.travis.yml

# Copyright 2017 Xaptum, Inc.
#
#    Licensed under the Apache License, Version 2.0 (the "License");
#    you may not use this file except in compliance with the License.
#    You may obtain a copy of the License at
#
#        http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS,
#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#    See the License for the specific language governing permissions and
#    limitations under the License

language: c

compiler: gcc

dist: bionic

env:
  global:
    - INSTALL_PREFIX=${TRAVIS_BUILD_DIR}/usr
    - CMAKE_PREFIX_PATH=${INSTALL_PREFIX}
    - AMCL_DIR=${TRAVIS_BUILD_DIR}/amcl/install
    - TPM2_TSS_DIR=${TRAVIS_BUILD_DIR}/tpm2-tss/
    - IBM_TPM_DIR=${TRAVIS_BUILD_DIR}/ibm-tpm-simulator
    - ECDAA_CURVES=FP256BN,BN254,BN254CX,BLS383
    - ECDAA_BUILD_DIR=${TRAVIS_BUILD_DIR}/build
    - ECDAA_INSTALL_DIR=${TRAVIS_BUILD_DIR}/install
    - TPM_KEY_DIR=${ECDAA_BUILD_DIR}/test/tpm
    - SHARED_LIBS=ON
    - OUT_EXT_REPLACE=OFF

before_install:
  - sudo apt-get -y --no-install-recommends install autoconf-archive libgcrypt11-dev 
  - pip install --user cpp-coveralls

before_script:
  - .travis/install-amcl.sh ${AMCL_DIR} ${INSTALL_PREFIX} ${ECDAA_CURVES}
  - .travis/install-tpm2-tss.sh ${TPM2_TSS_DIR} ${INSTALL_PREFIX}
  - .travis/install-ibm-tpm2.sh ${IBM_TPM_DIR}
  - mkdir -p ${ECDAA_BUILD_DIR}
  - pushd ${ECDAA_BUILD_DIR}
  - cmake .. -DCMAKE_BUILD_TYPE=${BUILD_TYPE} -DCMAKE_INSTALL_PREFIX=${ECDAA_INSTALL_DIR} -DECDAA_CURVES=${ECDAA_CURVES} -DBUILD_SHARED_LIBS=${SHARED_LIBS} -DBUILD_EXAMPLES=ON -DTEST_USE_TCP_TPM=ON -DCMAKE_C_OUTPUT_EXTENSION_REPLACE=${OUT_EXT_REPLACE}
  - popd
script:
  - pushd ${ECDAA_BUILD_DIR}
  - cmake --build . --target install -- -j2
  - ${TRAVIS_BUILD_DIR}/.travis/build-against-installed.sh ${ECDAA_INSTALL_DIR} ${INSTALL_PREFIX} ${TRAVIS_BUILD_DIR}
  - ${TRAVIS_BUILD_DIR}/.travis/run-ibm-tpm2.sh ${IBM_TPM_DIR}
  - ${TRAVIS_BUILD_DIR}/.travis/prepare-tpm2.sh ${IBM_TPM_DIR} ${TPM_KEY_DIR}
  - ctest -VV
  - popd

matrix:
  include:
      - name: "Release build, gcc"
        env:
          - TYPE=RELEASE
          - BUILD_TYPE=Release
      - name: "Dev build, gcc"
        env:
          - TYPE=DEV
          - BUILD_TYPE=Dev
      - name: "Debug build, to get code coverage with gcov"
        env:
          - TYPE=DEBUG_WITH_COVERAGE
          - BUILD_TYPE=DebugWithCoverage
          - OUT_EXT_REPLACE=ON
        after_success:
          - coveralls --exclude examples --exclude amcl
      - name: "DevDebug build"
        env:
          - TYPE=DEVDEBUG
          - BUILD_TYPE=DevDebug
      - name: "Static lib build, gcc"
        env:
          - TYPE=RELEASE
          - BUILD_TYPE=Release
          - SHARED_LIBS=OFF
      - name: "Release build, clang"
        compiler: clang
        env:
          - TYPE=RELEASE-WITH-CLANG
          - BUILD_TYPE=Release
      - name: "CPPCheck"
        env:
          - TYPE=CPPCHECK
          - BUILD_TYPE=Release
        addons:
          apt:
            packages:
              - cppcheck
        before_script:
          - .travis/install-amcl.sh ${AMCL_DIR} ${INSTALL_PREFIX} ${ECDAA_CURVES}
          - .travis/install-tpm2-tss.sh ${TPM2_TSS_DIR} ${INSTALL_PREFIX}
          - mkdir -p ${ECDAA_BUILD_DIR}
          - pushd ${ECDAA_BUILD_DIR}
          - cmake .. -DCMAKE_BUILD_TYPE=Release -DXAPTUMTPM_LOCAL_DIR=${TPM2_TSS_DIR} -DCMAKE_INSTALL_PREFIX=${ECDAA_INSTALL_DIR} -DECDAA_CURVES=FP256BN
          - popd
        script:
          - pushd ${ECDAA_BUILD_DIR}
          - cmake --build . --target install -- -j2
          - popd
          - .travis/run-cppcheck.sh ${TRAVIS_BUILD_DIR} ${ECDAA_BUILD_DIR}
      - name: "MemCheck"
        env:
          - TYPE=MEMCHECK
          - BUILD_TYPE=RelWithDebInfo
        addons:
          apt:
            packages:
              - valgrind
        script:
          - pushd ${ECDAA_BUILD_DIR}
          - cmake --build . --target install -- -j2
          - ${TRAVIS_BUILD_DIR}/.travis/run-ibm-tpm2.sh ${IBM_TPM_DIR}
          - ${TRAVIS_BUILD_DIR}/.travis/prepare-tpm2.sh ${IBM_TPM_DIR} ${TPM_KEY_DIR}
          - ctest -VV -E benchmarks\|fuzz\|tool_test -T memcheck
          - ../test/valgrind-tool-test.sh ${ECDAA_BUILD_DIR}/tool
          - popd
        after_failure:
          - .travis/show-memcheck-results.sh ${TRAVIS_BUILD_DIR}
      - name: "Scan build"
        env:
          - TYPE=SCAN_BUILD
        before_script:
          - .travis/install-amcl.sh ${AMCL_DIR} ${INSTALL_PREFIX} ${ECDAA_CURVES}
          - .travis/install-tpm2-tss.sh ${TPM2_TSS_DIR} ${INSTALL_PREFIX}
        script:
          - .travis/run-scanbuild.sh ${TRAVIS_BUILD_DIR} ${ECDAA_BUILD_DIR}
      - name: "Sanitizers, gcc"
        sudo: true
        env:
          - TYPE=SANITIZE
          - BUILD_TYPE=RelWithSanitize
      - name: "Sanitizers, clang"
        sudo: true
        compiler: clang
        env:
          - TYPE=SANITIZE
          - BUILD_TYPE=RelWithSanitize
      - if: branch = coverity_scan
        name: "Coverity Scan"
        env: TYPE=COVERITY_SCAN
        env:
          - secure: "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"
        addons:
          coverity_scan:
            project:
              name: "xaptum/ecdaa"
              description: "A C implementation of elliptic-curve-based Direct Anonymous Attestation signatures"
            notification_email: ecdaa-coverity-reports@xaptum.com
            build_command: "cmake --build ${ECDAA_BUILD_DIR}"
            branch_pattern: coverity_scan

        before_install:
          - echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-
        script:
          - cat "${TRAVIS_BUILD_DIR}/cov-int/scm_log.txt"