From 0dd02ff72c6daf4e7800fb5dd1109fbacdde97dc Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Tue, 26 Apr 2022 23:41:05 +0300 Subject: [PATCH 01/67] floppy: disable FDRAWCMD by default commit 233087ca063686964a53c829d547c7571e3f67bf upstream. Minh Yuan reported a concurrency use-after-free issue in the floppy code between raw_cmd_ioctl and seek_interrupt. [ It turns out this has been around, and that others have reported the KASAN splats over the years, but Minh Yuan had a reproducer for it and so gets primary credit for reporting it for this fix - Linus ] The problem is, this driver tends to break very easily and nowadays, nobody is expected to use FDRAWCMD anyway since it was used to manipulate non-standard formats. The risk of breaking the driver is higher than the risk presented by this race, and accessing the device requires privileges anyway. Let's just add a config option to completely disable this ioctl and leave it disabled by default. Distros shouldn't use it, and only those running on antique hardware might need to enable it. Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/ Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com Reported-by: Minh Yuan Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com Reported-by: cruise k Reported-by: Kyungtae Kim Suggested-by: Linus Torvalds Tested-by: Denis Efremov Signed-off-by: Willy Tarreau Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- drivers/block/Kconfig | 16 ++++++++++++++++ drivers/block/floppy.c | 43 +++++++++++++++++++++++++++++++----------- 2 files changed, 48 insertions(+), 11 deletions(-) diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index b701c79f07e5..3d5cf588c078 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -33,6 +33,22 @@ config BLK_DEV_FD To compile this driver as a module, choose M here: the module will be called floppy. +config BLK_DEV_FD_RAWCMD + bool "Support for raw floppy disk commands (DEPRECATED)" + depends on BLK_DEV_FD + help + If you want to use actual physical floppies and expect to do + special low-level hardware accesses to them (access and use + non-standard formats, for example), then enable this. + + Note that the code enabled by this option is rarely used and + might be unstable or insecure, and distros should not enable it. + + Note: FDRAWCMD is deprecated and will be removed from the kernel + in the near future. + + If unsure, say N. + config AMIGA_FLOPPY tristate "Amiga floppy support" depends on AMIGA diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 7164be9710e5..cfe1bfb3c20e 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3016,6 +3016,8 @@ static const char *drive_name(int type, int drive) return "(null)"; } +#ifdef CONFIG_BLK_DEV_FD_RAWCMD + /* raw commands */ static void raw_cmd_done(int flag) { @@ -3227,6 +3229,35 @@ static int raw_cmd_ioctl(int cmd, void __user *param) return ret; } +static int floppy_raw_cmd_ioctl(int type, int drive, int cmd, + void __user *param) +{ + int ret; + + pr_warn_once("Note: FDRAWCMD is deprecated and will be removed from the kernel in the near future.\n"); + + if (type) + return -EINVAL; + if (lock_fdc(drive)) + return -EINTR; + set_floppy(drive); + ret = raw_cmd_ioctl(cmd, param); + if (ret == -EINTR) + return -EINTR; + process_fd_request(); + return ret; +} + +#else /* CONFIG_BLK_DEV_FD_RAWCMD */ + +static int floppy_raw_cmd_ioctl(int type, int drive, int cmd, + void __user *param) +{ + return -EOPNOTSUPP; +} + +#endif + static int invalidate_drive(struct block_device *bdev) { /* invalidate the buffer track to force a reread */ @@ -3414,7 +3445,6 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int { int drive = (long)bdev->bd_disk->private_data; int type = ITYPE(UDRS->fd_device); - int i; int ret; int size; union inparam { @@ -3565,16 +3595,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int outparam = UDRWE; break; case FDRAWCMD: - if (type) - return -EINVAL; - if (lock_fdc(drive)) - return -EINTR; - set_floppy(drive); - i = raw_cmd_ioctl(cmd, (void __user *)param); - if (i == -EINTR) - return -EINTR; - process_fd_request(); - return i; + return floppy_raw_cmd_ioctl(type, drive, cmd, (void __user *)param); case FDTWADDLE: if (lock_fdc(drive)) return -EINTR; From 08303170ab96990f2149d8923a17188fda7ad818 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 29 Apr 2022 11:19:38 +0200 Subject: [PATCH 02/67] Revert "net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link" This reverts commit edba120f094394454f5b9511d04abd7e8c2c31ee which is commit a6aaa00324240967272b451bfa772547bd576ee6 upstream. Pavel reports that it causes boot issues, so revert it for now. Link: https://lore.kernel.org/r/20220429074341.GB1423@amd Reported-by: Pavel Machek Cc: Dinh Nguyen Cc: David S. Miller Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 8 ++++++++ drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h | 4 ---- drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 13 ++++++++----- 3 files changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c index 6ca428a702f1..6a9c954492f2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c +++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c @@ -68,6 +68,10 @@ #define TSE_PCS_USE_SGMII_ENA BIT(0) #define TSE_PCS_IF_USE_SGMII 0x03 +#define SGMII_ADAPTER_CTRL_REG 0x00 +#define SGMII_ADAPTER_DISABLE 0x0001 +#define SGMII_ADAPTER_ENABLE 0x0000 + #define AUTONEGO_LINK_TIMER 20 static int tse_pcs_reset(void __iomem *base, struct tse_pcs *pcs) @@ -211,8 +215,12 @@ void tse_pcs_fix_mac_speed(struct tse_pcs *pcs, struct phy_device *phy_dev, unsigned int speed) { void __iomem *tse_pcs_base = pcs->tse_pcs_base; + void __iomem *sgmii_adapter_base = pcs->sgmii_adapter_base; u32 val; + writew(SGMII_ADAPTER_ENABLE, + sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); + pcs->autoneg = phy_dev->autoneg; if (phy_dev->autoneg == AUTONEG_ENABLE) { diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h index 254199f2efdb..2f5882450b06 100644 --- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h +++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h @@ -21,10 +21,6 @@ #include #include -#define SGMII_ADAPTER_CTRL_REG 0x00 -#define SGMII_ADAPTER_ENABLE 0x0000 -#define SGMII_ADAPTER_DISABLE 0x0001 - struct tse_pcs { struct device *dev; void __iomem *tse_pcs_base; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index b138968b8672..c3a78c113424 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -29,6 +29,9 @@ #include "altr_tse_pcs.h" +#define SGMII_ADAPTER_CTRL_REG 0x00 +#define SGMII_ADAPTER_DISABLE 0x0001 + #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 #define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2 @@ -62,14 +65,16 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed) { struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv; void __iomem *splitter_base = dwmac->splitter_base; + void __iomem *tse_pcs_base = dwmac->pcs.tse_pcs_base; void __iomem *sgmii_adapter_base = dwmac->pcs.sgmii_adapter_base; struct device *dev = dwmac->dev; struct net_device *ndev = dev_get_drvdata(dev); struct phy_device *phy_dev = ndev->phydev; u32 val; - writew(SGMII_ADAPTER_DISABLE, - sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); + if ((tse_pcs_base) && (sgmii_adapter_base)) + writew(SGMII_ADAPTER_DISABLE, + sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); if (splitter_base) { val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG); @@ -91,9 +96,7 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed) writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG); } - writew(SGMII_ADAPTER_ENABLE, - sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG); - if (phy_dev) + if (tse_pcs_base && sgmii_adapter_base) tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed); } From 08cf860b84ff15d405f62d6d23ba3b7d194abb2e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 29 Apr 2022 11:31:23 +0200 Subject: [PATCH 03/67] lightnvm: disable the subsystem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit 9ea9b9c48387 ("remove the lightnvm subsystem") the lightnvm subsystem was removed as there is no hardware in the wild for it, and the code is known to have problems. This should also be disabled for older LTS kernels as well to prevent anyone from accidentally using it. Cc: Christoph Hellwig Cc: Matias Bjørling Cc: Javier González Cc: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/lightnvm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/lightnvm/Kconfig b/drivers/lightnvm/Kconfig index 2f5d5f4a4c75..c2823d84cfa6 100644 --- a/drivers/lightnvm/Kconfig +++ b/drivers/lightnvm/Kconfig @@ -4,7 +4,7 @@ menuconfig NVM bool "Open-Channel SSD target support" - depends on BLOCK && HAS_DMA + depends on BLOCK && HAS_DMA && BROKEN help Say Y here to get to enable Open-channel SSDs. From d5a6f364182100ae29368ebb9cc38f84cf92c663 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Apr 2022 13:02:09 +0200 Subject: [PATCH 04/67] USB: quirks: add a Realtek card reader commit 2a7ccf6bb6f147f64c025ad68f4255d8e1e0ce6d upstream. This device is reported to stall when enummerated. Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 2ca6ed207e26..cd30939472fe 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -243,6 +243,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0b05, 0x17e0), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/ + { USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Realtek hub in Dell WD19 (Type-C) */ { USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME }, From 620d89406398169ca9cd4c3e4f3086b2faf22a28 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Apr 2022 14:31:52 +0200 Subject: [PATCH 05/67] USB: quirks: add STRING quirk for VCOM device commit ec547af8a9ea6441864bad34172676b5652ceb96 upstream. This has been reported to stall if queried Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index cd30939472fe..bba74e9b7da0 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -328,6 +328,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, + /* VCOM device */ + { USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, From e19a6f5843b7cb1c8c769b2f988fcb12e762d311 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 20 Apr 2022 17:12:34 -0700 Subject: [PATCH 06/67] USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS commit e23e50e7acc8d8f16498e9c129db33e6a00e80eb upstream. The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n due to "-mabi=apcs-gnu", even though it has a single u8: whiteheat_private { __u8 mcr; /* 0 1 */ /* size: 4, cachelines: 1, members: 1 */ /* padding: 3 */ /* last cacheline: 4 bytes */ }; The result is technically harmless, as both the source and the destinations are currently the same allocation size (4 bytes) and don't use their padding, but if anything were to ever be added after the "mcr" member in "struct whiteheat_private", it would be overwritten. The structs both have a single u8 "mcr" member, but are 4 bytes in padded size. The memcpy() destination was explicitly targeting the u8 member (size 1) with the length of the whole structure (size 4), triggering the memcpy buffer overflow warning: In file included from include/linux/string.h:253, from include/linux/bitmap.h:11, from include/linux/cpumask.h:12, from include/linux/smp.h:13, from include/linux/lockdep.h:14, from include/linux/spinlock.h:62, from include/linux/mmzone.h:8, from include/linux/gfp.h:6, from include/linux/slab.h:15, from drivers/usb/serial/whiteheat.c:17: In function 'fortify_memcpy_chk', inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4: include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 328 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Instead, just assign the one byte directly. Reported-by: kernel test robot Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/whiteheat.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 345211f1a491..1dd65019eea1 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -644,9 +644,8 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); - memcpy(&info->mcr, command_info->result_buffer, - sizeof(struct whiteheat_dr_info)); - break; + info->mcr = command_info->result_buffer[0]; + break; } } exit: From e6772bbb78084be1feafeb67c7f7b99fe9756445 Mon Sep 17 00:00:00 2001 From: Bruno Thomsen Date: Thu, 14 Apr 2022 10:12:02 +0200 Subject: [PATCH 07/67] USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader commit 35a923a0b329c343e9e81d79518e2937eba06fcd upstream. Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1. The two different product IDs allow detection of dongle antenna solution: - Internal antenna - External antenna using SMA connector https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader Signed-off-by: Bruno Thomsen Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ddee42e44a33..b0c98c61c53a 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -192,6 +192,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ + { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */ + { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ From 2d704136b4ae8ab9d317c767f09fd580c9e4280d Mon Sep 17 00:00:00 2001 From: Slark Xiao Date: Thu, 14 Apr 2022 15:44:34 +0800 Subject: [PATCH 08/67] USB: serial: option: add support for Cinterion MV32-WA/MV32-WB commit b4a64ed6e7b857317070fcb9d87ff5d4a73be3e8 upstream. Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is 0x00F1, and MV32-WB PID is 0x00F2. Test evidence as below: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f1 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F1 USB Mobile Broadband S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f2 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F2 USB Mobile Broadband S: SerialNumber=cdd06a78 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag GNSS port don't use serial driver. Signed-off-by: Slark Xiao Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c5d0d9e2bff2..efdd7f3a15c3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -430,6 +430,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_CLS8 0x00b0 #define CINTERION_PRODUCT_MV31_MBIM 0x00b3 #define CINTERION_PRODUCT_MV31_RMNET 0x00b7 +#define CINTERION_PRODUCT_MV32_WA 0x00f1 +#define CINTERION_PRODUCT_MV32_WB 0x00f2 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -1945,6 +1947,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(3)}, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff), .driver_info = RSVD(0)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff), + .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff), + .driver_info = RSVD(3)}, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), From e3a42f66c2c60116dfd3944067eedf274117027a Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Wed, 6 Apr 2022 16:14:08 +0200 Subject: [PATCH 09/67] USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions commit f32c5a0423400e01f4d7c607949fa3a1f006e8fa upstream. Add support for the following Telit FN980 and FN990 compositions: 0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty 0x1058: tty, adb, tty, tty, tty, tty, tty 0x1075: adb, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index efdd7f3a15c3..3fcf53e85adb 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1195,6 +1195,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1057, 0xff), /* Telit FN980 */ + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1058, 0xff), /* Telit FN980 (PCIe) */ + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff), /* Telit LN920 (rmnet) */ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff), /* Telit LN920 (MBIM) */ @@ -1211,6 +1215,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */ + .driver_info = RSVD(0) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), From 60eb65df83e165fdda319998fa7ce7853fa8646d Mon Sep 17 00:00:00 2001 From: Henry Lin Date: Fri, 8 Apr 2022 16:48:22 +0300 Subject: [PATCH 10/67] xhci: stop polling roothubs after shutdown commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream. While rebooting, XHCI controller and its bus device will be shut down in order by .shutdown callback. Stopping roothubs polling in xhci_shutdown() can prevent XHCI driver from accessing port status after its bus device shutdown. Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs polling, XHCI driver may access PCIe BAR register for port status after parent PCIe root port driver is shutdown and cause PCIe bus error. [check shared hcd exist before stopping its roothub polling -Mathias] Cc: stable@vger.kernel.org Signed-off-by: Henry Lin Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index a08369cb3462..ebf09503be39 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -746,6 +746,17 @@ void xhci_shutdown(struct usb_hcd *hcd) if (xhci->quirks & XHCI_SPURIOUS_REBOOT) usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + /* Don't poll the roothubs after shutdown. */ + xhci_dbg(xhci, "%s: stopping usb%d port polling.\n", + __func__, hcd->self.busnum); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + + if (xhci->shared_hcd) { + clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + del_timer_sync(&xhci->shared_hcd->rh_timer); + } + spin_lock_irq(&xhci->lock); xhci_halt(xhci); /* Workaround for spurious wakeups at shutdown with HSW */ From 48367c86ee227ced727d9a984887a6217a0f6b84 Mon Sep 17 00:00:00 2001 From: Zizhuang Deng Date: Thu, 10 Mar 2022 20:54:50 +0800 Subject: [PATCH 11/67] iio: dac: ad5592r: Fix the missing return value. commit b55b38f7cc12da3b9ef36e7a3b7f8f96737df4d5 upstream. The third call to `fwnode_property_read_u32` did not record the return value, resulting in `channel_offstate` possibly being assigned the wrong value. Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Signed-off-by: Zizhuang Deng Link: https://lore.kernel.org/r/20220310125450.4164164-1-sunsetdzz@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/dac/ad5592r-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c index 5c998ac8c840..126bb8349363 100644 --- a/drivers/iio/dac/ad5592r-base.c +++ b/drivers/iio/dac/ad5592r-base.c @@ -532,7 +532,7 @@ static int ad5592r_alloc_channels(struct ad5592r_state *st) if (!ret) st->channel_modes[reg] = tmp; - fwnode_property_read_u32(child, "adi,off-state", &tmp); + ret = fwnode_property_read_u32(child, "adi,off-state", &tmp); if (!ret) st->channel_offstate[reg] = tmp; } From d6144390fe47e7755c868c361aebbd088951ac72 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 6 Apr 2022 12:56:20 +0200 Subject: [PATCH 12/67] iio: dac: ad5446: Fix read_raw not returning set value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 89a01cd688d3c0ac983ef0b0e5f40018ab768317 upstream. read_raw should return the un-scaled value. Fixes: 5e06bdfb46e8b ("staging:iio:dac:ad5446: Return cached value for 'raw' attribute") Signed-off-by: Michael Hennerich Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20220406105620.1171340-1-michael.hennerich@analog.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/dac/ad5446.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c index d3a3d62869d8..86de972f41b1 100644 --- a/drivers/iio/dac/ad5446.c +++ b/drivers/iio/dac/ad5446.c @@ -171,7 +171,7 @@ static int ad5446_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: - *val = st->cached_val; + *val = st->cached_val >> chan->scan_type.shift; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = st->vref_mv; From cddbb17f303f0087fa7dbf10de9221a392c2f056 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Sat, 9 Apr 2022 11:48:49 +0800 Subject: [PATCH 13/67] iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on() commit 3a26787dacf04257a68b16315c984eb2c340bc5e upstream. When the driver fails to enable the regulator 'vid', we will get the following splat: [ 79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 79.967570] Call Trace: [ 79.967773] [ 79.967951] regulator_put+0x1f/0x30 [ 79.968254] devres_release_group+0x319/0x3d0 [ 79.968608] i2c_device_probe+0x766/0x940 Fix this by disabling the 'vdd' regulator when failing to enable 'vid' regulator. Signed-off-by: Zheyu Ma Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/magnetometer/ak8975.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 2a4e23e20ebc..a0787b1835e5 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -404,6 +404,7 @@ static int ak8975_power_on(const struct ak8975_data *data) if (ret) { dev_warn(&data->client->dev, "Failed to enable specified Vid supply\n"); + regulator_disable(data->vdd); return ret; } /* From 452bb6e27b021f560d05f04db23e241901f58783 Mon Sep 17 00:00:00 2001 From: Hangyu Hua Date: Thu, 7 Apr 2022 10:40:01 +0800 Subject: [PATCH 14/67] usb: misc: fix improper handling of refcount in uss720_probe() commit 0a96fa640dc928da9eaa46a22c46521b037b78ad upstream. usb_put_dev shouldn't be called when uss720_probe succeeds because of priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL before destroy_priv in uss720_disconnect because usb_put_dev is in destroy_priv. Fix this by moving priv->usbdev = NULL after usb_put_dev. Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe") Cc: stable Reviewed-by: Dongliang Mu Signed-off-by: Hangyu Hua Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/uss720.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 0ec6d76d1563..08517d475d46 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -87,6 +87,7 @@ static void destroy_priv(struct kref *kref) dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n"); usb_put_dev(priv->usbdev); + priv->usbdev = NULL; kfree(priv); } @@ -750,7 +751,6 @@ static int uss720_probe(struct usb_interface *intf, parport_announce_port(pp); usb_set_intfdata(intf, pp); - usb_put_dev(usbdev); return 0; probe_abort: @@ -770,7 +770,6 @@ static void uss720_disconnect(struct usb_interface *intf) if (pp) { priv = pp->private_data; usbdev = priv->usbdev; - priv->usbdev = NULL; priv->pp = NULL; dev_dbg(&intf->dev, "parport_remove_port\n"); parport_remove_port(pp); From 2cec43d95198a6c303e37eb2efbb1642cac60180 Mon Sep 17 00:00:00 2001 From: Dan Vacura Date: Thu, 31 Mar 2022 13:40:23 -0500 Subject: [PATCH 15/67] usb: gadget: uvc: Fix crash when encoding data for usb request commit 71d471e3faf90c9674cadc7605ac719e82cb7fac upstream. During the uvcg_video_pump() process, if an error occurs and uvcg_queue_cancel() is called, the buffer queue will be cleared out, but the current marker (queue->buf_used) of the active buffer (no longer active) is not reset. On the next iteration of uvcg_video_pump() the stale buf_used count will be used and the logic of min((unsigned int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a nbytes size, causing an invalid memory access. [80802.185460][ T315] configfs-gadget gadget: uvc: VS request completed with status -18. [80802.185519][ T315] configfs-gadget gadget: uvc: VS request completed with status -18. ... uvcg_queue_cancel() is called and the queue is cleared out, but the marker queue->buf_used is not reset. ... [80802.262328][ T8682] Unable to handle kernel paging request at virtual address ffffffc03af9f000 ... ... [80802.263138][ T8682] Call trace: [80802.263146][ T8682] __memcpy+0x12c/0x180 [80802.263155][ T8682] uvcg_video_pump+0xcc/0x1e0 [80802.263165][ T8682] process_one_work+0x2cc/0x568 [80802.263173][ T8682] worker_thread+0x28c/0x518 [80802.263181][ T8682] kthread+0x160/0x170 [80802.263188][ T8682] ret_from_fork+0x10/0x18 [80802.263198][ T8682] Code: a8c12829 a88130cb a8c130 Fixes: d692522577c0 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework") Cc: Signed-off-by: Dan Vacura Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/uvc_queue.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c index 6377e9fee6e5..dadf6e507380 100644 --- a/drivers/usb/gadget/function/uvc_queue.c +++ b/drivers/usb/gadget/function/uvc_queue.c @@ -246,6 +246,8 @@ void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect) buf->state = UVC_BUF_STATE_ERROR; vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR); } + queue->buf_used = 0; + /* This must be protected by the irqlock spinlock to avoid race * conditions between uvc_queue_buffer and the disconnection event that * could result in an interruptible wait in uvc_dequeue_buffer. Do not From 52ac86c4ecccda74b08b8d9bcfb78e78a02583db Mon Sep 17 00:00:00 2001 From: Vijayavardhan Vennapusa Date: Wed, 13 Apr 2022 16:10:38 -0500 Subject: [PATCH 16/67] usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() commit bf95c4d4630c7a2c16e7b424fdea5177d9ce0864 upstream. If any function like UVC is deactivating gadget as part of composition switch which results in not calling pullup enablement, it is not getting enabled after switch to new composition due to this deactivation flag not cleared. This results in USB enumeration not happening after switch to new USB composition. Hence clear deactivation flag inside gadget structure in configfs_composite_unbind() before switch to new USB composition. Signed-off-by: Vijayavardhan Vennapusa Signed-off-by: Dan Vacura Cc: stable Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/configfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index fe1b54a8fb0c..4653eeb10e0e 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1409,6 +1409,8 @@ static void configfs_composite_unbind(struct usb_gadget *gadget) usb_ep_autoconfig_reset(cdev->gadget); spin_lock_irqsave(&gi->spinlock, flags); cdev->gadget = NULL; + cdev->deactivations = 0; + gadget->deactivated = false; set_gadget_data(gadget, NULL); spin_unlock_irqrestore(&gi->spinlock, flags); } From 7895697ae287c6f80bc6c4655401ee432173daa6 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 18 Apr 2022 16:27:10 +0100 Subject: [PATCH 17/67] serial: 8250: Also set sticky MCR bits in console restoration commit 6e6eebdf5e2455f089ccd000754a0deaeb79af82 upstream. Sticky MCR bits are lost in console restoration if console suspending has been disabled. This currently affects the AFE bit, which works in combination with RTS which we set, so we want to make sure the UART retains control of its FIFO where previously requested. Also specific drivers may need other bits in the future. Signed-off-by: Maciej W. Rozycki Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend") Cc: stable@vger.kernel.org # v4.0+ Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 460c35b2b54d..2d83f1dfb4d6 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -3150,7 +3150,7 @@ static void serial8250_console_restore(struct uart_8250_port *up) serial8250_set_divisor(port, baud, quot, frac); serial_port_out(port, UART_LCR, up->lcr); - serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS); + serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS); } /* From ffff731dd2e33b3f2296d68c68d71a0ecd94ebeb Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 18 Apr 2022 16:27:16 +0100 Subject: [PATCH 18/67] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream. The EndRun PTP/1588 dual serial port device is based on the Oxford Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock. The clock rate is divided by the oversampling rate of 16 as it is supplied to the baud rate generator, yielding the baud base of 3906250. Replace the incorrect baud base of 4000000 with the right value of 3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct the clock for OxSemi PCIe devices"). Signed-off-by: Maciej W. Rozycki Cc: stable Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.") Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 3973bbd5ee55..a54dc0375ac6 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2915,7 +2915,7 @@ enum pci_board_num_t { pbn_panacom2, pbn_panacom4, pbn_plx_romulus, - pbn_endrun_2_4000000, + pbn_endrun_2_3906250, pbn_oxsemi, pbn_oxsemi_1_4000000, pbn_oxsemi_2_4000000, @@ -3479,10 +3479,10 @@ static struct pciserial_board pci_boards[] = { * signal now many ports are available * 2 port 952 Uart support */ - [pbn_endrun_2_4000000] = { + [pbn_endrun_2_3906250] = { .flags = FL_BASE0, .num_ports = 2, - .base_baud = 4000000, + .base_baud = 3906250, .uart_offset = 0x200, .first_offset = 0x1000, }, @@ -4430,7 +4430,7 @@ static struct pci_device_id serial_pci_tbl[] = { */ { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_endrun_2_4000000 }, + pbn_endrun_2_3906250 }, /* * Quatech cards. These actually have configurable clocks but for * now we just use the default. From 75a7b4fdd6eef35007c09a1aa874aa5c26a53dc3 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Mon, 25 Apr 2022 08:07:48 -0400 Subject: [PATCH 19/67] hex2bin: make the function hex_to_bin constant-time commit e5be15767e7e284351853cbaba80cde8620341fb upstream. The function hex2bin is used to load cryptographic keys into device mapper targets dm-crypt and dm-integrity. It should take constant time independent on the processed data, so that concurrently running unprivileged code can't infer any information about the keys via microarchitectural convert channels. This patch changes the function hex_to_bin so that it contains no branches and no memory accesses. Note that this shouldn't cause performance degradation because the size of the new function is the same as the size of the old function (on x86-64) - and the new function causes no branch misprediction penalties. I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64 i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32 sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64 powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are no branches in the generated code. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- include/linux/kernel.h | 2 +- lib/hexdump.c | 32 +++++++++++++++++++++++++------- 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d83fc669eeac..e77983309634 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -530,7 +530,7 @@ static inline char *hex_byte_pack_upper(char *buf, u8 byte) return buf; } -extern int hex_to_bin(char ch); +extern int hex_to_bin(unsigned char ch); extern int __must_check hex2bin(u8 *dst, const char *src, size_t count); extern char *bin2hex(char *dst, const void *src, size_t count); diff --git a/lib/hexdump.c b/lib/hexdump.c index 992457b1284c..5599bce534b1 100644 --- a/lib/hexdump.c +++ b/lib/hexdump.c @@ -24,15 +24,33 @@ EXPORT_SYMBOL(hex_asc_upper); * * hex_to_bin() converts one hex digit to its actual value or -1 in case of bad * input. + * + * This function is used to load cryptographic keys, so it is coded in such a + * way that there are no conditions or memory accesses that depend on data. + * + * Explanation of the logic: + * (ch - '9' - 1) is negative if ch <= '9' + * ('0' - 1 - ch) is negative if ch >= '0' + * we "and" these two values, so the result is negative if ch is in the range + * '0' ... '9' + * we are only interested in the sign, so we do a shift ">> 8"; note that right + * shift of a negative value is implementation-defined, so we cast the + * value to (unsigned) before the shift --- we have 0xffffff if ch is in + * the range '0' ... '9', 0 otherwise + * we "and" this value with (ch - '0' + 1) --- we have a value 1 ... 10 if ch is + * in the range '0' ... '9', 0 otherwise + * we add this value to -1 --- we have a value 0 ... 9 if ch is in the range '0' + * ... '9', -1 otherwise + * the next line is similar to the previous one, but we need to decode both + * uppercase and lowercase letters, so we use (ch & 0xdf), which converts + * lowercase to uppercase */ -int hex_to_bin(char ch) +int hex_to_bin(unsigned char ch) { - if ((ch >= '0') && (ch <= '9')) - return ch - '0'; - ch = tolower(ch); - if ((ch >= 'a') && (ch <= 'f')) - return ch - 'a' + 10; - return -1; + unsigned char cu = ch & 0xdf; + return -1 + + ((ch - '0' + 1) & (unsigned)((ch - '9' - 1) & ('0' - 1 - ch)) >> 8) + + ((cu - 'A' + 11) & (unsigned)((cu - 'F' - 1) & ('A' - 1 - cu)) >> 8); } EXPORT_SYMBOL(hex_to_bin); From c419dc1f6bbe529a7e02fa98831daf255f5f6f8a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 27 Apr 2022 11:26:40 -0400 Subject: [PATCH 20/67] hex2bin: fix access beyond string end commit e4d8a29997731b3bb14059024b24df9f784288d0 upstream. If we pass too short string to "hex2bin" (and the string size without the terminating NUL character is even), "hex2bin" reads one byte after the terminating NUL character. This patch fixes it. Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on error - so we can't just return the variable "hi" or "lo" on error. This inconsistency may be fixed in the next merge window, but for the purpose of fixing this bug, we just preserve the existing behavior and return -1 and -EINVAL. Signed-off-by: Mikulas Patocka Reviewed-by: Andy Shevchenko Fixes: b78049831ffe ("lib: add error checking to hex2bin") Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- lib/hexdump.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/lib/hexdump.c b/lib/hexdump.c index 5599bce534b1..570b23275704 100644 --- a/lib/hexdump.c +++ b/lib/hexdump.c @@ -65,10 +65,13 @@ EXPORT_SYMBOL(hex_to_bin); int hex2bin(u8 *dst, const char *src, size_t count) { while (count--) { - int hi = hex_to_bin(*src++); - int lo = hex_to_bin(*src++); + int hi, lo; - if ((hi < 0) || (lo < 0)) + hi = hex_to_bin(*src++); + if (unlikely(hi < 0)) + return -1; + lo = hex_to_bin(*src++); + if (unlikely(lo < 0)) return -1; *dst++ = (hi << 4) | lo; From bed0415e8f330fc2e9e326234a6532dcc7e8018e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 26 Mar 2022 12:14:55 -0300 Subject: [PATCH 21/67] ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue [ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ] On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec on the SoM is often not detected and the following error message is seen when the sgtl5000 driver tries to read the ID register: sgtl5000 1-000a: Error reading chip id -6 The reason for the error is that the MCLK clock is not provided early enough. Fix the problem by describing the MCLK pinctrl inside the codec node instead of placing it inside the audmux pinctrl group. With this change applied the sgtl5000 is always detected on every boot. Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM") Signed-off-by: Fabio Estevam Reviewed-by: Tim Harvey Acked-by: Max Krummenacher Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 99e323b57261..cbe7b0dcb6eb 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -324,6 +324,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; @@ -550,8 +552,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -812,6 +812,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 From c1283432976f38e2a59c483cb8d7f3ba9e5fbbbc Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Thu, 7 Apr 2022 11:18:56 +0200 Subject: [PATCH 22/67] phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe [ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Miaoqian Lin Reviewed-by: Krzysztof Kozlowski Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/phy/phy-exynos5250-sata.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/phy-exynos5250-sata.c index 60e13afcd9b8..7960c69d09a6 100644 --- a/drivers/phy/phy-exynos5250-sata.c +++ b/drivers/phy/phy-exynos5250-sata.c @@ -193,6 +193,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) return -EINVAL; sata_phy->client = of_find_i2c_device_by_node(node); + of_node_put(node); if (!sata_phy->client) return -EPROBE_DEFER; From c6281ad2d69ffe4ca36f5c174b7e92b2f9d37e9d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 7 Apr 2022 11:18:57 +0200 Subject: [PATCH 23/67] phy: samsung: exynos5250-sata: fix missing device put in probe error paths [ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ] The actions of of_find_i2c_device_by_node() in probe function should be reversed in error paths by putting the reference to obtained device. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alim Akhtar Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/phy/phy-exynos5250-sata.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/phy-exynos5250-sata.c index 7960c69d09a6..2c39d2fd3cd8 100644 --- a/drivers/phy/phy-exynos5250-sata.c +++ b/drivers/phy/phy-exynos5250-sata.c @@ -202,20 +202,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); if (IS_ERR(sata_phy->phyclk)) { dev_err(dev, "failed to get clk for PHY\n"); - return PTR_ERR(sata_phy->phyclk); + ret = PTR_ERR(sata_phy->phyclk); + goto put_dev; } ret = clk_prepare_enable(sata_phy->phyclk); if (ret < 0) { dev_err(dev, "failed to enable source clk\n"); - return ret; + goto put_dev; } sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops); if (IS_ERR(sata_phy->phy)) { - clk_disable_unprepare(sata_phy->phyclk); dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(sata_phy->phy); + ret = PTR_ERR(sata_phy->phy); + goto clk_disable; } phy_set_drvdata(sata_phy->phy, sata_phy); @@ -223,11 +224,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { - clk_disable_unprepare(sata_phy->phyclk); - return PTR_ERR(phy_provider); + ret = PTR_ERR(phy_provider); + goto clk_disable; } return 0; + +clk_disable: + clk_disable_unprepare(sata_phy->phyclk); +put_dev: + put_device(&sata_phy->client->dev); + + return ret; } static const struct of_device_id exynos_sata_phy_of_match[] = { From debae99ad138e5fcd306ac583e8ca2214486a99b Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Wed, 9 Mar 2022 10:43:01 +0000 Subject: [PATCH 24/67] ARM: OMAP2+: Fix refcount leak in omap_gic_of_init [ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ] The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build") Signed-off-by: Miaoqian Lin Message-Id: <20220309104302.18398-1-linmq006@gmail.com> Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- arch/arm/mach-omap2/omap4-common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index e5dcbda20129..7fff67ea7bcd 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -342,10 +342,12 @@ void __init omap_gic_of_init(void) np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); gic_dist_base_addr = of_iomap(np, 0); + of_node_put(np); WARN_ON(!gic_dist_base_addr); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); twd_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!twd_base); skip_errata_init: From 5872a75a3c54b66b0de93cd07001c05797eb3c27 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Tue, 8 Mar 2022 14:00:20 +0100 Subject: [PATCH 25/67] ARM: dts: Fix mmc order for omap3-gta04 [ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ] Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") introduces general mmc aliases. Let's tailor them to the need of the GTA04 board which does not make use of mmc2 and mmc3 interfaces. Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") Signed-off-by: H. Nikolaus Schaller Message-Id: Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- arch/arm/boot/dts/omap3-gta04.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 338ee6bd0e0c..ced298d07338 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -29,6 +29,8 @@ aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; }; gpio-keys { From 953345b8375b5a4f85f9fe210b652027d23177a4 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Tue, 12 Apr 2022 08:34:31 +0000 Subject: [PATCH 26/67] mtd: rawnand: Fix return value check of wait_for_completion_timeout [ Upstream commit 084c16ab423a8890121b902b405823bfec5b4365 ] wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case. Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty") Signed-off-by: Miaoqian Lin Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com Signed-off-by: Sasha Levin --- drivers/mtd/nand/sh_flctl.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 31f98acdba07..17e15bd05442 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -399,7 +399,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, dma_addr_t dma_addr; dma_cookie_t cookie; uint32_t reg; - int ret; + int ret = 0; + unsigned long time_left; if (dir == DMA_FROM_DEVICE) { chan = flctl->chan_fifo0_rx; @@ -440,13 +441,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, goto out; } - ret = + time_left = wait_for_completion_timeout(&flctl->dma_complete, msecs_to_jiffies(3000)); - if (ret <= 0) { + if (time_left == 0) { dmaengine_terminate_all(chan); dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n"); + ret = -ETIMEDOUT; } out: @@ -456,7 +458,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, dma_unmap_single(chan->device->dev, dma_addr, len, dir); - /* ret > 0 is success */ + /* ret == 0 is success */ return ret; } @@ -480,7 +482,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset) /* initiate DMA transfer */ if (flctl->chan_fifo0_rx && rlen >= 32 && - flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0) + !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE)) goto convert; /* DMA success */ /* do polling transfer */ @@ -539,7 +541,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen, /* initiate DMA transfer */ if (flctl->chan_fifo0_tx && rlen >= 32 && - flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0) + !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE)) return; /* DMA success */ /* do polling transfer */ From bc03249a5d2dab1e9def59c9f0be7053998e71d7 Mon Sep 17 00:00:00 2001 From: Lv Ruyi Date: Sun, 24 Apr 2022 03:14:30 +0000 Subject: [PATCH 27/67] pinctrl: pistachio: fix use of irq_of_parse_and_map() [ Upstream commit 0c9843a74a85224a89daa81fa66891dae2f930e1 ] The irq_of_parse_and_map() function returns 0 on failure, and does not return an negative value. Fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver") Reported-by: Zeal Robot Signed-off-by: Lv Ruyi Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- drivers/pinctrl/pinctrl-pistachio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c index b2b7e238bda9..fc8c57527fb7 100644 --- a/drivers/pinctrl/pinctrl-pistachio.c +++ b/drivers/pinctrl/pinctrl-pistachio.c @@ -1374,10 +1374,10 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl) } irq = irq_of_parse_and_map(child, 0); - if (irq < 0) { - dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq); + if (!irq) { + dev_err(pctl->dev, "No IRQ for bank %u\n", i); of_node_put(child); - ret = irq; + ret = -EINVAL; goto err; } From 1bdd46a8dce18ecdeead95af4f379dc9efa256b7 Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Thu, 21 Apr 2022 15:07:57 -0700 Subject: [PATCH 28/67] ip_gre: Make o_seqno start from 0 in native mode [ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ] For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye Acked-by: William Tu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ipv4/ip_gre.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index fe1801d9f059..eec225c637f0 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -339,14 +339,12 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev, __be16 proto) { struct ip_tunnel *tunnel = netdev_priv(dev); - - if (tunnel->parms.o_flags & TUNNEL_SEQ) - tunnel->o_seqno++; + __be16 flags = tunnel->parms.o_flags; /* Push GRE header. */ gre_build_header(skb, tunnel->tun_hlen, - tunnel->parms.o_flags, proto, tunnel->parms.o_key, - htonl(tunnel->o_seqno)); + flags, proto, tunnel->parms.o_key, + (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol); } From 5d31cc50162176f54ca20f2b8277308e35473da3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 24 Apr 2022 17:34:07 -0700 Subject: [PATCH 29/67] tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT [ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ] I had this bug sitting for too long in my pile, it is time to fix it. Thanks to Doug Porter for reminding me of it! We had various attempts in the past, including commit 0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"), but the issue is that TCP stack currently only generates EPOLLOUT from input path, when tp->snd_una has advanced and skb(s) cleaned from rtx queue. If a flow has a big RTT, and/or receives SACKs, it is possible that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0 and no more data can be sent until tp->snd_una finally advances. What is needed is to also check if POLLOUT needs to be generated whenever tp->snd_nxt is advanced, from output path. This bug triggers more often after an idle period, as we do not receive ACK for at least one RTT. tcp_notsent_lowat could be a fraction of what CWND and pacing rate would allow to send during this RTT. In a followup patch, I will remove the bogus call to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED) from tcp_check_space(). Fact that we have decided to generate an EPOLLOUT does not mean the application has immediately refilled the transmit queue. This optimistic call might have been the reason the bug seemed not too serious. Tested: 200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2] $ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat $ cat bench_rr.sh SUM=0 for i in {1..10} do V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"` echo $V SUM=$(($SUM + $V)) done echo SUM=$SUM Before patch: $ bench_rr.sh 130000000 80000000 140000000 140000000 140000000 140000000 130000000 40000000 90000000 110000000 SUM=1140000000 After patch: $ bench_rr.sh 430000000 590000000 530000000 450000000 450000000 350000000 450000000 490000000 480000000 460000000 SUM=4680000000 # This is 410 % of the value before patch. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet Reported-by: Doug Porter Cc: Soheil Hassas Yeganeh Cc: Neal Cardwell Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- include/net/tcp.h | 1 + net/ipv4/tcp_input.c | 12 +++++++++++- net/ipv4/tcp_output.c | 1 + 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index f26f075250b4..97df2f6fcbd7 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -579,6 +579,7 @@ void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req); void tcp_reset(struct sock *sk); void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb); void tcp_fin(struct sock *sk); +void tcp_check_space(struct sock *sk); /* tcp_timer.c */ void tcp_init_xmit_timers(struct sock *); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 01c73775ed00..7f48f8504284 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5159,7 +5159,17 @@ static void tcp_new_space(struct sock *sk) sk->sk_write_space(sk); } -static void tcp_check_space(struct sock *sk) +/* Caller made space either from: + * 1) Freeing skbs in rtx queues (after tp->snd_una has advanced) + * 2) Sent skbs from output queue (and thus advancing tp->snd_nxt) + * + * We might be able to generate EPOLLOUT to the application if: + * 1) Space consumed in output/rtx queues is below sk->sk_sndbuf/2 + * 2) notsent amount (tp->write_seq - tp->snd_nxt) became + * small enough that tcp_stream_memory_free() decides it + * is time to generate EPOLLOUT. + */ +void tcp_check_space(struct sock *sk) { if (sock_flag(sk, SOCK_QUEUE_SHRUNK)) { sock_reset_flag(sk, SOCK_QUEUE_SHRUNK); diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index aafea53c7c06..95b0f486cb10 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -83,6 +83,7 @@ static void tcp_event_new_data_sent(struct sock *sk, const struct sk_buff *skb) NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPORIGDATASENT, tcp_skb_pcount(skb)); + tcp_check_space(sk); } /* SND.NXT, if window was not shrunk. From 7361ca9c00529437b2d31522728e7a0ecb5396ad Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 21 Apr 2022 16:35:49 +0200 Subject: [PATCH 30/67] bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() [ Upstream commit fff8c10368e64e7f8960f149375c12ca5f3b30af ] This code is really spurious. It always returns an ERR_PTR, even when err is known to be 0 and calls put_device() after a successful device_register() call. It is likely that the return statement in the normal path is missing. Add 'return rdev;' to fix it. Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Christophe JAILLET Reviewed-by: Samuel Holland Tested-by: Samuel Holland Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin --- drivers/bus/sunxi-rsb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 4f3d988210b0..ce5b976a8856 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -224,6 +224,8 @@ static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb, dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev)); + return rdev; + err_device_add: put_device(&rdev->dev); From 7f63d978b11bef064ee00c5a149eb62d4ea63dc5 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 21 Apr 2022 21:43:08 +0800 Subject: [PATCH 31/67] clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() [ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by: Yang Yingliang Reviewed-by: Samuel Holland Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin --- drivers/clk/sunxi/clk-sun9i-mmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c index f69f9e8c6f38..7e9d1624032f 100644 --- a/drivers/clk/sunxi/clk-sun9i-mmc.c +++ b/drivers/clk/sunxi/clk-sun9i-mmc.c @@ -117,6 +117,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev) spin_lock_init(&data->lock); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -EINVAL; /* one clock/reset pair per word */ count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH); data->membase = devm_ioremap_resource(&pdev->dev, r); From b4824b5279a47be10299fa61eddc3eb8127ab84e Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Tue, 26 Apr 2022 08:39:13 -0700 Subject: [PATCH 32/67] bnx2x: fix napi API usage sequence [ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34081f1 ("bnx2x: AER revised") Reported-by: David Christensen Tested-by: David Christensen Signed-off-by: Manish Chopra Signed-off-by: Ariel Elior Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 8d17d464c067..398928642a97 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -14314,10 +14314,6 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) /* Stop Tx */ bnx2x_tx_disable(bp); - /* Delete all NAPI objects */ - bnx2x_del_all_napi(bp); - if (CNIC_LOADED(bp)) - bnx2x_del_all_napi_cnic(bp); netdev_reset_tc(bp->dev); del_timer_sync(&bp->timer); @@ -14422,6 +14418,11 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev) bnx2x_drain_tx_queues(bp); bnx2x_send_unload_req(bp, UNLOAD_RECOVERY); bnx2x_netif_stop(bp, 1); + bnx2x_del_all_napi(bp); + + if (CNIC_LOADED(bp)) + bnx2x_del_all_napi_cnic(bp); + bnx2x_free_irq(bp); /* Report UNLOAD_DONE to MCP */ From 54c8624324a0b3ead1f7c678da00b0b6def82860 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Tue, 5 Apr 2022 20:10:38 +0800 Subject: [PATCH 33/67] ASoC: wm8731: Disable the regulator when probing fails [ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ] When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init(). The following log reveals it: [ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130 Signed-off-by: Zheyu Ma Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/wm8731.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 4f9a1eb28120..abe5e77ba171 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -604,7 +604,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731) ret = wm8731_reset(wm8731->regmap); if (ret < 0) { dev_err(dev, "Failed to issue reset: %d\n", ret); - goto err_regulator_enable; + goto err; } /* Clear POWEROFF, keep everything else disabled */ @@ -621,10 +621,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731) regcache_mark_dirty(wm8731->regmap); -err_regulator_enable: - /* Regulators will be enabled by bias management */ - regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); - +err: return ret; } @@ -768,21 +765,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(wm8731->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); - return ret; + goto err_regulator_enable; } ret = wm8731_hw_init(&i2c->dev, wm8731); if (ret != 0) - return ret; + goto err_regulator_enable; ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8731, &wm8731_dai, 1); if (ret != 0) { dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); - return ret; + goto err_regulator_enable; } return 0; + +err_regulator_enable: + /* Regulators will be enabled by bias management */ + regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); + + return ret; } static int wm8731_i2c_remove(struct i2c_client *client) From b3daf0927d6d27d5fa135801f25dba6c7e3159d8 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Sun, 17 Apr 2022 20:55:19 +0800 Subject: [PATCH 34/67] drivers: net: hippi: Fix deadlock in rr_close() [ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ] There is a deadlock in rr_close(), which is shown below: (Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- drivers/net/hippi/rrunner.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 6f3519123eb6..0e1a422d9567 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -1354,7 +1354,9 @@ static int rr_close(struct net_device *dev) rrpriv->fw_running = 0; + spin_unlock_irqrestore(&rrpriv->lock, flags); del_timer_sync(&rrpriv->timer); + spin_lock_irqsave(&rrpriv->lock, flags); writel(0, ®s->TxPi); writel(0, ®s->IpRxPi); From c421e3a8e90cc408b4455f81a043d759a62a3265 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 19 Apr 2022 09:52:41 -0700 Subject: [PATCH 35/67] x86/cpu: Load microcode during restore_processor_state() commit f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream. When resuming from system sleep state, restore_processor_state() restores the boot CPU MSRs. These MSRs could be emulated by microcode. If microcode is not loaded yet, writing to emulated MSRs leads to unchecked MSR access error: ... PM: Calling lapic_suspend+0x0/0x210 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr) Call Trace: ? restore_processor_state x86_acpi_suspend_lowlevel acpi_suspend_enter suspend_devices_and_enter pm_suspend.cold state_store kobj_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write __x64_sys_write do_syscall_64 entry_SYSCALL_64_after_hwframe RIP: 0033:0x7fda13c260a7 To ensure microcode emulated MSRs are available for restoration, load the microcode on the boot CPU before restoring these MSRs. [ Pawan: write commit message and productize it. ] Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume") Reported-by: Kyle D. Pelton Signed-off-by: Borislav Petkov Signed-off-by: Pawan Gupta Tested-by: Kyle D. Pelton Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841 Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/microcode.h | 2 ++ arch/x86/kernel/cpu/microcode/core.c | 6 +++--- arch/x86/power/cpu.c | 8 ++++++++ 3 files changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index da0d81fa0b54..0e50b668184a 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -135,10 +135,12 @@ extern void __init load_ucode_bsp(void); extern void load_ucode_ap(void); void reload_early_microcode(void); extern bool get_builtin_firmware(struct cpio_data *cd, const char *name); +void microcode_bsp_resume(void); #else static inline void __init load_ucode_bsp(void) { } static inline void load_ucode_ap(void) { } static inline void reload_early_microcode(void) { } +static inline void microcode_bsp_resume(void) { } static inline bool get_builtin_firmware(struct cpio_data *cd, const char *name) { return false; } #endif diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c index b53a6579767d..499bc79fc82a 100644 --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -586,9 +586,9 @@ static struct subsys_interface mc_cpu_interface = { }; /** - * mc_bp_resume - Update boot CPU microcode during resume. + * microcode_bsp_resume - Update boot CPU microcode during resume. */ -static void mc_bp_resume(void) +void microcode_bsp_resume(void) { int cpu = smp_processor_id(); struct ucode_cpu_info *uci = ucode_cpu_info + cpu; @@ -600,7 +600,7 @@ static void mc_bp_resume(void) } static struct syscore_ops mc_syscore_ops = { - .resume = mc_bp_resume, + .resume = microcode_bsp_resume, }; static int mc_cpu_online(unsigned int cpu) diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 357b3e6a2f7b..a1fbf18eed5a 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -26,6 +26,7 @@ #include #include #include +#include #ifdef CONFIG_X86_32 __visible unsigned long saved_context_ebx; @@ -261,6 +262,13 @@ static void notrace __restore_processor_state(struct saved_context *ctxt) x86_platform.restore_sched_clock_state(); mtrr_bp_restore(); perf_restore_debug_store(); + + microcode_bsp_resume(); + + /* + * This needs to happen after the microcode has been updated upon resume + * because some of the MSRs are "emulated" in microcode. + */ msr_restore_context(ctxt); } From 478574e54f79c29cc25bf90c8e980075e1f07cf7 Mon Sep 17 00:00:00 2001 From: Daniel Starke Date: Thu, 14 Apr 2022 02:42:10 -0700 Subject: [PATCH 36/67] tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2 commit 06d5afd4d640eea67f5623e76cd5fc03359b7f3c upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in convergence layer type 2 can be either one or two bytes. The length is encoded in the EA bit. This is set 1 for the last byte in the sequence. gsmtty_modem_update() handles this correctly but gsm_dlci_data_output() fails to set EA to 1. There is no case in which we encode two signal octets as there is no case in which we send out a break signal. Therefore, always set the EA bit to 1 for the signal octet to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 2311f8a635a6..9c5561588174 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -839,7 +839,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) break; case 2: /* Unstructed with modem bits. Always one byte as we never send inline break data */ - *dp++ = gsm_encode_modem(dlci); + *dp++ = (gsm_encode_modem(dlci) << 1) | EA; break; } WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len); From 02d2f29e83b4428186518a57ec74fc63b83a9814 Mon Sep 17 00:00:00 2001 From: Daniel Starke Date: Thu, 14 Apr 2022 02:42:12 -0700 Subject: [PATCH 37/67] tty: n_gsm: fix malformed counter for out of frame data commit a24b4b2f660b7ddf3f484b37600bba382cb28a9d upstream. The gsm_mux field 'malformed' represents the number of malformed frames received. However, gsm1_receive() also increases this counter for any out of frame byte. Fix this by ignoring out of frame data for the malformed counter. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 9c5561588174..5a92c51aaf63 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1977,7 +1977,8 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c) } /* Any partial frame was a runt so go back to start */ if (gsm->state != GSM_START) { - gsm->malformed++; + if (gsm->state != GSM_SEARCH) + gsm->malformed++; gsm->state = GSM_START; } /* A SOF in GSM_START means we are still reading idling or From 5b3417b60e43ff03a96f533ee374da13f17b4840 Mon Sep 17 00:00:00 2001 From: Daniel Starke Date: Thu, 14 Apr 2022 02:42:13 -0700 Subject: [PATCH 38/67] tty: n_gsm: fix insufficient txframe size commit 535bf600de75a859698892ee873521a48d289ec1 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size (N1) refers to the length of the information field (i.e. user payload). However, 'txframe' stores the whole frame including frame header, checksum and start/end flags. We also need to consider the byte stuffing overhead. Define constant for the protocol overhead and adjust the 'txframe' size calculation accordingly to reserve enough space for a complete mux frame including byte stuffing for advanced option mode. Note that no byte stuffing is applied to the start and end flag. Also use MAX_MTU instead of MAX_MRU as this buffer is used for data transmission. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 5a92c51aaf63..48400408c5c9 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -84,6 +84,8 @@ module_param(debug, int, 0600); */ #define MAX_MRU 1500 #define MAX_MTU 1500 +/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */ +#define PROT_OVERHEAD 7 #define GSM_NET_TX_TIMEOUT (HZ*10) /** @@ -2199,7 +2201,7 @@ static struct gsm_mux *gsm_alloc_mux(void) kfree(gsm); return NULL; } - gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL); + gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL); if (gsm->txframe == NULL) { kfree(gsm->buf); kfree(gsm); From 5a503b98d09c3f96cc6644d639b0c012745b6500 Mon Sep 17 00:00:00 2001 From: Daniel Starke Date: Thu, 14 Apr 2022 02:42:15 -0700 Subject: [PATCH 39/67] tty: n_gsm: fix missing explicit ldisc flush commit 17eac652028501df7ea296b1d9b9c134db262b7d upstream. In gsm_cleanup_mux() the muxer is closed down and all queues are removed. However, removing the queues is done without explicit control of the underlying buffers. Flush those before freeing up our queues to ensure that all outgoing queues are cleared consistently. Otherwise, a new mux connection establishment attempt may time out while the underlying tty is still busy sending out the remaining data from the previous connection. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 48400408c5c9..f02fe9a6593a 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2101,6 +2101,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm) gsm_dlci_release(gsm->dlci[i]); mutex_unlock(&gsm->mutex); /* Now wipe the queues */ + tty_ldisc_flush(gsm->tty); list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list) kfree(txq); INIT_LIST_HEAD(&gsm->tx_list); From d194fae22b248f92fef85e7372f7f58d262f5b34 Mon Sep 17 00:00:00 2001 From: Daniel Starke Date: Thu, 14 Apr 2022 02:42:16 -0700 Subject: [PATCH 40/67] tty: n_gsm: fix wrong command retry handling commit d0bcdffcad5a22f202e3bf37190c0dd8c080ea92 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.3 states that the valid range for the maximum number of retransmissions (N2) is from 0 to 255 (both including). gsm_config() fails to limit this range correctly. Furthermore, gsm_control_retransmit() handles this number incorrectly by performing N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255 retransmission attempts. Fix the range check in gsm_config() and the value handling in gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index f02fe9a6593a..16547a50fedd 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1345,7 +1345,6 @@ static void gsm_control_retransmit(unsigned long data) spin_lock_irqsave(&gsm->control_lock, flags); ctrl = gsm->pending_cmd; if (ctrl) { - gsm->cretries--; if (gsm->cretries == 0) { gsm->pending_cmd = NULL; ctrl->error = -ETIMEDOUT; @@ -1354,6 +1353,7 @@ static void gsm_control_retransmit(unsigned long data) wake_up(&gsm->event); return; } + gsm->cretries--; gsm_control_transmit(gsm, ctrl); mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100); } @@ -1394,7 +1394,7 @@ static struct gsm_control *gsm_control_send(struct gsm_mux *gsm, /* If DLCI0 is in ADM mode skip retries, it won't respond */ if (gsm->dlci[0]->mode == DLCI_MODE_ADM) - gsm->cretries = 1; + gsm->cretries = 0; else gsm->cretries = gsm->n2; @@ -2519,7 +2519,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm, /* Check the MRU/MTU range looks sane */ if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8) return -EINVAL; - if (c->n2 < 3) + if (c->n2 > 255) return -EINVAL; if (c->encapsulation > 1) /* Basic, advanced, no I */ return -EINVAL; From aa6f1613246fc3c78c819b6e72869bcbbb6a3553 Mon Sep 17 00:00:00 2001 From: Daniel Starke Date: Thu, 14 Apr 2022 02:42:17 -0700 Subject: [PATCH 41/67] tty: n_gsm: fix wrong command frame length field encoding commit 398867f59f956985f4c324f173eff7b946e14bd8 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall be made up from type, length and value. Looking for example in chapter 5.4.6.3.5 at the description for the encoding of a flow control on command it becomes obvious, that the type and length field is always present whereas the value may be zero bytes long. The current implementation omits the length field if the value is not present. This is wrong. Correct this by always sending the length in gsm_control_transmit(). So far only the modem status command (MSC) has included a value and encoded its length directly. Therefore, also change gsmtty_modem_update(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 16547a50fedd..ff8399f60876 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1318,11 +1318,12 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command, static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl) { - struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype); + struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype); if (msg == NULL) return; - msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */ - memcpy(msg->data + 1, ctrl->data, ctrl->len); + msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */ + msg->data[1] = (ctrl->len << 1) | EA; + memcpy(msg->data + 2, ctrl->data, ctrl->len); gsm_data_queue(gsm->dlci[0], msg); } @@ -2864,19 +2865,17 @@ static struct tty_ldisc_ops tty_ldisc_packet = { static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk) { - u8 modembits[5]; + u8 modembits[3]; struct gsm_control *ctrl; int len = 2; - if (brk) + modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */ + modembits[1] = (gsm_encode_modem(dlci) << 1) | EA; + if (brk) { + modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */ len++; - - modembits[0] = len << 1 | EA; /* Data bytes */ - modembits[1] = dlci->addr << 2 | 3; /* DLCI, EA, 1 */ - modembits[2] = gsm_encode_modem(dlci) << 1 | EA; - if (brk) - modembits[3] = brk << 4 | 2 | EA; /* Valid, EA */ - ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1); + } + ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len); if (ctrl == NULL) return -ENOMEM; return gsm_control_wait(dlci->gsm, ctrl); From 53db12e62c7957704dcba82c2021af3bd7cdb66d Mon Sep 17 00:00:00 2001 From: Daniel Starke Date: Thu, 14 Apr 2022 02:42:25 -0700 Subject: [PATCH 42/67] tty: n_gsm: fix incorrect UA handling commit ff9166c623704337bd6fe66fce2838d9768a6634 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be discarded. Currently, all UA frame are handled in the same way regardless of the PF bit. This does not comply with the standard. Remove the UA case in gsm_queue() to process only UA frames with PF bit set to 1 to abide the standard. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index ff8399f60876..3badb10229ef 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1829,7 +1829,6 @@ static void gsm_queue(struct gsm_mux *gsm) gsm_response(gsm, address, UA); gsm_dlci_close(dlci); break; - case UA: case UA|PF: if (cr == 0 || dlci == NULL) break; From a2108a3f238a5a60f2874420cfeeb07f60c6bcdd Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Sun, 24 Apr 2022 12:46:23 +0100 Subject: [PATCH 43/67] MIPS: Fix CP0 counter erratum detection for R4k CPUs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit f0a6c68f69981214cb7858738dd2bc81475111f7 upstream. Fix the discrepancy between the two places we check for the CP0 counter erratum in along with the incorrect comparison of the R4400 revision number against 0x30 which matches none and consistently consider all R4000 and R4400 processors affected, as documented in processor errata publications[1][2][3], following the mapping between CP0 PRId register values and processor models: PRId | Processor Model ---------+-------------------- 00000422 | R4000 Revision 2.2 00000430 | R4000 Revision 3.0 00000440 | R4400 Revision 1.0 00000450 | R4400 Revision 2.0 00000460 | R4400 Revision 3.0 No other revision of either processor has ever been spotted. Contrary to what has been stated in commit ce202cbb9e0b ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug") marking the CP0 counter as buggy does not preclude it from being used as either a clock event or a clock source device. It just cannot be used as both at a time, because in that case clock event interrupts will be occasionally lost, and the use as a clock event device takes precedence. Compare against 0x4ff in `can_use_mips_counter' so that a single machine instruction is produced. References: [1] "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", MIPS Technologies Inc., May 10, 1994, Erratum 53, p.13 [2] "MIPS R4400PC/SC Errata, Processor Revision 1.0", MIPS Technologies Inc., February 9, 1994, Erratum 21, p.4 [3] "MIPS R4400PC/SC Errata, Processor Revision 2.0 & 3.0", MIPS Technologies Inc., January 24, 1995, Erratum 14, p.3 Signed-off-by: Maciej W. Rozycki Fixes: ce202cbb9e0b ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug") Cc: stable@vger.kernel.org # v2.6.24+ Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman --- arch/mips/include/asm/timex.h | 8 ++++---- arch/mips/kernel/time.c | 11 +++-------- 2 files changed, 7 insertions(+), 12 deletions(-) diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h index b05bb70a2e46..8026baf46e72 100644 --- a/arch/mips/include/asm/timex.h +++ b/arch/mips/include/asm/timex.h @@ -40,9 +40,9 @@ typedef unsigned int cycles_t; /* - * On R4000/R4400 before version 5.0 an erratum exists such that if the - * cycle counter is read in the exact moment that it is matching the - * compare register, no interrupt will be generated. + * On R4000/R4400 an erratum exists such that if the cycle counter is + * read in the exact moment that it is matching the compare register, + * no interrupt will be generated. * * There is a suggested workaround and also the erratum can't strike if * the compare interrupt isn't being used as the clock source device. @@ -63,7 +63,7 @@ static inline int can_use_mips_counter(unsigned int prid) if (!__builtin_constant_p(cpu_has_counter)) asm volatile("" : "=m" (cpu_data[0].options)); if (likely(cpu_has_counter && - prid >= (PRID_IMP_R4000 | PRID_REV_ENCODE_44(5, 0)))) + prid > (PRID_IMP_R4000 | PRID_REV_ENCODE_44(15, 15)))) return 1; else return 0; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index b15ee1258668..1d6998933788 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -168,15 +168,10 @@ static __init int cpu_has_mfc0_count_bug(void) case CPU_R4400MC: /* * The published errata for the R4400 up to 3.0 say the CPU - * has the mfc0 from count bug. + * has the mfc0 from count bug. This seems the last version + * produced. */ - if ((current_cpu_data.processor_id & 0xff) <= 0x30) - return 1; - - /* - * we assume newer revisions are ok - */ - return 0; + return 1; } return 0; From 74a026832800bb458d2d5f8bce39a51fe399e872 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 3 Apr 2022 21:57:51 +0200 Subject: [PATCH 44/67] parisc: Merge model and model name into one line in /proc/cpuinfo commit 5b89966bc96a06f6ad65f64ae4b0461918fcc9d3 upstream. The Linux tool "lscpu" shows the double amount of CPUs if we have "model" and "model name" in two different lines in /proc/cpuinfo. This change combines the model and the model name into one line. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- arch/parisc/kernel/processor.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 0c2a94a0f751..e31633dcb0f3 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -390,8 +390,7 @@ show_cpuinfo (struct seq_file *m, void *v) } seq_printf(m, " (0x%02lx)\n", boot_cpu_data.pdc.capabilities); - seq_printf(m, "model\t\t: %s\n" - "model name\t: %s\n", + seq_printf(m, "model\t\t: %s - %s\n", boot_cpu_data.pdc.sys_model_name, cpuinfo->dev ? cpuinfo->dev->name : "Unknown"); From eff53e09e1871e92105aa7c04136680422f02c34 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 24 Apr 2022 19:24:28 +0900 Subject: [PATCH 45/67] ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes commit eb9d84b0ffe39893cb23b0b6712bbe3637fa25fa upstream. ALSA fireworks driver has a bug in its initial state to return count shorter than expected by 4 bytes to userspace applications when handling response frame for Echo Audio Fireworks transaction. It's due to missing addition of the size for the type of event in ALSA firewire stack. Fixes: 555e8a8f7f14 ("ALSA: fireworks: Add command/response functionality into hwdep interface") Cc: Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220424102428.21109-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/firewire/fireworks/fireworks_hwdep.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/firewire/fireworks/fireworks_hwdep.c b/sound/firewire/fireworks/fireworks_hwdep.c index 2e1d9a23920c..09ba61f60699 100644 --- a/sound/firewire/fireworks/fireworks_hwdep.c +++ b/sound/firewire/fireworks/fireworks_hwdep.c @@ -35,6 +35,7 @@ hwdep_read_resp_buf(struct snd_efw *efw, char __user *buf, long remained, type = SNDRV_FIREWIRE_EVENT_EFW_RESPONSE; if (copy_to_user(buf, &type, sizeof(type))) return -EFAULT; + count += sizeof(type); remained -= sizeof(type); buf += sizeof(type); From 204b6bd9674efd95605c3a80c38c25d74d59fee1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 29 Apr 2022 12:27:30 -0400 Subject: [PATCH 46/67] Revert "SUNRPC: attempt AF_LOCAL connect on setup" commit a3d0562d4dc039bca39445e1cddde7951662e17d upstream. This reverts commit 7073ea8799a8cf73db60270986f14e4aae20fa80. We must not try to connect the socket while the transport is under construction, because the mechanisms to safely tear it down are not in place. As the code stands, we end up leaking the sockets on a connection error. Reported-by: wanghai (M) Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman --- net/sunrpc/xprtsock.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index bf20ea260638..4e2c49cb692c 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2882,9 +2882,6 @@ static struct rpc_xprt *xs_setup_local(struct xprt_create *args) } xprt_set_bound(xprt); xs_format_peer_addresses(xprt, "local", RPCBIND_NETID_LOCAL); - ret = ERR_PTR(xs_local_setup_socket(transport)); - if (ret) - goto out_err; break; default: ret = ERR_PTR(-EAFNOSUPPORT); From 2a08a260d2294b2ecd4190cceaaf12ae81f3cb9f Mon Sep 17 00:00:00 2001 From: Chengfeng Ye Date: Sat, 9 Apr 2022 13:12:41 +0900 Subject: [PATCH 47/67] firewire: fix potential uaf in outbound_phy_packet_callback() commit b7c81f80246fac44077166f3e07103affe6db8ff upstream. &e->event and e point to the same address, and &e->event could be freed in queue_event. So there is a potential uaf issue if we dereference e after calling queue_event(). Fix this by adding a temporary variable to maintain e->client in advance, this can avoid the potential uaf issue. Cc: Signed-off-by: Chengfeng Ye Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220409041243.603210-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- drivers/firewire/core-cdev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index aee149bdf4c0..59b49ff1f4be 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -1496,6 +1496,7 @@ static void outbound_phy_packet_callback(struct fw_packet *packet, { struct outbound_phy_packet_event *e = container_of(packet, struct outbound_phy_packet_event, p); + struct client *e_client; switch (status) { /* expected: */ @@ -1512,9 +1513,10 @@ static void outbound_phy_packet_callback(struct fw_packet *packet, } e->phy_packet.data[0] = packet->timestamp; + e_client = e->client; queue_event(e->client, &e->event, &e->phy_packet, sizeof(e->phy_packet) + e->phy_packet.length, NULL, 0); - client_put(e->client); + client_put(e_client); } static int ioctl_send_phy_packet(struct client *client, union ioctl_arg *arg) From 344c9c80ee78b0133901c84ff2bc8e978ebbd5d9 Mon Sep 17 00:00:00 2001 From: Jakob Koschel Date: Sat, 9 Apr 2022 13:12:42 +0900 Subject: [PATCH 48/67] firewire: remove check of list iterator against head past the loop body commit 9423973869bd4632ffe669f950510c49296656e0 upstream. When list_for_each_entry() completes the iteration over the whole list without breaking the loop, the iterator value will be a bogus pointer computed based on the head element. While it is safe to use the pointer to determine if it was computed based on the head element, either with list_entry_is_head() or &pos->member == head, using the iterator variable after the loop should be avoided. In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to point to the found element [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Cc: Signed-off-by: Jakob Koschel Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220409041243.603210-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- drivers/firewire/core-transaction.c | 30 +++++++++++++++-------------- drivers/firewire/sbp2.c | 13 +++++++------ 2 files changed, 23 insertions(+), 20 deletions(-) diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index d6a09b9cd8cc..0446221d7d2e 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -86,24 +86,25 @@ static int try_cancel_split_timeout(struct fw_transaction *t) static int close_transaction(struct fw_transaction *transaction, struct fw_card *card, int rcode) { - struct fw_transaction *t; + struct fw_transaction *t = NULL, *iter; unsigned long flags; spin_lock_irqsave(&card->lock, flags); - list_for_each_entry(t, &card->transaction_list, link) { - if (t == transaction) { - if (!try_cancel_split_timeout(t)) { + list_for_each_entry(iter, &card->transaction_list, link) { + if (iter == transaction) { + if (!try_cancel_split_timeout(iter)) { spin_unlock_irqrestore(&card->lock, flags); goto timed_out; } - list_del_init(&t->link); - card->tlabel_mask &= ~(1ULL << t->tlabel); + list_del_init(&iter->link); + card->tlabel_mask &= ~(1ULL << iter->tlabel); + t = iter; break; } } spin_unlock_irqrestore(&card->lock, flags); - if (&t->link != &card->transaction_list) { + if (t) { t->callback(card, rcode, NULL, 0, t->callback_data); return 0; } @@ -938,7 +939,7 @@ EXPORT_SYMBOL(fw_core_handle_request); void fw_core_handle_response(struct fw_card *card, struct fw_packet *p) { - struct fw_transaction *t; + struct fw_transaction *t = NULL, *iter; unsigned long flags; u32 *data; size_t data_length; @@ -950,20 +951,21 @@ void fw_core_handle_response(struct fw_card *card, struct fw_packet *p) rcode = HEADER_GET_RCODE(p->header[1]); spin_lock_irqsave(&card->lock, flags); - list_for_each_entry(t, &card->transaction_list, link) { - if (t->node_id == source && t->tlabel == tlabel) { - if (!try_cancel_split_timeout(t)) { + list_for_each_entry(iter, &card->transaction_list, link) { + if (iter->node_id == source && iter->tlabel == tlabel) { + if (!try_cancel_split_timeout(iter)) { spin_unlock_irqrestore(&card->lock, flags); goto timed_out; } - list_del_init(&t->link); - card->tlabel_mask &= ~(1ULL << t->tlabel); + list_del_init(&iter->link); + card->tlabel_mask &= ~(1ULL << iter->tlabel); + t = iter; break; } } spin_unlock_irqrestore(&card->lock, flags); - if (&t->link == &card->transaction_list) { + if (!t) { timed_out: fw_notice(card, "unsolicited response (source %x, tlabel %x)\n", source, tlabel); diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 6bac03999fd4..d418a71faf0b 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -421,7 +421,7 @@ static void sbp2_status_write(struct fw_card *card, struct fw_request *request, void *payload, size_t length, void *callback_data) { struct sbp2_logical_unit *lu = callback_data; - struct sbp2_orb *orb; + struct sbp2_orb *orb = NULL, *iter; struct sbp2_status status; unsigned long flags; @@ -446,17 +446,18 @@ static void sbp2_status_write(struct fw_card *card, struct fw_request *request, /* Lookup the orb corresponding to this status write. */ spin_lock_irqsave(&lu->tgt->lock, flags); - list_for_each_entry(orb, &lu->orb_list, link) { + list_for_each_entry(iter, &lu->orb_list, link) { if (STATUS_GET_ORB_HIGH(status) == 0 && - STATUS_GET_ORB_LOW(status) == orb->request_bus) { - orb->rcode = RCODE_COMPLETE; - list_del(&orb->link); + STATUS_GET_ORB_LOW(status) == iter->request_bus) { + iter->rcode = RCODE_COMPLETE; + list_del(&iter->link); + orb = iter; break; } } spin_unlock_irqrestore(&lu->tgt->lock, flags); - if (&orb->link != &lu->orb_list) { + if (orb) { orb->callback(orb, &status); kref_put(&orb->kref, free_orb); /* orb callback reference */ } else { From 71fb770635ff3679a0944404da035d92496e10ca Mon Sep 17 00:00:00 2001 From: Niels Dossche Date: Sat, 9 Apr 2022 13:12:43 +0900 Subject: [PATCH 49/67] firewire: core: extend card->lock in fw_core_handle_bus_reset commit a7ecbe92b9243edbe94772f6f2c854e4142a3345 upstream. card->local_node and card->bm_retries are both always accessed under card->lock. fw_core_handle_bus_reset has a check whose condition depends on card->local_node and whose body writes to card->bm_retries. Both of these accesses are not under card->lock. Move the lock acquiring of card->lock to before this check such that these accesses do happen when card->lock is held. fw_destroy_nodes is called inside the check. Since fw_destroy_nodes already acquires card->lock inside its function body, move this out to the callsites of fw_destroy_nodes. Also add a comment to indicate which locking is necessary when calling fw_destroy_nodes. Cc: Signed-off-by: Niels Dossche Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220409041243.603210-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- drivers/firewire/core-card.c | 3 +++ drivers/firewire/core-topology.c | 9 +++------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 57ea7f464178..11c634125c7d 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -681,6 +681,7 @@ EXPORT_SYMBOL_GPL(fw_card_release); void fw_core_remove_card(struct fw_card *card) { struct fw_card_driver dummy_driver = dummy_driver_template; + unsigned long flags; card->driver->update_phy_reg(card, 4, PHY_LINK_ACTIVE | PHY_CONTENDER, 0); @@ -695,7 +696,9 @@ void fw_core_remove_card(struct fw_card *card) dummy_driver.stop_iso = card->driver->stop_iso; card->driver = &dummy_driver; + spin_lock_irqsave(&card->lock, flags); fw_destroy_nodes(card); + spin_unlock_irqrestore(&card->lock, flags); /* Wait for all users, especially device workqueue jobs, to finish. */ fw_card_put(card); diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index 0de83508f321..2337b0f3dae2 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -387,16 +387,13 @@ static void report_found_node(struct fw_card *card, card->bm_retries = 0; } +/* Must be called with card->lock held */ void fw_destroy_nodes(struct fw_card *card) { - unsigned long flags; - - spin_lock_irqsave(&card->lock, flags); card->color++; if (card->local_node != NULL) for_each_fw_node(card, card->local_node, report_lost_node); card->local_node = NULL; - spin_unlock_irqrestore(&card->lock, flags); } static void move_tree(struct fw_node *node0, struct fw_node *node1, int port) @@ -522,6 +519,8 @@ void fw_core_handle_bus_reset(struct fw_card *card, int node_id, int generation, struct fw_node *local_node; unsigned long flags; + spin_lock_irqsave(&card->lock, flags); + /* * If the selfID buffer is not the immediate successor of the * previously processed one, we cannot reliably compare the @@ -533,8 +532,6 @@ void fw_core_handle_bus_reset(struct fw_card *card, int node_id, int generation, card->bm_retries = 0; } - spin_lock_irqsave(&card->lock, flags); - card->broadcast_channel_allocated = card->broadcast_channel_auto_allocated; card->node_id = node_id; /* From 410d87c0057756b87888c0a7036a5c18719d7fd1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 16 Apr 2022 13:54:08 +0100 Subject: [PATCH 50/67] ASoC: wm8958: Fix change notifications for DSP controls commit b4f5c6b2e52b27462c0599e64e96e53b58438de1 upstream. The WM8958 DSP controls all return 0 on successful write, not a boolean value indicating if the write changed the value of the control. Fix this by returning 1 after a change, there is already a check at the start of each put() that skips the function in the case that there is no change. Signed-off-by: Mark Brown Acked-by: Charles Keepax Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- sound/soc/codecs/wm8958-dsp2.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c index 6b864c0fc2b6..fa803cef2324 100644 --- a/sound/soc/codecs/wm8958-dsp2.c +++ b/sound/soc/codecs/wm8958-dsp2.c @@ -533,7 +533,7 @@ static int wm8958_mbc_put(struct snd_kcontrol *kcontrol, wm8958_dsp_apply(codec, mbc, wm8994->mbc_ena[mbc]); - return 0; + return 1; } #define WM8958_MBC_SWITCH(xname, xval) {\ @@ -659,7 +659,7 @@ static int wm8958_vss_put(struct snd_kcontrol *kcontrol, wm8958_dsp_apply(codec, vss, wm8994->vss_ena[vss]); - return 0; + return 1; } @@ -733,7 +733,7 @@ static int wm8958_hpf_put(struct snd_kcontrol *kcontrol, wm8958_dsp_apply(codec, hpf % 3, ucontrol->value.integer.value[0]); - return 0; + return 1; } #define WM8958_HPF_SWITCH(xname, xval) {\ @@ -827,7 +827,7 @@ static int wm8958_enh_eq_put(struct snd_kcontrol *kcontrol, wm8958_dsp_apply(codec, eq, ucontrol->value.integer.value[0]); - return 0; + return 1; } #define WM8958_ENH_EQ_SWITCH(xname, xval) {\ From 52ab871523497779be224dc66fc5aa03ef5d8ac1 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Mon, 25 Apr 2022 12:24:00 +0800 Subject: [PATCH 51/67] can: grcan: grcan_close(): fix deadlock commit 47f070a63e735bcc8d481de31be1b5a1aa62b31c upstream. There are deadlocks caused by del_timer_sync(&priv->hang_timer) and del_timer_sync(&priv->rr_timer) in grcan_close(), one of the deadlocks are shown below: (Thread 1) | (Thread 2) | grcan_reset_timer() grcan_close() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | grcan_initiate_running_reset() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold priv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need priv->lock in position (2) of thread 2. As a result, grcan_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Link: https://lore.kernel.org/all/20220425042400.66517-1-duoming@zju.edu.cn Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Cc: stable@vger.kernel.org Signed-off-by: Duoming Zhou Reviewed-by: Andreas Larsson Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/grcan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c index db9538d4b358..bebe096ec657 100644 --- a/drivers/net/can/grcan.c +++ b/drivers/net/can/grcan.c @@ -1117,8 +1117,10 @@ static int grcan_close(struct net_device *dev) priv->closing = true; if (priv->need_txbug_workaround) { + spin_unlock_irqrestore(&priv->lock, flags); del_timer_sync(&priv->hang_timer); del_timer_sync(&priv->rr_timer); + spin_lock_irqsave(&priv->lock, flags); } netif_stop_queue(dev); grcan_stop_hardware(dev); From 5054806fc11edebe4b8a3dd673cffc704834e3fc Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 29 Apr 2022 10:46:54 +0200 Subject: [PATCH 52/67] can: grcan: use ofdev->dev when allocating DMA memory commit 101da4268626b00d16356a6bf284d66e44c46ff9 upstream. Use the device of the device tree node should be rather than the device of the struct net_device when allocating DMA buffers. The driver got away with it on sparc32 until commit 53b7670e5735 ("sparc: factor the dma coherent mapping into helper") after which the driver oopses. Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-2-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by: Daniel Hellstrom Signed-off-by: Andreas Larsson Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/grcan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c index bebe096ec657..a2dbd7ae9db2 100644 --- a/drivers/net/can/grcan.c +++ b/drivers/net/can/grcan.c @@ -252,6 +252,7 @@ struct grcan_device_config { struct grcan_priv { struct can_priv can; /* must be the first member */ struct net_device *dev; + struct device *ofdev_dev; struct napi_struct napi; struct grcan_registers __iomem *regs; /* ioremap'ed registers */ @@ -928,7 +929,7 @@ static void grcan_free_dma_buffers(struct net_device *dev) struct grcan_priv *priv = netdev_priv(dev); struct grcan_dma *dma = &priv->dma; - dma_free_coherent(&dev->dev, dma->base_size, dma->base_buf, + dma_free_coherent(priv->ofdev_dev, dma->base_size, dma->base_buf, dma->base_handle); memset(dma, 0, sizeof(*dma)); } @@ -953,7 +954,7 @@ static int grcan_allocate_dma_buffers(struct net_device *dev, /* Extra GRCAN_BUFFER_ALIGNMENT to allow for alignment */ dma->base_size = lsize + ssize + GRCAN_BUFFER_ALIGNMENT; - dma->base_buf = dma_alloc_coherent(&dev->dev, + dma->base_buf = dma_alloc_coherent(priv->ofdev_dev, dma->base_size, &dma->base_handle, GFP_KERNEL); @@ -1606,6 +1607,7 @@ static int grcan_setup_netdev(struct platform_device *ofdev, memcpy(&priv->config, &grcan_module_config, sizeof(struct grcan_device_config)); priv->dev = dev; + priv->ofdev_dev = &ofdev->dev; priv->regs = base; priv->can.bittiming_const = &grcan_bittiming_const; priv->can.do_set_bittiming = grcan_set_bittiming; From fa2217b66467917a623993c14d671661ad625fb6 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Fri, 29 Apr 2022 20:45:50 +0800 Subject: [PATCH 53/67] nfc: replace improper check device_is_registered() in netlink related functions commit da5c0f119203ad9728920456a0f52a6d850c01cd upstream. The device_is_registered() in nfc core is used to check whether nfc device is registered in netlink related functions such as nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered() is protected by device_lock, there is still a race condition between device_del() and device_is_registered(). The root cause is that kobject_del() in device_del() is not protected by device_lock. (cleanup task) | (netlink task) | nfc_unregister_device | nfc_fw_download device_del | device_lock ... | if (!device_is_registered)//(1) kobject_del//(2) | ... ... | device_unlock The device_is_registered() returns the value of state_in_sysfs and the state_in_sysfs is set to zero in kobject_del(). If we pass check in position (1), then set zero in position (2). As a result, the check in position (1) is useless. This patch uses bool variable instead of device_is_registered() to judge whether the nfc device is registered, which is well synchronized. Fixes: 3e256b8f8dfa ("NFC: add nfc subsystem core") Signed-off-by: Duoming Zhou Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/nfc/core.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/net/nfc/core.c b/net/nfc/core.c index 32a2dfc08f48..8c38a21fb0c6 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -50,7 +50,7 @@ int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -106,7 +106,7 @@ int nfc_dev_up(struct nfc_dev *dev) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -154,7 +154,7 @@ int nfc_dev_down(struct nfc_dev *dev) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -218,7 +218,7 @@ int nfc_start_poll(struct nfc_dev *dev, u32 im_protocols, u32 tm_protocols) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -257,7 +257,7 @@ int nfc_stop_poll(struct nfc_dev *dev) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -302,7 +302,7 @@ int nfc_dep_link_up(struct nfc_dev *dev, int target_index, u8 comm_mode) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -346,7 +346,7 @@ int nfc_dep_link_down(struct nfc_dev *dev) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -412,7 +412,7 @@ int nfc_activate_target(struct nfc_dev *dev, u32 target_idx, u32 protocol) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -458,7 +458,7 @@ int nfc_deactivate_target(struct nfc_dev *dev, u32 target_idx, u8 mode) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -505,7 +505,7 @@ int nfc_data_exchange(struct nfc_dev *dev, u32 target_idx, struct sk_buff *skb, device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; kfree_skb(skb); goto error; @@ -562,7 +562,7 @@ int nfc_enable_se(struct nfc_dev *dev, u32 se_idx) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -611,7 +611,7 @@ int nfc_disable_se(struct nfc_dev *dev, u32 se_idx) device_lock(&dev->dev); - if (!device_is_registered(&dev->dev)) { + if (dev->shutting_down) { rc = -ENODEV; goto error; } @@ -1142,6 +1142,7 @@ int nfc_register_device(struct nfc_dev *dev) dev->rfkill = NULL; } } + dev->shutting_down = false; device_unlock(&dev->dev); rc = nfc_genl_device_added(dev); @@ -1174,12 +1175,10 @@ void nfc_unregister_device(struct nfc_dev *dev) rfkill_unregister(dev->rfkill); rfkill_destroy(dev->rfkill); } + dev->shutting_down = true; device_unlock(&dev->dev); if (dev->ops->check_presence) { - device_lock(&dev->dev); - dev->shutting_down = true; - device_unlock(&dev->dev); del_timer_sync(&dev->check_pres_timer); cancel_work_sync(&dev->check_pres_work); } From 4721695be941626e4b18b89e0641e36fc385cfd8 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Fri, 29 Apr 2022 20:45:51 +0800 Subject: [PATCH 54/67] nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs commit d270453a0d9ec10bb8a802a142fb1b3601a83098 upstream. There are destructive operations such as nfcmrvl_fw_dnld_abort and gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware, gpio and so on could be destructed while the upper layer functions such as nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads to double-free, use-after-free and null-ptr-deref bugs. There are three situations that could lead to double-free bugs. The first situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | nfcmrvl_nci_unregister_dev release_firmware() | nfcmrvl_fw_dnld_abort kfree(fw) //(1) | fw_dnld_over | release_firmware ... | kfree(fw) //(2) | ... The second situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | mod_timer | (wait a time) | fw_dnld_timeout | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware ... | kfree(fw) //(2) The third situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_nci_recv_frame | if(..->fw_download_in_progress)| nfcmrvl_fw_dnld_recv_frame | queue_work | | fw_dnld_rx_work | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware | kfree(fw) //(2) The firmware struct is deallocated in position (1) and deallocated in position (2) again. The crash trace triggered by POC is like below: BUG: KASAN: double-free or invalid-free in fw_dnld_over Call Trace: kfree fw_dnld_over nfcmrvl_nci_unregister_dev nci_uart_tty_close tty_ldisc_kill tty_ldisc_hangup __tty_hangup.part.0 tty_release ... What's more, there are also use-after-free and null-ptr-deref bugs in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev, then, we dereference firmware, gpio or the members of priv->fw_dnld in nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen. This patch reorders destructive operations after nci_unregister_device in order to synchronize between cleanup routine and firmware download routine. The nci_unregister_device is well synchronized. If the device is detaching, the firmware download routine will goto error. If firmware download routine is executing, nci_unregister_device will wait until firmware download routine is finished. Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support") Signed-off-by: Duoming Zhou Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/nfc/nfcmrvl/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c index a446590a71ca..cd44c1d27b12 100644 --- a/drivers/nfc/nfcmrvl/main.c +++ b/drivers/nfc/nfcmrvl/main.c @@ -194,6 +194,7 @@ void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv) { struct nci_dev *ndev = priv->ndev; + nci_unregister_device(ndev); if (priv->ndev->nfc_dev->fw_download_in_progress) nfcmrvl_fw_dnld_abort(priv); @@ -202,7 +203,6 @@ void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv) if (priv->config.reset_n_io) gpio_free(priv->config.reset_n_io); - nci_unregister_device(ndev); nci_free_device(ndev); kfree(priv); } From a93ea9595fde438996d7b9322749d4d1921162f7 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Wed, 4 May 2022 13:58:47 +0800 Subject: [PATCH 55/67] NFC: netlink: fix sleep in atomic bug when firmware download timeout commit 4071bf121d59944d5cd2238de0642f3d7995a997 upstream. There are sleep in atomic bug that could cause kernel panic during firmware download process. The root cause is that nlmsg_new with GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer handler. The call trace is shown below: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265 Call Trace: kmem_cache_alloc_node __alloc_skb nfc_genl_fw_download_done call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq ... The nlmsg_new with GFP_KERNEL parameter may sleep during memory allocation process, and the timer handler is run as the result of a "software interrupt" that should not call any other function that could sleep. This patch changes allocation mode of netlink message from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: 9674da8759df ("NFC: Add firmware upload netlink command") Fixes: 9ea7187c53f6 ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD") Signed-off-by: Duoming Zhou Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman --- net/nfc/netlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c index 6e771022d43e..9750997643bb 100644 --- a/net/nfc/netlink.c +++ b/net/nfc/netlink.c @@ -1254,7 +1254,7 @@ int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name, struct sk_buff *msg; void *hdr; - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!msg) return -ENOMEM; @@ -1270,7 +1270,7 @@ int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name, genlmsg_end(msg, hdr); - genlmsg_multicast(&nfc_genl_family, msg, 0, 0, GFP_KERNEL); + genlmsg_multicast(&nfc_genl_family, msg, 0, 0, GFP_ATOMIC); return 0; From 36014b3b7a6931d62a0213fcd0db0811e6133095 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Thu, 7 Apr 2022 12:13:12 +0200 Subject: [PATCH 56/67] hwmon: (adt7470) Fix warning on module removal commit 7b2666ce445c700b8dcee994da44ddcf050a0842 upstream. When removing the adt7470 module, a warning might be printed: do not call blocking ops when !TASK_RUNNING; state=1 set at [] adt7470_update_thread+0x7b/0x130 [adt7470] This happens because adt7470_update_thread() can leave the kthread in TASK_INTERRUPTIBLE state when the kthread is being stopped before the call of set_current_state(). Since kthread_exit() might sleep in exit_signals(), the warning is printed. Fix that by using schedule_timeout_interruptible() and removing the call of set_current_state(). This causes TASK_INTERRUPTIBLE to be set after kthread_should_stop() which might cause the kthread to exit. Reported-by: Zheyu Ma Fixes: 93cacfd41f82 (hwmon: (adt7470) Allow faster removal) Signed-off-by: Armin Wolf Tested-by: Zheyu Ma Link: https://lore.kernel.org/r/20220407101312.13331-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adt7470.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 6e60ca53406e..474f226e0891 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -33,6 +33,7 @@ #include #include #include +#include /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; @@ -273,11 +274,10 @@ static int adt7470_update_thread(void *p) adt7470_read_temperatures(client, data); mutex_unlock(&data->lock); - set_current_state(TASK_INTERRUPTIBLE); if (kthread_should_stop()) break; - schedule_timeout(msecs_to_jiffies(data->auto_update_interval)); + schedule_timeout_interruptible(msecs_to_jiffies(data->auto_update_interval)); } return 0; From b427ea860d698634c6dea18da6ba8be0dcc15061 Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Thu, 21 Apr 2022 15:54:02 +0300 Subject: [PATCH 57/67] ASoC: dmaengine: Restore NULL prepare_slave_config() callback commit 660564fc9a92a893a14f255be434f7ea0b967901 upstream. As pointed out by Sascha Hauer, this patch changes: if (pmc->config && !pcm->config->prepare_slave_config) to: if (pmc->config && !pcm->config->prepare_slave_config) snd_dmaengine_pcm_prepare_slave_config() This breaks the drivers that do not need a call to dmaengine_slave_config(). Drivers that still need to call snd_dmaengine_pcm_prepare_slave_config(), but have a NULL pcm->config->prepare_slave_config should use snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config callback. Fixes: 9a1e13440a4f ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback") Reported-by: Sascha Hauer Signed-off-by: Codrin Ciubotariu Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- sound/soc/soc-generic-dmaengine-pcm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 61f0c9d6f6dc..67d22b4baeb0 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -98,10 +98,10 @@ static int dmaengine_pcm_hw_params(struct snd_pcm_substream *substream, memset(&slave_config, 0, sizeof(slave_config)); - if (pcm->config && pcm->config->prepare_slave_config) - prepare_slave_config = pcm->config->prepare_slave_config; - else + if (!pcm->config) prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config; + else + prepare_slave_config = pcm->config->prepare_slave_config; if (prepare_slave_config) { ret = prepare_slave_config(substream, params, &slave_config); From 65aeefef255e4c460a815e233dc313fed1859e29 Mon Sep 17 00:00:00 2001 From: Shravya Kumbham Date: Mon, 2 May 2022 12:57:50 +0530 Subject: [PATCH 58/67] net: emaclite: Add error handling for of_address_to_resource() commit 7a6bc33ab54923d325d9a1747ec9652c4361ebd1 upstream. check the return value of of_address_to_resource() and also add missing of_node_put() for np and npp nodes. Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus") Addresses-Coverity: Event check_return value. Signed-off-by: Shravya Kumbham Signed-off-by: Radhey Shyam Pandey Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 1f9a6ea356b0..cdcc86060749 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -817,10 +817,10 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) { struct mii_bus *bus; - int rc; struct resource res; struct device_node *np = of_get_parent(lp->phy_node); struct device_node *npp; + int rc, ret; /* Don't register the MDIO bus if the phy_node or its parent node * can't be found. @@ -830,8 +830,14 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) return -ENODEV; } npp = of_get_parent(np); - - of_address_to_resource(npp, 0, &res); + ret = of_address_to_resource(npp, 0, &res); + of_node_put(npp); + if (ret) { + dev_err(dev, "%s resource error!\n", + dev->of_node->full_name); + of_node_put(np); + return ret; + } if (lp->ndev->mem_start != res.start) { struct phy_device *phydev; phydev = of_phy_find_device(lp->phy_node); @@ -840,6 +846,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) "MDIO of the phy is not registered yet\n"); else put_device(&phydev->mdio.dev); + of_node_put(np); return 0; } @@ -852,6 +859,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) bus = mdiobus_alloc(); if (!bus) { dev_err(dev, "Failed to allocate mdiobus\n"); + of_node_put(np); return -ENOMEM; } @@ -866,6 +874,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) lp->mii_bus = bus; rc = of_mdiobus_register(bus, np); + of_node_put(np); if (rc) { dev_err(dev, "Failed to register mdio bus.\n"); goto err_register; From 7c392aeb49a807715dd0e23180326705306f10f1 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Mon, 2 May 2022 23:14:09 +0300 Subject: [PATCH 59/67] smsc911x: allow using IRQ0 commit 5ef9b803a4af0f5e42012176889b40bb2a978b18 upstream. The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC LAN911x Ethernet chip, so the networking on them must have been broken by commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") which filtered out 0 as well as the negative error codes -- it was kinda correct at the time, as platform_get_irq() could return 0 on of_irq_get() failure and on the actual 0 in an IRQ resource. This issue was fixed by me (back in 2016!), so we should be able to fix this driver to allow IRQ0 usage again... When merging this to the stable kernels, make sure you also merge commit e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]() on error") -- that's my fix to platform_get_irq() for the DT platforms... Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ru Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/smsc/smsc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 264136dba674..5eaee7a3ac17 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2441,7 +2441,7 @@ static int smsc911x_drv_probe(struct platform_device *pdev) if (irq == -EPROBE_DEFER) { retval = -EPROBE_DEFER; goto out_0; - } else if (irq <= 0) { + } else if (irq < 0) { pr_warn("Could not allocate irq resource\n"); retval = -ENODEV; goto out_0; From 3f0257d3f64211e2813c3634ae08863446773b8b Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 21 Apr 2022 10:56:39 +0100 Subject: [PATCH 60/67] btrfs: always log symlinks in full mode commit d0e64a981fd841cb0f28fcd6afcac55e6f1e6994 upstream. On Linux, empty symlinks are invalid, and attempting to create one with the system call symlink(2) results in an -ENOENT error and this is explicitly documented in the man page. If we rename a symlink that was created in the current transaction and its parent directory was logged before, we actually end up logging the symlink without logging its content, which is stored in an inline extent. That means that after a power failure we can end up with an empty symlink, having no content and an i_size of 0 bytes. It can be easily reproduced like this: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ sync # Create a file inside the directory and fsync the directory. $ touch /mnt/testdir/foo $ xfs_io -c "fsync" /mnt/testdir # Create a symlink inside the directory and then rename the symlink. $ ln -s /mnt/testdir/foo /mnt/testdir/bar $ mv /mnt/testdir/bar /mnt/testdir/baz # Now fsync again the directory, this persist the log tree. $ xfs_io -c "fsync" /mnt/testdir $ mount /dev/sdc /mnt $ stat -c %s /mnt/testdir/baz 0 $ readlink /mnt/testdir/baz $ Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that their content is also logged. A test case for fstests will follow. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/tree-log.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index cc91b0c564a3..312c050d0dbd 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -4696,6 +4696,18 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, mutex_lock(&BTRFS_I(inode)->log_mutex); } + /* + * For symlinks, we must always log their content, which is stored in an + * inline extent, otherwise we could end up with an empty symlink after + * log replay, which is invalid on linux (symlink(2) returns -ENOENT if + * one attempts to create an empty symlink). + * We don't need to worry about flushing delalloc, because when we create + * the inline extent when the symlink is created (we never have delalloc + * for symlinks). + */ + if (S_ISLNK(inode->i_mode)) + inode_only = LOG_INODE_ALL; + /* * a brute force approach to making sure we get the most uptodate * copies of everything. @@ -5271,7 +5283,7 @@ static int log_new_dir_dentries(struct btrfs_trans_handle *trans, } ctx->log_new_dentries = false; - if (type == BTRFS_FT_DIR || type == BTRFS_FT_SYMLINK) + if (type == BTRFS_FT_DIR) log_mode = LOG_INODE_ALL; ret = btrfs_log_inode(trans, root, di_inode, log_mode, 0, LLONG_MAX, ctx); From 7815943e670c52997072a7561d369cab241a7713 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 Apr 2022 08:42:57 -0700 Subject: [PATCH 61/67] net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter() commit dba5bdd57bea587ea4f0b79b03c71135f84a7e8b upstream. syzbot reported an UAF in ip_mc_sf_allow() [1] Whenever RCU protected list replaces an object, the pointer to the new object needs to be updated _before_ the call to kfree_rcu() or call_rcu() Because kfree_rcu(ptr, rcu) got support for NULL ptr only recently in commit 12edff045bc6 ("rcu: Make kfree_rcu() ignore NULL pointers"), I chose to use the conditional to make sure stable backports won't miss this detail. if (psl) kfree_rcu(psl, rcu); net/ipv6/mcast.c has similar issues, addressed in a separate patch. [1] BUG: KASAN: use-after-free in ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655 Read of size 4 at addr ffff88807d37b904 by task syz-executor.5/908 CPU: 0 PID: 908 Comm: syz-executor.5 Not tainted 5.18.0-rc4-syzkaller-00064-g8f4dd16603ce #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655 raw_v4_input net/ipv4/raw.c:190 [inline] raw_local_deliver+0x4d1/0xbe0 net/ipv4/raw.c:218 ip_protocol_deliver_rcu+0xcf/0xb30 net/ipv4/ip_input.c:193 ip_local_deliver_finish+0x2ee/0x4c0 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x1b3/0x200 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish+0x1cb/0x2f0 net/ipv4/ip_input.c:437 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0xaa/0xd0 net/ipv4/ip_input.c:556 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 netif_receive_skb_internal net/core/dev.c:5605 [inline] netif_receive_skb+0x13e/0x8e0 net/core/dev.c:5664 tun_rx_batched.isra.0+0x460/0x720 drivers/net/tun.c:1534 tun_get_user+0x28b7/0x3e30 drivers/net/tun.c:1985 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2015 call_write_iter include/linux/fs.h:2050 [inline] new_sync_write+0x38a/0x560 fs/read_write.c:504 vfs_write+0x7c0/0xac0 fs/read_write.c:591 ksys_write+0x127/0x250 fs/read_write.c:644 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f3f12c3bbff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 99 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 cc fd ff ff 48 RSP: 002b:00007f3f13ea9130 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f3f12d9bf60 RCX: 00007f3f12c3bbff RDX: 0000000000000036 RSI: 0000000020002ac0 RDI: 00000000000000c8 RBP: 00007f3f12ce308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000036 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffb68dd79f R14: 00007f3f13ea9300 R15: 0000000000022000 Allocated by task 908: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 kasan_kmalloc include/linux/kasan.h:234 [inline] __do_kmalloc mm/slab.c:3710 [inline] __kmalloc+0x209/0x4d0 mm/slab.c:3719 kmalloc include/linux/slab.h:586 [inline] sock_kmalloc net/core/sock.c:2501 [inline] sock_kmalloc+0xb5/0x100 net/core/sock.c:2492 ip_mc_source+0xba2/0x1100 net/ipv4/igmp.c:2392 do_ip_setsockopt net/ipv4/ip_sockglue.c:1296 [inline] ip_setsockopt+0x2312/0x3ab0 net/ipv4/ip_sockglue.c:1432 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 753: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0x13d/0x180 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:200 [inline] __cache_free mm/slab.c:3439 [inline] kmem_cache_free_bulk+0x69/0x460 mm/slab.c:3774 kfree_bulk include/linux/slab.h:437 [inline] kfree_rcu_work+0x51c/0xa10 kernel/rcu/tree.c:3318 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348 kvfree_call_rcu+0x74/0x990 kernel/rcu/tree.c:3595 ip_mc_msfilter+0x712/0xb60 net/ipv4/igmp.c:2510 do_ip_setsockopt net/ipv4/ip_sockglue.c:1257 [inline] ip_setsockopt+0x32e1/0x3ab0 net/ipv4/ip_sockglue.c:1432 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348 call_rcu+0x99/0x790 kernel/rcu/tree.c:3074 mpls_dev_notify+0x552/0x8a0 net/mpls/af_mpls.c:1656 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1938 call_netdevice_notifiers_extack net/core/dev.c:1976 [inline] call_netdevice_notifiers net/core/dev.c:1990 [inline] unregister_netdevice_many+0x92e/0x1890 net/core/dev.c:10751 default_device_exit_batch+0x449/0x590 net/core/dev.c:11245 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 The buggy address belongs to the object at ffff88807d37b900 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 4 bytes inside of 64-byte region [ffff88807d37b900, ffff88807d37b940) The buggy address belongs to the physical page: page:ffffea0001f4dec0 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d37b180 pfn:0x7d37b flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffff888010c41340 ffffea0001c795c8 ffff888010c40200 raw: ffff88807d37b180 ffff88807d37b000 000000010000001f 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x342040(__GFP_IO|__GFP_NOWARN|__GFP_COMP|__GFP_HARDWALL|__GFP_THISNODE), pid 2963, tgid 2963 (udevd), ts 139732238007, free_ts 139730893262 prep_new_page mm/page_alloc.c:2441 [inline] get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408 __alloc_pages_node include/linux/gfp.h:587 [inline] kmem_getpages mm/slab.c:1378 [inline] cache_grow_begin+0x75/0x350 mm/slab.c:2584 cache_alloc_refill+0x27f/0x380 mm/slab.c:2957 ____cache_alloc mm/slab.c:3040 [inline] ____cache_alloc mm/slab.c:3023 [inline] __do_cache_alloc mm/slab.c:3267 [inline] slab_alloc mm/slab.c:3309 [inline] __do_kmalloc mm/slab.c:3708 [inline] __kmalloc+0x3b3/0x4d0 mm/slab.c:3719 kmalloc include/linux/slab.h:586 [inline] kzalloc include/linux/slab.h:714 [inline] tomoyo_encode2.part.0+0xe9/0x3a0 security/tomoyo/realpath.c:45 tomoyo_encode2 security/tomoyo/realpath.c:31 [inline] tomoyo_encode+0x28/0x50 security/tomoyo/realpath.c:80 tomoyo_realpath_from_path+0x186/0x620 security/tomoyo/realpath.c:288 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x21b/0x400 security/tomoyo/file.c:822 security_inode_getattr+0xcf/0x140 security/security.c:1350 vfs_getattr fs/stat.c:157 [inline] vfs_statx+0x16a/0x390 fs/stat.c:232 vfs_fstatat+0x8c/0xb0 fs/stat.c:255 __do_sys_newfstatat+0x91/0x110 fs/stat.c:425 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1356 [inline] free_pcp_prepare+0x549/0xd20 mm/page_alloc.c:1406 free_unref_page_prepare mm/page_alloc.c:3328 [inline] free_unref_page+0x19/0x6a0 mm/page_alloc.c:3423 __vunmap+0x85d/0xd30 mm/vmalloc.c:2667 __vfree+0x3c/0xd0 mm/vmalloc.c:2715 vfree+0x5a/0x90 mm/vmalloc.c:2746 __do_replace+0x16b/0x890 net/ipv6/netfilter/ip6_tables.c:1117 do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] do_ip6t_set_ctl+0x90d/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1026 tcp_setsockopt+0x136/0x2520 net/ipv4/tcp.c:3696 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff88807d37b800: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ffff88807d37b880: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc >ffff88807d37b900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff88807d37b980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88807d37ba00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc Fixes: c85bb41e9318 ("igmp: fix ip_mc_sf_allow race [v5]") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Flavio Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/igmp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 381fc854ad19..75f961425639 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -2360,9 +2360,10 @@ int ip_mc_source(int add, int omode, struct sock *sk, struct newpsl->sl_addr[i] = psl->sl_addr[i]; /* decrease mem now to avoid the memleak warning */ atomic_sub(IP_SFLSIZE(psl->sl_max), &sk->sk_omem_alloc); - kfree_rcu(psl, rcu); } rcu_assign_pointer(pmc->sflist, newpsl); + if (psl) + kfree_rcu(psl, rcu); psl = newpsl; } rv = 1; /* > 0 for insert logic below if sl_count is 0 */ @@ -2460,11 +2461,13 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex) psl->sl_count, psl->sl_addr, 0); /* decrease mem now to avoid the memleak warning */ atomic_sub(IP_SFLSIZE(psl->sl_max), &sk->sk_omem_alloc); - kfree_rcu(psl, rcu); - } else + } else { (void) ip_mc_del_src(in_dev, &msf->imsf_multiaddr, pmc->sfmode, 0, NULL, 0); + } rcu_assign_pointer(pmc->sflist, newpsl); + if (psl) + kfree_rcu(psl, rcu); pmc->sfmode = msf->imsf_fmode; err = 0; done: From 1bb717ac513e148032a4b14699eed98ee9850ba3 Mon Sep 17 00:00:00 2001 From: Sandipan Das Date: Wed, 27 Apr 2022 17:01:49 +0530 Subject: [PATCH 62/67] kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU [ Upstream commit 5a1bde46f98b893cda6122b00e94c0c40a6ead3c ] On some x86 processors, CPUID leaf 0xA provides information on Architectural Performance Monitoring features. It advertises a PMU version which Qemu uses to determine the availability of additional MSRs to manage the PMCs. Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for the same, the kernel constructs return values based on the x86_pmu_capability irrespective of the vendor. This leaf and the additional MSRs are not supported on AMD and Hygon processors. If AMD PerfMonV2 is detected, the PMU version is set to 2 and guest startup breaks because of an attempt to access a non-existent MSR. Return zeros to avoid this. Fixes: a6c06ed1a60a ("KVM: Expose the architectural performance monitoring CPUID leaf") Reported-by: Vasant Hegde Signed-off-by: Sandipan Das Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin --- arch/x86/kvm/cpuid.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index a6f8600672d7..c068027ac55f 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -502,6 +502,11 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, union cpuid10_eax eax; union cpuid10_edx edx; + if (!static_cpu_has(X86_FEATURE_ARCH_PERFMON)) { + entry->eax = entry->ebx = entry->ecx = entry->edx = 0; + break; + } + perf_get_x86_pmu_capability(&cap); /* From 2b29404f4eea7da878a8a8c5b301d9adf6f56d55 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 2 May 2022 17:49:24 -0300 Subject: [PATCH 63/67] net: sched: prevent UAF on tc_ctl_tfilter when temporarily dropping rtnl_lock When dropping the rtnl_lock for looking up for a module, the device may be removed, releasing the qdisc and class memory. Right after trying to load the module, cl_ops->put is called, leading to a potential use-after-free. Though commit e368fdb61d8e ("net: sched: use Qdisc rcu API instead of relying on rtnl lock") fixes this, it involves a lot of refactoring of the net/sched/ code, complicating its backport. This fix calls cl_ops->put before dropping rtnl_lock as it will be called either way, and zeroes it out so it won't be called again on the exit path. This has been shown to stop the following KASAN report with the reproducer: [ 256.609111] ================================================================== [ 256.609585] BUG: KASAN: use-after-free in cbq_put+0x20/0xd0 at addr ffff880021daaba0 [ 256.610078] Read of size 4 by task total_cbq/11184 [ 256.610380] CPU: 0 PID: 11184 Comm: total_cbq Not tainted 4.9.311 #78 [ 256.610778] ffff8800215875a8 ffffffff96e18735 ffff880024803080 ffff880021daaa80 [ 256.611274] ffff8800215875d0 ffffffff96334841 ffffed00043b5574 ffffed00043b5574 [ 256.611768] ffff880024803080 ffff880021587658 ffffffff96334af8 0000000000000000 [ 256.612186] Call Trace: [ 256.612344] [] dump_stack+0x6d/0x8b [ 256.612632] [] kasan_object_err+0x21/0x70 [ 256.612973] [] kasan_report.part.1+0x218/0x4f0 [ 256.613349] [] ? cbq_put+0x20/0xd0 [ 256.613634] [] ? kasan_unpoison_shadow+0x36/0x50 [ 256.613993] [] kasan_report+0x25/0x30 [ 256.614288] [] __asan_load4+0x61/0x80 [ 256.614580] [] cbq_put+0x20/0xd0 [ 256.614862] [] tc_ctl_tfilter+0x4f4/0xb80 [ 256.615151] [] ? tfilter_notify+0x140/0x140 [ 256.615478] [] ? do_syscall_64+0xef/0x190 [ 256.615799] [] ? entry_SYSCALL_64_after_swapgs+0x58/0xc6 [ 256.616190] [] ? sock_sendmsg+0x76/0x80 [ 256.616484] [] ? sock_write_iter+0x13f/0x1f0 [ 256.616833] [] ? __vfs_write+0x262/0x3c0 [ 256.617152] [] ? vfs_write+0xf9/0x260 [ 256.617451] [] ? SyS_write+0xc9/0x1b0 [ 256.617754] [] ? ns_capable_common+0x5a/0xa0 [ 256.618067] [] ? ns_capable+0x13/0x20 [ 256.618334] [] ? __netlink_ns_capable+0x6d/0x80 [ 256.618666] [] rtnetlink_rcv_msg+0x1af/0x410 [ 256.618969] [] ? netlink_compare+0x5b/0x70 [ 256.619295] [] ? rtnl_newlink+0xc60/0xc60 [ 256.619587] [] ? __netlink_lookup+0x1a4/0x240 [ 256.619885] [] ? netlink_broadcast+0x20/0x20 [ 256.620179] [] netlink_rcv_skb+0x155/0x190 [ 256.620463] [] ? rtnl_newlink+0xc60/0xc60 [ 256.620748] [] rtnetlink_rcv+0x28/0x30 [ 256.621015] [] netlink_unicast+0x2f1/0x3b0 [ 256.621354] [] ? netlink_attachskb+0x340/0x340 [ 256.621765] [] netlink_sendmsg+0x56e/0x6f0 [ 256.622181] [] ? netlink_unicast+0x3b0/0x3b0 [ 256.622578] [] ? netlink_unicast+0x3b0/0x3b0 [ 256.622893] [] sock_sendmsg+0x76/0x80 [ 256.623157] [] sock_write_iter+0x13f/0x1f0 [ 256.623440] [] ? sock_sendmsg+0x80/0x80 [ 256.623729] [] ? iov_iter_init+0x82/0xc0 [ 256.624006] [] __vfs_write+0x262/0x3c0 [ 256.624274] [] ? default_llseek+0x120/0x120 [ 256.624566] [] ? common_file_perm+0x92/0x170 [ 256.624925] [] ? rw_verify_area+0x78/0x140 [ 256.625277] [] vfs_write+0xf9/0x260 [ 256.625593] [] SyS_write+0xc9/0x1b0 [ 256.625891] [] ? SyS_read+0x1b0/0x1b0 [ 256.626154] [] ? SyS_read+0x1b0/0x1b0 [ 256.626422] [] do_syscall_64+0xef/0x190 [ 256.626697] [] entry_SYSCALL_64_after_swapgs+0x58/0xc6 [ 256.627033] Object at ffff880021daaa80, in cache kmalloc-512 size: 512 [ 256.627415] Allocated: [ 256.627563] PID = 164 [ 256.627711] save_stack_trace+0x1b/0x20 [ 256.627947] save_stack+0x46/0xd0 [ 256.628151] kasan_kmalloc+0xad/0xe0 [ 256.628362] kmem_cache_alloc_trace+0xe8/0x1e0 [ 256.628637] cbq_change_class+0x8b6/0xde0 [ 256.628896] tc_ctl_tclass+0x56a/0x5b0 [ 256.629129] rtnetlink_rcv_msg+0x1af/0x410 [ 256.629380] netlink_rcv_skb+0x155/0x190 [ 256.629621] rtnetlink_rcv+0x28/0x30 [ 256.629840] netlink_unicast+0x2f1/0x3b0 [ 256.630066] netlink_sendmsg+0x56e/0x6f0 [ 256.630263] sock_sendmsg+0x76/0x80 [ 256.630456] sock_write_iter+0x13f/0x1f0 [ 256.630698] __vfs_write+0x262/0x3c0 [ 256.630918] vfs_write+0xf9/0x260 [ 256.631123] SyS_write+0xc9/0x1b0 [ 256.631327] do_syscall_64+0xef/0x190 [ 256.631553] entry_SYSCALL_64_after_swapgs+0x58/0xc6 [ 256.631827] Freed: [ 256.631931] PID = 164 [ 256.632048] save_stack_trace+0x1b/0x20 [ 256.632241] save_stack+0x46/0xd0 [ 256.632408] kasan_slab_free+0x71/0xb0 [ 256.632597] kfree+0x8c/0x1a0 [ 256.632751] cbq_destroy_class+0x85/0xa0 [ 256.632948] cbq_destroy+0xfa/0x120 [ 256.633125] qdisc_destroy+0xa1/0x140 [ 256.633309] dev_shutdown+0x12d/0x190 [ 256.633497] rollback_registered_many+0x43c/0x5b0 [ 256.633753] unregister_netdevice_many+0x2c/0x130 [ 256.634041] rtnl_delete_link+0xb3/0x100 [ 256.634283] rtnl_dellink+0x19c/0x360 [ 256.634509] rtnetlink_rcv_msg+0x1af/0x410 [ 256.634760] netlink_rcv_skb+0x155/0x190 [ 256.635001] rtnetlink_rcv+0x28/0x30 [ 256.635221] netlink_unicast+0x2f1/0x3b0 [ 256.635463] netlink_sendmsg+0x56e/0x6f0 [ 256.635700] sock_sendmsg+0x76/0x80 [ 256.635915] sock_write_iter+0x13f/0x1f0 [ 256.636156] __vfs_write+0x262/0x3c0 [ 256.636376] vfs_write+0xf9/0x260 [ 256.636580] SyS_write+0xc9/0x1b0 [ 256.636787] do_syscall_64+0xef/0x190 [ 256.637013] entry_SYSCALL_64_after_swapgs+0x58/0xc6 [ 256.637316] Memory state around the buggy address: [ 256.637610] ffff880021daaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 256.638047] ffff880021daab00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 256.638487] >ffff880021daab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 256.638924] ^ [ 256.639186] ffff880021daac00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 256.639624] ffff880021daac80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Thadeu Lima de Souza Cascardo --- net/sched/cls_api.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index c1a4b5d30814..330a2c9d1907 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -268,10 +268,13 @@ static int tc_ctl_tfilter(struct sk_buff *skb, struct nlmsghdr *n) err = -ENOENT; tp_ops = tcf_proto_lookup_ops(tca[TCA_KIND]); if (tp_ops == NULL) { -#ifdef CONFIG_MODULES struct nlattr *kind = tca[TCA_KIND]; char name[IFNAMSIZ]; + if (cl) + cops->put(q, cl); + cl = 0; +#ifdef CONFIG_MODULES if (kind != NULL && nla_strlcpy(name, kind, IFNAMSIZ) < IFNAMSIZ) { rtnl_unlock(); From 9a8736b2da28b24f01707f592ff059b9f90a058c Mon Sep 17 00:00:00 2001 From: "j.nixdorf@avm.de" Date: Thu, 24 Feb 2022 10:06:49 +0100 Subject: [PATCH 64/67] net: ipv6: ensure we call ipv6_mc_down() at most once commit 9995b408f17ff8c7f11bc725c8aa225ba3a63b1c upstream. There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything Fixes: 3ce62a84d53c ("ipv6: exit early in addrconf_notify() if IPv6 is disabled") Signed-off-by: Johannes Nixdorf Signed-off-by: David S. Miller [jnixdorf: context updated for bpo to v4.9/v4.14] Signed-off-by: Johannes Nixdorf Signed-off-by: Greg Kroah-Hartman --- net/ipv6/addrconf.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 6119ab33a56e..30ca73c78125 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3539,6 +3539,7 @@ static int addrconf_ifdown(struct net_device *dev, int how) struct list_head del_list; int _keep_addr; bool keep_addr; + bool was_ready; int state, i; ASSERT_RTNL(); @@ -3602,7 +3603,10 @@ static int addrconf_ifdown(struct net_device *dev, int how) addrconf_del_rs_timer(idev); - /* Step 2: clear flags for stateless addrconf */ + /* Step 2: clear flags for stateless addrconf, repeated down + * detection + */ + was_ready = idev->if_flags & IF_READY; if (!how) idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD|IF_READY); @@ -3689,7 +3693,7 @@ static int addrconf_ifdown(struct net_device *dev, int how) if (how) { ipv6_ac_destroy_dev(idev); ipv6_mc_destroy_dev(idev); - } else { + } else if (was_ready) { ipv6_mc_down(idev); } From 9fb7cd5c7fef0f1c982e3cd27745a0dec260eaed Mon Sep 17 00:00:00 2001 From: Jiazi Li Date: Wed, 29 Sep 2021 19:59:28 +0800 Subject: [PATCH 65/67] dm: fix mempool NULL pointer race when completing IO commit d208b89401e073de986dc891037c5a668f5d5d95 upstream. dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io(). Cc: stable@vger.kernel.org Signed-off-by: Jiazi Li Signed-off-by: Mike Snitzer Signed-off-by: Mikulas Patocka Reviewed-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index dd154027adc9..86199d09eb06 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -524,20 +524,19 @@ static void start_io_acct(struct dm_io *io) false, 0, &io->stats_aux); } -static void end_io_acct(struct dm_io *io) +static void end_io_acct(struct mapped_device *md, struct bio *bio, + unsigned long start_time, struct dm_stats_aux *stats_aux) { - struct mapped_device *md = io->md; - struct bio *bio = io->bio; - unsigned long duration = jiffies - io->start_time; + unsigned long duration = jiffies - start_time; int pending; int rw = bio_data_dir(bio); - generic_end_io_acct(rw, &dm_disk(md)->part0, io->start_time); + generic_end_io_acct(rw, &dm_disk(md)->part0, start_time); if (unlikely(dm_stats_used(&md->stats))) dm_stats_account_io(&md->stats, bio_data_dir(bio), bio->bi_iter.bi_sector, bio_sectors(bio), - true, duration, &io->stats_aux); + true, duration, stats_aux); /* * After this is decremented the bio must not be touched if it is @@ -768,6 +767,8 @@ static void dec_pending(struct dm_io *io, int error) int io_error; struct bio *bio; struct mapped_device *md = io->md; + unsigned long start_time = 0; + struct dm_stats_aux stats_aux; /* Push-back supersedes any I/O errors */ if (unlikely(error)) { @@ -793,8 +794,10 @@ static void dec_pending(struct dm_io *io, int error) io_error = io->error; bio = io->bio; - end_io_acct(io); + start_time = io->start_time; + stats_aux = io->stats_aux; free_io(md, io); + end_io_acct(md, bio, start_time, &stats_aux); if (io_error == DM_ENDIO_REQUEUE) return; From 7bb369096d1711d28cda36853f8e1920bbe3e86d Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 17 Feb 2022 23:40:02 -0500 Subject: [PATCH 66/67] dm: interlock pending dm_io and dm_wait_for_bios_completion commit 9f6dc633761006f974701d4c88da71ab68670749 upstream. Commit d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO") didn't go far enough. When bio_end_io_acct ends the count of in-flight I/Os may reach zero and the DM device may be suspended. There is a possibility that the suspend races with dm_stats_account_io. Fix this by adding percpu "pending_io" counters to track outstanding dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also, rename md_in_flight_bios() to dm_in_flight_bios() and update it to iterate all pending_io counters. Fixes: d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO") Cc: stable@vger.kernel.org Co-developed-by: Mikulas Patocka Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Mikulas Patocka Reviewed-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 86199d09eb06..ec6c2b566621 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -2027,6 +2027,8 @@ static int dm_wait_for_completion(struct mapped_device *md, long task_state) } finish_wait(&md->wait, &wait); + smp_rmb(); /* paired with atomic_dec_return in end_io_acct */ + return r; } From ba9e8be3cfa31c2b7c0941e2dd7a11e86ef79672 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 12 May 2022 12:14:58 +0200 Subject: [PATCH 67/67] Linux 4.9.313 Link: https://lore.kernel.org/r/20220510130729.762341544@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Pavel Machek (CIP) Tested-by: Shuah Khan Tested-by: Guenter Roeck Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a9f16c9c9614..0c13bf09d17d 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 9 -SUBLEVEL = 312 +SUBLEVEL = 313 EXTRAVERSION = NAME = Roaring Lionus