetes cluster.

This will also setup helm and a kubeconfig, the kubeconfig location can found using the following command kind get kubeconfig-path --name=agones assuming you're using the default KIND_PROFILE.

You can verify that your new cluster information by running (if you don't have kubectl you can skip to the shell section):

KUBECONFIG=$(kind get kubeconfig-path --name=agones) kubectl cluster-info

Great! Now we are setup, we also provide a development shell with a handful set of tools like kubectl and helm.

Run make kind-shell to enter the development shell. You should see a bash shell that has you as the root user. Enter kubectl get pods and press enter. You should see that you have no resources currently, but otherwise see no errors. Assuming that all works, let's exit the shell by typing exit and hitting enter, and look at a building, pushing and installing Agones on Kind next.

You may remember in the first part of this walkthrough, we ran make build-images, which created all the images and binaries we needed to work with Agones locally. We can push these images them straight into kind very easily!

Run make kind-push which will send all of Agones's docker images from your local Docker into the Agones Kind container.

Now that the images are pushed, to install the development version, run make kind-install and Agones will install the images that you built and pushed to the Agones Kind cluster.

Running end-to-end tests on Kind is done via the make kind-test-e2e target. This target use the same make test-e2e but also setup some prerequisites for use with a Kind cluster.

If you are having performance issues, check out these docs here

Running a Custom Test Environment

This section is addressed to developers using a custom Kubernetes provider, a custom image repository and/or multiple test clusters.

Prerequisites:

  • a(some) running k8s cluster(s)
  • Have kubeconfig file(s) ready
  • docker must be logged into the image repository you're going to use

To begin, you need to set up the following environment variables:

  • KUBECONFIG should point to the kubeconfig file used to access the cluster; if unset, it defaults to ~/.kube/config
  • REGISTRY should point to your image repository of your choice (i.e. us-docker.pkg.dev//)
  • IMAGE_PULL_SECRET must contain the name of the secret required to pull the Agones images, in case you're using a custom repository; if unset, no pull secret will be used
  • IMAGE_PULL_SECRET_FILE must be initialized to the full path of the file containing the secret for pulling the Agones images, in case of a custom image repository; if set, make install will install this secret in both the agones-system (for pulling the controller image) and default (for pulling the sdk image) repositories

Now you're ready to begin the development/test cycle:

  • make build will build Agones
  • make test will run local tests, which includes site-test target
  • make push will push the Agones images to your image repository
  • make install will install/upgrade Agones into your cluster
  • make test-e2e will run end-to-end tests in your cluster

If you need to clean up your cluster, you can use make uninstall to remove Agones.

Common Development Flows

You can combine some of the above steps into a single one, for example make build-images push install is very common flow, to build you changes on Agones, push them to a container registry and install this development version to your cluster.

Another would be to run make lint test-go to run the golang linter against the Go code, and then run all the unit tests.

Set Local Make Targets and Variables with local-includes

If you want to permanently set Makefile variables or add targets to your local setup, all local-includes/*.mk are included into the main Makefile, and also ignored by the git repository.

Therefore, you can add your own .mk files in the local-includes directory without affecting the shared git repository.

For examaple, if I only worked with Linux images for Agones, I could permanently turn off Windows and Arm64 images, by writing a images.mk within that folder, with the following contents:

# Just Linux
WITH_WINDOWS=0
WITH_ARM64=0

Running Individual End-to-End Tests

When you are working on an individual feature of Agones, it doesn't make sense to run the entire end-to-end suite of tests (and it can take a really long time!).

The end-to-end tests within the tests/e2e folder are plain Go Tests that will use your local ~/.kube configuration to connect and run against the currently active local cluster.

This means you can run individual e2e tests from within your IDE or as a go command.

For example:

go test -race -run ^TestCreateConnect$

Troubleshooting

If you run into cluster connection issues, this can usually be resolved by running any kind of authenticated kubectl command from within make shell or locally, to refresh your authentication token.

Make Variable Reference

VERSION

The version of this build. Version defaults to the short hash of the latest commit.

REGISTRY

The registry that is being used to store docker images. It doesn't have default value and has to be set explicitly.

KUBECONFIG

The Kubernetes config file used to access the cluster. Defaults to ~/.kube/config - the file used by default by kubectl.

CLUSTER_NAME

The (gcloud) test cluster that is being worked against. Defaults to test-cluster.

GCP_PROJECT

Your GCP project for deploying GKE cluster. Defaults to gcloud default project settings.

GKE_PASSWORD

If specified basic authentication would be enabled for your cluster with username "admin". Empty string "" would disable basic authentication.

IMAGE_PULL_SECRET

The name of the secret required to pull the Agones images, if needed. If unset, no pull secret will be used.

IMAGE_PULL_SECRET_FILE

The full path of the file containing the secret for pulling the Agones images, in case it's needed.

If set, make install will install this secret in both the agones-system (for pulling the controller image) and default (for pulling the sdk image) repositories.

WITH_WINDOWS

Build Windows container images for Agones.

This option is enabled by default via implicit make WITH_WINDOWS=1 build-images. To disable, use make WITH_WINDOWS=0 build-images.

WINDOWS_VERSIONS

List of Windows Server versions to build for. Defaults to ltsc2019 for Windows Server 2019. See https://hub.docker.com/_/microsoft-windows-servercore for all available Windows versions.

WITH_ARM64

Build ARM64 container images for Agones

This option is enabled by default via implicit make WITH_ARM64=1 build-images. To disable, use make WITH_ARM64=0 build-images.

MINIKUBE_DRIVER

Which driver to use with a Minikube test cluster.

Defaults to "docker".

Make Target Reference

All targets will create the build image if it is not present.

Development Targets

Targets for developing with the build image.

make build

Build all the images required for Agones, as well as the SDKs

make build-images

Build all the images required for Agones

make build-sdks

Build all the sdks required for Agones

make build-sdk

Next command make build-sdk SDK_FOLDER=[SDK_TYPE] will build SDK of SDK_TYPE. For instance, in order to build the cpp sdk static and dynamic libraries (linux libraries only) use SDK_FOLDER=cpp

make run-sdk-command

Next command make run-sdk-command COMMAND=[COMMAND] SDK_FOLDER=[SDK_TYPE] will execute command for SDK_TYPE. For instance, in order to generate swagger codes when you change swagger.json definition, use make run-sdk-command COMMAND=gen SDK_FOLDER=restapi

make run-sdk-conformance-local

Run Agones sidecar which would wait for all requests from the SDK client. Note that annotation should contain UID and label should contain CreationTimestamp values to pass the test.

make run-sdk-conformance-no-build

Only run a conformance test for a specific Agones SDK.

make run-sdk-conformance-test

Build, run and clean conformance test for a specific Agones SDK.

make run-sdk-conformance-tests

Run SDK conformance test. Run SDK server (sidecar) in test mode (which would record all GRPC requests) versus all SDK test clients which should generate those requests. All methods are verified.

make clean-sdk-conformance-tests

Clean leftover binary and package files after running SDK conformance tests.

make test

Run the go tests, the sdk tests, the website tests and yaml tests.

make test-go

Run only the golang tests

make lint

Lint the Go code

make build-examples

Run make build for all examples subdirectories

make site-server

Generate https://agones.dev website locally and host on http://localhost:1313

make hugo-test

Check the links in a website

make site-test

Check the links in a website, includes test-gen-api-docs target

make site-images

Create all the site images from dot and puml diagrams in /site/static/diagrams

make gen-api-docs

Generate Agones CRD reference documentation Agones CRD API reference. Set feature shortcode with proper version automatically

make test-gen-api-docs

Verifies that there is no changes in generated Agones CRD API reference compared to the current one (useful for CI)

make push

Pushes all built images up to the $(REGISTRY)

make install

Installs the current development version of Agones into the Kubernetes cluster

make uninstall

Removes Agones from the Kubernetes cluster

make update-allocation-certs

Updates the Agones installation with the IP of the Allocation LoadBalancer, thereby creating a valid certificate for the Allocation gRPC endpoints.

The certificates are downloaded from the test kubernetes cluster and stored in ./build/allocation

make test-e2e

Runs end-to-end tests on the previously installed version of Agones. These tests validate Agones flow from start to finish.

It uses the KUBECONFIG to target a Kubernetes cluster.

Use GAMESERVERS_NAMESPACE flag to provide a namespace or leave it empty in order to create and use a random one.

See make minikube-test-e2e to run end-to-end tests on Minikube.

make test-e2e-integration

Runs integration portion of the end-to-end tests.

Pass flags to go test command using the ARGS parameter. For example, to run only the TestGameServerReserve test:

make test-e2e-integration ARGS='-run TestGameServerReserve'

make test-e2e-failure

Run controller failure portion of the end-to-end tests.

make test-e2e-allocator-crash

Run allocator failure portion of the end-to-end test.

make setup-prometheus

Install Prometheus server using Prometheus Community chart into the current cluster.

By default all exporters and alertmanager is disabled.

You can use this to collect Agones Metrics.

See make minikube-setup-prometheus and make kind-setup-prometheus to run the installation on Minikube or Kind.

make helm-repo-update

Run helm repo update to get the mose recent charts.

make setup-grafana

Install Grafana server using grafana community chart into the current cluster and setup Agones dashboards with Prometheus datasource.

You can set your own password using the PASSWORD environment variable.

See make minikube-setup-grafana and make kind-setup-grafana to run the installation on Minikube or Kind.

make setup-prometheus-stack

Install Prometheus-stack using Prometheus Community chart into the current cluster.

By default only prometheus and grafana will installed, all exporters and alertmanager is disabled.

You can use this to collect Agones Metrics using ServiceMonitor.

See make minikube-setup-prometheus-stack and make kind-setup-prometheus-stack to run the installation on Minikube or Kind.

make prometheus-portforward

Sets up port forwarding to the Prometheus deployment (port 9090 Prometheus UI).

On Windows and MacOS you will need to have installed kubectl.

See make minikube-prometheus-portforward and make kind-prometheus-portforward to run on Minikube or Kind.

make grafana-portforward

Sets up port forwarding to the grafana deployment (port 3000 UI).

On Windows and MacOS you will need to have installed kubectl.

See make minikube-grafana-portforward and make kind-grafana-portforward to run on Minikube or Kind.

make controller-portforward

Sets up port forwarding to a specified PORT var (defaults to 8080 for controller metrics) to the controller deployment.

make pprof-cpu-web

Start the web interface for pprof for cpu profiling.

make pprof-heap-web

Start the web interface for pprof for heap profiling.

make shell

Run a bash shell with the developer tools (go tooling, kubectl, etc) and source code in it.

make pkgsite

Run a container with pkgsite on port 8888

make build-controller-image

Compile the gameserver controller and then build the docker image

make build-agones-sdk-image

Compile the gameserver sidecar and then build the docker image

make build-ping-image

Compile the ping binary and then build the docker image

make gen-install

Generate the /install/yaml/install.yaml from the Helm template

make gen-embedded-openapi

Generate the embedded OpenAPI specs for existing Kubernetes Objects, such as PodTemplateSpec and ObjectMeta.

This should be run against a clean or brand new cluster, as external CRD's or schemas could cause errors to occur.

make gen-crd-client

Generate the Custom Resource Definition client(s)

make gen-allocation-grpc

Generate the allocator gRPC code

make gen-all-sdk-grpc

Generate the SDK gRPC server and client code for all SDKs.

make gen-sdk-grpc

Generate the SDK gRPC server and client code for a single SDK (specified in the SDK_FOLDER variable).

Build Image Targets

Targets for building the build image

make clean-config

Cleans the kubernetes and gcloud configurations

make clean-build-image

Deletes the local build docker image

make build-build-image

Creates the build docker image

Google Cloud Platform

A set of utilities for setting up a Kubernetes Engine cluster on Google Cloud Platform, since it's an easy way to get a test cluster working with Kubernetes.

make gcloud-init

Initialise the gcloud login and project configuration, if you are working with GCP.

make gcloud-test-cluster

Creates and authenticates a GKE cluster to work against.

make clean-gcloud-test-cluster

Delete a GKE cluster previously created with make gcloud-test-cluster.

make gcloud-auth-cluster

Pulls down authentication information for kubectl against a cluster, name can be specified through CLUSTER_NAME (defaults to 'test-cluster').

make gcloud-auth-docker

Creates a short lived access to Google Cloud container repositories, so that you are able to call docker push directly. Useful when used in combination with make push command.

Terraform

Utilities for deploying a Kubernetes Engine cluster on Google Cloud Platform using google Terraform provider.

make gcloud-terraform-cluster

Create GKE cluster and install release version of agones. Run next command to create GKE cluster with agones (version from helm repository):

[GKE_PASSWORD="<YOUR_PASSWORD>"] make gcloud-terraform-cluster

Where <YOUR_PASSWORD> should be at least 16 characters in length. You can omit GKE_PASSWORD and then basic auth would be disabled. Also you change ports="7000-8000" setting using tfvars file. Also you can define password password=<YOUR_PASSWORD> string in build/terraform.tfvars. Change AGONES_VERSION to a specific version you want to install.

make gcloud-terraform-install

Create GKE cluster and install current version of agones. The current version should be built and pushed to $(REGISTRY) beforehand:

make build-images
make push

make gcloud-terraform-destroy-cluster

Run terraform destroy on your cluster.

make terraform-clean

Remove .terraform directory with configs as well as tfstate files.

Minikube

A set of utilities for setting up and running a Minikube instance, for local development.

Since Minikube runs locally, there are some targets that need to be used instead of the standard ones above.

make minikube-test-cluster

Switches to an "agones" profile, and starts a kubernetes cluster of the right version. Uses "docker" as the default driver.

If needed, use MINIKUBE_DRIVER variable to change the VM driver.

make minikube-install

Installs the current development version of Agones into the Kubernetes cluster. Use this instead of make install, as it disables PullAlways on the install.yaml

make minikube-push

Push the local Agones Docker images that have already been built via make build or make build-images into the "agones" minikube instance with minikube cache add

make minikube-setup-prometheus

Installs prometheus metric backend into the Kubernetes cluster. Use this instead of make setup-prometheus, as it disables Persistent Volume Claim.

make minikube-setup-grafana

Installs grafana into the Kubernetes cluster. Use this instead of make setup-grafana, as it disables Persistent Volume Claim.

make minikube-setup-prometheus-stack

Installs prometheus-stack into the Kubernetes cluster. Use this instead of make setup-prometheus-stack, as it disables Persistent Volume Claim.

make minikube-prometheus-portforward

The minikube version of make prometheus-portforward to setup port forwarding to the prometheus deployment.

make minikube-grafana-portforward

The minikube version of make grafana-portforward to setup port forwarding to the grafana deployment.

make minikube-test-e2e

Runs end-to-end tests on the previously installed version of Agones. These tests validate Agones flow from start to finish.

⚠ Running all the e2e tests can often overwhelm a local minikube cluster, so use at your own risk. You should look at Running Individual End-to-End Tests to run tests on a case by case basis.

make minikube-shell

Connecting to Minikube requires so enhanced permissions, so use this target instead of make shell to start an interactive shell for development on Minikube.

make minikube-controller-portforward

The minikube version of make controller-portforward to setup port forwarding to the controller deployment.

Kind

Kind - kubernetes in docker is a tool for running local Kubernetes clusters using Docker container "nodes".

Since Kind runs locally, there are some targets that need to be used instead of the standard ones above.

make kind-test-cluster

Starts a local kubernetes cluster, you can delete it with make kind-delete-cluster

Use KIND_PROFILE variable to change the name of the cluster.

make kind-push

Push the local Agones Docker images that have already been built via make build or make build-images into the "agones" Kind cluster.

make kind-install

Installs the current development version of Agones into the Kubernetes cluster. Use this instead of make install, as it disables PullAlways on the install.yaml

make kind-setup-prometheus

Installs prometheus metric backend into the Kubernetes cluster. Use this instead of make setup-prometheus, as it disables Persistent Volume Claim.

make kind-setup-grafana

Installs grafana into the Kubernetes cluster. Use this instead of make setup-grafana, as it disables Persistent Volume Claim.

make kind-setup-prometheus-stack

Installs prometheus-stack into the Kubernetes cluster. Use this instead of make setup-prometheus-stack, as it disables Persistent Volume Claim.

make kind-prometheus-portforward

The kind version of make prometheus-portforward to setup port forwarding to the prometheus deployment.

make kind-grafana-portforward

The kind version of make grafana-portforward to setup port forwarding to the grafana deployment.

make kind-test-e2e

Runs end-to-end tests on the previously installed version of Agones. These tests validate Agones flow from start to finish.

make kind-shell

Connecting to Kind requires so enhanced permissions, so use this target instead of make shell to start an interactive shell for development on Kind.

make kind-controller-portforward

The Kind version of make controller-portforward to setup port forwarding to the controller deployment.

Dependencies

This project uses the go modules as its manager. You can see the list of dependencies here.

Vendoring

Agones uses module vendoring to reliably produce versioned builds with consistent behavior.

Adding a new dependency to Agones:

  • go mod tidy This will import your new deps into the go.mod file and trim out any removed dependencies.
  • go mod vendor Pulls module code into the vendor directory.

Sometimes the code added to vendor may not include a subdirectory that houses code being used but not as an import (protos passed as args to scripts is a good example). In this case you can go into the module cache and copy what you need to the path in vendor.

Here is an example for getting third_party from grpc-ecosystem/grpc-gateway v1.5.1 into vendor:

  • AGONES_PATH=/wherever/your/agones/path/is
  • cp -R $GOPATH/pkg/mod/github.com/grpc-ecosystem/[email protected]/third_party $AGONES_PATH/vendor/github.com/grpc-ecosystem/grpc-gateway/

Note the version in the pathname. Go may eliminate the need to do this in future versions.

We also use vendor to hold code patches while waiting for the project to release the fixes in their own code. An example is in k8s.io/apimachinery where a fix will be released later this year, but we updated our own vendored version in order to fix the issue sooner.

Troubleshooting

Frequent issues and possible solutions

$GOPATH/$GOROOT error when building in WSL

If you get this error when building Agones in WSL (make build, make test or any other related target):

       /usr/local/go/src/agones.dev/agones/cmd/controller (from $GOROOT)
       /go/src/agones.dev/agones/cmd/controller (from $GOPATH)
  • Are your project files on a different folder than C? If yes, then you should either move them on drive C or set up Docker for Windows to share your project drive as well
  • Did you set up the volume mount for Docker correctly? By default, drive C is mapped by WSL as /mnt/c, but Docker expects it as /c. You can test by executing ls /c in your linux shell. If you get an error, then follow the instructions for setting up volume mount for Docker

Error: cluster-admin-binding already exists

This surfaces while running make gcloud-auth-cluster. The solution is to run kubectl describe clusterrolebinding | grep cluster-admin-binding- -A10, find clusterrolebinding which belongs to your User account and then run kubectl delete clusterrolebindings cluster-admin-binding-<md5Hash> where <md5Hash> is a value specific to your account. Now you can execute make gcloud-auth-cluster again. If you run into a permission denied error when attempting the delete operation, you need to run sudo chown <your username> <path to .kube/config> to change ownership of the file to yourself.

Error: releases do not exist

Run make uninstall then run make install again.

I want to use pprof to profile the controller.

Run make build-images GO_BUILD_TAGS=profile and this will build images with pprof enabled in the controller, which you can then push and install on your cluster.

To get the pprof ui working, run make controller-portforward PORT=6060 (or minikube-controller-portforward PORT=6060 if you are on minikube), which will setup the port forwarding to the pprof http endpoint.

To view CPU profiling, run make pprof-cpu-web, which will start the web interface with a CPU usage graph on http://localhost:6061.

To view heap metrics, run make pprof-heap-web, which will start the web interface with a Heap usage graph. on http://localhost:6062.

Error: Kubernetes cluster unreachable: invalid configuration: no configuration has been provided

If you run into this error while creating a test cluster run make terraform-clean.

Error: project: required field is not set Error: Invalid value for network: project: required field is not set

Run make gcloud-init. If you still get the same error, log into the developer shell make shell and run gcloud init.

Error: could not download chart: failed to download "https://agones.dev/chart/stable/agones-1.28.0.tgz"

Run helm repo add agones https://agones.dev/chart/stable followed by helm repo update which will add the latest stable version of the agones tar file to your ~/.cache/helm/repository/.

Invalid argument "/agones-controller:1.29.0-961d8ae-amd64" for "-t, --tag" flag: invalid reference format

The $(REGISTRY) variable is not set in ~/agones/build/Makefile. For GKE follow instructions under Running a Test Google Kubernetes Engine Cluster for creating a registry and exporting the path to the registry.