Minimum noise multipler for img2img to 0

[HarrisTerry]

noise multiplier for im2img gets more photorealism if it can go all the way to 0 instead of 0.5, right now I do some f12 trick and change the script temporarily to min 0, using 0.2 makes the photos look more real but the current minimum is 0.5, this would be a wonderful tweak.

Thank you very much.

[therug]

I'd suggest changing the default values in ui-config.json, e.g.

    "img2img/CFG Scale/value": 6.0,
    "img2img/CFG Scale/minimum": 1.0,
    "img2img/CFG Scale/maximum": 30.0,
    "img2img/CFG Scale/step": 0.5,

[vladmandic]

aren't those already default values?
in modules/ui.py: cfg_scale = gr.Slider(minimum=1.0, maximum=30.0, step=0.5, label='CFG Scale', value=6.0, elem_id="img2img_cfg_scale")

ui-config.json is auto-created from actual ui components.

[therug]

Sorry, yes, my reply was directed at @SadisticLeprechaun—who could alter those values locally to match the values wished for, I thought.

[HarrisTerry]

From what someone showed me, the minimum used to be 0.5, but to adjust it below that I had to use F12, click the slider, change the min value in a script, and then could use it at 0.2. Works great though and many thanks! Didn't know there were other ways to achieve the setting.

…

On Tue, May 9, 2023 at 3:47 PM therug ***@***.***> wrote: Sorry, yes, my reply was directed at @SadisticLeprechaun <https://github.com/SadisticLeprechaun>—who could alter those values locally to match the values wished for. — Reply to this email directly, view it on GitHub <#802 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3EMWAZXYAJJ44BNELNZFDXFKNN5ANCNFSM6AAAAAAXY5JUXQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[OrganicBeej]

I'd suggest changing the default values in ui-config.json, e.g.

    "img2img/CFG Scale/value": 6.0,
    "img2img/CFG Scale/minimum": 1.0,
    "img2img/CFG Scale/maximum": 30.0,
    "img2img/CFG Scale/step": 0.5,

Hi I also wanted to edit this inside the ui-config.json file, I have done so but it doesn't seem to change it from 0.5 in 'Noise multiplier for img2img'?

Any advice appreciated :)

[HarrisTerry]

Mine goes as low as I want now :) I think this was fixed!

…

On Mon, Aug 7, 2023 at 11:05 AM OrganicBeej ***@***.***> wrote: I'd suggest changing the default values in ui-config.json, e.g. "img2img/CFG Scale/value": 6.0, "img2img/CFG Scale/minimum": 1.0, "img2img/CFG Scale/maximum": 30.0, "img2img/CFG Scale/step": 0.5, Hi I also wanted to edit this inside the ui-config.json file, I have done so but it doesn't seem to change it from 0.5 in 'Noise multiplier for img2img'? Any advice appreciated :) — Reply to this email directly, view it on GitHub <#802 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3EMWDV5JXR3EIW6QXQNG3XUD75FANCNFSM6AAAAAAXY5JUXQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>