Replies: 11 comments 6 replies
-
Hi, |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
It looks like there are two instances running! Please restart your server. |
Beta Was this translation helpful? Give feedback.
-
Thank you, i changed the ports a few times to try using different ports and after the Server crashed and rebooted, the Status is now "Idle". |
Beta Was this translation helpful? Give feedback.
-
It means your server is ready but no has has connected to it at the moment |
Beta Was this translation helpful? Give feedback.
-
I can't create an Access token because i don't have an Access Point, how do i get one? |
Beta Was this translation helpful? Give feedback.
-
just go to access point tab and create access point! let me know the error message |
Beta Was this translation helpful? Give feedback.
-
check this: https://github.com/vpnhood/VpnHood/wiki/Could-not-find-any-public-access-point-for-the-ServerFarm |
Beta Was this translation helpful? Give feedback.
-
So i need to open the port and forward it to the server? |
Beta Was this translation helpful? Give feedback.
-
you need to specify one of your public ip as publicInToken so access token can be generated. https://github.com/vpnhood/VpnHood/wiki/Could-not-find-any-public-access-point-for-the-ServerFarm I couldn't understand about forwarding! |
Beta Was this translation helpful? Give feedback.
-
If I specify an public IP-Address, it shows an error because it can not be assigned. Only the private IP of the server works. |
Beta Was this translation helpful? Give feedback.
-
Hi,
I want to setup a server with the Access Server.
In the Dashboard it says "Idle" and i cannot generate an Access Token because i need an Access Point.
How do I create one and what do I need to configure?
Thank You!
Beta Was this translation helpful? Give feedback.
All reactions