diff --git a/README.md b/README.md
index c24fb54..7b8a694 100644
--- a/README.md
+++ b/README.md
@@ -1,3 +1,15 @@
 # Clockwork Card 208-5
 
 This is an extension card for the 208 that generates and distributes trigger sequences to the various submodules.
+
+Installation instructions:
+
+1. Download the latest firmware from triglavmodular.hu/208-cards/clockwork-card
+2. Download and install the Arduino IDE: https://www.arduino.cc/en/software
+3. Remove the card from the 208.
+4. Plug in the card to your computer with the USB-C port.
+5. Open the downloaded firmware project. (Clockwork_Code.ino)
+6. Select the USB port in the IDE in the top left corner. It will look something like "/dev.cu.usbserial-XXXXXXXX". Choose Arduino Nano for board if asked.
+7. Press upload in the top left corner and wait for the flashing to finish.
+8. Unplug the device from the USB port.
+9. You’re done.